Fix incorrect ticker/mayfly user id used in scheduling the
abort of a radio event. Incorrect use of thread context as
the caller caused the abort function to be scheduled from
thread context while being called from ULL high context
level in reality. This could cause corruption of mayfly
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When flash driver requests abort of radio event in unreserved
time space, resume radio events in the pipeline were not
flushed. These resumed events caused flash driver to assert
on the check whether radio was in use.
Fixed by flushing the pipeline of all radio events, resume
and also those events in pipeline with pre-empt timeout
being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple simultaneous peripheral connections are
supported, restarting connectable advertising by host on
peripheral connection establishment failed in controller.
This prevented establishing new connections while first
connection was active.
The failure was caused by a bug in the way controller was
using quota for Rx PDU buffers. As the quota count was
release before the connection complete event rx PDU buffer
being released, the Rx PDUs needed to reserve for
connection complete event for new connectable advertising
was not available. This caused the connectable advertising
enable to fail.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use entropy driver directly in bt_rand instead of stitching together
calls to sys_rand32_get to improve efficiency. The use of
sys_rand32_get could also leak timestamps into keys.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added to allow vendor specific increase of user operation capacity for
ULL_HIGH, to support queuing additional ticker operations.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52811 Radio is similar to nRF52840 and exhibits
similar Radio Timings constants. We align the LE Coded
PHY (S2) RX chain delay with that of nRF52840, which,
eventually fixes the TIFS for nRF52811. In nRF52840 we
correct the inline comment only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We have introduced option HAS_HW_NRF_RADIO_BLE_CODED, which
reflects that an nRF SoC has a Radio with LE Coded PHY
capabilities. We now modify all #ifdef expressions for
Coded PHY in the nRF controller port, removing SOC_NRF52840
and adding this new option instead. This allows to build
an nRF controller with Coded PHY support for SOCs other
than nRF52840.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Relates to commit 76bfea7cf9 ("Bluetooth: controller: Ensure that a
`case` statement is present").
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When both central and peripheral are supported, one each Rx
node will be needed by connectable advertising and the
initiator to generate connection complete, hence
conditionally set the count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to abstract the use of software interrupts in nRF5
Series.
Also, reduce the number of SWI used when interrupt priority
level configured is same for ULL High and ULL Low contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit completes the refactoring of radio.c, so it
calls abstract functions for PPI handling for LE Coded
PHY (e.g. enable, disable channels, or configure endpoints),
which, then, call the platform-specific functions for PPI
handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h, conditionally, if we
build the controller with support for LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make the definitions of LE Coded PHY-specific macros
and inline functions conditional, i.e. only if we
actually build the controller with support for LE
Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors radio.c, so it calls abstract functions
for PPI handling (e.g. enable, disable channels, or configure
endpoints), which, then, call the platform-specific functions
for PPI handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines generic macros for the software interrupt
(SWI) IRQ lines that are used for LLL and ULL LOW interrupts.
This is done for both the cases of the legacy and new (split)
controller architectures. In addition, it abstracts some of
the functionality around software-IRQ signals, to generic
functions, which have platform-specific implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
This commit adds an explicit inclusion of toolchain.h from pdu.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by pdu.h;
these being not defined can easily go unnoticed and cause unexpected
behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove incorrect LL_ASSERT check in Lower Link Layer that
checked for invalid connection handle on reception of PDU.
The assert is not needed as PDUs can be received until the
Upper Link Layer is aware of the acknowledgement of the
terminate ind PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle data packet
enqueue being pause on Encryption Request be done early in
the ULL when enqueueing packets towards LLL.
Fixes#18645.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.chettimada@gmail.com>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Post Tx pool corruption fix, clean up code and add comments
explaining the use of Tx node next field used to indicate
the Tx node's allocation from Control or Data pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Tx FIFO, queue and pool corruption due to missing
release of link object to Tx link pool and hence missing
reset of the per connection initially allocated Tx link
free pointer.
The bug caused Tx PDUs and associated memory to be lost
leading to missing L2CAP segment transmissions. With lost
control PDU buffers, ULL would stall processing Done events
also leading to controller asserts.
Fixes#18546.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to conditional compile path ending in LL_ASSERT(0), the compiler
sees code following the assert as using uninitialized variables.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the pipeline prepare-resume implementation to correctly
handle multiple continuous events that request resume on
being pre-empted.
Symptoms of the bug being, when having continuous scanning,
and an active peripheral if a directed advertising is
started the peripheral event are not scheduled causing link
supervision timeout.
This is fixed by not having an enqueued resume event
prepared if there is an enqueued new non-resume event in the
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase pipeline size to accommodate probable multiple
prepare for directed advertising events, with reserved time
which are shorter than prepare duration, being enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the event start overhead time to accommodate for
processing time for dequeueing pipeline in Upper Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the maximum number of pending event done elements by
decoupling it from the maximum pipeline elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in the RPA timeout when no resolving entry exists in the
resolving list, and the advertiser was requested to use a local IRK
to generate it's own address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a fix to handle L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Relates to #17046.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug related to missing reset of packet timing
restriction variable.
Fixes BT LL TS 5.1.0 test:
LL/CON/SLA/BV-55-C [Initiating PHY Update Procedure - Packet
Time Restrictions, LE Coded]
Related to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
This fix with avoid states/roles from stepping on each
others event length. Connection would have supervision timed
out or have stalled data transmissions due to insufficient
reserved air time.
