GD32V SoC uses divided clock from core-clock for machine timer clock.
Add config of clock divide factor to support GD32V.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
This commit introduces the following changes:
* nrf_rtc_timer is extended with a capability to handle RTC overflow,
allowing it to operate on absolute RTC ticks, rather than relative
ticks.
* overflow handling is ZLI-proof and relies on the sys clock
handler being executed twice every RTC counter's overflow.
* callbacks are given an absolute RTC tick value as a parameter instead
of CC register's value. The absolute RTC tick value is the RTC counter
value set during CC channel configuration extended to 64 bits.
* in case the timer's target time is in the past or is the current tick,
the timer fires as soon as possible, however still from the RTC's ISR
context.
* in case an active timer is set again with the same target time, it is
not scheduled again - only its event data is updated. Otherwise, the
timer is scheduled as usual.
* a scheduled timer can be aborted.
* system clock functions are now using 64 bit values internally.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
Added a driver to enable the GPT timer on RT1xxx parts to be used
instead of systick as a clock source. The timer is set to run in reset
mode, and uses the low frequency 32kHz oscillator for power savings
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The init responsibility moves to the drivers themselves. The npcx itim
initialize doesn't work now. This adds timer initialization for npcx
itim to fix it.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
A couple of drivers violated MISRA 5.7 rule (Tag name should be unique),
triggering CI compliance errors.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A Cortex-M specific function (sys_clock_isr()) was defined as a weak
function, so in practice it was always available when system clock was
enabled, even if no Cortex-M systick was available. This patch
introduces an auxiliary Kconfig option that, when selected, the ISR
function gets installed. External SysTick drivers can also make use of
this function, thus achieving the same functionality offered today but
in a cleaner way.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Remove the weak symbol definition
- Notify about the capability of disabling via a selected Kconfig option
(CONFIG_SYSTEM_TIMER_HAS_DISABLE_SUPPORT)
- Provide a dummy inline function when the functionality is not
available
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Split Kconfig into individual files for each driver. This improves
overall readability of the Kconfig options.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The weak symbol sys_clock_driver_init has been removed, therefore moving
the init responsability to the drivers themselves. As a result, the init
function has now been made static on all drivers and moved to the
bottom, following the convention used in other areas.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Each platform was defining its own shim.h header, with slightly
variant field definitions, for a register block that is almost
completely compatible between versions. This is made worse by the
fact that these represent an API imported fairly early from SOF, the
upstream version of which has since diverged.
Move the existing shim struct into a header ("cavs-shim.h") of its
own, remove a bunch of unused symbols, fill in definitions for some
registers that were left out, correct naming to match the hardware
docs in a few places, make sure all hardware dependencies are source
from devicetree only, and modify existing usage to use the new API
exclusively.
Interestingly this leaves the older shim.h header in place, as it
turns out to contain definitions for a bunch of things that were never
part of the shim register block. Those will be unified in separate
patches.
Finally: note that the existing IPM_CAVS_IDC driver (soon to be
removed from all the intel_adsp soc's) is still using the old API, so
redeclare the minimal subset that it needs for the benefit of the
platforms in transition.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Recent work to this platform added a new, cleaner low level API to the
interrupt controller. Replace the hand-cooked register access with
that. This is still not as good as having proper multicore support in
the intc_cavs driver, but it's at least better.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Clock ISR was running 2x the frequency.
Also fixes clock_get_cycle which was returning
wrong values.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The macro already mentions in the docstrings that PM is not supported:
"Invokes DEVICE_DEFINE() with no power management support".
This patch removed the PM entry from the macro and ajusts its uses.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In commit 918a574c88 ("clock: add k_cycle_get_64") this driver was
augmented with a count64() method to get a 64 bit cycle output from
the two-32-bit-word device registers.
Unfortunately it appeared to be trying to use a spinlock around the
two (low/high) reads to protect against overflow. But that doesn't
work: spinlocks protect against other CPU code using the same
spinlock, not against a hardware counter that is incrementing in real
time!
Thankfully there was already a count() routine in place that does a
detect-overflow-and-retry loop to solve this. Use that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This change adds `k_cycle_get_64()` on platforms that
support a 64-bit cycle counter.
The interface functions `arch_k_cycle_get_64()` and
`sys_clock_cycle_get_64()` are also introduced.
Fixes#39934
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Modification of the ARM architected timer driver and its configuration
data in order to address an erratum which exists at least in the Cor-
tex-A9 CPU, and which can also be observed in the QEMU implementation
of the Cortex-A9.
