'remap' value can never be REMAP_FULL for usart.
Fix this value depending on the usart instance.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Refactoring poll_out to be ready for handling preemption. uart_tx and
uart_fifo_fill modified so they are resilient to being preempted by
uart_poll_out.
Refactored uart_poll_out implementation to be common for interrupt
driven API and asynchronous API. In both APIs active state is detected
by evaluating state of ENDTX and TXSTOPPED events. If anyone is set it
means that new transfer can be started.
Patch is fixing existing issues:
- potential bytes dropping with flow control enabled
- busywaiting for ENDTX (asynchronous API) - poor performance
- potential bytes dropping during preemption
- potential uart_tx returning -EBUSY when interrupted poll_out
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to be in line with other DT_INST macros in zephyr code base,
swap the arguments order in following macro definitions:
*ST_STM32_DT_PINCTRL
*ST_STM32_DT_INST_PINCTRL
Update the users accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Current set of helpers provided for STM32 pinctrl devicetree are
using device instance as input.
In order to prepare for next version that will take node identifier
as input, change existing set of macros using _INST_ namespace.
Additionally rename NODE_ID_FROM_PINCTRL to
ST_STM32_DT_INST_NODE_ID_FROM_PINCTRL.
Finally update existing macros users to this new name scheme.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add const modifier for hal instances, clock devices pointer, and module
base address in npcx drivers to prevent driver functions change them
unexpectedly.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Make sure remap is disabled when not requested.
This should have no impact on current cases but is important
when dynamic pin configuration will be used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
This CL adds more comments for each macro functions used for device tree
file for better explanations. It also changes all hex values in soc.c to
lower case.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
On stm32f1 series, device pinctrl configuration could be modified
thanks to remapping capability.
Remapping allows to provide alternate pinctrl configuration to a
peripheral device and applies to all impacted pins.
So, specifically for stm32f1 series, apply remapping when required
before proceeding with pin configuration.
Additionally, because remapping is defined individually for each pin,
apply a function on pinctrl configuration to check remapping setting
coherency accorss pins.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This enables support for the confgure and config_get functions in
the UART API, allowing users to change baudrate, parity, stop bits,
data bits and flow control in runtime.
Signed-off-by: Jesper Derander <jesper.derander@endian.se>
Reset rx byte counters when hw timer/counter is disabled.
Fixes issue where disabling and re-enabling async uart rx can produce
"UART_RX_RDY" events with invalid data when power management is used.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Fixed 'line length exceeds 80 columns' warning by shortening the clock
controller device name from NPCX_CLOCK_CONTROL_NAME to
NPCX_CLK_CTRL_NAME.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add support for `CONFIG_UART_ASYNC_API` to the uart_rtt driver.
As RTT provides no mechanism for knowing when new data has arrived,
the reception commands all return errors.
This fixes hard faults when asynchronous calls are made on the uart_rtt
driver, in addition to providing a small level of functionality.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Instantiate RTT UART instances from devicetree nodes instead of from
Kconfig symbols. While RTT is implemented using software, not hardware,
it is emulating a hardware device, and thus should be configured through
devicetree. This allows the simulated UART device to be selected via
devicetree aliases and chosen nodes.
The following devicetree snippet will instantiate RTT channels 0 and 2
as UART devices.
```
/ {
rtt0: rtt_terminal {
compatible = "segger,rtt-uart";
label = "rtt_terminal";
status = "okay";
};
rtt2: rtt_secondary {
compatible = "segger,rtt-uart";
label = "rtt_app_specific";
status = "okay";
};
};
```
Fixes the RTT portion of #10621.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This CL configures the UART wake-up event triggered from a falling edge
(START condition) on CR_SIN pin. It also includes:
1. Introduce wui_maps property in yaml file to present relationship
between Wake-Up Input (WUI) and UART device.
2. Implement wake-up mechanism by MIWU api functions.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove the macros CLOCK_ID_PRFX2 and CLOCK_ID_PRFX and replace them with
_CONCAT from common.h.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Added support for hardware flow control in EFM32 UART driver.
Signed-off-by: Timo Dammes <timo.dammes@lemonbeat.com>
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Add IUART driver based on MCUX SDK. This driver is used to provide
serial console support on i.MX8M Mini SoC.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When uart_configure support was added uart_config_get was not
implemented. Move the 'struct uart_config' to uart_mcux_data lets us
save the uart_config settings and easily return it in
uart_mcux_config_get.
Fixes: #27420
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add example how to use gnome-terminal when launching a new
terminal for attaching the UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
uart_rx_enable might be called after reception is stopped by lack
of buffers with flow control enabled. In that case there is a couple
of bytes kept in the HW FIFO. When HW TIMER is used for byte counting,
it is using RXDRDY event to count bytes. RXDRDY event is generated when
byte is received in RXD. RXD is the head of HW FIFO. When DMA ends and
ENDRX event is generated, transmitter still transmits until RTS line
goes high and transmitter reacts to it and stops transmitting. First
byte received after ENDRX lands in RXD (and generates RXDRDY event),
next by goes to RXD+1 (does not generate RXRDY event).
RXDRDY event after ENDRX is counted by the TIMER. If TIMER is reset
before restarting RX this byte is lost in the calculation. Because of
that byte counters cannot be reset before enabling RX thus move to
initialization. It applies only to HW counting but to keep it consistent
resetting was removed for both modes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The USART_IntGet() function seems to return masked interrupts in the
function uart_gecko_irq_tx_ready() where it should return only
non-masked interrupts. Using USART_IntGetEnabled() fixes this issue.
This issue was discovered when using the mcumgr UART backend in the
uart_mcumgr_isr() function.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
The EFR32MG21 uses a different kind of GPIO routing for peripherals.
It is based on the GPIO registers and no longer peripherals' registers.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Removed potential race condition between uart being disabled and
rx_buf_rsp call.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added detection of uart_rx_buf_rsp call which happend to late when
uart is already disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When `CONFIG_UART_ASYNC_API` is enabled, cleanup any pending synchronous
receptions at initialization time. Pending receptions are present when
this driver is used with the default mcuboot application.
When `CONFIG_UART_ASYNC_API` is not enabled, RX is always enabled by
this driver. As mcuboot does not use the async API, and does not cleanup
the UART driver before jumping to the next application, that application
boots with RX still enabled. This results in a 500uA increase in current
consumption.
Fixes#26555
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Per the nrf9160 datasheet, UARTE must be disabled prior to configuring
PSEL.TXD, PSEL.RXD, PSEL.CTS, and/or PSEL.RTS. This also ensures that
any prior running code, such as a bootloader, which leaves the UART
enabled will not prevent the Zephyr application from changing the
configuration.
Make a similar change also to the uart_nrf_uart.c driver for the
nRF5 series.
Fixes 27080
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