Relates to #15171.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of initiator to use correct anchor
tick and remainder microseconds when sending out CONNECT_REQ
PDU and then to scheduling the first connection event. This
is a fix when initiator is in continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in the ported code of the connection update, when
the slave events are skipped due to other overlapping state
or role the connection update at the instant used wrong
latency calculations. This lead to connection disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in controller checking ticker_id_prepare = 0 when
a scanner and connection are active, and the connection is
skipping events in order to resize Rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the reset of ticker_id_prepare variable to the early
return in event_connection_prepare function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port the implementation that does radio event abort due to
ISR latencies. The implementation measures if the ISR could
not meet the hard real time deadline and closes the event
early.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added interface to get Advertiser and Scanner instance
handle for use in Lower Link Layer module.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renames the "Blueooth Controller Assertion Handler" to "Application
Defined Assertion Handler" to better fit the purpose of the Kconfig
option.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool_base.h to sys/mempool_base.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a fix handling L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Moved and renamed ull_entropy_get to lll_entropy_get, placed under
vendor specific ll_sw. This is needed for SW implemented entropy,
to allow vendor implementation of faster, less secure random number
generator for randomizing ADV timing.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reversed revised ticker implementation pending new design which resolves
the issues described in GH issues #16830.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix pending Tx control buffer leak on supervision timeout.
Queued tx buffers in LLL consists of both data and control
PDUs but only data buffers got correctly released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Port the implementation that performed random backoff of
forced slave event scheduling.
When peer master implementation skips events, multiple
local overlapping slaves will randomize their forced
scheduling to break out of a round robin pattern increasing
the chance of synchronizing with their masters again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix scan requests being processed during directed advertisiments.
Directed advertise packets are not scannable
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add some missing fatal asserts that need to be caught to
avoid unexpected failures in the implementation of the
architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the tx_ack mfifo count to accomodate both data and
control PDUs being acknowledged.
With out this fix, pending maximum number of data plus
control PDUs in LLL on supervision timeout asserted due to
tx_ack mfifo overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the master clock drift.
Relates to #11764.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added an internal ull_update_mark function to detect race
conditions while stopping ticker instances during slave
drift, disconnection and connection update.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The the footer structure and extra bytes (rssi, resolving index etc.)
were overlapping in memory, rx_ftr was moved into the header, but the
extra and footer are still being read from the same place, extra was
written to the end. So this avoided memory corruption, but reading extra
reads wrong information.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compilation issues in central_hr or peripheral_hr sample when using
split LL and privacy is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The node_rx buffer does not contain the data from the connect ind, so
copy it over.
Also back up the adv pdu chan_sel bit so that it can be used to properly
select the correct channel selection algorithm
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The node_rx buffer for the connect ind buffer is being reused to send
connection complete event, make sure all data is backed up before
reusing the buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The privacy state variables rl_idx and rpa_gen was not initialized
properly, which results in connection failing to be established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
A conditional block to save a directed advertising report flag was
present three times. Remove two of the blocks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Port fix for #14044 from legacy LL to split LL.
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove comment stating that UNKNOWN_RSP during encryption procedure
is a workaround.
The core spec mandates that connections should not be dropped if
receiving this control packet during encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
The old footer was appended after PDU using pointer arithmetic. Now
the footer fields have been moved to the header struct, the
footer fields are now statically located in the data structure,
this is type safe and fields can be referred to by their actual
names rather than indirectly through reference to other members,
thus avoiding pointer arithmetic. Secondly, this change will pave
the way for adding other meta data in the future.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Relates to #15366.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the encryption setup queueing implementation to avoid
overlapping with local initiated Length Update Procedure.
Fixes#15733.
Relates to #15335, and #15186.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a follow up to commit 0eaa5e53a36af498115b4e56b1ea68cc89fc29ee.
`HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE` is a base number for two PPI
channels, so two bits need to be marked in the used channel bit mask.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Due to a protracted merge of:
5e38ed9320
the naming for the HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI changed
semnatics, now requiring use of
HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Disable the unsupported controller privacy feature in the
ULL/LLL split architecture implementation.
This feature will be enabled in the future when it has been
ported to support multiple vendor SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the support for Zephyr HCI Vendor-Specific Commands
and Event in the ULL/LLL split architecture implementation
of the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly defined Rx and Tx buffer sizes. Wrong
calculation allocated more memory than necessary.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig default values for ULL and LLL execution
priorities that caused build warnings when ranges changes
based on other priority values being selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect data type used in calculation of slot_us
detected by compiler, and reported as possible integer
overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compilation that caused compile
error when lll_scan structure did not contain connection
context included which is needed only for central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570, and #15727.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Increase the resolution of advertising random delay from
1 ms unit to 1 ticker unit.
Relates to #10289, #10391, and #10398.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix XTAL advanced feature by adding the missing
implementation to calculate and, retain or release the XTAL
clock source after a Bluetooth state or role is stopped.
Fixes#15817.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to toggle GPIO Debug pins on HFCLK
request and release by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented ULL to yield from processing in an infinite loop
if current PDU being handled is deferred.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
In ull.c ll_rx_get, a configuration without CONFIG_BT_CONN would
sometimes return an uninitialized node_rx.
In ull_scan.c, the scanning channel was not initialized to 0 (37). This
would cause new scanning to start at random index (0,1,2).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add defines to support updated slot reservation calculation in advertise
Note: Numbers used in added defines are subject to HW specific tuning
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added a new define (EVENT_IFS_US) to pdu.h - this is now used instead of
previous TIFS_US from vendor specific header
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Correct slot reservation time calc for legacy advertise
Add dependency on data lengths for advertise and scan response
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix regression by the addition of CONFIG_BT_CONN conditional
compilation that disabled the advanced clock (crystal)
oscillator management when only observer and/or advertiser
states supported in the controller build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to pause data PDU transmission during
PHY update procedure in order to comply to BT Spec. v5.1
Vol.6, Part B, Section 5.1.10.1 Packet transmit time
restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactoring to move PKT_US into ULL internal header,
and rename ull_conn_allowed_check to ull_conn_llcp_req.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to make start encryption
queueable if there is any control procedure in progress.
The context related to encryption procedure is now shared so
that it will be used after the ongoing procedure completes.