Comp.: ARM Cortex-A9 processors Software Developer Errata Notice
ARM document ID032315
Erratum 740657
This erratum causes a spurious interrupt pending indication with the
interrupt controller if no new compare value is written within the
timer ISR before the interrupt is cleared. This is usually the case
in tickless mode. If the spurious interrupt is not prevented, the
timer ISR will be called twice, but on second execution, the pending
flag is not set within the timer's register space. Not handling this
issue will lead to erratic tick announcements to the kernel.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all drivers settings having `[EXPERIMENTAL]` in their
prompt has has been updated to include `select EXPERIMENTAL` so that
developers can enable warnings when experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Timer STM32 LPTIM currently supports 2 clocks sources: LSE & LSI.
LSE (external) is defined as default but its availability depends
on board support package and then may not be available.
This ends up in situations where users have LSE implicitly selected
while no crystal is available on board, leading to non functional
LPTIM.
To avoid this situation, makes LSI clock, which is always available
(since internal to the SoC), the default LPTIM source clock.
Then, default case will be functional. Users will then be able to
select LSE if needed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
interrupt controller, also places its relevant
peripheral sources allowing drivers to use the
DT macros instead of espressif headers.
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
When SMP is enabled all the cores are announcing a tick and this is
causing too many ticks to be announced. Announce the tick even if this
is zero.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
If CYC_PER_TICK does not divide the (now - last_count) quantity exactly with integer math, the subsequent multiplication before incrementing last_count causes a drift. This commit eliminates the redundant division-followed-by-multiplication and fixes https://github.com/zephyrproject-rtos/zephyr/issues/37852
Signed-off-by: Berend Ozceri <berend@recogni.com>
This function wasn't being defined when SMP_BOOT_DELAY was set or when
SMP wasn't enabled. There's no reason for either, then function
doesn't depend on any kconfig-dependent build-time state, and (given
that we use -ffunction-sections) it won't appear in output binaries
unless called.
And there are use cases (e.g. z_smp_start_cpu()) where we need that
function even when BOOT_DELAY is enabled.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The free run timer will be used to count before entering hibernate
mode. Move the related registers to the head file for accessing.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
We add disable event timer at the beginning of critical section
for two reason:
1.For K_TICKS_FOREVER case: since no future timer interrupts
are expected or required, so we disable the event timer.
2.Others case: according it81202 spec, when timer enable bit
from 0->1, the timer will reload counts and start countdown.
Signed-off-by: Ruibin Chang <ruibin.chang@ite.com.tw>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add config macro to set interrupt as level triggered for ARM CPUs
Merge all timer configures into one place, then no need to overwrite
hpet_timer_conf_get/set() functions in SoC layer
Make hpet_timer_comparator_set() as the only register access function
to implemented in the SoC layer
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update Microchip XEC RTOS timer driver adding MEC172x support and
using more device tree properities in the driver. We must also update
the XEC counter driver to use the new GIRQ DT properties.
Add new properties to RTOS timer and RTC timer YAML. These two timers
are linked due to option using a high speed timer for kernel busy wait.
Add Kconfig logic for XEC RTOS timer to MEC172x SoC.
Enable the Microchip XEC RTOS timer in the MEC172x evaluation board.
Add device tree nodes for most peripeherals.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
z_smp_init() is only available if CONFIG_SMP is defined,
smp_timer_init() also depends on two Kconfig parameters. Also make it
conditional in cavs_timer.c. Also clarify some SMP-related comments
there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This converts register access from macro to functions.
This allows SoCs to override these functions if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the HPET timer to use kconfig to specify clock
frequency instead of relying on calculation at runtime.
When the frequency is known at build, this allow the toolchain
to optimize some calculations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames MIN_DELAY to HPET_CMP_MIN_DELAY, and also allows it
to be overridden. The default delay is for HPET with relative
high frequency, and may not suitable for all HPET
implementations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extracts the hard-coded value into a macro which can be
overridden. This is in preparation for SoCs where the period
is not in femptoseconds.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
RTC interrupt was reading CC value and passing it to the handler.
However, higher priority interrupt could preempt RTC interrupt
and set new CC value. In that case CC value read in the RTC
interrupt context was not the one that triggered the interrupt.
Added fallback to COUNTER value if that case is detected.
Using COUNTER is not as precise as CC because it returns time
when event was handled and not when event occured but it is the
only option since CC value is overwritten.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add NXP Kinetis Low Power Timer (LPTMR) OS timer driver shim. Since the
LPTMR does not support asynchronous changes to the timer period, only
non-tickless mode is supported.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For esp32c3 related ROM located functions instead
of esp32c3_rom.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
by adding the soc specific files such: soc initialization code,
linker scripts and support for esp32c3 devkitm
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
