move DT_DRV_COMPAT to bmm150.h. so that can be decide which interface
to use.
define struct bmm150_bus_io interface for bmm150_i2c.c and bmm150_spi.c
in bmm150.h.
redefined bus operation interface in bmm150.c, this allow the driver
to decide which interface to use during construction.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Convert the SDL driver to use the input subsystem. This is specifically
meant to emulate touchscreen drivers, so it's setup to send triplet of
x, y, touch for touch-on events and just touch off on touch off events.
Renamed the driver to input-sdl-touch since now we can also develop an
sdl driver for simulating key events.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes the wsen_tids sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the wsen_itds sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the wsen_hids sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the vcnl4040 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the tmp108 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the tmp007 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the sx9500 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the stts751 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the sm351lt sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the sht3xd sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the qdec_nrfx sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the pcnt_esp32 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the mpu9250 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the mpu6050 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the mcux_acmp sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the mcp9808 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This commit adds support for ANY_MOTION and DATA_READY interrupts for
the BMI270. To implement this, a different config blob than the
"max_fifo" blob has to be used.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
This adds the i2c driver for the Renesas SmartBond(tm) MCU family.
It supports blocking transfers and callback transfers.
Currently only supports controller mode.
Co-authored-by: Stan Geitel <stan@geitel.nl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Use recently introduced GENMASK64() macro. Although it does not make
difference for the target platform, it makes code clearer.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is currently the only end-point where multiple threads can access
the NVMe device (all calls are synchronous).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Pre-allocating PRP list for such purpose. Which PRP list is relevantly
filled in depending on the data size and data pointer page alignment.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Based on FreeBSD's implementation made by James Harris, Intel Copyright
2012-2016.
Namespace in this context, will be a disk. It's not exposed from DTS, as
an actualy NVMe hardware controller card can bring more than one
namespace (disk).
Thus namespace are not instanciated through the device driver model, but
statically allocated and runtime configured, depending on what the
controller exposes.
By default the amount of namespace supported is one as it is the most
common setup.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Based on FreeBSD's implementation made by James Harris, Intel Copyright
2012-2016.
This is the corner stone of the whole NVMe logic: sending commands and
getting replies, all through memory shared from the host to the
controller.
Then using it to inialize admit/IO queues and identifying the
controller.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Based on FreeBSD's implementation made by James Harris, Intel Copyright
2012-2016.
Since Zephyr does not propose any advanced interfaces as FreeBSD (bus
abstractions, memory and DMA abstraction and many more), this comes with
a much simplified and Zephyr-ish way to instanciate, initialize and use
NVMe controller.
ToDo: IO Queues cannot be more than 1. Macros will need to be improved to
manage the case of 2+ IO queues.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no event reporting WiFi disconnect, create a polling
work for this and report the event.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
It has been observed that sockets can be in bad state after
boot. Be sure to correctly reset local port and any 'server'
mode before configuring client mode.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
- We should wait indefinitely if msecs is -1 (FOREVER).
- We can directly return if data is already available in FIFO.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
There is no listen or accept for UDP, we need to enable the UDP
server mode (P5=1) as soon as bind is complete.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The implementation of GIC v3 ITS uses k_aligned_malloc(), which will
only work if dynamic memory is available (system heap). Tell the user
that a dynamic memory pool is required.
The amount of memory will depend on registers probed during runtime.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
CFG register uses fields that are not defined in Synopsys databook of
Designware AHB DMA Controller.
Since current Zephyr code uses this driver only for the
intel_adsp_gpdma driver I assume that those fields are specific to
this DMA which is not the standard Designware one.
This patch allows to use either the standard Designware register or
the Intel one.
Signed-off-by: Sylvain Chouleur <schouleur@graimatterlabs.ai>
There is no need to use *_cmp_raw() functions here, all they do is cast the
pointers to in(6)_addr* and call the non-raw functions. Additionally, this
fixes a warning for the net_ipv6_addr_cmp_raw() call, which didn't cast the
arguments correctly.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Syntacore RISC-V platforms have dedicated MTIMER_DIVIDER register which
should be configured during the Timer initialization.
The configuration of dedicated MTIMER_DIVIDER register could now
be performed during initialization if its address is provided.
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
This change adds a mutex to protect against simultaneous access to the bus
instead of returning an error during transfers. Since most I2C code doesn't
handle retries (especially with a -EIO code) not blocking on a mutex can
cause a number of problems.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
move DT_DRV_COMPAT to bmp388.h. so that can be decide which
interface to use.
define struct bmp388_bus_io interface bmp388_i2c.c and bmp388_spi.c.
redefined bus operation interface in bmp388.c, this allow the driver
to decide which interface to use during construction
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
This adds support for the -02 variant, as well as the existing -30.
The sensor type is automatically read from configuration register at
device init, an appropriate compensation func is set up
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
This adds a driver for the DS2482-800 1-wire multi channel bus driver.
The driver uses a split architecture in order to share a common lock
among all configured channels of a single IC.
Signed-off-by: Caspar Friedrich <c.s.w.friedrich@gmail.com>
ds248x no longer applies to all drivers. Therefore the naming indicates
compatibility with DS2482 and DS2484 drivers.
Also
- Fix some code formatting
Signed-off-by: Caspar Friedrich <c.s.w.friedrich@gmail.com>
With the stm32h5x, hal driver is xspi for octospi
Add a header file to map functions and constants.
The ospi driver of the stm32H5x serie does not support DMA yet.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