The fix here maintains the old functionality of serializing
the queued data and LL Encryption Request PDU, so that data
queued before start encryption is acknowledged.
Fixes#15012.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Send unknown rsp instead of asserting when encryption related control
PDUs are received in the wrong state.
This would allow an attacker to intentionally crash the device.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the Length request procedure from initiating during the encryption
procedue. This would cause the peer to disconnect the link with error
code LMP_TRANSACTION_COLLISION
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the encryption procedure pending and start it as soon as
there are no other procedures running.
This allows the Host to enqueue the encryption procedure, and not
get disallowed command because a different LL procedure is active.
Fixes#15012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The fix done in #14938 introduced a later assert when raising an HCI
event for the procedure that was terminated during the procedure
collision handling. This assert happens because the unknown rsp
has information that is needed when raising the event.
Solve this by copying the scratch packet into the node buffer so that
we keep the data.
Fixes#15183
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Fixes#14044
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix a bug where the controller would use the length
field of the advertisement packet before checking
if the length field was valid.
It is possible that the controller has received a packet
that passes CRC check but has a length field that is invalid.
This would cause the scanner to overwrite the scan report
buffer
Fixes: #14741
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
BT_WARN() should only be used for log messages that may indicate a
problem. However, the controller HCI code was using it for messages
that were of a pure debugging/informational nature. Convert these to
BT_DBG() instead - this should hopefully also help avoid unnecessary
user questions of seemingly alarming log messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The 2M and Coded PHY bit should not be set when the
PHY update procedure is not supported.
Fixes#14658
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Peer side will disconnect if controller initiates
Encryption procedure before PHY update procedure
has finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in LL encryption procedure, controller was
using the wrong pointer to connection state.
Function event_enc_prep is called from
slave_event_prepare, where _radio.curr_conn has not
been assigned yet.
The connection ended up sending LL_START_ENC_RSP
unencrypted, resulting in disconnect on the peer
side with reason MIC failure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation to correctly return the configured
default Tx Power Level.
Also, fix the missing use of RADIO_TXP_DEFAULT in the new
ULL/LLL implementation of Advertiser and Observer states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation in controller to use range delay
alongwith the active clock accuracy jitter.
Range has been hard coded to 1000 meters, suffices
modules out in the market.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to regression the option to enable PHY Update Procedure
on proprietary 2M PHY for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround from asserting when Rx PDU buffers from pool
needing resize is acquired by another connection. By
skipping the connection events to give some headroom for
the host to process the Rx packets and eventually make the
pool available for resize.
Fixes#11841.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use reverse order for bitfields on big-endian architectures. Treat
all PDU data as little-endian and add conversions as needed. Treat
access address as 4-byte value instead of u32_t to avoid flipping
endianness.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
This moves the vendor-specific HCI command/event configuration
definitions out of bluetooth/common into bluetooth. This allows
the controller itself to indicate its support for vendor-specific
commands/events.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Due to regression the option to enable Data Length Update
Procedure for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Some old peer central controllers respond with Unknown
Response PDU to our local Slave Initiated Feature Request
after the peer initiated the Encryption Setup Procedure.
The peer has voilated the Bluetooth Specification by sending
the Unknown Response during the Encryption Setup Procedure,
but as a workaround to IOP with such controller our local
implementation is updated to not disconnect the connection
but accept the voilating Unknown Response PDU.
Relates to #12362.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
mem_pdu_rx is not runtime resized meaning PDU_RX_SIZE_MIN is no longer
relevant.
Dynamic resizing was a left-over from the old bt controller.
Its size field was only ever set to PDU_RX_SIZE_MIN.
PDU_RX_SIZE_MIN only accounted for advertise PDUs.
So we remove size field from mem_pdu_rx.
However, the rest of the BT controller expects to be able to pull
RX_CNT-number of valid nodes from the pool at init/reset (rx_alloc)
time. This will fail unless we inflate the capacity by one.
To avoid inflation-by-one, mem_* would have to be rewritten to avoid
always-one-extra pattern.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Refactor PDU_RX_POOL_SIZE into its constituents and name each term.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix a bug in Encryption Procedure feature conditional
compile which prevent any data transfer when the feature was
disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
* Slight tweaks to memq comments,
* Document most of mfifo through commentary.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* Clarify certain functions and data structures in upper link layer.
* Disambiguate node rx event done, add commentary.
MFIFO_DEQUEUE macro does string concatenation.
Thus MFIFO_DEQUEUE(done) does not refer to done (the stack local), but
mfifo_done.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
ull_ref_inc already existed, but not ull_ref_dec.
No functional change expected.
Consistency is preferred due to code navigation.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Rename ull_tx_ack_put to ll_tx_ack_put as ack is enqueued
into LL thread context from ULL ISR context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move PKT_US definition from LLL header file to ULL header so
as to share it across vendors.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error due to missing conditional compile of
connection related code when selecting only observer state
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Return meaninful HCI error when it's not possible to start advertising
because of maximum number of connections already in use.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Remove the redundant proof of concept template temporary
role implementation from the repository.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During regression testing of PA/LNA feature it was noticed
that compilation failed due to missing port of the code
conditionally compiled for PA/LNA feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It's more natural to use net_buf_pull_mem() for the HCI command
parsing. Note that this also fixes a bug in hci_cmd_handle() where it
would previously check for sufficient parameter length with the
command header still included in the buffer (which it shouldn't have
been).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix the control procedure context safety by adding checks in
thread mode control path to detect pre-emption by interrupt.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a squash merge of commits introducing the new split
Upper Link Layer and Lower Link Layer architecture of the
Bluetooth Low Energy controller.
This introduces a new, improved Link Layer based on the
concept of split responsibilities; The Upper Link Layer
(ULL) is in charge of control procedures, inter-event
scheduling and overall role management. The code for the
ULL is shared among all hardware implementations. The
Lower Link Layer (LLL) is responsible for the intra-event
scheduling and vendor specific radio hardware access.
