This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The CONFIG_ prefixes were missing on these.
Found with a work-in-progress scripts/kconfig/lint.py check.
This symbol is defined in kernel/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2C interrupts usage should be the preferred way. This commit
enables them by default in the STM32 I2C driver itself.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONSOLE_HANDLER was unconditionally selecting UART_INTERRUPT_DRIVEN (and
depends on it in the code), but UART_INTERRUPT_DRIVEN depends on
SERIAL && SERIAL_SUPPORT_INTERRUPT.
Add a SERIAL_SUPPORT_INTERRUPT dependency to CONSOLE_HANDLER.
CONSOLE_HANDLER already depends on UART_CONSOLE, which depends on
SERIAL, so a SERIAL dependency does not need to be added.
This avoids some selects with unsatisfied dependencies in CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Silicon Labs EFM32GG11B SoCs have more USART ports than
currently supported by the driver. Driver expanded with
support for USART4 and USART5.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Ethernet MAC present in Silicon Labs EFM32GG11B4xx and
EFM32GG11B8xx SoCs.
DMA based driver with support for link up/down detection.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Define a binding for the Bosch BMA280 sensor. Remove the Kconfig
settings and update the driver to use the devicetree information.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After startup the native_posix flash was filed by 0x00 instead
of 0xff, which is not coherent with erased byte value which
is 0xff for the native_posix target.
Such inconsistent behavior makes for instance running
a storage system designed(or configured) for a flash device
with 0xff as erased byte values problematic.
This patch makes flash erased after new flash device file creation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The PrimeCell UART (PL011) IP can use one single combined/shared
interrupt line instead than different IRQ lines for TX/RX/Err/... This
is the most common configuration supported in the Linux world but not
currently supported in Zephyr. QEMU emulates a PL011 UART with a single
interrupt line as well.
To support this configuration we have to hookup the PL011 driver with a
shared IRQ driver and add two new configuration options when the shared
IRQ line is used.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There is only one possible command, so just use if instead of switch
to avoid several MISRA-C violations and also avoid set dev_data wrongly
unused when UART_NS16550_DLF_ENABLED is defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Commit 68a235932f changed this driver to
not use hard-coded options. The problem was that these options were
never being set. This commit just set an initial value that can be
changed later.
Fix 68a235932f
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The NS16550 UART driver is currently hard-coded as 8-n-1
with no flow control. The baud rate is set by what is in DTS.
This commit moves away from hard-coded and strictly DTS to
configurable using the UART configure API. Requires commit #bcb807.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The UART configure API was added to uart.h and this commit
implements the initial framework for the configure API for
the ns16550 uart. This includes the configure() and config_get()
functions and uart device configuration structures of the uart
configure API for the ns16550.
Note this commit does not resolve the pre-existing hard-coded
8-n-1 implementation.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Patch introduce references to LittleFS instead of NFFS where it
was suitable. In other places NFFS mentions were removed
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
According to NRF product specifications the smallest write unit is
32-bits. Added parameter 'CONFIG_EMULATE_ONE_BYTE_WRITE_ACCESS'
which allows one byte flash write using more complex operation.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Grouped all nRF driver sub-option under SOC_FLASH_NRF
menuconfig.
This makes menuconfig cleaner.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Create new instances of SPI using single STM32_SPI_INIT() macro
invocation, similar as it is done for STM32 UART driver. Add also
implicit '#ifdef CONFIG_SPI_id' check, so it further reduces required
lines of code for each SPI instance definition.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Update the NXP Kinetis FlexCAN driver to use the initialization
parameters for disabling self-reception and enabling listen-only mode
added in MCUXpresso v2.7.0.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
