Rename the project configuration files to pass the build.
The Makefile specifies the following format for the conf file:
prj_BOARD_PROF.conf. However, there are two files with the
following format: prj_BOARD_IFACE_PROF.conf. So, rename them
to avoid build errors.
Change-Id: I75e0d4169db881583b5f9a2b67deee46f66b6c97
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove commented line in the zperf/Makefile file.
Change-Id: Id869f21e923d3bb39fc31c5216ce29d78a0e1805
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the reference to CONFIG_NET_UIP in src/Makefile.
Change-Id: I960413c17496c4b70b9c171a54ccfca4951b858b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Update these scripts to explicitly call out python version 2. Some
distributions have started making /usr/bin/python version 3, and other
distros have expressed a desire to do the same.
Also use the
#!/usr/bin/env python2
construct instead of an explicit path so that the user can more easily
use their own python install by just placing it earlier in the path
Jira: ZEP-1548
Change-Id: I36dccc652353ba8bd58c483dba3ce61d3643de00
Signed-off-by: David Brown <david.brown@linaro.org>
Sample projects that pair the frdm_k64f board with a cc2520 require
additional pinmux settings beyond the standard frdm_k64f pinmux. These
settings used the private k64 pinmux API rather than the public pinmux
API.
Because the mcux pinmux driver now always supports the public pinmux API
(vs. the k64 pinmux driver which only supported it in pinmux dev mode),
we can convert the frdm_k64f_cc2520 projects to use the public pinmux
API and the mcux pinmux driver.
Change-Id: Idfae8393171b007d8629e34bfae64255f55c6792
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes unnecessary CONFIG_ETH_KSDK project settings from the net
samples. Some of the configs no longer exist (MAC0-2), some are not
valid (MAC3-5) due to RANDOM_MAC=y, and the rest are already enabled by
default by the SoC and board.
Change-Id: I27079b8bb142ebc507885f3b1de07e282c813506
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These samples/tests fail to build on some of the nRF5x platforms. We
don't need Bluetooth enabled for these tests so we can reduce footprint
by turning it off.
Change-Id: I87e62a1d70f80d2bc22414d6a9e591e36ad9fa06
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add global option for legacy configurations and enable by default for
backward compatibility. Disable option on tests and keep it on legacy
samples and tests.
Jira: ZEP-964
Change-Id: I0831e2aa74d438b1ac74eb762186cb220a504beb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various sensor samples are hardwired to expect returned sensor values
are represented as doubles. In each case this assumption is incorrect.
Introduce a generic sensor_value to double helper function and adjust
the samples to use it.
Change-Id: I89c788686576562b84e07a36064640231340c33b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This will allow inclusion of documentation files that exist outside of
doc/ and will make it possible to add rst files across the tree,
especially for boards, samples and tests.
Change-Id: I7afcf92d99f504b2bc0b2b7e3452acb2f8e08294
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cut wait times by 4, in chunks in 25ms instead of 100ms. This allows to
see what is going on, but with much faster transitions, which makes the
demo slightly less boring.
Change-Id: I32fdd6e41a9af1fe9aa8a8f186de7945986b3a71
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is easier to test the 15.4 layer instead of hard-coding sample
logic.
Change-Id: I2376dec3dad9e2ceca3f61bd88bf5709f1bc1390
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's currently hard to find a Beacon enabled network. So let's switch to
active scan for now.
Change-Id: I192e7c3128f9488fb680ea7f23221b2b4aa52188
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will print-out the results, if any.
Change-Id: If988a6dc3c4504a8d4aa947d3d3f949870b638c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes two references to yaip that were were left behind after net/yaip
was renamed to subsys/net/ip. The zperf sample needs net_private.h, so
the include path is updated. The dhcpv4_client sample doesn't need it,
so the path is removed.
Change-Id: I189f1b58191524330254a5b7b31a9a4974956728
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SW0_GPIO_INT_CONF shall allow boards to define the
interrupt configuration for SW0 without having to modify
the button sample app.
If SW0_GPIO_INT_CONF is defined set EDGE to it, otherwise
used default EDGE value.
Change-Id: Ia697e06debc341463ed9cdee1db564f3727d27e3
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Displays the present value of the indicators in the Handsfree
application.
Change-Id: I666ff2b15e70de8c1a26b902077d79c5c1a9d5fe
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This port ipsp sample to use the native stack so it can be used once
again.
Change-Id: I7975b017b0aa5bd81a1701692ec81527e39d4701
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI ECC commands are causing freezes in the controller build. Until
further investigation is done disable them to avoid issues when running
the controller standalone.
Change-id: Ifab0fa362348b72e88adaa5250c914770e4a70ba
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Re-instate the init_app()call which was accidentally removed by commit
commit 34f9391c9cf5 ("dhcpv4: Report address acquisition.")
Change-Id: Ic5ef70fd855a5bcb3ea1171de652994db493f4bb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
printk can do the job properly.
Change-Id: Ib743328e046bdb29be26adfe5cd007aaa758cd64
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When building the echo_client sample app, the following warning
is found:
echo-client.c:37:
echo_client/src/echo-client.c: In function 'send_ipv4_data':
include/logging/sys_log.h:108:20: warning: format '%d' expects argument
of type 'int', but argument 7 has
type 'size_t' ...
So, this patch changes %d by %zu to remove that warning.
Change-Id: I8a3822bca6d5988e531684d647de93bd77aabf9b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
When using SLIP for TAP networking between guest and host, the correct
option is CONFIG_NET_SLIP_TAP. CONFIG_SLIP_TAP only enables it on the
SLIP side, it should be enabled on the networking stack, as well.
Change-Id: Ie1dacd07eb5a0891a572b08268a865f05a373690
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When using SLIP for TAP networking between guest and host, the correct
option is CONFIG_NET_SLIP_TAP. CONFIG_SLIP_TAP only enables it on the
SLIP side, it should be enabled on the networking stack, as well.
Change-Id: I76226db9c587f1b5e9613244adab8f916ad94013
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Use the network management interface to catch and report IPv4 address
acquisition in the application.
Change-Id: Idd1bcaac90fffbd617600a7713206599e547826f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Add build test to sanity_check to get a complex net app being built
for frdm-k64f.
Change-Id: Ib136f7964b65ad2167a3ed4484bff3bfe2a7ebad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The README.txt file is updated with information about wiring
and building. A testcase.ini file is also added by this patch.
Change-Id: I7354d844ac3dec41f0c9af02ede5da26f3ad0398
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The dev name for spi in the sensor sub-system was changed to
SPI_SS_x from SPI_x recently. Let's use the new name in the
sample app.
Change-Id: I78cdf21fce16290503c303e0de1432b4587486aa
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The addresses used by the client were still made reference to the types
used by the old network stack.
Change-Id: Iaba919cb072e3295c9b371cc8fe493284c5b523b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The legacy IP stack was removed from the source tree, so this changes
were made to adapt to the native IP stack, but this might not work on
the galileo platform due the ethernet driver not being tested on the
new stack on TCP, but to have the reference application ready when
it gets integrated
Jira: ZEP-1448
Change-Id: Ifa6ea0afb3bc532dfb92b09debbf6eee59e38a25
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The shell_cmd structure has three parameters and only two were
initialized. So, this commit initializes the remaining parameter
and also adds the ARG_UNUSED macro to avoid compiler warnings.
Change-Id: I667a4e9839ec5acd526df0bb465beb2062518315
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add ARG_UNUSED to some function parameters to avoid
compiler warnings.
Change-Id: I5db5bc536f1eeb084e08d2fbe4a8b0a8456e67a5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If we have Bluetooth or GPIO SCH we need multithreading right now
so disable any platforms that enable these features from running
this test.
Change-Id: I1ea35636e1382aac0f266fe73441619f9ac00d53
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove CONFIG_BMI160_TRIGGER_SOURCE_GPIO from prj config
file. It is not being used any more.
Also change CONFIG_STDOUT_CONSOLE to CONFIG_PRINTK. The
whole sample is using printk instead of printf.
Change-Id: I4ac7db37da1e45aed2457ace9e82385e37143c36
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Removing useless options, refining the logging and of course setting the
right IP to make it work.
Change-Id: I0c0c1979d590bc4c4fcb3a1d1a252b87b0153511
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When zephyr receives a 15.4 frames it allocates 1 RX buf (nbuf) and 1
DATA (buf), and it gets queued on net stack for post processing.
Problem: receiving a lot of frames is just completely nominal and very
fast (timing is critical in radio, and the rx thread of the radio driver
has a high priority, much higher than net stack's rx post processing).
So guess what happens when CONFIG_NET_NBUF_RX_COUNT=10 though let's say
12 packets are coming in?
The RX buffer pools gets empty and soon the system hangs on getting a
newly allocated one.
This proper CONFIG_NET_NBUF_RX_COUNT tweak fixes the issue, however some
future work will reduce the need of so many RX meta buf:
- l2's recv could be called right away at net_recv_data, before queuing
the buffer for post-processing, but this could affects reception
timing on radio side, which is critical.
- An l2 pre-processing (in the middle of what current l2 recv does)
could be implemented, it would be technology depenedent (aka: not
mandatory on all l2) and could quickly decide what to do and at best
drop the whole, or at least drop the RX meta buf (frag would still be
kept). Let's see.
Jira: ZEP-1427
Change-Id: Ic75b02efa36e35b450c02b3e6439a8d73f03f839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch adds the project file for the FRDM K64F board, it also
updates the README_IPv4 file to include instructions for using the
DNS resolver with the FRDM board.
Change-Id: Ic9b92c2fed2636b56044309dc3be7c829d828d35
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
enc28j60 can work up to 25Mhz, let's set a divider of 2 on the 32Mhz
host clock then. This require to mimic CS with a gpio in the SPI driver.
Change-Id: I98f84fa793a614cdbb566be39a262ff825101255
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help testing dhcpv4 through frdm k64f ethernet port.
Change-Id: I7cf47d77b79041fe7ab408355d1a9f9332fc1f54
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This helps to test enc28j60 along with dhcpv4
Change-Id: I884f0aba0a04c3cc0d015d327cb9c100759d45ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes left over CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: Ida3a2c2dba6e44f112711170f883c0582c3ee7ed
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes echo_client and echo_server samples.
Fixes compile error:
...
src/built-in.o: In function `fdrm_k64f_cc2520_pinmux_setup':
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
...
Change-Id: I590f88f6bd083a30deea77fa860f001a3a55b278
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit adds the DNS client section to the samples/net/README file.
Added text includes a quick description of the application and
references to documentation already available in the tree.
Change-Id: Ia7ef3aea19069df5be2d8f14344b1afa750b22bd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the ARG_UNUSED macro for the status variable in
the udp_received callback.
Change-Id: I8c592cab72ccf5ba314742ef705e96d4a4d067e9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit validates the size of the buffer used to store the
incomming datagram in the udp_rx routine.
Furthermore, two expressions related to the rx net_buf are now
executed before returning on error, avoiding a possible memory leak.
Change-Id: I30dc0a2d57dc207590387f1a9ab79945a1157ef5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The DTLS client will use and asynchronous signaling method to
receive, this makes the sample work on QEMU
Jira: ZEP-1233
Change-Id: I28f074c4736f84c10e6be8119a5ba50b138fcc0d
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Previously, the domain names used in this application were
not very useful to proof that the DNS client was able to handle
multiple IP addresses.
In this patch, the number of domain names is increased. Some of them
may return multiple IP addresses as shown in the README_IPv4 file.
However, results may vary depending on the network setup.
Change-Id: Ic713ce48b4afa592c1480311f4394de6e57bf3fb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch introduces a k_sem that will block until:
- data is received, or
- the user-provided timeout expires
This change allows us to simplify our previous DNS client
implementation.
This change is related to ZEP-1357 because we are refactoring the
DNS client API removing the continuous update of the net_context_recv
routine that seems to be causing issues after the kernel's update.
Jira: ZEP-1357
Change-Id: If01c9274ac8f096f0095a2872f86be2e007212ee
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit introduces the dns_context structure.
This new structure will reduce stack overhead due to
the simplication of the dns_resolve routine signature.
Furthermore, the timeout parameter is now int32_t
instead of uint32_t.
The dns sample application is also updated.
Change-Id: I5d789656bacbd23c4654edce5d116a88dc42c354
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This enables Bluetooth L2 driver with CONFIG_NET_L2_BLUETOOTH and
removes CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: I6a75c105e45a1b748abf6a70234d415c5121bcdc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables Bluetooth L2 driver with CONFIG_NET_L2_BLUETOOTH and
removes CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: I6f8b0e756f6e066b4b9cf9dec22f52fd72155c98
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Common code found in samples/net/common
App is built with:
make BOARD=frdm_k64f CONF_FILE=prj_frdm_k64f_cc2520.conf
Note: debug messages are enabled on many parts of the system, and these
are killing the timings. So it's not unusual at all to see rx errors on
cc2520 side. Without most of the debug, much less error will occur (if
any when dbg is fully disabled).
Change-Id: Ib6f0868c300652270661e72e80108804308164ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for resuming from deep sleep on the ARC.
Change-Id: Ic1e17e318a1121ac3c5ac2b6fb86ba00c78fd872
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Directly use AON GPIO trigger instead of IPM.
In the past, SW did not allow arc to receive AON GPIO interrupt.
So, interrupt from BMI160 was routed to x86 cpu. Then, x86 cpu
passed the event to arc through IPM. But, SW was updated and arc
is able to directly receive interrupt from AON GPIO now. So, IPM
is not needed any more. Both IPM and GPIO triggering code is there.
We just need to change the configuration by modifying the prj
config file.
The x86 code will be removed since it will not be used any more.
Change-Id: Ibc4250a34218cc52bf4c726cf70617cfdea3b2e8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ applications.
Change-Id: I767a04635b38d8ef7a02e8c7da3a5c99b0bc7709
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The format string passed to printk is trusted, and this is just sample
code anyway.
Change-Id: I267e1e3a9b6720c4216624bf0c2590ce42c6c681
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 7a74fb0454.
This commit breaks the sample. The sample code has a bug which will be
addressed in a separate patch.
Change-Id: Ic44faeafced4415765fded04e2493e306fc35331
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove CONFIG_TEST_RANDOM_GENERATOR from each test and sample where it
is not required.
Change-Id: I949f8e93c2cb1881622a5e48efeb87c43122a170
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove SENSOR_VALUE_TYPE_INT as it is the same as
SENSOR_VALUE_TYPE_INT_PLUS_MICRO with val2 set to 0.
Change-Id: If5a9c579b7267701c27f40fd887acae47d64edc5
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove SENSOR_VALUE_TYPE_Q16_16 as it is not used by any driver. Future
drivers can use any of the remaining value types.
Change-Id: I984143cc65d6a6fd0477f310ac17c62498cc05b8
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disable MDEF option and set it only in legacy projects.
Change-Id: I2e1f011eb1f876af929140e36f71f0efb5e955c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct some syntax error and update some comments. There is
no functionality change.
Change-Id: I86c922c8aabcc4464b86f33ad7edf6056b1d765c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The gpio device driver name for the sensor sub-system was
renamed to GPIO_SS_x from GPIO_x recently. Let's use the
new gpio driver name for the sensor sub-system in the app.
Change-Id: Ie06b072d31e23e74c3ac41a4590845b24a020ed1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The random driver, if enabled, is initialized by the kernel
initialization function. There is no need for applications or tests
to re-initialize the driver.
Change-Id: Ib4712dda937a7a83a8079c8aa662cec03c5416f8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The sample was reading the sample values regardless of return
value of the fetch sample function, now it exits the function and
prints an error message
Coverity-CID: 157576
Change-Id: If9a909ed9b617357a032c5632ac04984846d6744
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Remove two configuration parameters related to gpio used as spi
chip slect from prj config file. since they are already in
arduino 101 board config.
Change-Id: Iebaab605d8a6394e27c70ebbf4bac37a24665522
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample fails if the main stack size is 1024, so this patch
increases the value to 1280.
Change-Id: If5e21c09234e2ca8178e8dde684361844fababca
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds Beetle to the Watchdog test case.
Jira: ZEP-1300
Change-Id: I371ca2f89aaec8e07f45cfa04fc2618d009cf487
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Fixing a tiny build error found through sanitycheck.
Change-Id: Iee9a3ac135380ddf70e2902b532f6f28d417715c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a fxos8700 sample application that uses the sensor data ready
trigger to periodically print accelerometer and magnetometer data.
Change-Id: I43fef6cd6090b58d8d0168a25558a3a05781ea5d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This allows to fine tune TX stacks size depending on selected HCI
driver. If needed it can be used to tune for monitor too or other
logging mechanism used.
Change-Id: Ib501921da0b786e151083760d85ec58fe3c08b60
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use BT_STACK_NOINIT for tx stack declaration. This makes sure stack
it properly alligned and account for k_thread overhead.
Change-Id: I704958fcc3ce02aba913f6eaee13ae50d2a81591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_enable_raw() needs to be called before spawning the tx thread,
otherwise there might be an HCI command processed from the UART
before the HCI driver has been opened and therefore initialized.
Change-Id: I050158bd48bebaf8fa2cf6b11efb54b531f70079
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
From stack_analyze function, used isr stack is 368 bytes
with the controller build, main stack is 288 bytes and idle
stack is 56 bytes. Hence, configuring sizes of 512, 512,
and 256 bytes for isr, main and idle stacks respectively.
Increased max connections from 16 to 20 utilizing the RAM
free from the reduced stack sizes.
Change-id: I67d073fd1893cafc53d36e89035a6fd931488a46
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CC2520 is not embedded on an arduino_101, it is however possible to wire
one, and thus it requires to provide cc2520_configure_gpios() function.
This one, being common to a101 is found in samples/net/common.
Change-Id: I86f2734847edb3f6a968522afccc3099ed854d13
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit https://gerrit.zephyrproject.org/r/#/c/6971/ changed the
location of some include files, making compilation fail.
Change-Id: I43c124be28b55e550ef2204ca9faa7031665fb4a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This commit updates the dns client application to use the
new kernel API.
Change-Id: Ibf920532b02a1561bfb38f69e5dd994ab21574bc
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port the zperf network performance tool to native IP stack.
TCP support is missing from this version.
Change-Id: I2648e7d81014bb0cae8cf50854b0ae5f89a6567c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot send a network packet, do not quit as that is
really not necessary here.
Change-Id: I7613d46bdbc849b75aaf0fc71c58beba810fd658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the default board is qemu_x86, make sure there is similarly
named config file that can be used by default.
Change-Id: Ibc480d3b4eecc2601e3670c8da19be9c01833c36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use by default a board specific config files for both
echo-server and echo-client sample applications.
This makes more sense than using the network technology specific
config file that was used earlier.
Change-Id: I155fc138f4b0ed1166f4e25267513afc3fb6fd76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy stack artifacts from the echo-server and echo-client
config files.
Change-Id: Icc591b9540495c4ee181517369b0df9bb91972bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables application debugging using qemu target:
export QEMU_EXTRA_FLAGS="-s -S"
make qemu
Was tested with echo_server
Change-Id: I1906dea2fbc5afe03b11729d2edb8f3629a629f8
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the old MQTT and NATS publisher and subscriber
applications that were based on the uIP stack.
Change-Id: I7ba8e155e32ba0aa53c8dec1b6c0cc5170d70943
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
My IPv4 address was missing because of complex set of #ifdef's.
Change-Id: I6768587d3e104a57c10756bc43267f26068aa3cb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Nbuf data size needs to be set to 128 bytes, specifically for
wpan sample.
Debug output kills timing, and thus can generate spurious failures on
reception, so limiting it to errors by default.
Change-Id: Ia918361d07369dacbe577e26855d7ef6ed865f7b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The used IPv6 or IPv4 address can be set in the config file.
This way one does not need to edit the source file to setup
the desired IP address.
Change-Id: Ic900bd4694481b4b035026ad0ba7b9280eb84e4a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let the echo-server listen any configured IPv4 address
by default.
Change-Id: Ib83c5e069ae1e26615c37fa980bc4009b5a5e40c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4 support, then do not try
to set static IPv4 address.
Change-Id: Ia359f578044d72b951f53c509c92c09d575207f0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we want to receive packets to multiple addresses, the solution is to
listen on the ANY address, and add the address to the interface in
question (already done).
Change-Id: I383cc1401f1236ee05bdb010252a9f9909aa15bd
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Before using the LED we must set the direction of the GPIO pin to
output, and the LED will turn on when that GPIO pin is 'low'. So, for
our purposes, the LED is active low.
Change-Id: If8e6ce05ff2f3ddb7b17a87b172a91f7276194a4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
'board.h' includes the definition of LED0_GPIO_PORT and LED0_GPIO_PIN,
without this include the fallback was used, as if the board in question
didn't have any LEDs.
Change-Id: I78ebdb2e2ffc41dff5011dcf9e33e09d70950e81
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds a configuration profile allowing this example to run on a
Quark SE C1000 devboard.
Change-Id: Ic04fd30a91ed0a1fc8c3a3b3a6e397f0722f50b1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Nbuf data size needs to be set to 128 bytes, specifically for wpan
sample.
Debug output kills timing, and thus can generate spurious failures on
reception, so limiting it to errors by default.
Change-Id: Ia0b8c904e0bc66a7922af4f317db623db6c51462
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds the required code to echo server so that it works with TCP as
well.
Change-Id: Ib45dd91a52a60ddb4d8f0ae11175ceb52199c398
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Including shell allows to execute some kernel commands and make sure
system is not crashed.
Change-Id: I6157229614655dc7e523f1cf0f84ee7c58d7a717
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Due to huge delays with DEBUG log level change it to INFO.
Change-Id: I81caf78fc6e9e064c2ed8e18caa99351028af62a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case transmit is failed send ack to the driver with zero sequence
number which is not used for valid seqs.
Change-Id: I1047de9ab5de636c5a8983f31376046757c4dc0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following replacing semaphore with timeout semaphore transmit may not
be finished returning error after which communication stalls. Allowing
3 retransmits solves the issue.
Change-Id: Ibad05c2eac43dd6bb0ed72aaf16a7a2ef4185067
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the case when we receive large amount of
data and then copy it into new fragments. If the MTU is larger
than the fragment size, then it is possible that we might
overwrite net_buf memory and crash. This is typical in ethernet
network.
Change-Id: Ib1c65819c3bc718ec04f558e3df235246b5655dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DTLS client will not longer use the legacy IP stack.
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I7402a188fc7501873d98d3b6cb2f03ee51f3506b
This commit allows echo-server to listen all defined addresses
specified to its network interfaces.
Change-Id: I52874210f6987c75d7921e514399a9eda55911bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SLIP buffer size depends on maximum IEEE 802.15.4 frame size and start
byte.
Change-Id: I1cb0a848dce6b0c85bf11408733d777f7a3b03c9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove unneeded SET_HW_ADDR_FILT since it is handled by other
commands and add missing opcodes.
Change-Id: I4b6488e6cee742b79c16789e817795138506dc77
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's 127 by default as soon as 802.15.4 l2 is selected.
Change-Id: I6c29d88bb3277a15fe54693027caf320bc3d9fc4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This demo showcases how to expose resources that are exposed using the
link-format feature.
Change-Id: Iad9421082fae3212cae58e6d6e9b88fa170678b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Forcefully set the IPv6 address in echo-client so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: Id24f9aa84b30a3da941bb6b9e4522c7218687e12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Makefile modifications to be able to be compiled with the unified kernel
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I0fce5d3f6b28df0cff4b7c0b554a787996e8c966
Print packet hexdump and interrupt related debug only when
VERBOSE_DEBUG is enabled.
Change-Id: Ieb997e3537a9a2316d1435372948004dd93babab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update information related to simple web server info.
Change-Id: Ib0155c116a3d53b374a7401eb6e9d1599390dba3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print packet hexdump only when VERBOSE_DEBUG is enabled and remove
debug print in empty functions.
Change-Id: Ifd3ae59001233f0237c4b7575bd92607c93e2ea0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Forcefully set the IPv6 address in echo-server so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: I99041539c50f994f5d3ddaabaf5cac8599d82078
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS,
native IP stack and the enc28j60 SPI Ethernet Driver
Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
It is the responsibility of the callback to release the buffer.
Change-Id: Id80f5f9ca190868a7c173994bb7ec7ee7f6251b7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving the address of a peer from the net_buf, care should be
taken so it happens before the 'data' pointer of the buffer is modified,
which causes the macros to retrieve the address from invalid positions.