The communication between ULL and LLL is achieved through
a set of FIFOs that contain both control and data packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Missing updates to old architecture implementation towards
introduction of new ULL LLL architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the internal LL interfaces to have return value
to match the HCI error code u8_t data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use fixed-width type instead of enum for field op in struct
ticker_user_op to avoid struct layout differences between
compilers. Also make check whether struct sizes match size definitions
build-time asserts.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Adds documentation-commentary to some infrastructure used by the LL.
It is a long-term effort to better document the LL.
Notably ticker and mayfly require more documentation; this will be
done later.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa@gmail.com>
Fix in the do_ecb() function
In real HW this function busy waits for the ECB to be done.
In simulation with the POSIX arch a WFE was added to avoid that
infinite loop.
But this function is called with the ECB interrupts disabled.
In normal builds other interrupts will awake the CPU very soon
after entering into that WFE, and the problem was not discovered.
But, in controller only builds, during some conformance tests,
the loop will hang as no other interrupts are coming.
=> Replace the WFE() with a k_busy_wait (only for simulation)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix channel map update procedure implementation's handling
of different transaction collision by not asserting but
disconnecting the connection due to invalid behavior by
peer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updated controller implementation to disallow disabling
initiator state using scan disable. But allow disabling an
already disabled scan state. Also, disallow enabling scan
state while in initiator state.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The channels assigned to the controller are reordered so that the ones
previously used and now available for other purposes have continuous
numbers. When the controller can take advantage of the pre-programmed
PPI channels (when TIMER0 is used as the event timer), the now free
channels are 0-4, when it cannot, it is the channel 0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Several PPI channels in nRF5 family SoCs are pre-programmed with fixed
settings. A few of them can be used in the bluetooth controller instead
of the freely programmable ones that are used currently. This commit
makes such replacements where possible so that the universal channels
can be left available for other purposes.
This commit also removes macros used previously in calls to functions
enabling and disabling particular PPI channels (as it is sufficient
to use the BIT macro to set bits corresponding to the channel numbers)
to prevent such problems like the one introduces by commit
9d1ca9c390 (channel 18 changed to 17
but the related macro definition not updated).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for exchanging both minimum and maximum
connection interval values in Connection Parameter Request
Procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix an integer overflow in the scheduling implementation
that calculates whether resources required for next radio
event be retained.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit optimizes access to RNG driver by taking advantage
of the data structures layout. As result, number of calls to RNG
driver is reduced.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The bluetooth controller has been using the flag '-Ofast' to keep
within a real-time limit. There are two problems with this; firstly,
when a project should be optimized for size it is standard to use -O2,
not -Ofast.
Secondly, optimization flags have been deemed to be non-portable, so
instead of directly using "-Ofast" we should use the intent-macro
OPTIMIZE_FOR_SPEED_FLAG to ensure toolchain portability.
Testing has shown that we are still within the real-time limit when
changing from -Ofast to -O2. -Ofast is about 1us and 1% faster, but
increases the code size by 13kB (5% of the available flash on a
nRF51).
Since the slowdown is comparatively small compared to the code size
increase we have decided to use -O2 in place of -Ofast.
Other optimization combinations were also measured and their results
can be seen below:
-Ofast in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 45, 132.
-O2 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 125840 B 256 KB 48.00%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 51, 133
-O3 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 50, 132.
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SIZE_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 120124 B 256 KB 45.82%
[bt] [ERR] isr_rx_conn: assert: '!radio_is_ready()' failed
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SPEED_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 138004 B 256 KB 52.64%
[bt] [INF] encode_control: l: 6, 6, 7; t: 61, 51, 130.
NB: RAM usage differences were insignificant.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection failed to be established regression
introduced by the commit 350c569aba ("Bluetooth:
controller: Avoid offseting to lldata").
As the Rx-ed PDU buffer is re-used to construct the
connection complete message towards HCI, the fields in the
Rx-ed PDU need to be backup for future use in the control
path. Here the channel selection bit is backup now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connection Parameter Request Procedure implementation
to respond with sent interval_min and interval_max so that
certain peer devices dont reject the response as Invalid LL
Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the fix in the commit 685da02354 ("Bluetooth:
controller: Fix advertising random delay resolution calc")
to apply modulo in tick units before adding a tick.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calling bt_recv in the Bluetooth host Tx thread by the
controller implementation caused deadlock in combined host
controller builds when HCI LE Create Connection Cancel
generated the HCI LE Connection Complete or HCI LE Enhanced
Connection Complete events.
Controller's HCI implementation has been updated to place
the generated event into Rx FIFO to avoid the deadlock.
Relates to commit a59f544fb4 ("bluetooth: controller:
Handle non-priority events correctly")
Relates to #10314.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In commit d5836195d7 ("Bluetooth: controller: Increase advertising
random delay resolution"), the resolution of random_delay was
increased from 8-bit to 16-bit. Due to this switch the result
of HAL_TICKER_US_TO_TICKS() can now be a 0, which causes the following
crash:
***** Kernel OOPS! *****
Current thread ID = 0x200043f0
Faulting instruction address = 0x17914
Fatal fault in ISR! Spinning...
Let's make sure we don't pass a 0 to ticker_update() by increasing
the result of HAL_TICKER_US_TO_TICKS() by 1.
