rpi-hal function "uart_set_format" expects data width in the range
of 5..8. So I created a new function “uart_rpi_set_format” which
contains common parts of “uart_rpi_configure”.
Signed-off-by: Jan Hilsdorf <jan.hilsdorf@gmail.com>
There was a bunch of BDF lookup code in the ivshmem driver originating
from issues with not being able to have multiple PCIE_BDF_NONE entries
in DTS. Now that devices are always looked up based on VID/DID this
should not be an issue, and hence the additional code is not needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
TLB driver knows the required number of bytes for HPSRAM
storage during power off state.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
a small cleanup in the code, preaparation for memory context save
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
On ACE RSE bits should be cleared unconditionally
if ssp is no longer in use
This will allow to successfully disable SSP in
dai_ssp_pm_runtime_dis_ssp_power()
and enable it correctly in the next run
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Move the header file to corresponding directory which refers to
submodule name instead of root of drivers directory.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The functions for ec_host_cmd_periph are only used by statically defined
kernel thread and should never be used from other subsystem, especially
from userspace. This commit removes the syscalls prefixes from these
functions and leaves them as inline call to API implementations from
peripheral.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
RTC is 24 bit width and k_timer is 64 bit. It is hard to test corner
cases but RTC hardware feature can help here. There is a task which
moves counter to 0xfffff0 which is close to overflow. However, there
is an internal driver state that also needs to be aligned to shift
the time properly. Adding optional function which triggers overflow
and updates internal state. This can be used for testing corner cases.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added support for fxas21002 sensor over SPI and I2C.
Made the fxas driver APIs generic for I2C and SPI.
Tested with fxas21002 sensor on RDDRONE.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Sumit Batra <sumit.batra@nxp.com>
Added support for fxos8700 sensor over SPI and I2C.
Made the fxos driver APIs generic for I2C and SPI.
Tested with fxos8700 sensor on RDDRONE.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Sumit Batra <sumit.batra@nxp.com>
There is no DSPRA registers (0x71a60) in SOC Intel ACE.
Therefore this space should be not accessed. It is valid only
for some Intel CAVS SOC versions.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
This reverts changes introduced in commit
dd535f611d, as they broke the gsm_ppp
driver integration with PPP L2. Apparently, a more thorough
refactoring is needed to use the new interface management scheme with
PPP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Return correctly the number of received bytes for a
spi_transceive on a STM32 SPI slave.
Fixes#52216
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Since nRF IEEE 802.15.4 radio driver is now capable of calculating CSL
phase based on provided anchor time and CSL period, the CSL placeholder
window is no longer necessary. This commit removes it and switches to
the new calculation method.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The ptm.c driver never defined DT_DRV_COMPAT, so the various DT macros
never expanded to anything useful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BDF values can differ on the same platform, based on e.g. BIOS
configuration, and in the case of qemu the command line parameters. It's
therefore more reliable to always look up the BDF value based on the
known Vendor and Device IDs.
This patch introduces such a framework, and allows the incremental
update of PCIe drivers to start taking advantage of it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
`struct device::config` is a `const void *`, so this struct does not need
to be mutable.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Parts of the macro used `inst`, others `n` for the instance number; only
`n` was actually defined (so `inst` expanded to the empty string, causing
name errors with more than one instance).
Unify everything to `inst`.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add property mxicy,mx25r-power-mode to jedec,spi-nor binding for
controlling low power/high performance mode on Macronix MX25R* Ultra Low
Power flash devices.
- "low-power" configures the flash in ultra low power mode.
- "high-performance" configures the flash in high performance mode.
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Add a driver for the Arm Ethos-U NPU, including a Devicetree entry for
the mps3_an547 platform.
Signed-off-by: Kristofer Jonsson <kristofer.jonsson@arm.com>
Signed-off-by: Fredrik Knutsson <fredrik.knutsson@arm.com>
It was previously written as regular members of a struct, which
allows the C compiler to do things the way it wants. On ARM64, gcc
would typically write field by pairs (`STP`), which
would generate aborts.
By using `sys_write32`, we force it the right way.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
After a firmware update, DNS needs to be reconfigured.
Fix debug log for AT command strings.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
GPDMA should work with disabled interrupts in ctrl_lo
This also helps with stability in SOF scenarios
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
The sensor uses the ALERT terminology (pin can be configured to trigger
on certain events such as conversion ready or overvoltage alerts). The
"IRQ" name is not clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Specify the units of the current LSB in microamperes, so that we can
measure low maximum currents. Right now it was specified in
milliamperes, but ignored and always hardcoded to 1mA in the driver.
This makes the driver pretty much useless when the maximum current to be
measured is in a range of e.g. 20-50mA.
This patch also removes some unnecessary ifdeffery: since we write the
calibration register, we can always provice measurements with the right
units. It is also wrong to provide sensor readings that do not match
with the units specified by the channel. After this change voltage is
always reported in V, current in A and power in W.
Note that power measurement had the current LSB hardcoded in the
calculation (assuming 1mA/LSB), this has been fixed as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Following dtschema practices, add phyisical units to the shunt resistor
value: milliohms.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With the recent introduction of DT_HAS* Kconfig helpers, such build
asserts are highly unlikely, so just remove them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Driver had Doxygen stubs for sensor interface calls. First, most were
incomplete, outdated or just wrong. Second, implementations just need to
make sure to adhere to the error codes documented in the public
interface (sensor API in this case).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Add many missing includes so that headers are self-contained
- Sort includes properly (locals first, stdc, zephyr, etc.)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