Change-Id: I466fb989119ab5f7d0ac3899979670675bdaa946
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change definition name suffix to WPANUSB
Change-Id: I3456ebff061866a67b7a07b33f6ff83a31a2d7a8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit updates the README files to reflect that ZEP-1036
is already solved.
Information about ZEP-1097 and ZEP-1098 is now included.
Change-Id: I3c83160962d308d374823e086bbf083dca988606
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit modifies the conf and Makefile files of the DNS client
application.
Inside the Makefile, the CONF_FILE variable is updated to include
the BOARD name, therefore prj_'board_name'.conf is used from now on
to refer to the conf file. The right conf file is selected by passing
BOARD='board_name' to make.
Configuration variables at the conf files are also homogenized.
Change-Id: I6f5aaad0b52d458bceb90b315aba2b31f085c0a0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Implement serial-radio protocol used in Contiki-based border routers
to interact with 802.15.4 devices connected over serial or USB-serial.
Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This creates initial TCP handling logic but does not yet
enable fully working TCP connection.
Some of the connection logic is taken from FNET TCP
implementation.
Origin: FNET 3.6.1
URL: https://github.com/butok/FNET/blob/master/fnet_stack/stack/fnet_tcp.c
Change-Id: I1e100d9fa9c91437562b933d94d0bd3db1a5885e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds support for the Arduino 101 board with the
ENC28J60 Ethernet module.
Change-Id: Ib852e9cfb2b3b2188d3320e00d6bc24620e187f5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using
mbedTLS, and native IP stack
Jira: ZEP-900
Jira: ZEP-943
Change-Id: Ica17b047aab11b989d3e8c8f6ac1b79e3041053a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This ports zoap to the native stack.
Just for reference, and totally not scientific, here are the numbers
using the old stack:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
34657 10316 16916 61889 f1c1 outdir/qemu_x86/zephyr.elf
With yaip:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
30575 9148 6164 45887 b33f outdir/qemu_x86/zephyr.elf
Jira: ZEP-818
Change-Id: I7992a3e2af7d419081ee5a64d7cc2d49fb628ead
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
This commit adds the DNS Client sample app on top of the new native
IP stack. This sample app supports IPv4 and IPv6. See README_IPv4 and
README_IPv6 files.
Origin: Original
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Id78bd634c44e216fd45b395c91d95b71ef68c976
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the legacy DNS client sample code.
This patch is part of a commit series that will add support for
DNS client services on top of the new native IP stack.
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Ieb3366b21a365b8f77e576109c64c0fc4218aabb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
In some cases the BT header files are missing and the compilation
will fail when done by sanitycheck script.
Change-Id: I484e1f0c23975053e947bc57ff3c9f4042fad71e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Export ieee802154 radio over USB to be used in other Operation Systems
like Linux. In this scenario Linux SoftMAC driver would be used
implementing ieee802154 stack inside Linux.
Currently tested to work with Raspberry Pi and addon ieee802154 board.
Change-Id: Iabcbbfcaad8e3935a63faca50a19fb624e78a351
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This will use the dedicated UART pipe driver to send/receive IEEE
802.15.4 "radio" frames.
- make
On one console:
- make qemu1
On a second console:
- make qemu2
Note:
net-tools is needed, cloned into net/tools
https://gerrit.zephyrproject.org/r/#/admin/projects/net-tools
Change-Id: I833cd40238b0653bb5b9a9b462fb4d5d2a3504b9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net tools directory is now in net/tools
- fixing the 80 chars line limit
Change-Id: I079880fa3449beffb326369ab23550dcba3ccf20
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
More samples will come. Current one is meant to test ieee802154 with
cc2520 on quark_se_devboard target. Some future sample will show how to
use the Qemu uart pipe fake 802.15.4 radio driver for testing on one
host.
Change-Id: Idea2b16cde091c7da926ca8aa71912fbfd0a3d62
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If no IP stack is seleceted, selecting one of the 2 cc2520 driver will
automatically select the relevant stack.
Change-Id: Icca22da190dc790ce6d302e14c45732f902e02ae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv4 address to be 192.0.2.2. The host
IPv4 address should be set to 192.0.2.1 in this case. This change
is similar to IPv6 address change made earlier (now both IPv4 and
IPv6 addresses on device side end with "2", on host side, with "1").
Change-Id: I639b7be4403b4b2f38f01675d0ef56eaabf0f82c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv6 address to be 2001:db8::2.
The host IPv6 address should be set to 2001:db8::1 in this case.
Change-Id: Ia967cecabece4b06a2f5a12b11c68a9de4aeb2af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the correct location of net-tools project files to
samples/net/README file so that the user can test the
echo-server and echo-client apps using SLIP and Qemu.
Change-Id: Ic34fa6e67da916c63e4f138e1e0def5d7632c80c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Debugging messages in 6lo are enabled as well.
Change-Id: I8fea044216e3c4e60d742ebc7256489832ae09ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Meant to setup a real 802.15.4 device, changing channel, pan id, etc...
Change-Id: I221ad197aa221bc8f9ec67d0fd523da2023f7979
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Echo-server no longer reverses the data as doing it
when we have a fragment chain is quite challenging.
Change-Id: I298669f3ddba67000672320e7b3b14f72e9f12d4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context.h is missing and one variable had a wrong name.
Change-Id: I4aac2f5c12cea39553fb86d1bd497c88f0ef1963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This allows to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space that is specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements a modified version of CDC ACM class driver
in a WebUSB compatible way. It adds the WebUSB descriptors,
custom and vendor requests handlers so that the host OS and
browsers can get the required BOS descriptor and supported
origins from the device. It also adds a custom interface
class so that the interface will not be claimed by the host
CDC ACM driver.
A simple echo app also included in this commit to demonstrate
how to create and use a WebUSB interface, as well as the
communication between browser and WebUSB enabled device.
WebUSB Spec: https://wicg.github.io/webusb/
Origin: Based on CDC ACM device class driver in Zephyr
Jira: ZEP-744
Change-Id: I2eac10bd718e8fce35cda52e7c2ac425c3210e23
Signed-off-by: Sudarsana Nagineni <sudarsana.nagineni@intel.com>
Tag all legacy kernel tests and samples as such.
Change-Id: I43b24acb71c282ed14ff6e6ef06c9542bad86f6a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exiting from the test case when the i2c device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ib11224ef2a78170f6e4d20545f645b4f2ea4a181
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference.
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I7aafbc993674c8874a16b5a9213108f5769114ec
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Removes a redundant check flagged by coverity.
Coverity-CID: 152005
Change-Id: I8cc3a64c42e04a2d52deed11d9022ed4a49baaa7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
By adding external hook to sys_log we will allow applications
the flexibility of using various output mechanism such SPI,
flash, FS etc.
Jira: ZEP-1172
Change-Id: Ie32a5e52c3946ada0349b75a35cc107bb29385a1
Signed-off-by: Yossi Havusha <yossi.havusha@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove nano kernel references found at the README files.
Change-Id: Id42f4797561f3d7674110bb84531b5f6e487decd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit replaces the x86 asm line:
__asm__ __volatile__ ("bswap %0" : "=r" (x) : "0" (x));
by the sys_cpu_to_be32 macro.
By removing the x86 asm instruction, the nfc_hello sample app
can run on other platforms.
Jira: ZEP-1348
Change-Id: I440e96cd06e70a88552d179a2288c9918e6ca0b0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
To have one project use more than 32 priorities. The preempt priorities
are also aligned so that they straddle two priority bitmaps.
Change-Id: I0f0862110d876e40fde45a0d105b769e8603d644
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
If an i2c transaction fails the sample will hang the program into
an infinite circle.
This commit will remove the infinite circle and report back the
error code from the i2c transaction.
Change-Id: I38d350a805af6bec43f2fa8d4af6ce4e3cc27662
Coverity-CID: 151991
Coverity-CID: 151992
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
If the gpio or spi devices are not found there is no
need to keep the device busy in a loop for this particular
sample.
Since it is not possible to continue execution it is better
to simply end the application.
Change-Id: Ie25ea970a479db2a2f339ca2b37f88541a45ef97
Coverity-CID: 151973
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Fix usage of an uninitialized variable detected by Coverity.
In theory GCC should pick up this situation, but it does not. I've
experimented with adding -Wextra and -Wuninitialized but I cannot get
GCC to complain. I might be missing something else, but in the
meantime, this is a simple fix to remove this issue.
Change-Id: I6fec37719719dfaf7077ce1f464605c93efa8ea2
Coverity-ID: 152054
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Proceed to LCD programming only if device binding succeeds.
Otherwise, dereferencing a NULL pointer will happen. This
was caught by Coverity.
Coverity-CID: 151986
Change-Id: Ibdb658f530203428aa3e53f358e0788fc1502b06
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Stop the app from running if device binding fails. Otherwise,
dereferencing NULL pointer will happen. This was caught by
Coverity.
Coverity-CID: 151988
Change-Id: I8245d938498a51123249fbd069935900ad660314
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The memcmp is a comparison between two strings or buffers.
So, the length should be the buffer length, not the length
of the pointer to the buffer. This was caught by LLVM.
Jira: ZEP-1179
Change-Id: I7fd6b199686b19e7f4a2e1288897483e69ad091e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This commit fixes a missing function return check reported by
Coverity.
Coverity-CID: 151949
Change-Id: Iedf090b7f2ded9f20ff6d796f1cd5c02990b0a4e
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I44f13131d44c7c093781e1f11f8481e7ef8175c9
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ifaed47b2b48359dacfdb3111ca2895d5912779e6
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The data structure member being used is character array,
dereferencig this array gives **char instead of the expected
*char type.
This issue was reported by Coverity
Coverity-CID: 152030
Coverity-CID: 152033
Change-Id: Ied67e4b2d47017e6ad5e40b9b6fca1b496c483ed
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The sensor_channel_get return code is now evaluated.
Change-Id: Ib931d6caba65af7195bad53c62e6e5a3033b49e8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove redundant platform filtering and only use SOC filtering
Change-Id: Ib823e076a874ce61a235eca63eebb7f19d2fdd30
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I084406601badc64c257cbdd82b9c8b7509549303
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I402c348af142342e37e93619c4da6e3a5bfd82da
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample was created intially when there were no other
samples in place to enable the CONFIG flags to build code
inside those flags. However, those CONFIG flags are now
guarded with corresponding "SUPPORTED" flags which are
enabled based in Kconfigs of socs based on their support
for that power feature. This app is for x86 and those
features will not get enabled for this configuration. If
it is still required, then we would need to fake such
support in Kconfig.board of qemu_x86. Removing it, because
those flags will get enabled by sample and test apps of
socs that support the power features, causing code inside
them to get built.
Change-Id: I647be9289a49d69880811abee499a4efd61bbc6a
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Cleaned up and removed some unnecessary code to avoid
distraction from main sample implementation. Updated some
logic based on new PM interface in soc area. Updated README
to indicate it supports x86 and ARC and updated sample
output of both architectures.
Change-Id: I1c9c8348dae403b7ca6fe17ab867e3fbef06ae60
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick. For this to work well we need to fix a tiny
bug in the dependency handling in Makefile.inc.
Change-Id: I6571bc681bc34155f37cff1eccc2ea12ed52ef07
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Sample to show the USB UART console output.
Jira : ZEP-775
Change-Id: I70220daf8e63a0847b10cc094665ef6a4bc38907
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
convert all sensor drivers to use threads and the unified kernel API and
remove all legacy APIs.
Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Switch from fiber_start() to k_thread_spawn(). Also switch to
k_yield() from fiber_yield() in the same go.
Change-Id: I2dc480310f981112063651b61b0ceedf38601bee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_delayed_work.
Change-Id: Ie20fb47fc6d5c486ff885ad583354eb715d12c1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Currently the ideal buffer counts for a controller-only build are 6 RX
buffers and 7 TX buffers: ATT_MTU of 158 bytes can be sent in one
connection interval of 6 tx/rx -es wherein connection interval is
7.5ms
Change-Id: I64b4620c5e8e7db8d7ed72fa1db82e266e121f27
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant semicolon from the end of a while loop.
Change-Id: I02cef7879efe0d6eeae59595e14fb1d9b00a6d52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If support for the controller assert handler isn't enabled the
function shouldn't exist.
Change-Id: I72076eb1001980f102a0404c91d22e41582ced25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use a controller define if controller support is not enabled.
Change-Id: I837b3b66f010dfbdf2d9099acd85fa29fce954b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit doesn't have UART HW flow control, so it needs to be
disabled to build for the board. The baudrate is also lowered to
115200 since 1Mbps is likely to be unreliable without flow control.
Change-Id: I1725a2a1e46cfbc0f57b4f5c4ee57ff52d9670e9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
This reverts commit d4d9ac2d21.
This is broken:
core:static_lib(master): sanitycheck -T .
Generating LALR tables
Cleaning output directory /home/nashif/Work/zephyr/sanity-out
Selecting default platforms per test case
Building testcase defconfigs...
1 tests selected, 28 tests discarded due to filters
total complete: 1/ 1 failed: 0
1 of 1 tests passed with 0 warnings in 0 seconds
Traceback (most recent call last):
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1887, in <module>
main()
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1879, in main
ts.testcase_report(LAST_SANITY)
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1551, in testcase_report
rowdict["ram_size"] = goal.metrics["ram_size"]
KeyError: 'ram_size'
core:static_lib(master): find -name *elf
core:static_lib(master): make pristine
make -C mylib clean
make[1]: Entering directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:19: *** $(O) is not set. Try `make all-mylib` from hello_world. Stop.
make[1]: Leaving directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:37: recipe for target 'pristine' failed
make: *** [pristine] Error 2
Change-Id: I61700b0df34790aef94a6700c7c7e0605343787f
Signed-off-by: axy <anas.nashif@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick.
Change-Id: Iafe045ccc5dbbbd4063f836cc63057b4b06f7727
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Sample to put the device in USB mass storage mode via
config options.
Change-Id: Icaf4839d8e8ac0526d1b723adc87607d6b4df9d7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add kernel functions to kernel module and make it part
of the shell sample.
Change-Id: If5e8ff8ce7b8edbbb8d62509964700b007eaf88b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Port the sampe apps to use unified kernel and its apis.
Change-Id: Iee0a21df8008f27cfdbc9db50b66bd183d531f9c
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These testcases can't build on common platforms with 16K or less of
memory.
Change-Id: Iade2aa423f42a1f174a5ebb5d183b362917f503e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove this sample app. The component is no longer on the
board (quark_se_c1000_devboard).
Change-Id: I342616781e6f343cfc66b89cbdf85de5844f6f4a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for lcd hd44780 app.
Some delays were rounded up to multiples of millisecond, since
k_sleep only takes multiples of millisecond. Based on the lcd
datasheet, this should not cause any problem.
updated some comments based on what the code is actually doing.
Change-Id: I533c822dbaea0246dcd62a76cc23ce0d8edd4630
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for the watchdog sample app.
Change-Id: I6b53f066033a451c3aafe7f3a528c7f3461ae305
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix minor style issues with excessive whitespace for alignment and
lack of 'static' for the tx_fiber_stack.
Change-Id: I0c761e94e6a6789a3772b08b0774cd1a5e73c2ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Right now the hci-uart samples doesn't really work anywhere else than
nRF5x, so make that the default configuration. Also rename the old
prj.conf to generic.conf to give a generic starting point for creating
configurations for other targets.
Change-Id: I1c940339b457d0e77c8ddad4b2474fc7e5b12a51
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In 3 of our UART driver implementations the ISR is exclusively
used and enabled for the RX path. The existing logic was
susceptible to a stall situation where a polled out transmission
would be interrupted by a reception and then the ISR code
would loop forever due to the TX event being signalled (although
the interrupt itself was disabled) causing the ISR to keep
looping for an RX interrupt.
Change-Id: Ic379e58b1c974aca3cee37d2d81f12c3726fb160
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There's no need for this app to use the HCI driver API directly.
Change-Id: Ie5acfbfb09fc3f86c3f29f22fbf7da7db1ff2127
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We are building for unified kernel by default. This avoids running the test
twice.
Change-Id: I2951464f448b3019c236ce5943df55c052b427d9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make it run on Qemu only, this test is not intended for HW.
Change-Id: I842d7456f9238221ef5b661749136f4418d5ab16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ztest was not working with unified kernel and v1 APIs and not many tests are
using ztest right now, so instead of making it work with old APIs, convert it
to unified kernel completely so that new tests written using ztest would be
unified kenrel based.
Change-Id: Ibfcc7783dcb266abbd388662ba61c4b55d32b10c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new pwm app (rgb led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a rgb led is added. It will use the new API
pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: If8e5d8ab22dcf8b7cf3665e38949715c61ca9c03
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (motor control) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a servo motor is added. It will use the new
API pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: I65857848e64d0478c4e12d1317b2089cdd1ecf5c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (fade led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to fade led is added. It will use the new API pwm_pin_
set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: I8d929a21f7de88307c47b52f98f131e00b2fdbe7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace existing APIs which will be deprecated by
the new API in this app and rename the app.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
Since the two existing APIs (pwm_pin_set_period and
pwm_pin_set_values) used by this app will be deprecated,
this change is to replace them with the new API
pwm_pin_set_usec().
To demonstrate the usage of the new PWM APIs, more apps
will be added. All the apps will be located in their own
sub directories. The existing app is actually one to
blink LED. So, it is moved the "blink_led" sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: Icc3fbf6b6c25db9590c63bc08f40ec62c87c0f16
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Some minor cleanup and rename of c file to main.c
Change-Id: I8635c9c044f194c5527cd696e9065656403d10c4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adjust the dhcp_client sample Makefile to select a project
configuration based on BOARD rather than interface hardware. This is
more convenient for supporting other hardware than the current
organization and is consistent with various other samples.
Change-Id: I0f59b632144dfa875dc036ec6f4aa4f6657a79bc
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a config file for boards using the Nordic Semiconductor nRF5x
ICs with reasonable defaults in terms of UART configuration and
controller settings.
Change-Id: Iaa5904c96c0f40a2749b7dda0398dd35fa809f24
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include zephyr.h instead which properly includes nano or unified kernel
headers.
Change-Id: I41c848092d022e2b0737ae6b2b53084eaf9bc6a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to the fact that ISRs run at priority 1, the LE_Rand
command was not being rescheduled after CPU sleep to be
able to fill its buffers. By performing all TX (to controller)
work on a fiber, the RNG ISR is able to run and the command
can be executed synchronously in the fiber context.
Change-Id: I3b658e1cab3f80ae655cc88566639a122a361a08
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add short descriptions for what the hci-usb and hci-uart applications.
Change-Id: Ie06cfa1678243e97b49e5594a00086cbf3c343be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Lets not confuse user with this code, it is clearly not a sample.
Change-Id: I3a0209fb34b2c97383b0f5382f156b80470fdaf7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Created unified kernel build setup for the power_mgr sample
app. Currently it shares the same source file between
micro and unified kernels. This is to help test and add new
features from unified kernel. In future, separate source will
be created for unified kernel. After transition is completed,
microkernel version will be removed.
Jira: ZEP-1140
Change-Id: Ic3a0b5cb3adc0749a7084ad785a041fee5875f56
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Also demonstrates use of k_thread_spawn() and K_SEM_DEFINE().
Change-Id: Id2f32ea38d2b5fea40f90a7ef6665231e4158cb3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- remove useless Kconfigs
- remove SPI DW kconfigs, we now use QMSI driver
- Cleanup readme and turn into ReST
Change-Id: Ie1f39e0afabf499fa81627ded59adf267e01993a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enhance documentation and build for Quark D2000 Devboard by default.
Change-Id: I3417c31a8898a076465d25f45d7821820b480290
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test is modified to key on CONFIG_TASK_MONITOR instead of
CONFIG_MICROKERNEL, since that is what it was really interested in.
Also, this allows the unified kernel to work w.r.t. task monitoring,
since that is a concept that is alien to the unified kernel, since there
are no more task transitions recorded as part of a kernel server. The
unified kernel does not have a CONFIG_TASK_MONITORING option.
To make this work, since the kernel_event_logger sample makes use of the
philosophers demo, the latter had to be modified as well. The nanokernel
philosophers demo would not work with the unifed kernel since it
identifies as a microkernel, and in that case the test would be looking
for symbols defined in an MDEF file, which the nanokernel demo does not
provide of course; the same thing applies to the nanokernel
kernel_event_logger sample. Instead, the demo defines NANO_APIS_ONLY=1,
which is really what it is interested in. To allow that definition to
exist, the nanokernel philosophers demo and both the nano/micro
kernel_event_logger samples add src/ directory with its own Makefile and
add their own phil_fiber.c and phil.h files, which simply include the
original files from the microkernel philosophers demo. As a final
change, the kernel_event_logger samples need a different prj.conf file
for the unified kernel, since it needs a bigger idle stack than the
default, since the kernel event logger does work in the idle thread when
the kernel goes to sleep.
Change-Id: I4cac45a32d09d6ca1de052a368b3219f64889869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A bit of work has to be done by someone why wants to run the demo with a
different number of threads than the default.
Fixes ZEP-1077.
Change-Id: Ibb5cfed2bd9984bcf0f9d65f957f32daf4c5211e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Microkernel and nanokernel tests now use customized source code
to eliminate use of MICROKERNEL and NANOKERNEL config options.
Change-Id: Ic3617df34487911af1607ab46f469c5e1212d3f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This sample justs outputs the SPI FLASH IDs.
I think we should improve this to also output done, otherwise
it looks like its stuck or something.
Change-Id: I18d5919c1e25bb5aaa9ceba53793cc14b15f3c77
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be reverted once input is supported in QEMU.
Change-Id: I4bc946f1634bf9ebd17b697f0da7ce2f813e5725
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Got out of sync with the revised signature of k_stack_init().
Change-Id: Ib4c67c75f30055583a457bfb13f8dacc9929ee88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Old markup was using %(target)s, which is not the right markup to use,
so it was faiing to build.
Change-Id: Idbe99cfdd695284dc2a66e5823bc65a1417fbfd3
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Implement resources so they conform to what the ETSI plugtest suite
expects.
This allows the zoap-server sample to pass most of the tests of the
CORE[1] group, only TD_COAP_CORE_09 is not implemented.
Tests involving lossy networks weren't run as well.
The tests were run against the libcoap[2] client.
[1] ETSI CoAP test description
http://www.etsi.org/plugtests/CoAP/Document/CoAP_TestDescriptions_v015.pdf
[2] libcoap
https://libcoap.net/
Change-Id: Ifa3ed21a93052e02f47e99d7cb6d9d4b28e576d8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This sample uses the grove temperature and humidity sensor and displays the
read values on the grove LCD.
Change-Id: Id6fb6171c26c97f1b01008fa06a4dc85287d7545
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The path and port used by zoap-client were different than the ones used
by zoap-server.
Even if they are different applications, for consistency, it makes sense
for them both to be able to talk to each other.
Change-Id: I883d59c77bc3800b4f0965ba7bcf96a08e545d29
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uIP keeps the port separated from the IP addresses, so if the
application wants to communicate with a remote endpoint we must also
have the port information available.
Change-Id: I8e2b01fe5717166e1f9cebcc74b2056325b8ccc3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Origin: Original
Change-Id: I0927c25fbbba5d4863f199d058d311c10d52d784
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization: SEMAPHORES, MUTEXES, STACKS, FIFOS and LIFOS. To
configure a specific object, set the value of FORKS to one of these.
By default, the demo uses MUTEXES.
The demo can also be configured to work with static objects or dynamic
objects. The behaviour will change depending if STATIC_OBJS is set to 0
or 1.
By default, the demo uses dynamic objects.
The demo can be configured to work with threads of the same priority or
not. If using different priorities, two threads will be cooperative
threads, and the other four will be preemtible threads; if using one
priority, there will be six preemtible threads of priority 0. This is
changed via SAME_PRIO.
By default, the demo uses different priorities.
The number of threads is set via NUM_PHIL. The demo has only been tested
with six threads. In theory it should work with less than six threads,
but not with more without making changes to the forks[] array in the
phil_obj_abstract.h header file.
Change-Id: If7a0a34b216929a661245fd921a32ec413df8a4a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a nanokernel sample and the MDEF file is not being used at
all.