Signed-off-by: Michael Scott <mike@foundries.io>
Fix the default Tx buffers to 3. While the first Tx-ed
buffer generates the HCI Number of Completed Packets Event,
the controller needs to have 2 additional Tx buffers queued
so that the second Tx PDU has the More Data (MD) bit set so
as to have the connection event to continue to transmit any
additional Tx buffers that the Host will enqueue in the same
connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the resolution of advertising random delay from
1 ms unit to 1 us units. The controller scheduling will
floor it to nearest 32KHz clock unit on nRF5 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
In order to avoid the build system complications that come from
including a timestamp, remove it by default from the version string in
HCI Vendor Extensions. Users can still include a unique identifier, be
it timestamp or not, using the CONFIG_BT_CTLR_HCI_VS_BUILD_INFO Kconfig
option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Data Length Update implementation reused the flags used
by Encryption Procedure which caused invalid Encryption
Procedure sequence under conditions where Data Length Update
Procedure collide with Encryption Setup initiated by the
peer central device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There is an unnamed choice for the BT link layer selection.
Giving the choice a name would allow multiple declarations of the
option and the ability to select out-of-tree LL's.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This allows to provide public address for controller without using
VS HCI command from host. Useful for controller only builds or
combined builds that are not using VS HCI commands.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
When running combined build on nRF5 with disabled VS command it is
possible to simply read static random address from FICR in host.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In the BLE controller, NRF radio HAL, for the PPI registers used
for the SW TIFS.
To allow easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Replase magic numbers with HCI Error Code definitions in the
LE controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation of Connection Update Procedure to
not assert when peer master violates the Bluetooth
Specification v5.0 Vol.6 Part B Section 5.3 Procedure
Collisions. Instead disconnect the link with reason
Different Transaction Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Relates to commit 8b3fd6963c ("Bluetooth: controller: Fix
assert on different transaction collision")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation of PHY update procedure to not
assert when peer master violates the Bluetooth Specification
v5.0 Vol.6 Part B Section 5.3 Procedure Collisions. Instead
disconnect the link with reason Different Transaction
Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After a dedicated header is allocated to the simulated SOC versions
there is no need anymore to have guards in these other files
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To avoid issues with differences between the simulated and the real
SOC let's separate the simulated one into its own header
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added implementation to check and wait for stable 32KHz
clock source before starting connectable/directed
advertising state and initiating state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the implementation to generate command status as per
Bluetooth v5.0 specification instead of the incorrect
command complete that was generated before.
Also, the unsupported features status will be generated
before the invalid parameters status.
Relates to commit 258c7ccff1 ("Bluetooth: controller: Fix
HCI LE Set PHY invalid behavior check")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Symbols without prompt cannot be configured from application
configuration file.
warning: BT_CTLR_LE_ENC (defined at subsys/bluetooth/controller/
Kconfig:198) was assigned the value 'n' but got the value 'y'.
This symbol has no prompt, meaning assignments in configuration files
have no effect on it. It can only be set indirectly, via Kconfig
defaults (e.g. in a Kconfig.defconfig file) or through being 'select'ed
or 'imply'd (note: try to avoid Kconfig 'select's except for trivial
promptless "helper" symbols without dependencies, as it ignores
dependencies and forces symbols on).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixes issues caused in GPIO driver due to overlapping GPIOTE
channel use in nRF5 software PWM driver and in Bluetooth
controller for implementing PA/LNA feature.
The issue is solved by assigning the base and available
channel count for GPIOTE considering whether PWM and/or
PA/LNA feature is selected in the Kconfig.
Fixes#8815.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
An empty packet on 2M phy is one more byte compared to 1M phy because
of the preamble.
The empty packet is then 11 bytes, which takes 44 us to transmit.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit removes the inclusion of kernel_includes.h from
the nRF51 and nRF52 soc.h headers. This prevents from an
inclusion cycle formation on soc.h. In the wake of
kernel_includes.h removal, necessary header files have been
added in several source files to be able to compile Zephyr for
nRF5x SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Split meaning of BT_CTLR and BT_LL_SW, since they always are the same.
This way BT_CTLR means that there an controller implemented,
and BT_LL_SW refers to the specific implementation.
This allows alternative controller implementations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds Bluetooth controller support
for it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Provide flexibility in choosing to use the host defined crypto
functions or the ones provided by the controller
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In the BLE controller, radio HAL, for the PPI registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller, radio HAL (TIMER registers):
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller radio HAL, for the CCM registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
(CCM part)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the Radio HAL, for the RADIO and RTC registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller radio HAL:
To avoid confusion, use SOC series macro instead of board macro.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller ECB HAL:
To avoid confusion, use SOC series macro instead of board macro.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE HAL for the ECB:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the ble hal for the RTC:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove include guards in internal files; it is an agreed
convention to not have include guards in internal header
files in Bluetooth subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Bluetooth Specification v5.0, Direct Test
Mode shall use maximum Tx power.
Fixed by adding nRF5x Radio HAL interfaces to get supported
maximum Tx power for SoC selected, and DTM testing sets the
Radio peripheral to use maximum Tx power.
Fixes#7243
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In certain cases the response to a command can come in the form of a
non-priority event. This is the case of LE Create Connection Cancel,
which generates a Command Complete and then an LE (Enh) Connection
Complete. Take this case (and other future ones) into account by calling
the correct Host recv function.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove non-existent Kconfig symbol references. An additional (but
related) change is the removal of all persistent storage symbols from
the Arduino 101 Bluetooth shell app, since BT_STORAGE no longer
exists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce hal/ticker.h to abstract out SoC specific
implementations and move any conditional compilations to
include header files here.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Selecting a choice symbol is always a no-op, and the latest version of
Kconfiglib prints a warning. This commit removes all selects of choice
symbols, which might make the Kconfig files a bit clearer and gets rid
of the warnings.
This is just a dumb removal. I did not try to guess the intent of each
select.
Fixes#6849
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Fix missing device filter clearing for cases where whitelist
was used and then in subsequent adv/scan enable it was
unused.
This fixes an assert in ll_filter.c at line 248.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleaned up the use of conditional statements to use the max macro.
Fixes#6230.
Signed-off-by: David Maitland <hello@davidmaitland.me>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
After porting the rand driver to drivers/entropy, replace the usage of
the old, Buetooth-specific driver with the generic entropy one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When using the LE Create Connection Cancel command, the controller is
supposed to return a Command Complete first and then an LE Connection
Complete Event after. Since the Link Layer does not generate an event in
this case emulate the behavior in the HCI layer instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Linux Foundation has been assigned a Company Identifier, and with it
a means of identifying Zephyr over the air. Default to the LF Company
Identifier, which can be overridden by silicon vendors.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixed the controller implementation for the missing advDelay
for connectable directed advertising events used in a low
duty cycle mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to address anomalies 102, 106 and 107 in nRF52, add a generic
hal_radio_reset() that does additional processing when required by a
particular IC or IC family. Implement the fix for the nRF52.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use RADIO_TIES_US to define minimum inter event space
between concurrent master and slave roles below which it
will be detected as a probable drift towards each other
leading to them overlapping on each other.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added missing HCI Supported Commands bit fields for PHY
Update feature. Also, refactored with missing conditional
compilation for other bit fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert incorrect calculation introduced in
commit ec5a787da2 ("Bluetooth: controller: Fix multiple
master role event scheduling") and revert a related
incorrect fix in commit a02606cbf9 ("Bluetooth:
controller: Fix missing ticks to us conversion").
Fixes the controller assert in ctrl.c line number 1477. A
64-bit arithmetic took ~35 us in Radio ISR for nRF51 causing
the ISR to take too much time before packet buffer could be
set.
Also, fixed master scheduling by correctly accounting for
the jitter between each master event.
Relates to: #5486
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect calculation of unreserved timespace which
should take into account the ticks_slot of current event,
and compensation for any reduced prepare in the current
event as well as in the next event.
This regression relates to the commit ad7c9d3d76
("Bluetooth: controller: Improved continuous scanning")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Define a macro HAL_TIMER_SIGN_BIT to correspond to the most
significant bit support by counter hardware used by ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use XON_BITMASK define instead of raw BIT(31) or bit shift
operations in code to represent use of reduced prepared by
an event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ticker execution context dependency out into HAL
folder. This decouples ticker from mayfly, enabling porting
towards a more tasklet (if and when kernel gets the support)
style execution contexts type implementation support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix, add the missing code for the removal of any accumulated
soft latencies or negative drift ticks when scheduling next
interval expiry with added laziness.
Typically a first interval would accumulate soft latencies
and this has to be removed if the interval is rescheduled
with any added laziness (scheduled to the next soft real
time interval).
Example, scan windows block any new scheduling until the end
of the window, adding latencies to any soft real time ticker
expiry which should try to execute as early as possible after
the scan window.
Fixes: #6083
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor BT_CTLR_ADV_INDICATION feature by moving the
implementation closer to the implementation that is closing
the advertisement event so that in the future new members
can be added as necessary (example, advertised channels).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect radio timing for Tx chain delay for S2 and S8
coding. Regression introduced in commit 55d3ce111c
("Bluetooth: controller: Refactoring nRF5 radio driver").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation in nRF5 radio interface so that
when Coded PHY feature is not selected then it does not use
the PPIs required for supporting the feature.
This will allow pwm_nrf5_sw driver to use PPI channels 14 to
19 and support 3 PWM channels. Without the Coded PHY feature
disabled, only PPI 14, 15, 18 and 19 are available for PWM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a missing ticks unit to microsecond unit conversion
potentially caused incorrect window offsets being used while
establishing connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ticker timespace reservation can range up to 10.24 seconds,
needing 19-bits to represent in 32KHz clock units. Hence,
fix controller implementation to use u32_t to store ticks
slot values.
Without this fix, the controller is asserting in scan_adv
sample when using continuous scanning with 2 second interval
and window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the high frequency clock preparation advanced
feature to improve radio utilization during continuous
scanning.
The inter-event timespace value now considers the reserved
timespace while determining if the high frequency clock
will be retained. This reduces the preparation time, hence
increased radio use inside scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the invalid control PDU handling so as to reuse the
switch-case and hence, reduce code size and CPU time used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In preparation towards a refactored controller, rename the
old radio_*_is_enabled() function to ll_*_is_enabled().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle Control PDUs
with invalid lengths by responding with Unknown Response
PDU.
Fixes LL.TS.5.0.2 conformance tests:
LL/PAC/SLA/BI-01-C [Control PDUs with Invalid Length from
Master]
LL/PAC/MAS/BI-01-C [Control PDUs with Invalid Length from
Slave]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup the use of long radio_pdu_node_rx and
radio_pdu_node_tx variable to shorter node_rx and node_tx
names.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the pdu_data_llctrl_phy_req_rsp struct into
pdu_data_llctrl_phy_req and pdu_data_llctrl_phy_req structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the pdu_data_llctrl_length_req_rsp struct into
pdu_data_llctrl_length_req and pdu_data_llctrl_length_req
structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements a minor refactoring of the implementation
for enabling the Radio on TIFS expiration. It inlines a function
that is defined in the local radio_nrf5_ppi header file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the sw-switch for
tIFS in nRF5 Radio using the EVENT_TIMER instead of a dedicated
TIMER instance. A Kconfig configuration is added so the user can
select whether to use the EVENT_TIMER for the tIFS switch or use
a dedicated TIMER instance.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements minor refactoring of radio.c and ctrl.c,
to prepare for adding the implementation of sw-switch based on
the event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the option of conditionally reuse an existing
CC register of the event timer for timer sampling used in ISR
profiling, in case SW tIFS switching is implemented based on the
event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds a symbolic name for the event timer
CC offset that is used to sample the event timer during
ISR profiling.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor radio_nrf5* header files to group together
definitions and have less #if-#else-#endif.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix HCI LE Set PHY command for invalid behavior testing for
invalid parameters and unsupported features.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix generation of redundant length update event when no
change in effective octets or time.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-73-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-74-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-76-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/MAS/BV-77-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-77-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-78-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-80-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-81-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed implementation to use Connection Parameter Request
Procedure Preferred Periodicity value in calculating the new
connection interval used by the master role in Connection
Update Indication.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-32-C [Accepting Connection Parameter Request –
Preferred_Periodicity]
LL/CON/MAS/BV-33-C [Accepting Connection Parameter Request –
Preferred_Periodicity and preferred anchor points]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix controller implementation to restrict HCI LE Set Random
Address command when advertising and/or active scanning
and/or initiator state is enable.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to support Connection Parameter Request
Procedure initiation with and without use of Feature
Exchange Procedure being performed in a connection.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-81-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/MAS/BV-82-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
LL/CON/SLA/BV-85-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/SLA/BV-86-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix controller implementation to only restrict HCI LE Set
Random Address command when advertising and/or active
scanning is enable.