Change-Id: I344adfa9394329258144de88521764974238f6a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Excluded Quark D2000 because there is not enough RAM to
build the sample.
Change-Id: Icc772e0aaca2be8731eae8f986eed17782beb445
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
.ini format supports long lines by prefixing the continuation with an
empty line. Adding a backslash makes the backslash part of the value.
Change-Id: I0a1ade3a6bdf12281e61d06e21d7233d4b624b48
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Boards that cannot support microkernel applications for memory resources
are excluded from microkernel build test.
qemu nios2 board is excluded from nanokernel because the Altera JTAG
UART not implemented yet
The kernel even logger buffer size for nanokernel was reduced from 1000
elements to 500 to allow the sample to fit in the Quark D2000 board.
Jira: ZEP-698
Change-Id: I0c5cc4c0bfc27940a758dcdd8ff0e01ad7f4b88c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The sample applications for task profiling requires a default
project configuration file that can be used as reference for
any other board.
Quark SE dev board has some optional optimizations that can
be added using the prj_quark_se_devboard.conf file.
Some redundant symbols were removed to simplify the reading
of the configuration.
Jira: ZEP-698
Change-Id: I71d584d4454392e740f8b7a2c2f47206b76c3abf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This patch adds the micro support for the shell application
Change-Id: I4499a8660323f1fa61ff3bbf6e7a3026a7dba77a
Signed-off-by: Yong Li <sdliyong@gmail.com>
This commit removes deprecated APIs and replaces them with routines
that provide similar functionality without the flexibility originally
offered by the deprecated APIs.
Removing deprecated routines will help us to be prepared once the
new IP stack is ready (ZEP-793). Furthermore, this commit will also
help us to move our current DNS Client implementation to the lib/iot
directory, as specified by ZEP-847.
This commit removes the netz library from the DNS client sample
application. UDP functionality is replaced by primitive routines.
Specifically, the following changes are applied by this patch:
- Remove netz routines
- Remove app_buf data structure
- Introduce primitive data types in the DNS client code
- Introduce primitive network routines
- Add a header file containing configurable parameters
Jira: ZEP-793
Jira: ZEP-847
Change-Id: I0302133da77308f0cdd9ace2c0265e6b77673ff0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is only meant for Contiki based IP stack.
Change-Id: I53cbcb7da0bd13ad87243fd70974cec0bd31072e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding these tests allows to find issue with QMSI update.
Change-Id: Ib247bee6a5dbdd60aed759b4908e9ae7751d5f78
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change tags to reflect the type of samples, in this case it is all
about sensors.
Change-Id: I9f87e8683dd52fd757cd07ba5aa9fad99d17ab38
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this app, since the sensor is not on the
board any more.
Jira: ZEP-763
Change-Id: I931acfe9f01b817bc0b24a4e0745bf759e53da90
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Don't try to detect the UART device manually, the list is missing a
bunch of boards (the Quark SE sensor subsystem variant, and both
Arduino 101 halves). There's a config variable for that.
Change-Id: I903e52dcb6025e5da824faadb5e4bc59221fa210
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This output is going to a terminal device, not a Unix tty descriptor
which will cook the output for us. Newline moves the cursor down.
Carriage return moves it to the start of a line. We need both.
Change-Id: If93d1a85d16cea93b4788fa55e694a7b77055bfe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed tests that will fail when using ISSM toolchain because
there is no g++ inside.
Example:
export ZEPHYR_GCC_VARIANT=issm
export ISSM_INSTALLATION_PATH=<ISSM PATH>
sanitycheck -p arduino_101 -p arduino_101_sss -p quark_d2000_crb \
-p quark_se_devboard -p quark_se_sss_devboard
Change-Id: I532d4f0e0095472cbf3428cb8355167a320a10a0
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The KNOWN_ISSUES file describes issues and workarounds for the NATS
and DNS sample applications.
Change-Id: I9a33a82073707dbdd4109e0740108b99c42ad772
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Excluded Quark D2000, Nucleo F103RB, Olimexino STM32 for the
sample test_15_4. Boards doesn't have support for 15.4 neither
enough space.
JIRA: ZEP-738
Change-Id: I963509a77cdf6a8ff2efee2f2d4a498e3c07f9b5
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Kconfig allows selecting NETWORKING_WITH_15_4_TI_CC2520 even if the
current board doesn't support it, and also selects it by default. This
breaks building the 15.4 sample with qemu_x86. Add a config option for
having CC2520 support and enable the choise only if it is available.
In addition, remove unused function from iee802154 code, as it now
fails the tests.
Jira: ZEP-697
Change-Id: Ib082f82acdd0f86d3306bbd3bb827f61b0fd0be1
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
According to last comments posted in ZEP-632, the unref routine must
be called only when net_send reports an error.
Jira: ZEP-632
Change-Id: I11553edf2c7d686c3e58617c2e05b6f18962955e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Incase of slip or ethenet use, if these is too much incoming data
current buffer count is not sufficient. Noticed with TCP client
and server example. So increasing it to avoid not enough Rx buffers
issue.
Change-Id: I6eef51c28c7c4751955aa4403122bf17d55ce12c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The app has updated the text it prints (which we were looking for) so
this was causing a false negative.
Change-Id: I3223a0dec8e44b0f89caf73626ffff82d74ab24d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
README files are updated to include information about the
warnings displayed by the compiler.
Applications affected: DNS, NATS and MQTT.
Jira: ZEP-681
Change-Id: I482c3bbf37c5d9af3bb43b7ef5e58957bac2852a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
NET_TESTING_USE_RFC3849_ADDRESSES not defined as a Kconfig option.
Enable this in Makefile like this
ccflags-y +=-DNET_TESTING_USE_RFC3849_ADDRESSES=1 incase if you need
it.
Change-Id: I96b05d069cf5baa56cc27489b3c38b84412eec97
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The event logger nanokernel sample application spawns
application fibers and system fibers. This commit reduce
the application's fiber stacks to reduce the global
application RAM footprint and allow it to run on smaller
platforms like Quark D2000.
Jira: ZEP-526
Change-Id: I98f899892e5c5d8ce84f97f6768444cf67277a1a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Zephyr's MQTT does not implement a client's message queue.
So, a race-condition may be present when multiple messages are
received and processed.
We remove the pinreq function call to allow the mqtt_read function
to handle all the incoming messages.
CONFIG_IP_BUF_RX_SIZE is also updated to allow more messages to be
queued by the IP stack.
Jira: ZEP-669
Change-Id: Ie3ef55b17020e04c6540adf975a66fb004933914
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the goto statement to create a common exit point.
Remove redundant code when possible.
Change-Id: I2e22483c6fca4cb501b401164faf97d585ecec3c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The previous version of the pingreq handler function leaves
the semaphore blocked if an error condition is detected.
This patch solves the above described situation.
Change-Id: I4897609fae3f6523244892ae38ffdc5ae85f852d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The previous version of the DNS Client sample code assumes a
little-endian machine as a target. In this patch we use the byteorder.h
functions to handle the cpu to network order conversions.
Theoretically, this code must run on little and big endian machines.
Cosmetic changes are also applied to other files.
Change-Id: I2b47f6252fa070e0a0253666fde1785530d6aebf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
README_API file is added in this patch.
Inline code documentation is improved. More test domains are added.
The README file is also updated to reflect these changes.
Change-Id: Ie670a6559611c6a8d216470e245dbea48369696f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
MQTT unsubscribe message was not included previously. See ZEP-623.
So, this commit adds the handling functions for the MQTT UNSUBSCRIBE
message.
MQTT high-level API return codes are now unified to only return:
- 0 on success
- -EINVAL when invalid parameters are received
- -EIO on network error
API documentation is also updated to reflect the previous changes.
Jira: ZEP-623
Change-Id: I04d65c303762ce2ecaca73a4f222f0b77fe70503
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The UNSUBSCRIBE and UNSUBACK functions are added. These functions allow
to create the UNSUBSCRIBE message and to read the UNSUBACK message,
repectively.
Another function to create the PINGRESP message was also added.
Jira: ZEP-623
Change-Id: Ic055e5762051cc9fb5d59a19c6eb974e34014d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
README file now has a Troubleshooting section. It could be useful during
tests.
Change-Id: I925812b9bd62ac00a2f404939c1c0b7d9cf4dfd2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch demonstrates how to use the MQTT UNSUBSCRIBE message.
The publisher application is updated to fix a typo.
Jira: ZEP-623
Change-Id: I2c302c9f9320687fc39f36726394417db89f06d8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The zero bytes hack to connect was deprecated by last
commits, so now we send 1 byte initialized to 0 :).
Jira: ZEP-612
Change-Id: I372964bbb102811d33509ad9386d9b360032a180
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The zero bytes hack to connect was deprecated by last
commits, so now we send 1 byte initialized to 0 :).
Jira: ZEP-612
Change-Id: Ie9e65fad3945d0babc4287e287be3aa57d68ed5a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds a README file describing the known-limitations of our
implementation.
Change-Id: I174db79783861f145ae224eca86f3fe4968e0205
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch standardizes the return codes:
- 0 on success
- -EIO on network error
- -EINVAL if an invalid parameter was passed as argument or
received from the server
API documentation is also updated to reflect those changes.
Change-Id: I076d195fde7c6b32b4a52454f312fb8cd8ce2332
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove generic PRINT macros from button samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Iae35d69a6a8473afdc1003ed629a21447a6f9a4a
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from aio samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: If50d8de2256f38902b5a4b68c57553cb5e8b8a94
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from pci samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I5a556637c441b1a4117eb75463d66f7127355a59
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from flash samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I2a9b69e9eb82bbdb03af563bdc49c7ed51681580
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from spi samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Ie377c7bba8b3cf2de05976cef5c4d814fa62b647
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from power samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I65a1caf2e3c2bd78f37d6443f180d674e9562af3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from hello world samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I15224913179cdb4832f8185c4dfa85623ada6109
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from synchronization samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I1f0a9d66db136c41c29a75b3e02e414b822f881c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from usb samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Id90c657b05c3b3b9e326f3c1e08d8e8fb113714c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from sensor samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I474efcd1daf8e621acd50d88b3a9662b8cd2b516
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Fix several issues which are causing the BMI160 app hang.
For SPI duplex transfer, QMSI only supports equal length.
For SPI freq, divider is used. Actual freq is no longer used.
Jira: ZEP-461
Change-Id: I1a1bcc12c6514c3797686dfdad1ce1b852f7dc78
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add testcase.ini file for qemu_x86.
We detected an unexpected behavior in sanitycheck before submitting
this patch:
In testcase.ini, if platform_whitelist contains more than one
platform only the last platform will work. So, here we just use
qemu_x86.
However, we believe this situation is caused by the structure of
this sample. See mylib/Makefile.
Jira: ZEP-621
Change-Id: I656c1b9a69b93fd9f7b0d98a69f49b9641918a93
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Current code tests treats "" (quotes included) as an empty value for that
varible (as coming from Kconfig). However, that file also used to
integrate with build systems for 3rd-party components, e.g. as examplified
by samples/static_lib, and in that case it will be just an empty string.
So, first strip surrounding quotes, then test for empty string.
samples/static_lib: Update for recent Makefile.toolchain.zephyr changes.
Makefile.toolchain.zephyr is 2-pass now, so needs to be included twice.
ARCH needs to be defined *before* including it. Otherwise, just used
CROSS_COMPILE and TOOLCHAIN_CFLAGS set by it.
Change-Id: I56e963d0d107c77390395682d60400cf6ca62337
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add helper function for printing sensor_value to char buffer.
Change-Id: I46329675d9a69376ea74c4f7dfcb270ca2078c72
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT subscriber
application.
To build this sample, the Paho's MQTT Packet Library is required. See
the README file.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: Ibeb175ee2c4594b8961c60f2a0d25296c238401c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Demonstrates the use of flash storage media for file system. This
uses the on-board SPI flash on Arduino 101 board.
Jira: ZEP-447
Change-Id: Ia571cff743f338d57922df68172e94c3f18a802d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Demonstrates the Zephyr file system APIs. This currently
runs on FAT FS using RAM emulation of disk.
Origin: Original
Jira: ZEP-285 ZEP-228 ZEP-481 ZEP-446
Change-Id: If459b8c2f819a2a38c8c4d805ec3f689dfcdef17
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
USB DFU sample application is now using new system log macros and
updated the .conf file.
JIRA: ZEP-311
Change-Id: Ifa5ede70c06a5fe18dde865fa7e97f469364ddb8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS subscriber
application.
Change-Id: I25a7465b7163a09a0163859076a97b1e258a06f1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS publisher
application.
Change-Id: Ifeac3bf03b7febafcee927b1d2ec256685885fd8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code shows how to write a DNS client application.
Only client functionality is implemented in this sample.
The code is self-documented. Read the README file for more information
about the network setup.
See https://tools.ietf.org/html/rfc1035 for more information about the
DNS protocol.
Origin: Original
Jira: ZEP-500
Jira: ZEP-501
Change-Id: Ibcfa4e392143fdc2258971304d5296d70c1c9423
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT publisher
application.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: I13ac5ca1da2cd4d984fb595b599c3eab4edc5bf0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
DesignWare USB driver is now using new system log macros, updated
the Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: Ief46cadd954ca4b30a3a1cf2eba6e44ccbc9bc9f
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
USB stack is now using new system log macros, updated the Kconfig
variable to be a level rather than a bool and the .conf files at
samples.
JIRA: ZEP-311
Change-Id: I873ee0f12b81a364307cdac27a2e058a43d4c9ea
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
DMA sample application is now using new system log macros and updated
the .conf file.
JIRA: ZEP-311
Change-Id: I11dbd5c58205297751696e483fc049c1c4b7654c
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This is a client that uses shared keys to execute a TLS handshake and read
info from the server, information on how to run the test is in the README
file.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: I10f31f3635f346936807b7c8470b3d6ffb3af283
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Debian and Ubuntu distributions come with an old version of the
mosquitto server that does not support MQTT 3.1.1.
So, the MQTT applications' README file is updated with this
information.
Change-Id: I1c76c757b5a15aa2bdd192bd912835a417cb0031
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code demonstrates how to write a NATS subscriber
application. Code is self-documented and a README file is also
included.
This sample code uses the netz API.
The NATS protocol specification is available at:
http://nats.io/documentation/internals/nats-protocol/
Origin: Original
Jira: ZEP-415
Jira: ZEP-573
Jira: ZEP-597
Change-Id: I4b7e56bb6c2a934012b33039ea5b313b14f3b4c5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code demonstrates how to write a NATS publisher
application. Code is self-documented and a README file is also
included.
This sample code uses the netz API.
The NATS protocol specification is available at:
http://nats.io/documentation/internals/nats-protocol/
Origin: Original
Jira: ZEP-415
Jira: ZEP-573
Jira: ZEP-596
Change-Id: Ieb6e6e5f9bd48f34246b6d8c1bd9af3bbbe016bb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample demostrates how to write a subscriber application that is
able to receive messages with different Quality of Service values.
The code is self-documented. Read the README file for more information
about the network setup.
This sample code uses the Network for Zephyr API (netz).
More details about MQTT can be found in the official documentation:
http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/mqtt-v3.1.1.html
Jira: ZEP-416
Jira: ZEP-568
Jira: ZEP-573
Jira: ZEP-594
Change-Id: Ia660313439c0c61c2210abbf8ce09ff278d11a1a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample demostrates how to write a publisher application that is
able to send messages with different Quality of Service values.
The code is self-documented. Read the README file for more information
about the network setup.
This sample code uses the Network for Zephyr API (netz).
Old mqtt applications (paho_mqtt_client and paho_mqtt_shell) are now
deprecated.
More details about MQTT can be found in the official documentation:
http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/mqtt-v3.1.1.html
Jira: ZEP-416
Jira: ZEP-568
Jira: ZEP-593
Jira: ZEP-573
Change-Id: I31f8a01e143e5d446f2fb4055c1cacb9d7174517
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch extends samples/power/quark_se application so it supports
'sleep' and 'deep sleep' power states.
According to spec, in these states, the core voltage rail is turned
off. In order to be able to continue the program execution from the
point it was before entering in Sleep states, we have to save the
execution context and restore it during system startup. The current
version of QMSI doesn't provide that feature so we implement it in
the sample application. In future, QMSI will provide this functionality
and we will remove it from application code.
Even though the _sys_soc_resume hook could be easily implemented in C,
it was implemented in assembly. During Zephyr initialization, _sys_soc_
resume hook is called before the C-runtime is initialized so implementing
this function in C doesn't look appropriate. It may pass the wrong idea
that we have the C-runtime properly initialized, which is not true.
Change-Id: Id60edeb3d33c490527b94ac0f435b7f91242dd81
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This reverts commit a3c0b2c00f.
The status of the 'netz' library is still under
consideration.
Change-Id: Ifde93465da306d86aec8a71d02a16653eb7cef9c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The sample prj.conf file was using CONFIG_BMI160_DRV_NAME which doesn't
exist. Use CONFIG_BMI160_NAME instead.
Change-Id: I6eb29bf7772055a7b1fd62461fabe8e358dd10ec
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The prj.conf files set CONFIG_NS16550=n. The symbol should be
CONFIG_UART_NS16550. However, its not necessary to set this at all as
CONFIG_SERIAL=n will guard the UART driver symbol.
Change-Id: If7c40b649a94c869b13e009f67703b48e66e764f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a sample app to read MAX44009 light sensor via i2c
of quark se sensor system.
Origin: Original
Change-Id: I7078b3383021cdc81ff7b59fd1958e6bf86fe988
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a sample app to show and test how the DMA memory
to memory transfer work.
Origin: Original
Change-Id: I0ff6790d9ba3e188cd2ad93d4c9a9c2405a84ac8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Fix comment that had CONFIG_MICROKERNE should be CONFIG_MICROKERNEL
Change-Id: Ic7ad63350abe92e9f1b84f4de0d6d3bb1b43dc77
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sample code demostrates how to use the netz API. A basic
IPv4/TCP/UDP client application is provided.
The README file describes the basic setup.
Origin: Original
Jira: ZEP-567
Change-Id: I1c7d2454336dc00747044c5fc330f9ab6457ecf1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Code in samples does not follow an standarized format for reporting
success or operation failure -- thus we use markup (in file sample.tc)
to specify what shall be found in the console to consider execution a
success.
There is a few functional code modifications that add/extend console
messages so verification is possible or easier:
- hello_world, synchronization: extend the success message to also
print which core is running the testcase
- pci_enum: print message on success.
Change-Id: Idb6cea03adebe97d97854603f963f4e3d4cb856a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running independent testcases that can run on any core, in
certain platforms using the Quark SE SOC, a stub is needed in the x86
to bring up the ARC core and pass along serial port messages. This
allows the indepent testcase to be ran in the ARC core without
modifications (the same way it runs on any other core).
There is a solution planned for the future that will allow this
workaround to be removed (without need to support backwards
compatibility).
Change-Id: I2a9b7e8797d03a5a2469d7b18a3025b79226f389
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Added changes to enhance device suspend/resume involving
core devices used by OS and app. Updated with Deep Sleep
power policy usage example. Moved the arch/soc dependent
code to soc/arch dependent areas in Zephyr in a separate
patch. This app now uses api that abstracts the soc/arch
details in handling power states.
Jira: ZEP-511
Change-Id: I3b4eb0be973027dbf9bd046e16836f7863eee46e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
If the UART FIFO is already full at the start of the irq tests (e.g.
because the data from the previous polled mode test is still being
transmitted), then uart_fifo_fill() may not not be able to add the
requested character to the FIFO and so return zero.
Fix this issue by repeating retrying uart_fifo_fill() until success.
Change-Id: I055ca1d4c91d81488b89f2a9b00031b9f2b8b222
Signed-off-by: Jon Medhurst <tixy@linaro.org>
This patch adds a reference Power Management Application (PMA) for
Quark SE based platforms.
This application demostrates how to interact with the PM subsystem
and how to put the SoC in different power states. The application
"modus operandi" is very simple. The application keeps transiting
between all power states supported by Quark SE SoC. For now, C1,
C2 and C2LP CPU states are implemented. Upcoming patches will
add support for the remaining states (LPS and Sleep states).
Change-Id: Id81aadb8bf170fbb2ecfd9483ae250c786619e43
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This print showing when the profiler is flusing data to the
UART is annoying, especially when shell is used
Change-Id: I62c4466bd7f599ff995027ee19aea539d6679ec0
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Both sys_tick_get_32() and sys_cycle_get_32() declared as return uint32_t,
so print them as such.
Change-Id: Iab12696f6cc466dc11fb41402e2e671e74e61a89
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a sample which implement Eddystone Configuration Service
following the spefication bellow:
https://github.com/google/eddystone/tree/master/configuration-service
Change-Id: Ia3e74d068de03ae20191534e61b2752dd2d70211
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add short description of each sample app to the README.
Change-Id: I830e48aad226b5bf08985fbb6c218e3b5fe72b15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes it possible to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change CDC example to read and echo all the received data
before waiting for a new read interrupt.
Change-Id: I21e1646fb20a2c4f7aea2b396b633a4e0ae429fc
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This sample shows how to integrate a static libray into a Zephyr
application. A hello_world application and a small library are
included.
Origin: Original
Jira: ZEP-366
Change-Id: Idab38402b47042c3f9369b3a8e433d07d5fa4535
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
There was no need for arch-specific configs for this test
case. We now use the x86 config with CONFIG_TICKLESS_IDLE
removed.
The test case has been re-enabled on Nios II.
Change-Id: Idd206cb3ca55f2336685a416df18f5848dee09c3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There is no reason to enable tickless idle or system power management
to test the kernel event logger, and it breaks systems which do not
implement tickless idle (like Nios II which lacks a powersave
instruction).
Sleep events are logged on all arches in nano_cpu_idle() or
nano_cpu_atomic_idle() so we get sleep events even without these
configs turned on.
Change-Id: I6db811478686d8b2cd9e12a65b118349e825b22f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I see that the x86 version of the prj.conf file changed.
Merging those changes into the ARC one.
Change-Id: Ifd59d3b7ed71a4e6613bb3d164b901eb1ad7ad55
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Move LOW_BYTE and HIGH_BYTE macros from usb_common.h to
samples code.
Change-Id: I26296bde8c5b3991b3bfab71272c861b5360ce97
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Add support for alternate settings in order to access additional flash areas.
The DFU example uses the alternate settings as an offset into flash.
Change-Id: I636042c7f71a5d2a2778ec7dd5301a622720107d
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
CDC ACM sample class driver implements a virtual UART port.
SET_LINE_CODING, GET_LINE_CODING and SET_CONTROL_LINE_STATE
class requests are supported.
DFU class example does not perform an actual firmware upgrade,
instead it allows the user to upload a file at a predetermined flash
address or to download the content from that flash address.
Change-Id: I702e6727db15ef360d110a70a979c1e4bd4ee1bb
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Periodically reads temperature and prints it on console
Change-Id: I293a7aad88bce245d6c1149fd19fcb7c7e770e54
Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated tags to sensors in testcase.ini inside current_sensing sample.
Change-Id: Id2d5bfcbb1299ed6b1e386f774de46714669bf14
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When profiler is started from shell, platform information is
transmitted over uart by calling uart_poll_out(uart_dev)
directly in the shell fiber context which is executed when
the command is entered ('prof start')
Problem is that 'uart_dev' global variable is set to the UART
console device when prof_flush() first call is done.
Depending on when this call happens (application dependent,
especially in nano-apps which have to call prof_flush in
their main loop), 'prof start' may happen before 'uart_dev'
variable is actually set, which drives to shell fiber crash.
This patches moves sending platform information from shell
fiber to prof_flush function to avoid using non initialized
'uart_dev' variable.
Change-Id: Ie64f4418a745affa3fbd731db6bf9bb998b7c2f9
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
ADC driver sample is now using system log.
Change-Id: I44f5189b3beb09a14d87842c5968127460eda710
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-311
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ip_buf_appdatalen is not set while sending buffer.
Fixes: RTOS-1562
Change-Id: Id423ba5898b9b405d0ca027a74a06a19708841fe
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the prj.conf file, as the driver and Kconfig options for the BMP280
sensor were renamed to BME280 the following commit:
310ed1e sensor: add support for BME280
Change-Id: If3d81d90c269883aa51ff04a12f8fd1aa444a592
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add support for using the MyNewt Bluetooth firmware with the
environmental sensing sample.