Continues to pass the following LL.TS.5.0.2 conformance
test:
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed implementation to disallow setting Bluetooth device
address under active advertising or scanning states.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditionally compiled changes to the NRF52 HAL so it can
run on simulated HW on the native port.
(HW models are not included in this commit)
All changes are under ifdefs and therefore will not have any
effect on normal builds
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Refactor mayfly based execution context solution out into
the HAL folder. This opens up the possibility to use
tasklets (if and when kernel gets the support) style
execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes a bug where in Connection Parameter Request was
initiated by slave role while Encryption Setup had been
started by the peer master.
Fixes: #5823
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename some legacy upstream and downstream interfaces in
radio_* namespace to ll_* namespace for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor Kconfig and CMakelists.txt to be able to
conditionally compile in BT_LL_SW variant in the controller
subsystem. This is done to support future controller with
vendor specific variant implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant code that clears NRF_RADIO->EVENT_*
registers that are only used in PPI context. Only EVENT_*
registers that are read back need to be cleared.
Relates to: #5753
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the SW-based radio switch for TIFS for LE
Coded PHY S2 in nRF52840 with a single PPI channel and a single
TIMER CC register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the radio enable on-tick functionality in
function hal_radio_enable_on_tick_ppi_config_and_enable() in
radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Help text for BT_CTLR_DEBUG_PINS incorrectly mentioned
specific GPIO pins being reserved for this feature, but in
reality the pins reserved vary on the SoC selected, hence
any specific mention of pin details is removed from help
text.
Fixes: #5499
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a missing !CONFIG_BT_CTLR_TIFS_HW conditional
compilation when nRF52840 is configured to use hardware
Trx switching, that caused compile error.
Fixes: #5779Fixes: #5761
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit refactors the nRF5 radio driver of Bluetooth controller
to use symbolic names for PPIs. It also revisits the Radio hardware
timing constants to align with experimental measurements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add implementation to consider differing Rx chain delays for
S2 and S8 Coded PHY PDU reception. These changes are
required to meet tIFS timings for transmission after a
reception on S8 coding.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes many instances of errors similar to below:
zephyr/subsys/bluetooth/controller/ll_sw/ctrl.c:5927:22:
error: declaration of ‘s_link’ shadows a previous
local [-Werror=shadow]
static memq_link_t s_link;
^~~~~~
zephyr/subsys/bluetooth/controller/ll_sw/ctrl.c:5905:21:
note: shadowed declaration is here
static memq_link_t s_link;
^~~~~~
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the controller is connecting to multiple connectable
advertisers, the events are scheduled consecutively avoiding
overlapping events. Calculation of the window offset did not
consider the preparation time before the event, causing the
new master role connection event to overlap with previous
event. This is now fixed by including the preparation time
in the used window offset from the end of connect_ind PDU
transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the check related to initiating connection parameter
request procedure. This will avoid sending invalid repeated
dispatch of connection parameter request PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When connection parameter request procedure was responded
by master role with Unsupported Link Layer Parameter Value,
a missing reset of the connection parameter request
procedure state caused next connection parameter request to
be incorrectly responded with same procedure collision
extended reject ind PDU. This caused an eventual connection
disconnection with reason LMP response timeout. This is now
fixed by reseting the state correctly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes the following compile error when CONFIG_BT_CTLR_LE_ENC
is disabled:
subsys/bluetooth/controller/ll_sw/ctrl.c: In function
'isr_rx_conn_pkt_ctrl':
subsys/bluetooth/controller/ll_sw/ctrl.c:2613:29: error:
'LLCP_ENCRYPTION' undeclared (first use in this function)
(conn->llcp_type != LLCP_ENCRYPTION)) ||
^~~~~~~~~~~~~~~
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PA/LNA feature being not default enabled, keeping the PPI
indices used for this feature at the higher indices would
allow use of these PPI indices by other drivers, for
instance the nRF5 software PWM driver.
Software PWM driver provides 3 PWM pins/channels using upto
6 PPI channels. If BLE controler where to use 0-13, then
14-19 PPI indices can be used by the PWM driver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace use if void * declaration related to memq links with
more readable memq_link_t.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimised the parameter passing order of memq interface such
that the compiled code uses less space and execution time.
Having a parameter that gets returned as the first parameter
passed to a function avoids instructions required to have
the result in the return register.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When testing memq implementation used by controller, a
missing check on NULL pointer return could lead to NULL
pointer deferencing.
Current implementation of controller and mayfly do not
by design lead to NULL pointer dereferencing, this fix
is only for correct-ness and complete-ness.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Fixes the following conformance test regression failure
introduced in commit 7dd5fbee26 ("Bluetooth: controller:
Fix MIC error due to parallel Enc Proc")
TP/CON/MAS/BV-28-C [Initiating Connection Parameter Request
different procedure collision encryption]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to disallow initiating LE Start Encryption while another
procedure is in progress. Similarly, disallow initiating
another procedure while Encryption procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller Kconfig to enable use of fast radio ramp
up by default, hence enabling support for Asym PHY updates
by default on nRF52 Series SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace all controller asserts in control procedure responses
that checked for buffer availability with an implementation
that nacks request PDUs if there are no buffer to prepare
response PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The main purpose of recv_thread is to process incoming events from the
radio and also any buffered items waiting to be dispatched to the Host
and that are pending because of lack of Host buffers.