Change-Id: I7e5050bc9d1f0edb0df007dd3db4f7e6abd60136
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove erroneous initialization of 'data' via memset.
Set keep alive interval to 0.
Change-Id: I5da4649985efd39b37bbbdc6ae21a856f9e40b13
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add a MQTT interactive shell that can connect, disconnect, subscribe,
publish, read published messages and ping to the MQTT gateway.
Origin: Original
Jira: ZEP-364
Change-Id: Ie85e7b8b9290cb8e80548886aea74a8427b2323b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set CONFIG_IP_BUF_RX_SIZE and CONFIG_IP_BUF_TX_SIZE to 4.
Modify mqtt_publish_read to retrieve topic name and message as strings.
Change printf for printk.
Change-Id: I6746846cb3359096d87dfbb3134d6a3a95bf087e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Display text strings on parallel interfacing HD44780 based
generic LCD controller using GPIO pins to interface with
Arduino Due(SAM3). HD44780 is a popular controller and an
example can help using gpio pins in parallel with it. I
have tested it on JHD20x4 LCD panel for 4Bits & 8Bits
configuration. The code has been made generic so that user
can modify quite a few options.
Datasheets:
http://lcd-linux.sourceforge.net/pdfdocs/hd44780.pdf
Signed-off-by: Milind Deore <tomdeore@gmail.com>
Change-Id: If2809222466b462fa2f4c42b14a514828530f082
This sample shows how to integrate Paho's MQTT Packet Library to create
a MQTT publisher and subscriber application with Zephyr.
Change-Id: I1cb4124386752eef6187a56ccc9f6fd7fe7175a3
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Provide pcap support for echo-apps with PCAP=<filename> option.
For pcap support:
make server NET_IFACE=qemu PCAP=sample.pcap.
without pcap support:
make server NET_IFACE=qemu
Change-Id: Iad90064e0c32134f9c2fda7b28e2cbca1e4e931c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server should work just fine even if the multicast
context cannot be get. By default there are only two contexts
so the multicast would fail always anyway and the program
would not run properly.
Change-Id: Ia9737cbda4a933a208aae020f055f0b6062b4f47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
I2C_MSG_RESTART is not used in QMSI driver. What is really needed
here is I2C_MSG_STOP; Missing this flag is causing the issue.
JIRA: ZEP-398
Change-Id: I8fbfe15890c886ede4cce3d2cc68f53758a41e75
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Demonstrated sequence of flash API calls to show write and erase
operations with the use of flash_write_protection_set API.
Jira: ZEP-383
Change-Id: I36e5b94519dbdf424dcfbcf7f38e5cf6437da7b8
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
On galileo, UART_0 IRQ is incorrectly mapped to IRQ 0
UART_0 IRQ should be mapped to IRQ 17 (same as UART_1 IRQ)
but NS16550 driver doesn't support mapping same IRQ for
different devices.
This is creating crashes when dumping profiler data on UART
CONSOLE (UART_1) with UART console enabled (UART in interrupt
mode)
This patch is disabling UART_0 in sample apps and adding a note
in the README file
This problem appeared due to following commit:
e643cede3a uart: add ISR callback mechanism for UART drivers
Since that commit, UART driver is setting the ISR for all
UART device instances when interrupt mode is enabled
Change-Id: Ic9d0207e5e5c7e3d8e8a8bf90f3132801bc6c2b1
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
On Quark SE, using system timer as event timestamp creates
inconsistencies since the timer is handled by software in
timer_int_handler and tickless_idle_exit. So timestamp does not
reflect timing of certain events like timer IRQ.
This patch introduces the usage of RTC or AON counter as kernel
event logger timestamp
Change-Id: I070254446dd98dd448e119892c34abf12efca719
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Many test configs are the same, remove complexity and duplication by
using just one kernel config where applicable.
This removes the usage of ARCH which is a remnant from the days where
we had to specify the architecture of the board, the architecture is now
part of Kconfig and determined basded on the board configuration.
This will also make it easy adding new architectures to test cases without
having to add an architecture specific config file when it is actually not
needed, for example now that we will enable micro-kernel support on ARC.
Jira: ZEP-238
Change-Id: I143fa3c4629c58329cfeb0c761c7a896fc1ef63a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patches includes
- a profiler file/Makefile that can be added to an application to enable
kernel event logger flush over UART
- a nanokernel and a microkernel sample application permitting to
exercise the profiler
- scripts permitting to get kernel event profiler data over UART
console and post-process this data
Origin: Original
Change-Id: Icacf4354c526c7f780b11371e9c28c87e6461eb8
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Update the zperf app in order to support ipv6.
Change-Id: I137af07bbd739cf4bfe60bd13bdb06cf939c6c55
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
This patch adds the TCP server capability
to zPerf tool.
Change-Id: I8e4d92b10079a7c4b4bddab8d78655031ca6125c
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
* Rename BMP280 to BME280 which is a superset for the former.
* Autodetect device based on chip ID.
* Implement humidity fetching and reading for BME280
* Rename sample BMP280 to BME280
Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The echo-client can now initiate a TCP connection.
Change-Id: I8223ef377127319dd1791497675a4abe8b382365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the active connection to another TCP host fails, then
quit as it is no point continuing.
Change-Id: I21317d7062d4ac93c342834a2503139fe27076e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-client application opens
a TCP socket and starts to send data to server. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side.
Change-Id: I35306b8ecd6794365086a23bf6a17f5103d7ac80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two helper functions to simplify the use case.
Add comments to clarify the use of the networking API.
Change-Id: I60c58296b77d724b7094b90e153b50dfc0b58135
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the symbolic link.
Update the Makefile.
Rename README as README.rst and restructure its content.
Change-Id: Ic74e91749fc0bbf728e528b49e99a87188f84e6d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is useful to have the shell emit the zephyr version number.
Output looks like this:
Zephyr version 1.3.0
shell>
Change-Id: I2608272564a5d2fe39f263c420a897d845457a98
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The application tests polling mode and trigger mode (both data ready and
anymotion triggers).
Origin: Original
Change-Id: Ic0f9400758aaf56ef95f0f3c68c872d1bfd51176
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver and port used are already configured per port, no need
to hardcode the sample to a specific driver.
Change-Id: I8056e35db1e0970ec4ad56ce14fe5654fac9cf3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 7eb9c884bc.
This change causes failures on arduino 101.
Change-Id: I6f8620b629516a6a81c2b417aa3736752ba40873
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- CONFIG_GPIO_DW_0_BITS is not longer available
- Use default printk
- Do not enable debug
- remove useless whitelist in testcase.ini, we already whitelist
boards
Change-Id: If21795d544e268c26a757b697ce3c9f2e56db65f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
None of the configuration directives for any of the arches were
actually needed.
Change-Id: Id0bf7393b8e2c7e0f5188c50c13d7666cdfcd114
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix typos and wrap text to 80 characters.
Change-Id: I25228c1d63ad391c734be601ed1503f42b4f2468
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Use string literal concatenation to break the sample text.
Change-Id: I0729b113e80d3efec909603fbb143d1bc515f165
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This will allow this sample to run on systems with less than 8K SRAM.
Change-Id: Id3a1c826cfade09f91bc3b0dba3c98e386f5ab06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
gpio_set_callback is meant to be deprecated and thus modifying the
sample to use the new GPIO callback API.
Change-Id: I822cd1c81575834d40926c56cd61b87884230594
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set the IPv4 address, netmask and default router addresses
that are used for automatic testing.
Change-Id: Iebddc42c56dceeb089af7878102f8a73c30f0b74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 address is set properly for testing purposes.
Change-Id: I996e7435276f65dbb642aa9ab99c37cd842d4b39
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-server application starts
to listen TCP socket and reply data to caller. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side. The TCP packets might be split into smaller chunks by
echo-client so client would have some unnecessary difficult
to verify the data it sent if we reverse it.
Change-Id: Ic146dfc75825bc8057968c581bfe9d3285e0d7b4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting GPIO samples to use the new callback format.
Change-Id: I944dce4faeeee30117edbd7a065e40caa0b7ed66
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
To show possible usage of the device_busy_xxx() APIs.
Meant to show how drivers and power policy manager can use them.
Change-Id: I49d1dedd9a7b8d6bf09080c6c7243f0666330941
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use same string for driver name used for binding and fix
sample app to work with multiple drivers, not only DW driver.
Change-Id: I4d40aa9d4e83fcf16dc883bb74c3f0e3e30e3502
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also, lower the clock for the SPI bus in order not to hit the DW
controller CS issue.
Change-Id: I69c4211bfa6efb85117185e2ae813dd7c4915a7a
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This app is needed for Arduino101 only, or boards using the Curie
module.
BMI160 interrupt pin is connected to AON GPIO controller. The driver
handling the AON GPIO controller runs on x86 core. Even though, the AON
GPIO controller is accesible to ARC core too, the current implementation
for Designware controller driver does not allow it. Hence, this app will
register a gpio callback and signal the ARC core through IPM.
Other boards that use a gpio pin on the regular GPIO controllers don't
need this app.
Origin: Original
Change-Id: I225ca60735e39c7a47693dc53237f48cd9ac2680
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The movement is needed because on some boards, like Arduino101, the
current GPIO driver implementation does not allow for receiving
interrupts from AON GPIO controller directly on ARC core. Hence, IPM is
needed to relay the interrupts from x86 to arc.
However, other boards that can use a regular GPIO intterupt or users
that connect a BMI160 chip separately, can still use the ARC application
as is.
Change-Id: I58dd77edd45ea2b071db5b99073eb15722847bfe
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Those samples are confusing test suites by not generating
the expected zephyr.bin binary.
Change-Id: I4fb81782bacafb4f259e088df4b2518faa6f47cf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
zperf is a network traffic generator for Zephyr.
Same application is able to work dynamically in client or server mode.
It allows to assess network bandwidth.
zperf is compliant with iperf_2.0.5.
zperf can be run in micro or nano kernel.
Change-Id: Icbd69e1ad56ad29c678b098e7a2e07c44f90e48e
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
Some sample applications are using file naming .config which are
inconsistent from others. Changed them to .conf.
Change-Id: I2ea3944f3809671d4c6f4782dbf77fe9c2a22864
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
It will not build without it. Generalize it then.
Change-Id: I334586f629de1f057e654a13a1c705cd559b44d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Demonstrate the use of SPI flash driver API on Arduino 101 board.
This is a re-submit of a previous merged patch which was reverted
because merge sequence was incorrect (the test app got merged
before the driver).
Origin: Original
Change-Id: I3fce61488ed7d48f400c12448f1c7a01c555661c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
SDK version 0.7.5 has fixed ZEP-62. It is no longer necessary to use
-O0 in order to get correct readings from sensors.
Change-Id: Ia8ac2f55453b7dfdda71fe2f41863cbd0b366739
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The ARC application collects temperature, humidity and pressure data from
a set of sensors connected to the Arduino 101 and sends it to the x86 core
through IPM. The collected data is also displayed on a Grove LCD.
The x86 application exposes the received sensor data as a simple Bluetooth
Environmental Sensing Service.
This version of the sample does not offer notifications when the sensor data
values change.
Change-Id: Iee456d5d2455c7ccb7c5923ef3c94ecb20b5cecb
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_DEBUG_DRIVER provides too low level information to be
useful for samples. Remove it from default settings.
Change-Id: I9d99f9953d4e6b839eeb51ed393e4aed1eeeb01b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array.
Change-Id: Ie8c023de62cda75f7057184555806401f0381a1a
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This extends the pwm_dw sample app to build for
FRDM_K64F board also. Because of this, pwm_dw
has been renamed to pwm.
This allows us to put it through sanity test
to catch build breakage.
Change-Id: Ie4d7442af43ede58f4cec0ec28643384a685321a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary tags to enable building the grove_lcd and
i2c_fujitsu_fram sample apps, so that the Atmel SAM3 I2C driver
will be built to test for build breakage.
Change-Id: I4adfb6336e82a6d407bbd5e9888c27d5f6bc5be1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use SPI_0 by default or SPI_1 if configured differently.
Change-Id: I63f39f63a4b70fded3a7af8061058ba4779e573e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is a temperature and atmospheric pressure chip. The datasheet is
available at:
https://www.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf
Change-Id: I3406eb6c2c4da564757b8315323d0681d648b541
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also enable GPIO and add expected output to the README
Change-Id: I2117d53dc6f90394394c6a8dd9f308a01a110634
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This adds a CTS service sample which can be shared with application
samples.
Change-Id: I38889f71f6ce8fc7b784d0d04af6c97408e2d662
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a BAS service sample which can be shared with application
samples.
Change-Id: I1f484dadf63b41632992454a40edd91077bb78fa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a DIS service sample which can be shared with application
samples.
Change-Id: I66f7a725139c8fa381275c3bda5e7c79fa3f09c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HRS service sample which can be shared with application
samples.
Change-Id: I1d2022ee7a6dfa46e2cae2d7c9d7924140d4fe37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces the amount of duplicated code across sample applications.
Change-Id: I20cf2e9f948f1420f234a58beb7f72ad74696cf8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
An example of button driver.
Change-Id: I8af860058166d7ca5653f50ff585bc9784008f78
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a sample program for blinking with GPIO connected LEDs. The sample
program by assumes the use of Nucleo-64 F103RB development board as the
target and will need to be updated for other platforms. The intention is
that the code will serve as an example of how to use GPIOs in one's
code.
Change-Id: Ia190a7ad5b07181731c9f502d87bd0ef0ba1abde
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Test application to test quark Always-on counter and timer.
This app requires QMSI lib which is not in the repo yet.
See the instruction in readme.txt.
Origin: Original
Change-Id: If75b2714f9b609abc6f7b51c1c0d99d15152399f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch introduces the i2c_stts751 sample application which
illustrates how to use the I2C APIs from Zephyr. The slave device
is the STTS751 sensor which is present in Quark SE devboard. So
no wiring instructions are required in order to get this sample
working.
The application reads the temperature register from STTS751 sensor
and prints the temperature value. This sample is specific to Quark
SE Devboard, but it can be easily extended to support any other
board with the STTS751 sensor.
Change-Id: I9b56aa73645d4741942fc793f1450c6a1c7beb29
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add prj_qemu.conf files for dtls_server and dtls_client. Now
it can be tested between two qemus running 802.15.4 dummy driver.
Change-Id: Id94492f90539025854063662c2f0750a0b9ca845
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This illustrates the usage of the sensor API, using either triggers or
periodic reads from the driver.
Origin: Original
Change-Id: Ief7451fc4771b9459a2b3b7ed0a33341a7710cc3
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The MCP9808 supports threshold triggering. Add support for this feature
in the driver and the sample application.
If triggering is activated, the driver can create its own fiber or use
the system-wide sensor fiber.
Origin: Original
Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The app simply reads the temperature from the connected MCP9808 sensor.
It forces -O0 compile flags, as the default (-Os) triggers a compiler
bug when converting temperature readings.
Origin: Original
Change-Id: I0654543e3d361a862bdf78b44fdc1430cb6aad51
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Move network testing setup from dtls-client to common net_testing.h
file which makes the application much simpler.
Change-Id: I5a727325c22f98170f12620629898e5ed052b707
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move network testing setup from dtls-server to common net_testing.h
file which makes the application much simpler.
Change-Id: Iacd99917cda3efc4cd92d0f48a8cbbc259ef7a84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update CoAP apps project configuration files and also update
according to common net_testing header file.
Change-Id: I09294dfd71e3d0cac980be4ae6d142cc3a59d85c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
User can set the desired number of network packets that are
sent. There is an example config that sends 10000 packets
and then stops the test application.
Change-Id: I5aa9049236f7bebdc9ea9997b9eb1f672c6adcbf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The loopback test application works now and it verifies that
the data sent is the same as data received. This fixes the
issue described in bug ZEP-101.
Change-Id: I1babfab4db9d4df0e769711aa41983366a8b5065
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_DYNAMIC_DB is defined it shall be possible for
the application to register any extra service it needs.
Change-Id: I7186f3faf45e9295e0c8b32dce030099a142c500
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move network testing setup from echo-client to common net_testing.h
file which makes the application much simpler.
Change-Id: Ib1a90b9d87014b7f9adc5f6865ce0fc9faa13422
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move network testing setup from echo-server to common net_testing.h
file which makes the application much simpler.
Change-Id: I6f68826916c870ad7db597d30f20245bada70091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect common routines used in every network sample application
into same file. These routines are used when testing with
qemu and slip.
Change-Id: I02f20b3a9bfa1e886846801b22f43a1d06c59930
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Accourding to the spec the IP Support Service shall be instantiated as
a «Primary Service».
Change-Id: Ief0a2729c2752a33c8e7d4d9fae017c22e969e61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Echo-server and client will exchange data without monitor
tool support.
Change-Id: I3cf73a4baf025bf7e5fc634bef696d5f0e6b4c57
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Migrated from internal repository.
Run "make flash" for each on the same Arduino 101 device.
Origin: Original code, Zephyr "hello world" used as a starting point
Change-Id: I3fdeed6b7e85ad703983c2674e265c85a365ce5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch extends the uart sample so the same functionality (write
buffer, read char then write buffer again) is implemented using
irq-based APIs.
Change-Id: Iefb14dae2b253f90da64ccef8c123619ed494aca
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch reformats philosophers sample to fit in 80 columns
with 8-char tabs. It also fixes other coding style issues
reported by chechpatch.pl script with -f option.
Change-Id: Ie7ed59db4e67e279a26000247a1838221ac37cd3
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This adds indication support for one characterist of the vendor service
so it can be used to test bt_gatt_indicate API.
Change-Id: Ief058c93caf3e30972eca920c050451f6120543b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds an app to get the RGBC values from the APDS9960 sensor,
and drives one APA102C with those values. The app works on the ARC
side of Arduino 101.
Change-Id: Iaee7bd11c06b03cf3c69f8ccb84cdb649634bb6c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Sample implementation of a power manager app that uses the zephyr
power management infrastructure. This app demonstrates use of the
hooks to implement Low Power State and Tickless idle power saving
policies.
Tested on quark_se.
Origin: Original
Change-Id: I10207014f2a844374b4c7a1c0ed50f2fb5c3c440
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This patch adds a very simple UART sample application which demonstrates
how to use the UART APIs. This sample is also useful to quickly verify
if a given UART driver is working properly. For now, the application
tests uart_poll_in() and uart_poll_out() APIs only, but new APIs should
be added in future.
Change-Id: If815f358f11efb058e947291b234d3d4130581d8
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This reverts commit 1b1a9ef845.
This sample was merged by mistake and without the needed drivers
or APIs.
Change-Id: Icf588ed3517e9c2f905d319e6f6f5fff935aa77a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add separate prj_qemu.conf files for qemu_86 board type. Also
remove set_options from Makefile.ipstack which is not required now.
Now build the echo-server with "make server NET_IFACE=qemu" and
echo-client with "make client NET_IFACE=qemu" command options.
Change-Id: I1f3c9c6a198f2b6cae54ae4a5da970b284ef84de
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add bt related qemu flags only when BT is enabled.
Change-Id: Idc611dcf7726829ed77c3f4898abd794a825212f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This enables using dtls_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
dtls-server are actually tested with NETWORKING_WITH_BT.
Change-Id: Ice4f409c8e2d9e97856159482969f6352264864b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ia8ab6898d340967759a8ecbda65c4bcacdc0293e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap-observe-client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap-observe-client are actually tested with NETWORKING_WITH_BT.
Change-Id: I02705f855c1974b065557986f9b231201ba310a7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I80b97d51cb321d84df417f8722e661d944504d4f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I58b286520da0e0e4cba77dd52ea3f64f0268582a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I2080377b4b95e9d973e8c0753ae66dba151372e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should be made clear that this example is specific to the Quark SE
development board.
Change-Id: Ia3e0ec728891eb586bf1461ae9103ce34fd5e24f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The check was wrong and was checking twice for the QMSI version.
Change-Id: I7a73cc6523f141cae0e69b1a51791f6be87cb6de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ib8779a344a1a7ec02f10b0e23a533c78e68343b5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds the wiring information to spi_lsm9ds0 README so this
sample app can also be used in Quark D2000 CRB.
It also fixes the SDA pin from Quark SE Devboard since it was wrong.
Change-Id: I24d4df15186ef111f728a21f137246cf933a8222
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_WDT_DW=y' so we rely on the platform's
default option for the watchdog driver. This way the watchdog sample
application can be built for different platforms without changing
the configuration file.
Change-Id: I4fa0f8e1f34a4608d602b6a5120fa1818b94aa6a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_GPIO_DW=y' and 'CONFIG_GPIO_DW_0=y' so
we rely on the platform's default options for the gpio driver. This
way the gpio sample application can be built for different platforms
without changing the configuration file.
Change-Id: I2480fee5fcd5463c39470c668c4438d83ecb786f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The current value for RTC alarm has been a bit annoying during RTC tests
since we have to wait 10 seconds to verify that the RTC driver is working
properly. So this patch changes the alarm timeout to 1 second.
Change-Id: I2ef2aaeb13a4f53c8ab294ffedc198e8f3ba92a7
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the gpio sample application so it can be used to test
GPIO functionality in Quark D2000 CRB.
Change-Id: I69fed701708a7268e1e5386a9dfde68fe6bb8160
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patches removes 'CONFIG_RTC_DW=y' so we rely on the platform's
default option for the RTC driver. This way the RTC sample application
can be built for different platforms without changing the configuration
file.
Change-Id: I88fc7cc2f072406c9d774a9b4682439df94f3bbc
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the QMSI I2C shim driver so we are able to use it in
Quark D2000 based platforms. The only change required to enable this
driver is an #if guard in i2c_qmsi_init() because the macro QM_I2C_1
is not defined in QMSI headers from Quark D2000.
Since this drivers is now properly tested with Quark D2000, this patch
sets the QMSI driver default options in arch/x86/soc/quark_d2000/Kconfig.
It also adds the wiring information required to test the i2c_lsm9ds0
sample app in the Quark D2000 CRB.
Change-Id: I4be03c09304da5a66ac663e48b1d72225eb5651d
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch adds a new sample application to demonstrate how to use
I2C APIs. The application is very simple. It simply reads the 'WHO
AM I' register from the accelerometer in the LSM9DS0 chip and check
if it matches with the value described in the datasheet.
It also adds a README file which provides the wiring information
required to get the sample application working on Quark SE DevBoard.
Change-Id: I9162c030874c2718506b76519b255c9c11631802
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
User can now say "make BOARD=xxx NET_IFACE=802154" to compile
IEEE 802.15.4 support into the dtls server/client application.
The default is to compile for qemu and use slip.
Change-Id: I87f9b2d766cc5337a9c01c7657fb8d08d2d3e244
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use link local addresses instead of public IPv6 addresses
in the demo applications. This way the application do not
need to do any special setup.
Change-Id: I9aa817c388e3f673a6597801813dd1d0a8feb6b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add spaces after a list of values as required by checkpatch script.
Change-Id: I04bd8af8195e3966fd2b9c36ead49483030eae18
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables using echo_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I1d949798c7a9689ebc2d342ae7342dce32f319e5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I59c6fff1f2d4e950f9ae64adb9f8833ef0fea4d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board is not supported and not available for general public.
Use the Quark SE CRB/Devboard instead.
Change-Id: Id0f8c08bbacb812ef00fe9502b4acecf4f31ffd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the reply for a sent message is not received, then try
to send it once again. If the second resend fails, then mark
the packet as failed.
Change-Id: Ibe9b9384e2e84f055c6486a5bd4d7293675e5d42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to test unicast sending properly, disable multicast
sending temporarily.
Change-Id: If90acf003910a954770caa53825116d2a9ddadc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Combine both nano and micro tests and cleanup whitelisting
for the testcases to include all buildable boards.
Change-Id: I28d41b82fb60d75d4b172d9dd3ac7e71480053b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A template app that defines the power management hooks and
enables the power management related CONFIG flags. This
app will enable build testing of power management code inside
the CONFIG flags.
Change-Id: If26904f69333ff05a0711596218b51b828669de1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Fixed the IPv6 address handling so that CoAP server works
with default settings when IPv6 neighbor discovery is enabled.
Change-Id: Idd0b0df61aaebed43a9c5a408a192add445cacfe
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can now say "make BOARD=xxx NET_IFACE=802154" to compile
IEEE 802.15.4 support into the CoAP server application.
The default is to compile for qemu and use slip.
Change-Id: I2c61ac91d4ae7b2c3611567646028bc751e0419e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Correcting the discovery method for SPI port. The current method is based
upon knowledge of a specific port and a *_DRV_NAME value. Instead this
should be based upon the use of the device_get_binding() for SPI_0.
Change-Id: I250f5dddf2a2e79c4714addf647b0c74bd79ec5a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Consolidate networking tests into 1 directory where possible and put
files under samples/net where possible.
Change-Id: Ieb65e000e1717f4d53058f87e36840a0786d467b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: If26ed436211b40a009f60275ef64bfc9de5da066
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
i2c_quark_se_ss and dw_aio_comparator are just build tests that
enable Kconfig options and do not do anything. We have real samples
for those drivers now.
Change-Id: Ia8c0a1801b967205cc1c116a0887b46a7dc5bbbe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All SoC specific driver tests go to samples/drivers.
Change-Id: Ia9aa2140465320a548504ddb7a44569e2d2af6bd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample goes under samples/nfc directory where we will
have all nfc related samples.
Change-Id: I6e7664d8e0dcbfcb0d9e11e2c7b79d8217665757
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All 'real' sample application now reside under samples/ directly.
the nano and micro variants will be under the specific sample directory
and not split across the file system.
Change-Id: I0ddf929cff7a29749aa4944b4385af058d9cc74c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the test case routines reside under tests.
Change-Id: Iea59a68e8b537954250d63923a88df267639e716
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move aio and i2c driver test cases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I28f24997f147dcd188973555df6024c44f3fb6e8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all kernel testcases to tests/ and change Makefiles
accordingly where applicable.
Change-Id: I130cc3919174e93b7130d55fb101bed1d5d7552d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is now safe to enable sys_thread_busy_wait() for ARM as an earlier
patch has fixed the build system to link against the correct intrinsics
library.
Change-Id: Ib5ed036d996461b91f372b2b3e8f597a925d3292
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables use of ECC from TinyCrypt. Since ECC is heavy this option
is separated from general use of TinyCrypt in SMP code.
Change-Id: Ia550e4a5f89240c8e15d2b5acccc21993b44b471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force restarting advertising until nble is able to handle this by
itself.
Change-Id: Ife811eb69a63b98b3b0380b80e403d5d9dc10f22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to use pseudo random numbers generator provided by
tinycrypt instead of constant using of HCI LE Rand command.
HCI LE Rand commands are used only to initialize and re-seed PRNG.
Using tinycrypt for NRPA increase size of sample shell application
from 86852 to 89700 bytes.
Change-Id: I06e7392d087908caf37cd3ae648ea0bd5cc4ce61
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to focus on demonstrating a simple heartrate service.
Change-Id: Ib59c653ebe356784592c8468767b45c5240ec67a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tests take a very long time to complete, add a directive in
testcase.ini to mark them as such. Unless --enable-slow is passed
on the command line, these tests are not executed, only compiled.
app_kernel and test_sha256 marked as slow test cases. It appears
test_sha256 was being skipped earlier due to platform_whitelist line
which has been removed; the test should be able to run on all
microkernel-supporting boards. Same with test_aes, which completes
very quickly and is not marked as 'slow'.
Change-Id: I39ec8212f3fa10122ff786c10b6659d22bae64e3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There can only be one instance of an ADC, but we have code setup for
multiple.
Change-Id: I94eae2450bdc6b138ebad66f80a7c451cefe32a9
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
It was, in a nutshell, wrong. Fortunately, the incorrectly
specified fields weren't being used by anything.
Change-Id: I0fa63fa16a267502744a7a2c82865c7de8b5446e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary functions to enable the tickless idle test
for Atmel SAM3 family processor.
Change-Id: I19e2a8c898dbbc687c980d06bb6c19de693b97a4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On x86, IPM is not enabled for footprint min benchmark. Extends this
to ARC too.
Change-Id: I099fc00c9f8ee086118c63523ad28afd6c991732
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We have a new policy: users should not be able to configure
an interrupt with "forbidden" priority levels, and any priority
levels with special semantics will be activated by flags.
Change-Id: I757c19cfedcb1d0938eaf4da348ddafb71b3e001
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
W25Q80BL is the SPI flash chip soldered on the Quark SE development
board, for communicating with it, having support for using GPIO as Chip
Select is necessary, so it will be useful when testing that feature.
Change-Id: Idbf571cdb3b1ae8704d7a932bc0ac56dc53f8ff1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Depending on the driver implementation, the name of the device will be
different.
Change-Id: I35395abe44727b39d930e4c123860fad7b13edfd
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For this demo app, set the 2001:db8::/64 address in routing
table. This way we will be able to pass data using these
addresses. Something like this should not be done in real
networking environment.
Change-Id: I1764d5ae09ab95dd580c6b48d6f368bfe283a6a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client will timeout the packet receive after 5 seconds.
This way we at least send something instead of waiting forever
if the packet is lost.
Change-Id: Idc332965786797df4ed04dc8b3ef49af32a3f436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The echo-server uses only one code base for both microkernel
and nanokernel.
Change-Id: I7abdf76dc13c31e4f91d0fd9d3b870ffe20ac71b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client uses only one code base for both microkernel
and nanokernel.
Change-Id: Ieaf9a969319537286181ba333e3a05bfa0e9363a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-client does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I0608b6172bdd044dd49dedf86477ef8a31391a23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Address configurations for different Kconfig options is difficult
to test under different environments. Make it simple at the moment.
Change-Id: I689649b11b4ccb1cf1ff0e90720fa03b6dc3656b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify echo-client to send packet after packet received from
server and wait unlimited ticks. Current behaviour flood messages
to server irrespective of reception at server end. Modified
behavior only for nanokernel at the moment.
Change-Id: I6aa20c5b9fc9d6d1cf8f996e90735f5d2b986e5a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server and echo-client samples did not compile correctly
if one wanted them to work correctly using "make server" and
"make client" commands.
Change-Id: I955c6cc23c3192fcb1dfcfbda7df53050a71501f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove float option from 'max' configuration and add a new
'float' test for hardware that supports floating point.
Move configuration files into directories to ease maintenance.
Change-Id: Ibf4c88ea946a78b8025bc61409b0ab661250f4fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default number of IRQs is good enough for this sample.
Change-Id: I00f2088b4c82d60717563e36ebccfecac3983522
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This application reads the 'WHO AM I' register from a LSM9DS0
sensor connected over SPI.
Change-Id: I7b0631e9bc783aea60fdb489f40058e0c15275fb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test builds the syncronisation app using the following config
options to verify if the build is successful:
- CONFIG_DEBUG
- CONFIG_NEWLIB_LIBC
Change-Id: Idf2fe948ab58982244b3590da938a83206103be3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds code to the gpio sample apps to run on Arduino due,
using the gpio_atmel_sam3 driver.
Change-Id: Ida16ceeabf55eb7efedc94c56ff875d8fad6456d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the gpio_dw sample app to gpio, as this can be used
for multiple drivers.
Change-Id: I6f21237b5b8df10f531e47ad9f75cadfd619cd34
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test works for ARM, but not testing sys_mem_safe_write_to_text_section()
since base ARM image are XIP images.
This test could be enhanced to boot a secondary non-XIP image for ARM
to test writing to .text.
Change-Id: I56aef68afabe88588b61c273901491de0c24a39b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
A dummy test to verify SPI driver and API build properly.
Change-Id: Icb1ab282b4a0fa02ec949c96becdfdc16f20bc2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Sample application now pulls data continuously.
- Adds information on the arduino analog input pins and ADC channels.
- CHANNEL is defined as a macro.
- BUFFER_SIZE is defined as a macro.
- Sets the sample to run on repetitive mode on ARC architectures
(applies to Arduino 101 ADC).
Change-Id: I6201fea3a98b5394c05eb3ac570793629431ac02
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Quark SE SS provides 2 valid GPIO controllers, thus enabling the built
test case for it.
Change-Id: I46c6ceb3d4fe78a87c095e24851d289720524a9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a sample app to interface with TI INA219 power monitor.
The values used in the app are for use on Adafruit's breakout board
(https://www.adafruit.com/products/904).
This assumes the slave address is 0x40, where A0 and A1 are all
tied to ground.
Change-Id: I4116629171a98be6f2b9aa422dd3eb386b4d59c2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
nble sample is a copy of peripheral sample which now has support for
testing nble driver so a dedicated application just for that is no
longer needed.
Change-Id: Ia8ea2262fc2472a54c81b90eb86d9c0d4b12f42d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These commmands don't have to return ATT error code, because
status BTP status is sufficient.
Change-Id: I5405bfbc0ad6fbac46eb3dab1ee63d3e18bf38fc
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds implementation of handlers for Configure Notifications
and Configure Notifications BTP commands.
Change-Id: I92c40836c09e145ea405226f321dd752ac16fc9f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds noifications and indications commands and event
related structure defines to the tester application.
Change-Id: I532ab6471d2e7671213bfa526e7261308dd4b2f6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enable seems to be more appropriate than Toggle.
Change-Id: I69ef509c47ddd7b76bc16684af60821328a7c647
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adjust printing bluetooth address in auth_cancel() user callback.
Change-Id: Ic39eeac36394d73eaee27c04bcad17e32704bbe7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
_next member, as the name suggest, is internal and shall not be used by
application directly instead application must use bt_gatt_attr_next.
Change-Id: I7c137eae555475d024098cd14a54d965cb397eae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Let us know that bt_enable() is successful.
Change-Id: I70581d950a9a922e809804bacfbfa039b2fec2fe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disabling ARC core allows to flash only lakemont and decrease unneeded
debug output.
Change-Id: Ifb913274302d7c69f1fb9c2e1747742d7a810627
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Test Nordic BLE on platforms which has support for it, at least we
need a UART configured to be connected to the chip.
Change-Id: I040fbb33436ae6bf973b521d52bf7b971993559a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed for GATT Server tests to implement larger attribute
databases.
Change-Id: Id160ac81b3e393697bdacd3e19033e9ff7c10fde
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses proper bluetooth address during printing to standard output
when monitors connected, disconnected and security changed states
based on established connection transport type.
Change-Id: I87b54ee619c329ffa645bfbb5e453cf673b93181
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Emulation is not supported on basic_minuteia, only qemu_86
supports emulation.
Change-Id: Id1adc6db02aa22c86207db77fb16ac7548e09dac
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove architecture config files and have just one, they are the same
now.
Change-Id: I6d719d5409569ae8e741fce20e90e16efa701385
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces the 'QMSI RTC device driver' which is simply a shim
driver based on RTC driver provided by QMSI BSP.
Some config options are independent of the driver implementation used,
so use a consistent name for them. In this case RTC Interrupt number and
Priority use the same config options for both the QMSI and DesignWare
drivers.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_RTC=y
CONFIG_RTC_QMSI=y
Change-Id: I48292406e5472e5786f3b9abbeb71016a273bfec
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uart.h may include pci/pci.h, so add drivers/ to the include search
path.
Change-Id: Ic48a88c97c45e805ee7aec1df884cdb60d6fa33a
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
This adds the config file for x86 based platforms.
Also, it no longer clears the screen at each counter update,
as the app is writing the same amount of characters anyway.
This gets rid of the screen flickering.
Change-Id: I1db6dd4b7978b764b7538e120354fc5d010df283
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the i2c_fujitsu_fram sample app to do multi-bytes.
Change-Id: I20ea0e08c340cf94158ad521c27d5315e522b6de
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the config file to build for x86-based platforms.
Change-Id: I42c32966507ba822726834a200edd079c90cc96b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updated board to arduino_101 and updated nanokernel_objects.c
NANO_CPU_INT_REGISTER macro args.
Change-Id: I5281a84138ef031ae82cdd80ab617f94b3f712af
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Sanity test is disabling the ADC controller before doing a read.
Change-Id: I275a94244a13e80c12e6b39267c4a25dd5479002
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of a switch statement use an if statement which is more
compact and readable.
Change-Id: Ie2cd703eef582b129d81331b4bbcee5e0eba2479
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those applications don't require active scan to be performed.
Change-Id: I7c4b52ab8aaa700ab4fea4e2b19a66d182f799b6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Included Services Found can be of type either Primary or Secondary.
Tester shall know the type of service discovered.
Change-Id: Ia78e0c76236bb0ce295a91c6617aa9eafdfcf60b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds missing Type parameter in the Notification/Indication
Received event. This parameter specifies if the IUT received Notification
or Indication.
Change-Id: Ia9f4fbf6ede99c72d6c7bddb87f1aeb3b8b97600
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds extends BTP with commands to register for characteristic
value indications and notifications. These commands require CCC handle
parameter taken from PTS in the MMI.
Change-Id: Ie97c85c47590c0e29c5d8cb65cefe5f022f79f47
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no point in trying to connect non connectable device.
Change-Id: I1e3d8486db7cd7ca80f226ec3f4c36ab43f14a1a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This application only connects and disconnects to found devices.
Change-Id: Ic4d5cde52da37a369aa0583ec774c4dd116c6c6e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes sure discovery UUID is a static variable so that it remain
valid once the scope changes.
Change-Id: Iaca9ab5d71f51e526dcd8439795e962bb359f9b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The main purpose of sample app is testing H5 driver and catching
checkpatch build issues with H5 enabled.
Change-Id: Ia02cdcb38fc8f836de0e5f87b1afe428f7021673
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds very simple peripheral application that supports
Device Information Service only and doesn't support pairing.
Change-Id: Iaec1317a8894db11388408d3f65af8a38d1618c3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Multiple Characteristic Values command handler
to the tester. It allows to test if GATT Client can read multiple
values from a GATT Server.
Change-Id: I994ffac73eb8e6c0a7696dc41304efd9f01c35a4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Long Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client writes long values properly.
Change-Id: I788707b0a043ecad6be32d9e1f8d536765ebf41a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client performs write
operation properly.
Change-Id: I3afe167c7ca2789df7d288bbc06ffc8479240da8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Long Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can read long value from
a GATT Server.
Change-Id: I1c2060f7ecd45ca18ed5f9e0747121236b283631
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Read Characteristic Value/Descriptor command handler
to the tester. It allows to test if GATT Client can perform read
attribute value from a GATT Server.
Change-Id: If95b8d2d3a5a62048bb6371ae80b2834c20d88e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Signed Write Without Response command handler to the tester.
It allows to test if GATT Client can perform signed write operation without
acknowledgement form Server.
Change-Id: I14757e6a52abf87bed68103b2e6fbff200fb6bb8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Write Without Response command handler to the tester.
It allows to test if GATT Client can perform write operation without
acknowledgement form Server.
Change-Id: I3663e2e01c0fabfd75e4bedab0955700e3003522
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristic Descriptors command handler
to the tester. It allows to test if GATT Client can perform discovery of
characteristic descriptors within specified range.
Change-Id: Ieb04b47168249d8d76eab840b4f54b8b6b450792
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Characteristics by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of characteristics based on known UUID.
Change-Id: Iab78ea7e5bc85e1fadc46b7e8f5b28ee4b9db16d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover All Characteristics command handler to the tester.
It allows to test if GATT Client can perform discovery of all
characteristics contained within specified range.
Change-Id: Ib70abaf1365fe4a73757507148723e66881b01de
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Find Included Services command handler to the tester.
It allows to test if GATT Client can perform relationship discovery.
Change-Id: I76c12fcd5e79d906b4e29b926a82a2022e505c40
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds Discover Primary Services by UUID command handler
to the tester. It allows to test if GATT Client can perform discovery
of primary services based on known service UUID.
Change-Id: If5788c6f23481c7b4af85834bf8b113a97a4b66d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of passkey entry command in tester
application.
Change-Id: I0624ee9f899102284490a82f5bb0a68bb342640a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of pair command in tester application.
Change-Id: I55545bdf99e2828c17ec716069e925940f15d019
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds implementation of setting io capabilities command in tester
application.
Change-Id: I21ae68633fb74d78db6e5622e1ee518ef0eed632
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds stubs for SM commands defined in GAP.
Change-Id: I5aef256ade5a100eb0a582c5d9bd5eb8d01611f2
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch separates helper for converting address type to btp
specific.
Change-Id: Ied723e01f5548b10e063a6771f8824c0c35b4682
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch removes redundant tester_rsp_full public function with
wrapped tester_send function.
Change-Id: Iba517ed194e02045ca952b00b952c7608592fbbd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
BTP Client received success response from the tester application too early,
so that next command was blocked due to pending ATT Request
Change-Id: I598c0e9e90984cac07f8b4ea265b0d6d69d3d18d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The basic is the same for both architecture, but using different
GPIO controller and pins.
Change-Id: Ie021461858736d90a47bdef2c9d5e655e2efa473
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Excluded from quark_se_ss due to insufficient RAM.
Change-Id: I75bb34c058c7c41d4f3baaf12ca110f23eb531b8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses too much RAM to run on Quark SE, but we now can at least
build it for generic_arc.
Change-Id: Ibdc144303d9d9c2049e4d5d4ec637b1e4778f392
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a sample app to utilize GPIOs on x86 side of
Arduino 101. Refer to the header of source file for
more information.
Change-Id: Ie547618b2c4fb483d85d6458bd68dd2849e1d19d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app which displays an incrementing
counter through the Grove LCD, with changing backlight.
Please refer to the README file on how to setup
the hardware.
Change-Id: I95c0571edaeabb281ee06f3b32fad1ab5b64d924
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize the Fujitsu
MB85RC256V FRAM via I2C on Arduino 101. It does
simple read and write on the chip.
Change-Id: Ie20470f3701acb0e4fa9bc3d7b3676625839cf06
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_fifo's file header to be doxygen compliant.
Change-Id: I1b37c0cdb08c6ceecc4b18c32b5ab9e91dd202c8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_mutex's file header to be doxygen compliant.
Change-Id: I5c5edfb70fa0cf4c6664bc21ce3869b1c22a4e71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_map's file header to be doxygen compliant.
Change-Id: Id0d90e893883756c91bb5de3c2f5fdc20f40dc6b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_sema's file header to be doxygen compliant.
Change-Id: Ia5945a64ae597239c9f5ff9ca14231625b9cb467
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_pipe file header to be doxygen compliant.
Change-Id: I6761fb5078c08d9968482baba47758e0bc3fd0d9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_events' file header to be doxygen compliant.
Change-Id: I75f0fafbe7c7b81abda1db94fea3194962a446ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_mail file header to be doxygen compliant.
Change-Id: I890eeb8bfd2ac5ea16d06ad2f4ec0bbb00a77d79
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add a build test for the dw_aio_comparator driver to catch any compilation
issue.
Change-Id: Id9c8e49656f1fd5843183fdd2cd0eb8d53fc8c8a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build test for the i2c_quark_se_ss driver to catch any compilation
issue.
Change-Id: Id7342c07f3630252a9a06b4afde9eea8f423287d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
clflush and mfence are not supported on `iamcu'
Change-Id: I25b7c582de3b8e2bbea3f219d4655c16763410f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add command for choosing the default connection.
Change-Id: Id100320f31cb0e99ab48b162b466f52f6273018a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current MTU size was not sufficient to test GATT Client, where lower
tester requires to send data of length 512 +opcode +BT address.
This exceeds current BTP_MTU size.
Change-Id: I090c47975ecfe9a657d6ff1158b5dc764c8a78a1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Both places in the central app that enable scanning should do
duplicate filtering.
Change-Id: If7086667c78878355dc246aa3d0b5ebcbdd0ac7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_br_* is equally understandable and the same length as the
corresponding bt_le_* prefix on the LE side.
Change-Id: I1820f9b9fab6363b696072f6b70d57c0bc780078
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data length was incorrect which caused the name to be truncated.
Change-Id: Ieaca7745fff89f0f5689b6d15bfc0386f59add47
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For test purpose pass NULL to bt_enable so it blocks until init
sequence is complete.
Change-Id: I875ff9a59bb3d1d2e799db6fc967da3aee3ac77a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Passkey should be entered with leading zeros so print them to avoid
user confusion. Due to printk limitation (no support for padding or
precision operators for decimal numbers) snprintf is used for
convertion.
Change-Id: I6e01f577c935147ec91038b6dce115fcd893ac99
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For testing IPSP application against a Linux host it currently need some
extra steps since 6LowPAN is not enabled by default.
Change-Id: Id491e31ef9ad6eebca7497705e874c01a5493589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application uses Bluetooth IP driver to listen to UPD port and
echo back the data received.
Change-Id: Id8e58f5f8bf58ff5947441cbcb3131c0da27081c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds structure definitions for SM related commands and
events. Structs are mapped with btp specification and will be used
within commands and events implementation.
Change-Id: I82231cdab62d170b86c548acc14ffdcbd888473a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Those are debug feature and were enabled by mistake.
Change-Id: Id49078fd4b910578af35dbe8660d148a691a4f13
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tests errno is retrieved per-thread with fibers and one task.
Change-Id: I0b0890f250a80a30806dc1294944aa42f4209ace
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: I1c225c1b68d94b22ca10423b50a78a0ba09a27a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: Idcc89e6e9f4acc337fafc7d42f8de3061a5ece04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a configuration that does not enable SSE and FLOAT to be used
with Quark systems.
Change-Id: I140d76893292bb9b0cef7c5a06acfd39529fe9ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since all the necessary bits utilizing UART by index have moved to
use device name instead, the uart_devs[] can finally be removed.
Change-Id: Idbae6b46c0af9eef6c22c59e121e9d6a6b52426a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With MVIC these can't be arbitrarily assigned and the vector must be
<irq num> + 0x20.
The correct number of vectors is now set for footprint-min on D2000.
Change-Id: Ibf59921dbc438c7465b7050dd74d0badc9a91fc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move btshell.h out of samples into include/misc and rename to shell.h
Move btshell.c into driver/console and rename to console_handler_shell.c
as an shell implementation based on new config
CONFIG_CONSOLE_HANDLER_SHELL.
Add shell_register_app_cmd_handler for an to app to optionally call so
that it can receive cmdlines not handled by the cmds registered with
shell_init
Change-Id: I5c1585e62ff7a0ee923c6c92833cc762cf912bad
Signed-off-by: Thomas Heeley <thomas.heeley@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample creates an alarm and repeats the alarm on every
interrupt.
Change-Id: I97583e3c5af826c51536f8d244c016e2c628e88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Software interrupts or system calls aren't really appropriate for
zephyr, but we have an ongoing need in our test code to run a
function with arguments synchronously in interrupt context.
This patch introduces irq_offload() which allows us to do this without
separate initialization or having to manage fake IRQs in the
interrupt controller.
ARM assembly code contributed by Benjamin Walsh
<benjamin.walsh@windriver.com>
ARC is not yet implemented but will be in a subsequent patch.
irq_test_common.h has been removed and all test cases updated to
use the new API.
Change-Id: I9af99ed31b62bc7eb340e32cf65e3d11354d1ec7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replaces calls to task_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3a41cd2fd185680d4c1deb2c07ffb82647211fc2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replace calls to nano_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3ed2589489d4de3e79cab085122e95dabafe8915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sample suffix is redundant, since we are under samples.
Change-Id: Ifb59007f0c1b156c7bb306506e3b22efc9b993dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following cruft from the nanokernel version of the kernel
event logger sample application:
1. MDEF file
This file is only relevant to microkernel projects.
2. References to advanced power management and tickless idle
These features are only relevant to microkernel projects
Change-Id: Ice9bbf0a3d73c45a9157bd38e0a2703f5915d51d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling connect command in tester
application.
Change-Id: Ia35bcb33caf59b8df4a3cdc01c12d58fdeeecfe9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to display passkey and confirm if it matches remote
device.
Change-Id: I22f706b6441210ef426702ec290a05112e06a4e2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Because of the way the loopback tester works, it needs much
bigger stack when sending packets in TX fiber.
Change-Id: I360f0cf1f35e654cb139565f19f24628fb5ab5ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove testcase.ini from net/test/test_15_4 from microkernel
version temporarily.
Change-Id: I1ee5d80142c6b2210629842e5e8d83370299657d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds missing connection unref in disconnect command. Also
lightly status setting was refactored.
Change-Id: Ic2502d8df15e45c4aea25632642af3d8a4fb23cc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds missing packed attribute to structures.