When an iteration of the recv_thread obtains a element from the radio it
needs to process it immediately, either sending it straight away to the
Host or appending it to the queue. This was not the case before this
patch, where the concurrency of a buffered packet with one coming from
the radio would cause the latter to be "dropped", causing missing
packets.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When a connection is disconnected with outstanding unacked packets, the
Host has no way to signal or acknowledge their processing to the
Controller, since it is illegal to send a Host Number of Completed
Packets command when the connection is not up. Instead, consider the
outstanding packets as acked in order not to affect the correct flow
control.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add implementation to support Coded PHY update procedure
with packet transmit time restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use S8 coding Rx chain delay timings to calculate the PA
pin assertions when in Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Always use S8 Rx Chain Delay instead of the actual Rx-ed
packet coding. I believe, as the packet always start with
S8, hence S8 timings when used the tIFS is near correct
value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating and setting up the header compelte timeout
use S8 coding Rx chain delay.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the commit dd52b8ea02 ("Bluetooth: controller: Fix
first connection interval timing"), instead of using just a
tick unit as workaround, microseconds corresponding to a
tick unit was used while calculating the window offset to be
used at the connection update instant. This introduced an
error in scheduling the first event with new connection
parameters, causing supervision timeout of connection update
procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a missing reset of FC feature on HCI reset. This
feature provided a simple connection handle based event
exclusions, but this is no longer needed with the
support for controller to host flow control. This feature
should be removed in the future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When a peer master performed a PHY update procedure with no
change, the state machine was not released. This blocked
any future local initiation of the procedure and also
leading to termination of connection with reason LMP
response timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the usage of NRF_AAR peripheral for controller privacy
to clear events on configure and on every radio ISR entry.
Without this fix, there was spurious AAR matches leading to
controller asserts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PHY Update procedure timeout was started without transition
to the state that waits for the procedure to complete. This
prevented the timeout from being reset on successful
completion of the procedure and eventually leading to a
connection termination with reason LMP Response Timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connection Parameter Request Procedure's Connection
Update Procedure initiation to calculate the offset rather
than selecting offsets from an out-of-bound memory area.
The symptoms of the bug was noticed as a supervision timeout
due to use of incorrect offset communicated to peer and a
wrong offset used in scheduling the connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the peer slave rejects a Connection Parameter Request
Procedure, the controller proceeds to perform a Connection
Update Procedure without clearing the procedure timer that
causes the connection to terminate eventually. This is
fixed by clearing the procedure timeout when the Connection
Update Procedure completes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If a peer master role has support for Connection Parameter
Request Procedure set in its supported features but would
send an Extended Reject Ind as response to the procedure
then the controller incorrectly initiated a Connection
Update Procedure which is not permitted in a slave role.
This would lead to connection timeout after the used instant
in the invalid Connection Update Procedure.
This is fixed by initiating a Connection Update Procedure
only if in a master role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the Zephyr HCI VS extensions apply to both the Host (using them
for additional functionality) and the Controller (implement the commands
and events), it make sense to make this a common setting in order for it
to be configurable in a way that applies to both.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The PA/LNA feature is not functional on nRF51x series due to added
interrupt latency. Disable this feature unconditionally for those ICs to
avoid unexpected behavior.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Issuing HCI reset command while having connections sometimes
hung the controller.
ll_reset supplied invalid stop ticker id to role_disable
when trying to stop all connections. Connection role does
not utilize stop ticker. The invalid ticker id supplied
referenced memory outside the pool of tickers and based on
what the content is in RAM there, the controller would hang
trying to stop connections.
Fixed by not calling the ticker_stop interface with invalid
ticker ids.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the Read Build Information VS command. This returns a UTF-8
encoded string, which is extendable by the user via a new Kconfig
option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Zephyr VS command that allows a Host to write a public
Bluetooth Address to the Controller in order to allow Hosts to provide
their own public Bluetooth addresses.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the use of tIFS software switching PPI index set up by
one position to make place for use of PA/LNA implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Earlier design captured AA twice in the first Rx in a slave
connection event and retained one of the capture until end
of event to calculate drift.
Design updated to use single capture of AA and save the
first AA capture in a slave connection event in RAM instead.
This frees up a PPI channel in the controller design.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Document internal the purposes of various Tx/Rx PDU end
capture setup.
Also, removed any redundant capture of packet end.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of radio_tmr_start to reduced duplicate
assignments common in if-then-else control path.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated debug pin mapping so that the outputs are on P3 pin
head on all nRF5x Development Kits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the configuration of NRF_CCM for 2M PHY connections.
Now faster 2M data rate mode will be used when a connection
is in 2M PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use correct NRF_AAR enable macro defines from Nordic MDK.
Old code funtionally worked fine even though not setting
the correct enable value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug in the implementation of Connection Parameter
Request Procedure when initiated in master role caused the
connection to terminate with reason LL response timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The status in the Command Complete event was uninitialized, leading to
incorrect contents of the event parsed by the Host. Correctly initialize
the status to success.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
During testing it was discovered that directed advertising
timeout is missing implementation to handle the timeout
happening while next event is already in preparation.
The consequence was that after the event ticker expired,
the counter is shutdown, stalling the setup PPI from
starting the erroneous advertising, leaving the controller
in an invalid hung state.
This has been fixed by correctly handling the cases, stop
between prepare and event, and stop inside radio advertising
event. The fix takes care of putting the radio active
callback and HF clock in the correct states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>