Change-Id: I9bcc8a677ae296e41eebb530584977660df52ebf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch extends Bluetooth Testing Protocol with commands used
while testing IUT as GATT client.
Commands are mapped to the procedures from Core Specification to make
use of Read Supported Commands command. Based on the response to this
command tester can determine which PTS test cases should be enabled.
If the IUT don't support eg. Reliable Writes, this command won't be
set in Read Supported Commands response, so that test cases that
test this functionality won't be executed.
Change-Id: I204a295698d4b69f73d0556b172770c4fd018009
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffer size is 512, so uint16 type shall be used to store it's length.
Change-Id: I5abaf7d783032ff41819f7b838d4016932dece20
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch separates helper for converting uuid received from btp
command to bt_uuid.
Change-Id: If7f5423a839379763928ba5e87678697b1721d83
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
IUT shall response with Invalid Offset ATT error code, if it exceeds
value length.
Change-Id: I5c7148c96324482f198332d475742bfb44274957
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The least significant bit of opcode is not used to distinguish between
command/response or events.
Change-Id: Icaa1b6d87968e095a7f231d43e74257f5acca379
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Add configuration files for new platform and adapt options
of the benchmarks for those platforms.
Change-Id: I7c5011966c3a99f0b1c2c3fc44ba05b67ac6f953
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test requires a huge stack and wont fit on Quark SE.
Generated binary is too large due to a large stack size defined.
Change-Id: I3446d614a58db1ab78941799ee41e898368db3b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample depends on functions that are not available in
the MVIC driver.
Disabling while we wait for those to be implemented.
Change-Id: Icd03ef014cbcd890945c0e77e349cccfded62e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow tests to be built for this platform.
Change-Id: I2275ec71af6cdb6f71c131fa26c5eae2d91c2475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Prevents unnecessary features from bloating the size of the galileo's
minimal footprint benchmark project.
Change-Id: Ie689a2c6fe1409904c43ec9a24a0efc01e768e4c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
task_event_handler_set() only does event ID validation using __ASSERT(),
which cannot be easily tested automatically.
Change-Id: I060e3aa5b31f0a312e328e89db6f20cd800e9c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
ip_buf_appdatalen should be user_data->expecting otherwise
it is zero.
Change-Id: Iedb61a7f0e3516a5643da04b5963a2e241fd8bc9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Change the init function name to have client string in it,
it is more logical that way.
Change-Id: Ie282151562620858dc78563f2a4e63f7fb4fc472
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There's no reason to depend on this config option, in fact it looks
like it doesn't even exist.
Change-Id: I3e072466700ca7115dfde5af09b08f98707062bb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Fix the include paths in Contiki sources so that we do not
have to create links to include directories during compilation.
Change-Id: I9316f1e90474e0ee563557deadd0bdc321cbb0fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This command will be used to add a descriptor to attributes database.
>> send 2 4 0 02000302cccc
Received: hdr: header(svc_id='\x02', op='\x04', ctrl_index='\x00',
data_len=2)
Received data (hex): 04 00
Received data (ascii): ('\x04\x00',)
> ACL Data RX: Handle 64 flags 0x02 dlen 9
ATT: Find Information Request (0x04) len 4
Handle range: 0x0004-0x0004
< ACL Data TX: Handle 64 flags 0x00 dlen 10
ATT: Find Information Response (0x05) len 5
Format: UUID-16 (0x01)
Handle: 0x0004
UUID: Unknown (0xcccc)
Change-Id: I64b77ce735e2dff10ae15290fb174b7f99876014
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This command is used by the tester to include service.
Service that is going to be included has to be already present
in the gatt database.
> ACL Data RX: Handle 64 flags 0x02 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 14
ATT: Read By Type Response (0x09) len 9
Attribute data length: 8
Attribute data list: 1 entry
Handle: 0x0007
Value: 01000500aaaa
Change-Id: I12e1790be946c3cf10105c66a852da1cb23cf4bd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch changes the way the attributes are added to the database.
From now, attributes will be registered one by one in gatt_db_add function.
This change is needed, because the handle of the attribute is assigned
in bt_gatt_register, and the tester application has to respond to the
command with valid attribute handles.
Moreover, Set Value command rely on the attribute handle, based on which
it looks for an attribute with handle spacified by tester to set it's
value.
Change-Id: I1f251f9bd5579bde2a52ebe3f1997da49c1b1721
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This will be needed to pass tests that require Insufficient Encryption
Key Size error response.
Change-Id: Ie358686d3a9843527e0c3dbd3918daed4e4d2f4c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The same opcode was used to Device Connected event.
Change-Id: I51640ed81822311817e82e43998c476795a28d49
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disconnect command is special since it is also used for cancelling
outgoing connection. Due to this is might be called with default_conn
set to NULL. To avoid conditional unref always pick extra reference
from default_conn for local use.
Change-Id: I59ad583becbf39a71366069d0307aa44f2c64174
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit fixes the nanokernel sample of the kernel event logger
that shows the event messages for context switch and interrupt events.
Change-Id: I4e972adb06b81f2f548bbabe8cd6577af633001c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
exclude Minute-IA platforms from tests that enable CONFIG_FLOAT.
Change-Id: Id186857403cb73d009b6e9e126c4e240f95dbf1a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test can only be executed on x86.
Change-Id: I4fe60dbee9dcb11f983855b507f53c2b9fbb54d0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Revises microkernel semaphore sub-system to allow ISRs and fibers
to give a semaphore without having to define a command packet set.
The microkernel server now supports a 3rd command type on its
command stack, allowing a semaphore to be given in a similar manner
to the one used for the existing "give event" command type.
Change-Id: Ibd7fb1a77949792f72acd20a9ee304d6eabd62f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
These tests ensure the functions manipulate data as expected.
They do not currently test atomicity.
Change-Id: I3646b3a55ffb895c56dbb0d0bc39da5e1138e7a5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This simplify the handling quite a bit while the application can still
prevent the buffer to be freed by referencing it if necessary.
Change-Id: I5ed0e96e8d9e349b79ba31ba9568af61181e1065
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The test causes random failure so remove it temporarily.
Change-Id: I0b74877ad27d673099d0eecb191b6978bf9b40ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Buffer received over L2CAP dynamic channels needs to be unref by the
application once they are done with it.
Change-Id: If210be1c538cf0b550dd03094d007b6851cdfbf4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/microkernel/apps
directory.
Change-Id: Ic89d4616a28b4079f90351938f9798c7bf61ce05
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/nanokernel/apps
directory.
Change-Id: I5684f569f75aa0a9d66128cf786e60ced79fbaf0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples directory.
Change-Id: I0ca0188c6844b0957270398d08b85a3153819e97
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add sanity test related changes to test_15_4 application in both
micro and nano kernel. config_whitelist in testcase.ini is not
accepting other than PLATFORM configs. So creating test folder
for sanity tests. src directory is still common for all.
Change-Id: Iffa4c588500367fa475aef8e0772f1c08946c5a4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for CONFIG_NET_15_4_LOOPBACK_NUM in test_15_4 application.
Change-Id: I57246f9db587f492cddc0d0be607b1ae4a78fbf7
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to build sanity for both ARM and x86 archs.
Only supported platforms are enabled.
Change-Id: I499dbdee7b9df265affb2bba98b5bb100339fe18
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tester application requires 3 UARTs and currently no x86 based
platform supports it. For convenience default to arch that allows
to run, not only build tester.
Change-Id: I086e72a580f56d94181a6d6eada7693ddd24dec1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I98a0720483d3f364b77fe6dc030c9169aa4ade67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I4eb6cea592cce99dcc9e4c1b1219ebbf89eddd04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to have a generic buffer API in order to efficiently transfer
data between different subsystems. The first such case will be the
Networking and Bluetooth subsystems where 6LoWPAN data will be passed
back and forth.
The needed API needs to provide enough flexibility for different
buffer sizes as well as custom protocol-specific context data.
The implementation offered in this patch follows the general design of
the existing Networking and Bluetooth buffer implementations by using
a backing array of buffer which is fed into a "free buffers" FIFO for
management. The main difference is that the API allows specifying
variable sized buffers for each created pool, as well as a minimum
amount of "user data" that's allocated as part of each buffer.
There's also an optional destroy callback that's e.g. useful for HCI
flow control in Bluetooth (for notifying the controller of available
buffers).
Change-Id: I00b7007135a0ff35219f38f48658f31728fbb7ca
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently it is only possible to build the tester for arm.
Change-Id: I7fd530ca09bfa41072420da774fba3b48a5d5a90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds a NET_INTF makefile configuration option to the
echo_server sample application to allow Ethernet support to be enabled
by specifying NET_INTF=ethernet. It currently includes specific
support for the Ethernet device in the Intel Galileo.
Change-Id: I6b605db32d2d8a4259fc003724b2daa11c9a26d9
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the attribute value is going to be changed by the upper tester,
(eg. to issue notification) for simplicity it can be stored in the
place of old one.
Change-Id: I03a6ebbda5d75e6ffa9c2fd6b3c0eab495623a11
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set discoverable command is used to set the discoverable flags
in advertisement data.
Change-Id: If46a5e05379c5f589afb1658a7b275a82c52e4e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds an option to enable L2CAP dynamic channel support, fixed
channels are not affected by it.
Change-Id: If36bece46b7b94142ea1ac976b878d1b5ae6a578
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap-register can be used to register a server:
btshell> l2cap-register 0x0080
bt: bt_l2cap_server_register (0x0011110c): PSM 0x0080
Change-Id: I2c2d9a4cba70b0cddaf352830659d206b609ee63
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
an ifdef was removed leaving the endif in place, this restores
the origin ifdef.
Change-Id: Ibc4863e3d09c1c09525276ca8ae4aa9e52fbd568
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup header inclusion and only include zephyr.h in samples
and applications.
Change-Id: If7460f4c6305a1c1cfcfdcf6a9bb7423f410c5c6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the 'gen_idt' tool to generate a mapping of IRQ numbers to
interrupt vector IDs, thereby allowing the IRQ priority to be utilized
when statically connecting an interrupt.
Change-Id: I2e54ceb65145682820dfbd8ca1ee6ec68d71ce1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I2f28a4dd2b1b372905638cbccdf987396999d7ec
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With this patch device name obtained from advertising packets
will be printed out.
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 0,
RSSI -83 AppleLETester
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 4,
RSSI -82
[DEVICE]: 00:A0:50:00:00:08 (public), AD evt type 0,
RSSI -80 BLE Keyboard
Change-Id: Ic5116bce958d5b4479d481c40b2658ab56ecb819
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes attributes discovery more easier from the point
of shell application user.
UUIDs of discovered attribute declarations are now printed.
For services handle range is shown.
btshell> gatt-discover-primary 1800
btshell> Service 1800 found: start handle 00000001, end_handle 0000000b
Characteristic properties are parsed to string and printed
with characteristic value handle.
Characteristic f000ffc1-0451-4000-b000-000000000000 found: handle 0000006a,
value_handle 0000006b
Properties: [write][write w/w rsp][notify]
Change-Id: I6823fa562206ccf336dc301ee71bc4a02cecc14f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Advertising type is already configured based on current settings.
Change-Id: I4b47237c9ea7c48eab05786f01b38ebe3250141a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
To allow the remote central to pair and encrypt the link.
IO capabilities are set to DisplayOnly.
Change-Id: I46459539f1b882952d29ee5eb8d17766715de4b8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We had two attributes stored with the same handle.
Change-Id: Ib24912578b958d428d6b3da3c2f73994691622bb
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
BTP protocol specifies value length to be 2 octets value,
so uint16_t has to be used to store this length.
Change-Id: I2a911910475db305a0ff1f9ab70866d24aa47158
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Reworks the internal design of a command packet set so that
the command packet array is split out into a separate variable
lying in uninitialized memory. This shrinks the command packet's
data section footprint to almost nothing.
Note: A side effect of this change is that it is no longer possible
to define a command packet set as a "static" variable since the
CMD_PKT_SET_INSTANCE() macro now generates two variables.
Change-Id: I9c7ebe637edf879758589ff4a26ace1303790bf7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This test fails with exception debug enabled. Make sanity pass again
while we debug this issue.
Change-Id: I0df279d2ec2f8fb29c30d25ec0d05da18e929964
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds two new fields to the ISR_LIST structure (irq and priority) to allow
the decoupling of the vector ID and priority from the IRQ number at some
future time.
As a result of the addition of these two new fields, the gen_idt tool is
modified to both process these new fields as well as validate them.
Change-Id: I343dac68d99c78168a25b19784140f85d5db7578
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The galileo minimal footprint project requires at least 53 IDT entries
to accommodate the HPET. This is due to the current algorithm used to
map an IRQ number to an interrupt vector.
Interrupt vector = IRQ number + 0x20
Change-Id: I6de2cd72da631af04237615082823e7de65d8b22
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enhances the existing nanokernel context test application to
validate busy waiting.
Change-Id: I08cd74f74ed596f0baa30d879e1d98000b1d4c85
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test takes too long to run, do not run it on multiple
platforms of the same architecture.
Change-Id: I3f121cfd22b99f3910fcbb9ef45a53b0abf79360
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently useful only for Galileo.
Change-Id: I8d4fafd530e11a50f91cedd0de1691393f270b9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: Ic79978da286f9c288868074a69262d89488925b8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Bad things happen if an SW IRQ is asserted before it is initialized.
Change-Id: I4ad48480c4d7bb5fc14d778d2566d73086300fa1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit breaks the sanitychecks
This reverts commit 93fa1053b21efe3d030ea060a31b80d6008d5bfd.
Change-Id: Ia52092e845c33234817a1cb27cd1f17064c65e7e
Signed-off-by: Anas Nashif <nashif@linux.intel.com>
Moving the includes to include/tinycrypt. This will help make it
clear when looking at source files where each header originated from.
Change-Id: I062cb3c6ecc5bc2ed2d28228d5926646b6b5f912
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Fixes the tinycrypt library to use Zephyr checkpath acceptable line
lengths.
Change-Id: Ia7bef46a39fa029cda826ec5b2d7d42036d9bdfe
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
If the other tasks try to trigger a SW IRQ before MONITORTASK
has initilized it, the CPU generates an exception.
Change-Id: Id2745d728a7cf15132096585c073f85f8306cb38
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Made the test_15_4 application to run much faster when it is
running inside qemu (started with make qemu0).
Change-Id: I4455eca4f0426e8acc8b87d93eb80f4d179a1b48
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is now possible to loop echo-server and echo-client test
applications together when they are running in qemu.
Start echo-server with "make server" and echo-client using
"make client" in the corresponding samples directory.
Change-Id: Ic852735f7bebc93e42873e98427e282902b3ca03
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows for compile test if analysis code builds.
Change-Id: I500d727a06ef065fc65465140062ec47d31e79fa
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This will be used to poll Zephyr to send it's supported commmands.
Change-Id: I12cb93a238cd14589123d88e9d9ba4d580dd6d71
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This is used to respond to the read request of characteristic
value.
Change-Id: Ia0518fae0d70e712621578a7938009345dbfaab4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support to handle set attribute value.
Change-Id: I2631cc8744210cfd76add1be3d30e5a0f54b3a7e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for adding characteristic declaration and characteristic
value to the tester defined database of GATT attributes.
Change-Id: I108fc5a9bc5c7491fc354c71457d452baaedd868
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds support for tester application to cover GATT Server
automated tests. BTP ptotocol commands are used do drive stack to
build attributes database specified by the external tester.
Two commands: to add a service and to start the GATT server are
implemented.
Change-Id: I236c3e4d8636e97926514b2099779cb4334e95cd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch is needed to be able to test zephyr against tests
which require Zephyr to be non-connectable.
This adds handler for the opcode 0x06 - Set Connectable command.
Based on connectable flag in current settings, the corresponding
advertising type is set after issuing Start Advertising command.
If connectable, Connectable undirected advertising type is set,
if non-connectable Non connectable undirected advertising type
is set.
Change-Id: I77865b67c4b717548095ac5e398a873d1b739d6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This feature is needed to pass some tests which require termination
of ACL link.
Change-Id: Idab03c569172ea6deb3bc5cf6744e5e73bd5de3e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to new tester API in case of success Current_settings
shall be returned.
Change-Id: I1caf05180bff4756b8e7271098611d23200af8ee
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
When the timer is set, the caller needs to specify the function
that is called when timer expires.
Change-Id: Iae69986c6f32b789d708247b187d143e45d73828
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These commands are necessary to pass some of the GAP tests.
Change-Id: Ia599e7dc3dd06aa5ac4130e0d878fcddad7b37dd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to not compile SMP support for devices that don't
require pairing. It is required to support SMP channel and reply
with error for any command received even if pairing is not supported.
To handle this cleanly a null smp implementation is used that case.
Change-Id: I656a52dac882839db904eee65f25a4e29ea2d8c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile data signing support if it is not
required. Reduces image size of peripheral sample app from
45772 to 44436 bytes.
Change-Id: I2cd3515973d1a70f478cbd68426ec84fd1645d19
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This application can be used to list the PCI devices through the
console.
Change-Id: I3409ab9025b1f18a42b4cdd594fb095ebeac96f3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This avoids the case where the system has multiple threads using
floating point and the threads were not properly configured to use
floating point. The misconfigured threads will only take the fault on
first use of a floating point instruction.
Change-Id: I2be9f9f145bc4e7659e07154021ccc237774897b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default for all architectures for ENHANCED_SECURITY is 'no' now
remove redundant config option.
Change-Id: Ib49b0bc7ea02aa2214fe45194393def8e021be01
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arm project configs
Change-Id: I3915da20e0ee8298d69865ad5b07f9d5c6d59200
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arc project configs
Change-Id: I14257a9f111790d506b106ef184e859b595cd009
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
ENHANCED_SECURITY is being used to enable security options the
projects that require security options explicitly enable these options
the dependency is not required.
Change-Id: Iec96e32bd7a5faa78672d355aad368f48b0ee087
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the default for ENHANCED_SECURITY to no in preparation for the
option to be removed.
Change-Id: Ic46730b187f361226064a3e205f48433b0bebdd7
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Sample code for crypto library was duplicated and run twice.
Make the samples/crypto/ directory the contain of the source
and add the test logic and makefiles to the samples/microkernel/tests
referencing the source in samples/crypto.
Change-Id: I74d34de9351642fc4508e6bedd65e9b34676b01e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
minimal footprint disable timer and galileo requires a timer
Change-Id: I75c08775fd02bae1221ae4102bb9873060c8e85f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This introduces a generic driver set for console messages routed over
inter-processor interrupt (IPI) channels. These drivers bind to a
low-level IPI driver instance for the actual transport of messages.
ipi_console_sender installs printk and/or stdout hooks to forward
messages over IPI. There is currently no buffering on the sending side.
ipi_console_receiver installs an IPI callback which stashes incoming
characters into a ring buffer, which is monitored by a nanokernel
fiber. The fiber buffers the characters on a per-line basis and sends
them to either printk or stdout. Multiple instances of this driver
may be created in case you need to receive console data from multiple
CPUs.
Change-Id: Icebc110794fbe040f975101cd2ae6e78fb38645a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables passing the value to be used when writing to CCC so it can
be configure for indications in adition to notifications.
Change-Id: Ied89faed422e5c5ec60618d512dbd3f250f50b46
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This documents describes protocol used by external tester to drive
IUT. Currently initial version includes only Core and GAP services.
Change-Id: I2fcb366076313880116be2ead8916bb56a4b5910
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This big patch refactors tester application and put it in par with
updated tester protocol.
Change-Id: Ib016fdd0aac58a32bcdc67774843cf65d619947d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is a mandatory characteristic for GAP servie. It must be included
in GATT db.
Change-Id: I27c0c6d56f5303c3c5d1606d7656c51823f74989
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Enabling more sanity checks for the ARC architecture is an ongoing
process, disable failing tests for now.
Change-Id: I2fdabf98a5648120649649e3e32b849b79b48a7b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of multiple make options etc. the test are now run
directly from make. User does not need to know various command
line options for setting up pipes.
Change-Id: I62a56aec75c55b970b246051dccdbf458389ab8d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate RX and TX buffer count was not set in example
applications prj files.
Change-Id: If48824e894bced3134391dae651f5997820de2c1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Have a separate network buffer pool for received and transmitted
data. This way incoming packet flood cannot prevent from sending
IP packets out.
Change-Id: I2aae3bcb4ea63f36355f758de44532b167edfdb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CoAP test server runs in Zephyr and it receives CoAP messages
sent by coap client. The server can receive both plain or DTLS
encrypted CoAP messages. The server has various resource plugins
available but currently activates only three that are needed
by coap-client tester.
Change-Id: I6465a3a057eaf8b412699bba57bf7213548f0377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This callback is called when security level of connection changed.
Change-Id: Ifec130163fffe291cd012c99247017bd31173660
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to define for each descriptor its own read handler.
Each string descriptor will use generic string read handler if
possible.
Change-Id: I468a082c6875400ec4515588131132ef27cc8082
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When identity is resolved only Identity Address should be used for
identifying connection.
Change-Id: Ic179286b09afced4997a755f1977eea818bc6e54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The test application name was printed incorrectly.
Change-Id: I1686dd886c26cd94dbf2482fe904bd61e66d4a78
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the nano_fifo_get_wait() API when waiting network packets.
This function will block until there is data in the socket.
The timeout version called nano_fiber_fifo_get_wait_timeout()
is not working at the moment.
Change-Id: I42bddf8921cae0ed3caec8226b6086833534ae65
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
default_conn is assigned only on connected event so there was
no way to cancel pending outgoing connection.
Change-Id: Iba5018e887c5b3f87513fc5c8f4585fb6ec40c8d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to use strncmp for string type arguments terminaded
by NUL character.
Change-Id: Ib90517f4657de8da64f145afd0ac28aefa697026
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
To avoid multiple prints with cmd help one label will be used.
Change-Id: Ieaaffd8b4321fdb2ad2f95894d293ec1d6eb8d10
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Due to bug in test case configuration file tester application
was not build by 'Build Automation'. This application has all
Bluetooth debugs enabled so it is essential for build verification
process.
Change-Id: I51115d17a28614b7746c6d207d4362a94bc0f591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch separate character to hex character convertion part and
moves related code to helper.
Change-Id: I5c754669583228566e80a9b20a9db0e639641677
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to select more authentication options and reply
to all requests.
Change-Id: I220d945763b9381818c5caad52bf0f5e8b01ab54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This monitor_15_4 tool is run in the host side. It will connect
to Zephyr via UART using pipes. Test app1 in qemu send data
through the uart and pipe, this tool read data from pipe1
and writes it to pipe2 where test app2 running in qemu2
will read data from it and vice-versa. In between tool store
data in pcap format for further wireshark packet analyzation.
Change-Id: If5c998591edf4253fbd5e249c6c9e48fa1792715
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The dtls-client app will run in Zephyr and will send network
packets to host process (dtls-server) via SLIP.
Change-Id: I51e3424193e6a7169d9921ba56466bb0c0c0d4d1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This options does not exist anymore, no need to carry it
here.
Change-Id: I0bcafe2ff959dbc2e0fcc3f9481b65c43ea64f14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample builds multiple kernels with different configurations
starting with a minimal kernel that basically does nothing and
adds features one by one to measure the minimal footprint for the
various supported kernel objects and features.
Change-Id: Icba984845dc6f1979d16ba246bdb133cc6e3465c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The event portion of the app_kernel benchmark no longer outputs the following
(abbreviated) error message:
<path to project>/app_kernel/src/event_b.c:86 Error: tick occurred
This error was occurring as the benchmark test had hard-coded the value of
the event TEST_EVENT to 0 instead of defining it in the prj.mdef file.
Consequently, the system was using event 0 for the tick event; every time
task_event_send(TEST_EVENT) was invoked, the system treated it as a tick event.
Change-Id: I1a785a6594415bd4b0300d382f76a6d768641864
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Other apps are being compile-tested, do this here too.
Change-Id: Ibbe9e765757564e974233c1410bac320ae7a8a68
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The profiler now uses the generic ring buffer. The dropped event
count is stored in the ring buffer's value field. The data size only
refers to the extra data attached to the message and NOT any internal
representation of metadata inside the ring buffer, the event_logger
APIs now pass this information along in dedicated parameters.
Change-Id: I1f168e6a05e8d937bf86b2a4cccecbb04b0118c6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch is based on some code contributed by Dirk Brandewie.
This is a generic data structure for queuing data in a FIFO ring
buffer. Any given data enqueued is annotated with an app-specific
type identifier, and small integral value. Use of a data pointer
is optional if the necessary information can be conveyed in the
annotations. We want all the metadata to fit in a single DWORD.
The ring buffer always contains at least one free dword in the
buffer to correctly distinguish between full and empty queues.
Concurrency control is almost nonexistent; depending on usage,
apps may want to introduce the usage of semaphores and/or mutexes
to preserve the integrity of the ring buffer or provide notifications
when data is available.
Change-Id: I860262d2afc96db4476d4c695a92f7da355ab732
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add interrupt and sleep event data to the profiler sample.
Change-Id: Ie5d3c4201475824eaf833bef506140279a6c606d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Removed the term _node from the document as requested.
Change-Id: I11e7f9fb217d6cc1026e81fb4702fa534de53874
Signed-off-by: Gerardo A. Aceves <gerardo.aceves@intel.com>
CONF_FILE was dropped leaving samples build with
default options.
Change-Id: Id1a3cb06f43052fb74ed9edcc2ea275b44d2b6b4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make these public:
- SECONDS(x): macro that gives the number of ticks in x seconds
- MSEC(x): macro that gives the number of ticks in x milliseconds
- MSEC_PER_SEC: number of milliseconds per second
- USEC_PER_MSEC: number of microseconds per millisecond
Change-Id: Ic5dbf9349651a477b066edb0c6b6721da2b7e5bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The comment did not convey anything, as it was a relic from before a
previous renaming. Use the SECONDS(x) macro to make everything clearer.
Change-Id: Ia757061c4083d7567df5b214326c2cf8b6804fbf
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Previously, CONFIG_PRINTK being false means none of functions related to
the UART console and serial are compiled into the binary. This
effectively means UART console and serial drivers are disabled.
By decoupling serial drivers from console related configs, additional
options are needed to disable serial drivers and UART console driver
itself. So add those options here to disable UART console and serial,
or else the resulting binaries will be too bloated.
Change-Id: If526e42404f22caf6a550795f8277ba742625883
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This restructures the device structs and now utilizes the new
driver initialization model. This is another step towards
converting the serial driver to the new driver model.
Note that the serial driver does not initialize the hardware
unless it is being used by another driver. The configuration
of the serial port needs to be done by the driver utilizing
the port (e.g. baud rate, interrupt priority, etc.).
Therefore, some serial ports are declared but not exactly
configured.
Also note that the UART console is being initialized at
the same time as the serial port. This will be removed
in future patch, so the UART console driver will do
its own initialization.
Change-Id: Idd89954b2d0649a557ba8c869ee96512fec898e4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The test was doing some weird dance for computing the time the main task
had slept, context switching between the main task and a helper task.
The tick timestamp that marks the start of the sleep duration, which
should be taken before the main task goes to sleep actually was taken
after it went to sleep, by the helper task. This lead to weird results
sometimes on QEMU, where the main task would report that it had slept
for less time than requested.
Now instead, the main task takes its own tick timestamps, just before it
goes to sleep and right when it awakens.
The helper task takes a timestamp as well, to verify that it did do busy
work while the main task was sleeping. However, some error is allowed
there to compensate for some QEMU weirdness.
Change-Id: I4b642b49de8346be404000698eaa4ded070d4097
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The build system is actually using the output directory
as the working dir for the Make session, using a symlink
to the source directory. Relative paths don't work correctly,
it only works now due to other issues in the build system
where absolute paths are being used instead for app source
files (causing other problems).
Change-Id: I2bcd82314692902f12da51c96fe912efb68bdc5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of using a relative path in an #include, use a real -I path
in CFLAGS. This is still a hack, what we really need is support in
the build system for generating static libraries.
Change-Id: I7bc9aba3bcb7ec65f6a6119c3b2c6efc1de67e58
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Bluetooth shell now supports Signed Write if CSRK key is present.
Change-Id: I035a0d314da4997105c64da58cf85bd95fdbaa5b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to register pairing callbacks that will display passkey
in case of authenticated pairing.
Change-Id: I18422193785fdcd8a2e567adeb65199bfadcdd1f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The DTLS server is running in Zephyr and is listening on port 4242
and when it receives DTLS UDP packet, it will reverse the data and
send it back to the caller.
Use the dtls-client application running in host to connect to
the dtls-server.
Change-Id: I3306cb242498019ffc9e0519b06061c36db96f78
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make stack size the same size as in hello app. Current stack cannot
handle correctly security tests.
Change-Id: I5946c6bbcbc5079cefefddbb229b3205364b24d0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds gatt-write-without-response which can be used as following:
btshell> gatt-write-without-response <handle> <data>
bt: bt_gatt_write_without_response (0x0010f0a0): handle 0x0011 length 1
Write Complete (err 0)
Change-Id: Ide166049cf53e691a2269778bca1489f7027621f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now uses net_receive() with a proper timeout. Removed also
extra waits when sending data. Removed extra semaphores
and streamlined the code to act as fast as possible.
Change-Id: I577d4d5ff85bf13400fb6e157bc0023267658ba4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client app will run in Zephyr and will send network
packets to host process (echo-server) via SLIP.
Change-Id: Icaf941ce883aec82136ef909db67e43ab6b981f7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not touch uip_len(buf) value as Contiki IP stack
will use it to determine what it should do with the
received packet. So after we have received the packet,
we update separate datalen variable in net_buf that will
store the correct length of the packet.
Change-Id: Iab79b741508e95e581d1727645e6b1d1eacded4c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to specify a timeout in ticks while waiting
network data. The timeout value has following meaning:
TICKS_UNLIMITED wait forever
TICKS_NONE do not wait
value > 0 timeout value (only applicaple if
CONFIG_NANO_TIMEOUTS is defined)
Change-Id: Icbb33fa0eeb462659d4006dd9d948a04f39a87a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds offset to gatt-write which can be used as following:
btshell> gatt-write 0011 0001 01
bt: gatt_prepare_write (0x0010f680): handle 0x0011 offset 1 len 1
Write pending
btshell> bt: bt_att_recv (0x00111918): Received ATT code 0x17 len 6
bt: att_handle_prepare_write_rsp (0x00111918):
bt: att_prepare_write_rsp (0x00111918): err 0x00
bt: gatt_exec_write (0x00111918):
bt: bt_att_recv (0x00111918): Received ATT code 0x19 len 1
bt: att_handle_exec_write_rsp (0x00111918):
bt: att_write_rsp (0x00111918): err 0x00
Write complete: err 0
Change-Id: I4d3c038ea572da92efe0de8ce426ffca15506440
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sample project README.txt files are supposed to follow a particular format
AND have a "Sample Output:" section.
Change-Id: I91fff1057e56bc222ab82d680018a673e19e479d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Assigns more descriptive titles to the sample project README.txt files.
Change-Id: I4a0efdac481a8ed75a847871dbfe686e74a9f113
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardize README.txt files on using "Sample Output:".
Change-Id: I3a8dc18b37f36067b9f343ef443b6d35e85db6b4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Standardize on using the irq_lock/irq_unlock (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: Ib0b55f450447366468723e065a60adbadf7067a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Basically, this does not work anymore:
task_timer_start(<timer>, 0, X, <sem>);
since it does not make much sense to have a timer with an expiry of 0
ticks. The code internally was setting the duration to be equal to the
period anyway. So, to achieve the same behaviour, do this:
task_timer_start(<timer>, X, X, <sem>);
This has the positive side-effect of removing a small block of logic
that was handling the cases where duration was 0.
Change-Id: Ic4af4a17a129f14af4fea445bcaddabe89c27131
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Reflect the fact that they are not used.
Change-Id: I6ea83cb2c7532e10988cbf4350edccb78f444328
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Doing those checks went against the Zephyr philosophy of no error
checking unless absolutely necessary. Users should ensure themselves the
validity of their inputs to kernel APIs.
Change-Id: I21e5cd07ff9424ad61e81fd9d52ceef0c9584a8c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_event_set_handler -> task_event_handler_set
Align with the "verb at the end" convention.
Change-Id: I8b72d41a20a7fdd4756f90765682e317289a241b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
task_pipe_put_async -> task_pipe_block_put
task_mbox_put_async -> task_mbox_block_put
task_mbox_data_get_async_block -> task_mbox_data_block_get
task_mbox_data_get_async_block_wait -> task_mbox_data_block_get_wait
task_mbox_data_get_async_block_wait_timeout ->
task_mbox_data_block_get_wait_timeout
Previous names, focusing on 'async', were misleading, because:
- some of those APIs can be used synchronously as well
- other APIs can also do asynchronous transfer, and don't have 'async'
in their names
- the key concept of these APIs is that they use memory pool blocks
rather than raw data buffers.
Change-Id: I0c08a6cf950ab23bb4172ce25eb6f9886b037649
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add a project that shows how to collect the
data from the profiler.
Change-Id: Ie9cc88290de594720739b30d4e872fe51d353f6e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
leftovers from the renaming activities:
nano_node_tick_get_32 -> nano_tick_get_32
Change-Id: Ic9f0870ddda159311005c2ed16e0a378ab9a6a62
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_console_pc8253.conf' is no longer required.
Change-Id: Ic91922e9431a2853bb5fdcdd3e31e39f3dce90c4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As no default platform configuration uses the PIC/PIT, the project
configuration file 'prj_pc8253.conf' is no longer required.
Change-Id: I89fac2685d9fca0452e5ce9d9b035e102bd62d70
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the following project configuration files:
- prj_console_float_pc8253.conf : PIT is no longer used
- prj_console_nofloat_*.conf : unsupported by Makefile
Change-Id: I72689fa56413947f3a552645c7b2ed5ad599ed71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds unit test for microkernel private memory maps.
The code piggybacks to the public memory map test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private memory maps test move the memory maps inside
source code. So, both mdef files will need to be updated at
the same time.
Change-Id: Ia7f65f55b61d9fb0d42ba58d63662e914d69194e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private pipes.
The code piggybacks to the public pipe test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private pipes test move the pipes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I6fdb5eab7c3a1d6f4b72c26a3620cee0188b07a5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private tasks.
The code piggybacks to the public task test (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private tasks test move the tasks inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I2890f70be460c0e45208ce03d6e7897d2662f6f0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private mailboxes.
The code piggybacks to the public mailbox test (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private mailboxes test move the mailboxes inside source
code. So, both mdef files will need to be updated at
the same time.
Change-Id: I52ccc5931b1abfd3ae3d654f888d4a019268bba0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private FIFOs.
The code piggybacks to the public FIFOs tests (by
including the same source file), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private FIFOs test move some of the FIFOs
inside source code.
Change-Id: I4130ac540b10a31cd30f37890e9cc389af73e89b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds unit test for microkernel private semaphores.
The code piggybacks to the public semaphores tests (by
including the same source files), so any updates to
the test will be applied to both.
Note that the prj.mdef are different for both tests, since
the private semaphores test move some of the semaphores
inside source code.
Change-Id: Ic318bf6808514c5d335a46cb3e88ebf6000f4c3e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enhances the existing microkernel mutex test project to verify
that recursive mutex locking works properly. The implementation
utilizes the new in-file defined mutexes to demonstrate that
this capability also works.
[DL: Update the original patch from Allan Stephens
@ https://oic-review.01.org/gerrit/3256 to utilize
the new interface. Also updated the commit message. ]
Change-Id: Iaf8b4a5cd97d1dce53d6134a978cc565279d038c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Some devices (eg. Android KitKat) are confused if remote database
is empty.
Change-Id: Ie27920b6f64b12903917068101d5abb171ab42c0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
If bt_gatt_subscribe -EALREADY that means it is already subscribed and
shall not be reused.
Change-Id: I83c620454c40863c71b1289d37c2b42571a907fd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the peripheral sample app use the async feature of bt_enable() to
verify that it works as expected.
Change-Id: I15f7758944a8c34d1aaef84f0ba77a6b5bbb4695
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
echo-server can now receive both unicast and multicast UDP
messages.
Change-Id: I3837b8e7126584fa7c87958e68a8439824abd5ab
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds gatt-unsubscribe which works as follow:
btshell> gatt-unsubscribe <CCC handle>
bt: gatt_write_ccc (0x0010edc8): handle 0x0015 value 0x0000
Unsubscribe success
Change-Id: I812fd237f71c4cad8e188015f1cd4cd2f2902aa6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once connected store the bt_conn as context, this save the trouble of
entering the same parameter over and over and remove the lookups from
commands that requires a connection.
Change-Id: I9671b8fa07a1a61db45516f63eb007f19f0e59a1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes references to obsolete BSP terminology from the sample projects and
replaces it with references to platforms where appropriate.
Change-Id: I6c8071a84f77c2cfe1458e3891d2b5e5afdaf8f9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes reference to the unsupported "-T <toolchain>" option and the replaces
the deprecated "-B <BSP>" option with "-P <platform>".
Change-Id: I21ab863dded9cbfd4fc0ab2fcade59137add08cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes README.txt for nanokernel's test_xip to refer to the nanokernel instead
of the microkernel.
Change-Id: I03866e88ec67515b827b901d49b1e7b10d3866d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a couple of references to obsolete resource terminology; they now refer
to mutexes.
Change-Id: Ie7f837b6657891bdde9b09bb0ff2311fe4c19928
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It appears more conventional to require callers of function-type
macros to supply the trailing semicolon.
Change-Id: I40c67cf2ec8f7e85bdc9d8a2a29698b56d9715c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Adds to btshell app a command to enable mimic GATT client to
perform multiple read attributes request using set of input handles.
The syntax is: gatt-read-multiple <address> <addres-type> <h1> <h2> ...
Handles should be entered as hex values and are 2-octets wide each.
Change-Id: Ic37a4486a11c645685cbfc782d36457af0fe9453
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Allows shell commands read more number of input parameters.
It is updated to 10 input parameters.
Change-Id: Ia943e8c6f0caaaf74cebcdb9dbe3542d90b2e4b9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update test_15_4 makefile and prj files to support
CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART build.
Change-Id: I8247b67b1beac18f7c62349d049694cf5aa437ca
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Removes references to old platform names.
Change-Id: I65baa148006fbda916904914844b1b347f8ec654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I53e9994c794c6b4c292e776355a67b7923c2fdb8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The generic_pc and generic_pc_pentium4 platform configurations are not
essential configurations to Zephyr.
Change-Id: Idd384bc7f180c035b1467e8b56fbfe206604658f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Network sample projects no use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: Ia1ebb697d9e68974f71faa467f1f946f0d1afbd1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Nanokernel smaple projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I47f75742b663edd7c4b1858425d4583f0bc74ae7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Microkernel sample projects now use KBUILD_DEFCONFIG instead of BSP. This
is a necessary step in transitioning from BSPs to platforms.
Change-Id: I916819262cabf70296e15d9b1321fc383b88a805
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Revises the memory pool test project so that the maximum block size
is a power of 4 multiple of the minimum block size, as a reminder
of the required relationship between minimum and maximum block sizes.
Change-Id: Iff5480b7870c261d43c5a857c71a44beffc6c7f0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
There is no need to refer to a data passing microkernel object
as a 'channel'.
Change-Id: I730f88d6e77ab075832e7ed48b20eb2ec46b5ed4
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change the function signature of _InitHarware() function and rename
the function to a platform specific name now that it will be called
via a function pointer and not by name.
Call the platform *_init() function at PURE_INIT time.
Change-Id: I5168dfea81f406da135d491a2b4a24e8255f418a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The nanokernel routine nano_time_init() is automatically invoked by the
constructor initialization code, and should be invisible to the application.
Change-Id: Ic75f84856c333187a4f9fef8569698e056f6d936
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of aaaa::/64 address space which is part of global
IPv6 address space, use the 2001:db8::/32 which is meant
for documentation purposes and is not routable.
Change-Id: I56db34da852f8c313379c764bdf75a19151c45bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows to enable advertising with some fixed Advertising Data
and Scan Reponse.
Change-Id: Ie3a33a49fe8517c9e931b7805694bd9c7b05fcdb
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The listening socket was creted after we started to send data
so data was discarded. Now we first create listener and then
start to send data to it.
Change-Id: Iee706c7c862d16a582ee973b10598dde5e5f0bd0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
set_mac was removed in net_set_mac is in init_test(). Rebase was
not done successfully.
Change-Id: I0d1a2f37cdb441064ae97a0e34ae41e9c7e77984
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Set the MAC address so that the stack can generate a link
local address and mark internal variables as static to avoid
namespace pollution.
Change-Id: Ic8447054629fcdd5f7e1f8b8c5e2bb477bd63809
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo server is listening on port 4242 and when it receives
UDP packet, it will reverse the data and send it back to the
caller. This can be used to verify that the IP stack is doing
something useful.
Change-Id: Ibbc48c21f2513d59480c5a3bb34c775eb3df8170
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds gatt-exchange-mtu which works as follow:
btshell> gatt-exchange-mtu <bdaddr> <bdaddr_type>
bt: bt_gatt_exchange_mtu (0x0010c138): Client MTU 65
Exchange pending
btshell> bt: bt_att_recv (0x0010e310): Received ATT code 0x03 len 3
bt: att_mtu_rsp (0x0010e310): Server MTU 517
Exchange successful
Change-Id: I7280fb9d9fafc0f4bd1ef0f2226c255a5acf2592
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to use shell since one can copy full address
from console output. Both variants with and without braces are
accepted.
btshell> connect 7C:2F:80:94:97:39 (public)
Connection pending
btshell> Connected: 7C:2F:80:94:97:39 (public)
btshell> disconnect 7C:2F:80:94:97:39 public
btshell> Disconnected: 7C:2F:80:94:97:39 (public)
Change-Id: Ic10386ee054ade1900e5f010857c0f85e5cb364a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some comments have \param, convert them to javadoc style.
Change-Id: I6abcdab91f4f616632392292600f4b0081b2a842
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This way the stack will generate a proper IPv6 link local
address.
Change-Id: I149d82cf5623f3073b9edc64fe4e426460eb793b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mac address length needs to be 6 bytes because this
test app has no 802.15.4 support. The uIP stack checks
this and expects only 6 bytes mac address in this case.
Change-Id: I1edd340491b4690b5a2cf285c63f90950bbc3ff3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stress test the IP stack by always sending max number of bytes.
Change-Id: I830a92cca4efbc2aa00dd1bec75972884359621c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test_15_4 test application now works with microkernel also.
Change-Id: I041a917be599936089af9ffaba9c27b9aeb5a481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the loopback IPv6 address and an all-zero MAC address as the
loopback device really does not have a defined MAC address.
Clean up the code so that the loopback driver's IPv6 addresses are
not reused in other parts by mistake.
Change-Id: I07cc8bc5ad3a2ec5997bb313dd0ecaca4d9742f7
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sample should be under microkernel and not in the
top level samples directory.
Change-Id: Ide98fa64a5a6831f83bec25b778f9d5b39bdb4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds new commands to shell app allowing turn on/off active LE scan.
App uses scan results callback to get feedback when found any
advertisers around.
The dummy app's callback prints out info about findings.
Change-Id: Ifffe77b804230c19bbbcbc4f38e47210c835106d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Return code from command handler is not needed and was already ignored.
Change-Id: Ief073ccfe2ccd316b6d4eec5168fb564e96786ee
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes code looks similar to POSIX style parameter handling.
Also code is easier to read and doesn't require tricks like
'p += strlen(p) + 1' for next parameter.
Change-Id: I013e714ba81681da38e320fb69851c7b5a75bb52
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds above commands to the shell app.
Connection is made based on given address and type eg:
btshell> connect 00:00:00:00:00:00 public
In callback we get local connection id which is in fact,
the number of array entry in which the pointer to the corresponding
bt_conn has been written.
To disconnect, just provide the id eg:
btshell> disconnect 0
Change-Id: I24f7ec2de7f84c53ab847ded28a1821753c2a60d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fix a build issue after last rename of TIMO -> ZEPHYR in build
system variables.
Change-Id: Iba9fb2ae13df0c66c7c1031b3a27795a9ead0e97
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Simple tests to verify whether the microkernel timer system works
alongside the nanokernel timeouts and timers system.
Once the timer test is started, the nanokernel fifo timeout test is
started in parallel: each other's timeout times should not be affected
by the other. Also, a fiber is started, pending on a nanokernel timer,
and awakens in the middle of the microkernel timers expiring.
Change-Id: I05b307e58ac942961a4163cbe845a9bb732ecfb7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_fifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one fifo, then on
multiple fifos.
Finally, multiple fibers pend on one fifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
NOTE: The timeout APIs test is contained within its own file so that it
is easily reusable by a microkernel test that verifies that nano
timeouts and microkernel timers can coexist.
Change-Id: I5aae2d89651914fb6c39d8d09a56c7fa54533453
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_lifo_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the data in time.
Then, multiple timeout tests are done for the fibers, to test the ordering
of queueing/dequeueing when timeout occurs, first on one lifo, then on
multiple lifos.
Finally, multiple fibers pend on one lifo, and they all get the
data in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: Ida951fda746539253b9a165f48be6931d6bee05c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test the nano_xxx_sem_wait_timeout() APIs.
First, the task waits with a timeout and times out. Then it wait with a
timeout, but gets the semaphore in time.
Then, multiple timeout tests are done for the fibers, to test the
ordering of queueing/dequeueing when timeout occurs, first on one
semaphore, then on multiple semaphores.
Finally, multiple fibers pend on one semaphore, and they all get the
semaphore in time, except the last one: this tests that the timeout is
recomputed correctly when timeouts are aborted.
Change-Id: I73c174e6f15f38377a14573cb7f531e5e6ca4c07
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The test verifies that delayed fibers are started in the right order,
and that cancelling delayed fibers recomputes correctly the timeouts in
the queue. Also test the fiber_sleep() API.
Change-Id: Ic3169a90b434a81c96e7c5d3c74c39431c988f39
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
KLIB_DIR builds are a relic from the previous build system.
Change-Id: I382db45f0a21786e1b7c50c9a881c82feb2c7481
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This API now uses an approved Zephyr OS prefix.
Change-Id: I1041b982492ea7b76213e3b57cf28a9f17e7fd9d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates confusing references to "channel", and improves
readability of project output.
Change-Id: Ib4f699caae5a015832207a408bd168903e791756
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new build system no longer uses this directory, since it rebuilds
the (minimal) standard C library every time a project is built.
Change-Id: I1ca6b949bfa260f1d262276be653ddd6bd1cc53b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix typo and reformat test to make it more logic and reflecting
doxygen documentation.
Change-Id: Id869f0131132c9287eab71d11ae40d194a20ca20
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
After quark UART configuration was refactored it is not working
anymore. Since quark was never an officially supported target just
remove it from the regression tests.
Change-Id: If4bae99f5e0dfecfd3729ac0c42d7fd3d8affa0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses BT_GATT_CCC to declare CCC descriptors which makes the core
to managed the CCC configuration so the task don't have to do it.
Change-Id: Ied4fc7eaa1f9f3e6c23d4d5b20d5c26d606f93f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds write callback to CCC descriptors storing the value in a stack
variable.
Change-Id: I8cd2567c6fee730500b446192b73fc82d86ba1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Notify property and Current Characteristic Configuration to Current
Time Service in peripheral app.
Change-Id: I44f36eea4f129c7b407b045da892f2ba88338592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Current Time Service currently providing hardcoded time since
there is no way of getting current time in the OS.
Change-Id: I9954d51f77905230a6dd180f37d3a48f379c69ec
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updates references to this environment variable, which were missed
during previous renamings.
Change-Id: I1126271ce8b84d3eaedeab11198d3a3b645393af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the name
is simply removed, as it isn't necessary.
Change-Id: I3796f2aebe802f8c6045b7424a3e7aab4d5fb8e8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of obsolete OS name, which isn't really necessary anyway.
Change-Id: Ic25b3addd43c84a75dacd6c61fdcc7a53217d320
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This warning isn't relevant to Zephyr OS.
Change-Id: I8a115dec61c0c325e5b09337cd3a785fb0f5c75b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The ENDGROUP symbol isn't needed as it is identical in nature to
ENDLIST. The EMPTYID symbol isn't referenced anywhere (or described).
Change-Id: Ic2ba115ee6cde65fa5e57f8607ffa95979ba5f5a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Several files were not explicitly including APIs that they reference,
which could eventually lead to trouble.
Change-Id: Ib33cadfa658280df3fcb4c670463d41b63097b31
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of this non-standard terminology, and spells out
"microkernel" in full (when needed at all).
Change-Id: Ibfae84225fdceb526d8732bc23a0885f2d3be462
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the instruction directing users to issue "make pristine"
before building a sample project, as this should be unnecessary
under normal circumstances and can cause the user to unexpectedly
lose their current configuration information. In its place, a section
on troubleshooting is added that describes how to rebuild a project
using the desired configuration.
Change-Id: I4eaace2888000c3ec5d101c27a38c74c2987312e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard boolean type library
defined for C99, rather than having its own custom boolean type.
Also revises sample projects that used the non-standard type.
Change-Id: Ib41b7f836da25352aa5ae9dfbbfdd29739017b6f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
As a result of the conversion to the new build system, this file
was missed when the test project was eliminated.
Change-Id: Ie61d2549910cfeee2c0627451d05a5b1faff3deb
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates sample projects to ensure that fiber stacks are properly aligned by
using the __stack tag.
Change-Id: I4f92033571d65aa87b6d46da5d7cb6d92eadc27a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The length of time it took for the microkernel's test_fp_sharing test to run
was occasionally causing issues with sanity_chk. The test would take close
to five minutes to finish and sanity_chk has a five minute timeout for the
tests. To resolve this, the number of iterations for which the test executes
has been cut in half (from 1000 to 500).
Change-Id: I171b96f6af81a8b08d0367beecab536f16d1ca7e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Future commits will prevent task_timer_alloc() from returning
INVALID_OBJECT.
Change-Id: Ib7ec2e0fafb625223d762d73f15c128f134169b3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The number of timers in the system is no longer configured via the VPF, but
rather through the kconfig option NUM_TIMER_PACKETS.
Change-Id: I58a4b3009e183a9d04e3618418baa73ed296d0af
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates the need to reserve the "kernel_" prefix in the
kernel namespace. Also, aligns versioning with other APIs
that are neither nanokernel_ or microkernel-specific, such
as the system clock APIs.
Change-Id: I81e43cd03849b45a4b432b0875dc8b1d5862dba9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the kernel now provides a minimal string library, there is
no longer any reason not to use the standard memset() and memcpy()
APIs.
Change-Id: Iad587ace6f41fd94c9c961d13d9322495a7da1be
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Test project is no longer needed, since the associated library
is now scheduled for removal.
Change-Id: I843018e647c4bdc82c785ae21dbfa9de608c0d50
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit enables the outdir directory.
Kbuild output files will be generated at the outdir directory
inside the project directory.
Change-Id: Icec04aca1753326c9d50dea20c71850c1d8c3dd0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes an issue with the boot_time sanity check
when tested for minute ia processor.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia5be3ceaf71114412819bac131b71686d775c6ca
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes a kconfig dependency in the nanokernel boot_time
sanity expert test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ieb5c3c2033045a7db0382298ade8427cf31d713a
This commit removes the TIMO_BASE setting from the sample
Makefiles.
Change-Id: Iff487ecb1e412e379528cca520470f87123cf4b4
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles to add sanity checks for
the bluetooth driver.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iadfe6eb2662347a981393ffeb3e343f32c5f67f0
It seems CONFIG_PERFORMANCE_METRICS is needed for this
test to build, so enabling it.
Change-Id: Iafc0be794f0931b33bcef2ba3ace56ee88f75258
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the source Makefile for test_fp_sharing.
Change-Id: Iab70d6fb3b17b8e078549130b10c6c9c8a956b73
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
nanokernel config overlay files.
Change-Id: I838b76aefa79e6079b4c8420125c7e711b6441d7
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit updates the dependency symbols needed in the
microkernel config overlay files.
Change-Id: I0a846956a7d0d6aaa93cd4bf11ba3853f6301220
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds all the root Makefiles needed by the
microkernel sanity tests.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7a267a180ba617ce95a499dcf2782630273e8566
This commit adds all the root Makefiles needed by the sanity tests.
Change-Id: I7ef21d0bcd2c383218d600d291111861fe307abd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the list of files that compose the
benchmark-latency measure test.
The raise_int.c files is copied from the test: test_task_irq
because there is no clean way to reference this source outside
of the project in Kbuild.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I20d5cdd042ba35945d213e49e80004e886bfdc6e
This commit fixes the include path for the nanokernek
benchmark test.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I639126b7fcfe82357f166c602049bc09f195c103
The following commits adds the main Makefiles for the nanokernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia7789ce83a1b6a62805a15fead57a1737a856c2c
The following commits adds the main Makefiles for the microkernel
benchmark test, using parameters to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7601df92006ca81b3680f6c2b4e25de076512e41
This commit adds the EXPERIMENTAL ksymbol to the configuration
snippets used by the benchmark tests.
Some configurations options in the snippets have dependencies
agains this ksymbol.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ia714e913777a697cc8b1eafa0fc097496b5972c5
This commit adds the parameters to the Makefile.kbuild for
micro and nano kernel apps samples.
This prepares the sample apps to be used by the sanity check.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7636f0375493e12b4604f6fb6c4b6100d2c6604c
This commit adds all the Makefiles needed to integrate the benchmark
testing in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I7b29cf7839e95b94acc27a45677a067ca5a0c00d
This commit fixes an issue with the Makefile describing the
philosophers demo.
Change-Id: I5502e207aa5d87c04e58daa2d391e2d89ba91a67
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds Makefiles for each sample test in the project.
The Makefiles integrate the test samples into the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I8d84756836c1f7d00dc823d7ff76334c75304d66
This commit adds the capability to the Kbuild system of adding
samples and projects to the build process.
This commits adds the hello_world and philosophers sample code
as an example of how to configure a project into the build
system.
The project can be hosted inside the kernel source tree or
outside the kernel source tree.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id980e959ac6e0061f8227d5d81191a169bfc8fc3
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds attributes for Generic Access Profile.
Change-Id: I1fe08429f80341e7ba9fc06ef35a6df9b5abbf84
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Length of "Test beacon" is 11 + 1 of type that should be 12 not 16.
In addition to that make the data variable static since they are only
used locally.
Change-Id: I2d7fb16cf7d383dafc9b083da6cd63a4d9be21c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build peripheral app for targets: pentium4 and ti_lm3s6965
Change-Id: Id98c94217ad39e1716b8f8bc6031b8814bae06f3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1) Now invokes pipe routines directly, without the use of function
pointers.
2) Eliminates unreferenced _DEVICE_CHANNEL symbol.
Change-Id: I6e26476265ed8f33febb5a06c9d03daf7147ee5e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Keys off variations of "ICC" to remove references to the Intel C Compiler as
it is not supported.
Change-Id: I09f67880b39839982ed1c450e564c274440628a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This project requires access to non-public kernel structures
for testing purposes.
Change-Id: Ibfa119b99bda170498503cdbbee6b98f5cf41f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The initial memcmp implementation was buggy, so to have at least some
sort of sanity testing of the implementation add a test case for it to
test_libs.
Change-Id: I9e1a48e4b646e80258c1689dde2461a6134dddf8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable task_irq_object is global because the test_task_irq project
needed to access it. That data should only be accessed through the API.
To make the variable local, break that dependency to the test project
and restrict the access to the variable.
Change-Id: I1ccb21625d456714a038e0374d124b42aa72e577
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Fixing the folling whitespace issues:
- SPACE_BEFORE_TAB : We should not use white spaces before tabs to alignment.
- TRAILING_WHITESPACE : Lines should not end with a white space.
- QUOTED_WHITESPACE_BEFORE_NEWLINE : Removing unnecessary whitespace before a quoted newline.
Change-Id: I024e8d39164c5e5e9d8370f3499d21b49147feee
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The 'else' statement should be in the same line that the
close brace of the 'if' statement. E.g.:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
This commit fixed this kind of error using the following script:
#!/bin/bash
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
if [ ! -h $file ];
then
sed -i '/^[ \t]*}$/ {
:review_next_one_too
N
s/^\(.*\)\n[ \t]*else/\1 else/
/}$/ b review_next_one_too
}' $file;
fi;
done
Change-Id: I7e811a572d735fa08e84850055ebbde29eb10e8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There should be a whitespace between the 'if', 'for' and 'while' statements
and the open brace. this commit fix this kind of error.
Change-Id: I4bae17d98f8ec8b698d40253a9a4c873111a8904
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
There is no longer a reason to expose information about the
internels of the microkernel's event subsystem to application
files.
Note: The one sample project that tests event processing now
explicitly declares any non-public event APIs in requires.
Change-Id: I4c3f85a7b0bc485713c21424a923102b4f400ced
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Line's length should be shorten than 100 characters. This commit
fixes these lines separating them into two parts.
Change-Id: Ic68c9086866cd778187aa1465470acc0485e2271
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit fixes the issue marked as SPACING by the checkpatch script
deleting the whitespaces between the function name and the open parenthesis.
Change-Id: I972b1646904bf6e1131263f94ab5024a528ae07d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth shell sample application make use of serial console shell
and register Bluetooth commands to it. It shows example how console
shell might be used.
Change-Id: I98340422b90e85dc7a2c44823536121999a08952
Co-authored-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It is not necessary to add any PRJ_INCPATH in order to build Bluetooth
samples.
Change-Id: I3ddb0a645e475d937a7067059e8bf5caa783a04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a sample which initializes Bluetooth and enables non-connectable
advertising (i.e. starts acting in the LE broadcaster role).
Change-Id: Ic554b1354464b357b44215af1c0b613f123aeb5d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_regression scripts builds all listed projects for all
configurations mentioned in the PRJ_LIST. For targets specified with
"!" it executes test in qemu.
Change-Id: I971a797b2a89547bb14208d0d43d1a36597bad52
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new targets for sanity_chk script: fsl_frdm_k64f and ti_lm3s6965,
this would add compile tests for mentioned BSPs in sanity check
script.
Change-Id: I556f8e3a5048d2a58ab09b10197e0cc6fb3c8765
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: Ibbe8ebbab72abb02505f47a82c904f0e9460e812
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ti_lm3s6965 and fsl_frdm_k64f targets for bluetooth test.
Change-Id: I054c9500511fe40969127445444f85f3fe85902c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hides the existence of _task_nop() from everyone but the
microkernel's no-op subsystem itself. (This change forces the
sample benchmark project that measures no-op performance to
explicitly declare this API itself.)
Change-Id: I0cb2ec32d1c56b10743d5b2e727de2d5a99c95ea
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This is renaming the current stringTest to a stringMemsetTest as a
start to adding in all the other string tests that are currently
not covered.
Change-Id: Ic8fb9263e5588fe16a2cadbec24ffc0565c8224b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Currently these tests are disabled in the regression_chk
application.
Change-Id: Ibf53b25a08201db0b50df7dca96f638b419ea4a8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
All the other test_* functions have recently had this added in.
Bringing this in to be consistent with the other functions.
Change-Id: If8adf58a82445f6b509015c56937353fab79d823
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
After the tree re-structuring, several of the files that the test_libs
functions use are no longer valid, from headers to functions. Updating
to run on the current lay of the land.
Change-Id: I3359a782f5ae8faa7909a13a4cca47f82c22797f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Spaces between the function name and the open parenthesis are not allowed.
This commit fixes the case where only one open parenthesis with leading
whitespaces is present in the line.
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces between function name and open parenthesis
for line in $(eval $checkpatch_script $file | grep "WARNING:SPACING: space prohibited between function name and open parenthesis '('" | cut -d":" -f2)
do
echo "$file : $line"
sed -i ''$line' { /[ \t](.*[ \t](/ b skip_it s/[ \t]*(/(/ ; :skip_it }' $file;
done;
done;
Change-Id: I1e026eaee930e297374e5f2f725b78f29824dee3
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Changing each four whitespaces for one tab at the beginning of the
lines that the checkpatch script marks as having the warning LEADING_SPACE.
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "WARNING:LEADING_SPACE" | cut -d":" -f2)
do
sed -i -r -e ''$line' {s/^ /\t/; s/^([\t]*) /\1\t/g}' $file;
done;
done;
Change-Id: I999e59710f52098ad3ec336b99c05356215cc671
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The open braces of the 'if','for', 'while' and 'do' statements should be at the end on the
same line of the statement to comply with the defined coding style. E.g.:
if (x is true) {
we do y
}
Change accomplished with the following script:
#!/bin/bash
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*" ! -path "*/outdir/*");
do
if [ ! -h $file ];
then
# obtaining the line's number where the error is reported in a reversed order
reversed_lines="";
for line in $(eval $checkpatch_script $file | grep "ERROR:OPEN_BRACE" | cut -d":" -f2)
do
reversed_lines="$line $reversed_lines";
done;
# fixing the issues in reverse order due to lines can be deleted affecting futher lines
for line_reported in $(echo $reversed_lines);
do
# search for the line where the open brace is
char_found="";
let line=$line_reported-1;
while [ ${#char_found} -eq 0 ]
do
let line=$line+1;
char_found="$(sed -n ''$line' { /{/ p }' $file)";
done
let statement_line=$line-1;
let brace_line=$line;
# condition to avoid modifying lines that ends with the character "\"
char_found="$(sed -n ''$statement_line' { /\\$/ p }' $file)";
if [ ${#char_found} -eq 0 ];
then
# fix the issue
echo "$file : reported on $line_reported (found on $brace_line -> moved to $statement_line)";
sed -i ''$statement_line' { s/[ \t]*$//; s/\([ \t]*\/\*.*\*\/\)$/ {\1/; /{/ b already_done s/$/ {/; :already_done }; '$brace_line' { s/{[ \t]*//; /^[ \t]*$/ d }; ' $file;
fi
done
fi
done;
Change-Id: I517c40bb33840ef531f2319354350f578b238abb
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Instead of having custom helpers (like NELEMENTS) for evaluating the
array size avoid the code duplication by using the now available
ARRAY_SIZE macro.
Change-Id: I40e2e55bd4a68e3d24854c12086432aa17ce1abe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5c4719458d7bb90af2ba21594deed6885f958d34
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id3f9096f28a1bf98035c6a531cd8d2dc66e6448a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
A number of fibers pend on a LIFO, then the task queues data on it, once
for each waiter. Each time, the first fiber in the queue wakes up, is
context-switched to, verifies the data is the one expected, and gives a
semaphore. The task finally must be able to obtain the semaphore an
amount of times equals to the number of fibers.
Change-Id: I2709ec56368fc72d365bd752657fb319a9b6c394
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A number of fibers pend on a semaphore, then the task give the semaphore
once for each waiter. Each time, the first fiber in the queue wakes up,
is context-switched to, and gives another semaphore. The task finally
must be able to obtain the second semaphore an amount of times equals to
the number of fibers.
Change-Id: I36bcd6f5b1b0df73fdb35c2dbbbc639fec9dbae8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Change _nano_ticks to 64-bit with the functions that operate it
for the consistency with microkernel.
Introduce *_tick_delta() functions that return 64-bit value
and *_tick_delta_32() that return low 32 bits.
Change-Id: Id02c9f4b2b5c309ad9aa0a82bb7f4330af7e34a3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to better support different compilers, each test that
uses inline assembler, includes a compiler specific header file
that contains the proper code.
Change-Id: I7e2e27a0663501f934a5bb3539f7e23670a1e755
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
These options are no longer required as malloc-type support has
been previously eliminated.
Change-Id: I93fdb93395bc53c8a550a64fa61a7339d74ba278
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This renaming will impact the following functions:
nano_node_tick_delta
task_node_tick_delta
Change-Id: I5d3fdfe0121674d88b8f3d8777150b2242b88d1a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes.
This will impact:
task_node_cycle_get_32
isr_node_cycle_get_32
nano_node_cycle_get_32
This change also updates the nanokernel test API to work with the change.
Change-Id: I68de883b07d4775b09fda13e503c040b3f14baa7
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We no longer support the concept of nodes. This will impact the following
functions:
task_node_tick_get_32
isr_node_tick_get_32
nano_node_tick_get_32
Change-Id: I27184c76516da16a0c3f335656f9efcee2fb549d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This enables debug for HCI_CORE for samples.
Change-Id: Ide0b3c3db0165a5d00439a7bd05fb516bf67a2f5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable CONFIG_BLUETOOTH_DEBUG option for Bluetooth samples.
Change-Id: Id0d0377082b16f78f15c5e968c866bed2df69844
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add nanokernel configuration to build Bluetooth init sample. Later on
sample would added to sanity check builds.
Change-Id: Ib7251c1b3f5d62c4f1e0bb1fba253ebb1e9342df
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to Bluetooth the subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I39526acbb25e7d4bb322d4511659a40505874592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to the Bluetooth subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I1b324c82ce8be2ce73f2b41a07135b0bc76eed61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds a simple app which initializes Bluetooth and enables
connectable advertising (i.e. starts acting in the LE peripheral
role).
Change-Id: I15bb43ce657b5592d32187a0dfd22ba8bd912641
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Revises the nanokernel footprint benchmark project so that the
minimum x86 configuration explicitly excludes support for the
system timer. (This doesn't actually save any memory, since timer
support was already being excluded; however, the project now makes
this lack more apparent, and does it the same way as the minimum
microkernel benchmark project does it.)
Change-Id: I509994bb640fee3208e4c1397a79cd134172370a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark project so that the
minimum x86 configuration excludes support for the system timer.
The resulting "tickless kernel" image is about 1200 bytes smaller
(about 15%).
Change-Id: Ie7be8427963818c7d0d75173d3da844722487f0b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Benchmark code that depends on the state of LITE-related symbols
has this dependency removed, and is now coded as if these symbols
are not defined. This change has no operational impact, as LITE-
related symbols were never defined.
Change-Id: I9b9a108223903b8e4dd675a599ca5b8e5cbe7fc7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
By default, the kconfig option SECTION_GARBAGE_COLLECTION is already enabled.
Removing this option from the project configuration files does not change the
resulting images.
Change-Id: I0f3329aa15a341c2c1082f75162b2b3e12447a26
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Explicitly configures the number of task priorities for sample
projects that require more than 16 priorities. (This ensures
that the projects continue to work properly when the default
value of NUM_TASK_PRIORITIES is reduced to 16 in an upcoming
commit.)
Change-Id: I03b9ae68a6b782c62c8799f44d17e659e7d6074e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises the microkernel footprint benchmark sample projects to take
advantage of the NUM_TASK_PRIORITIES configuration option. Most
notably, this reduces the size of the minimum microkernel configuration
by over 500 bytes.
Change-Id: I2be1b0a5a09800559df4d1bf355de38d6c0b9ab3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removes the assignment of kconfig option CONFIG_CPU_CLOCK_FREQ_MHZ from
boot_time project configuration files that redundantly set it to the default
value (20).
Change-Id: I901b2d4dc85d1de53dc4a1809b422ee16301ac03
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Simics is not supported. As such, the sample project README.txt files must
not provide instructions on how to execute an image using Simics.
Change-Id: I6cc09169902b5e10f50799c280d0bbc63f1ae624
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All uses of TC_END are functionaly equivalent to each other
and to the TC_END_RESULT macro. Change TC_END to TC_END_RESULT
so that they are consistent. In the future when TC_END_RESULT
is extended/expanded, it only has to be done in one place.
Change-Id: I61bad52098187f6115896688e0a545d202b6fd05
Signed-off-by: David Norris <david.norris@intel.com>
most places call TC_END_RESULT before calling TC_END_REPORT.
These new calls to TC_END_RESULT are added so it is used
consistently in the microkernel tests.
Change-Id: I1125662c47a487b1bf4054d63ee2b9dc314a253e
Signed-off-by: David Norris <david.norris@intel.com>
These options are now enabled by default.
Change-Id: Ie7f2abb7b7c89f1a5a02ddc831367710a3d72c1f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Revises ARM M3/4 ISR installation project, which doesn't actually
require the GDB_INFO capability.
Change-Id: I9eefba5678e2c4a0fa7a8e57df603d25af144eb1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises boot time benchmarking project so it doesn't utilize the
CONTEXT_MONITOR capabililty, which is still [EXPERIMENTAL] and thus
could result in potentially misleading results.
Revises ARM M3/4 ISR installation project, which doesn't actual
require the CONTEXT_MONITOR capability.
Change-Id: I45d2abe85a0049b0c745652d2e78210c9696016d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises this option to make its purpose clearer, and to align it
with other experimantal monitoring-type configuration options.
Change-Id: I593bb7560b5a0544eb05affaa07b59dd78ea907e
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This patch adds a very simple application for demonstrating the use of
the bt_init() API. Right now this is just tested to work with qemu and
the HCI UART driver with the help of the btproxy tool on the host OS
side. More information is available in the samples/bluetooth/README
file.
Change-Id: I03f92d158e9e5d57275241502bb8fa94350fc335
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4b7f7806fcfcbeed1abbc2421c3fc470af87eb7d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Idcd3b4dfd86b6e835638623fa7b39401cabdee06
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
VisualDSP is not supported. Furthermore, with the removal of the VisualDSP
comment, there is no longer any justification for the custom BENCH_MIN() macro.
Thus, it is simply replaced with min()--defined in "util.h".
Change-Id: I3c08add1fc9fcd98c388b843c5849fc71fa84fd3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The task_mem_pool_moveXXX() routines are only relevant to multi-node systems.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I575c32a74b158c8b9b6ac6e1baef7b0e4f988270
The routine _task_mem_pool_move() is only relevant to a multi-node system.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I1a97e2b87d29df7a1a63bcd6d8eea290382f3a7e
Fix benchmark projects makefiles to use i8253 specific configuration
for only two variants of generic_pc BSP - pentium4 and minuteia, but
not for the whole BSP.
Change-Id: Iac89e29d2e26ee411d9c2d2fbcd3335c0e71fb06
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Move time calculation macros from application directory to kernel
directory, since it is used by a kernel component.
In order to follow namespace and naming conventions, convert
macros to SYS_CLOCK_HW_CYCLES_TO_NS* form.
Change-Id: I96e9149c399adc363aed5095ae82a1abc78d2977
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
"Unsupported stdlib" functionality is not relevant to the current "minimal"
libc implementation.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Several sample project tasks that are not to be automatically
started now indicate this by simply specifying an empty task
group list, rather than by defining and using a new task group.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Instances of the custom OFFSET() macro are replaced with the standard
offsetof() macro from stddef.h to reduce code duplication.
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This commit changes the pointer's location in order to comply with
the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Ibcf1ef0e4fc53b0cb5286b36119e76d017f24cd9
This commit adds the parameter to the reference of the extern function in order to
avoid the checkpatch issue ERROR:FUNCTION_WITHOUT_ARGS.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I42c53314232622a8e2e615420584601ce9b85404
This commit fixes the coding style of the 'if', 'do', 'while' and 'for'
statements in order to comply with the defined coding style.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: I70d002462db48f36b9589cdb229ba928f3f424b4
This commit fix the return statement in a void function due to this is not useful.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@linux.intel.com>
Change-Id: Icae7892853ed1c6c56c18e0c0c8f8fd1610491ee
This commit deletes the exceeded spaces after #ifdef declaration on the line that
the checkpatch script mark as having the SPACING error in order to complay with
the defined coding style.
The script used to perform this fixes was:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: exactly one space required after that #ifdef" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/^#ifdef[ \t]*/#ifdef /g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: Ic9bb67243f91fa3b5aca6288b306f9b4e8c816fe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit deletes spaces after open parentheses '(' and spaces before
close paratheses ')'.
This modification were done with the following script:
checkpatch_script="$VXMICRO_BASE/scripts/checkpatch.pl --mailback --no-tree -f --emacs --summary-file --show-types --ignore BRACES,PRINTK_WITHOUT_KERN_LEVEL,SPLIT_STRING --max-line-length=100 "
cd $VXMICRO_BASE;
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
# fixing spaces after open parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited after that open parenthesis '('" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/\([ \t]*/\(/g }' $file;
done;
# fixing spaces before close parethesis
for line in $(eval $checkpatch_script $file | grep "ERROR:SPACING: space prohibited before that close parenthesis ')'" | cut -d":" -f2)
do
sed -i -r -e ''$line' { s/[ \t]*\)/\)/g }' $file;
done;
done;
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I4482fc50ec45542afa2e60c5f2fef4e75fb24dd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes the coding style of the function declarations and aligning
the open and close brackets and change the style of parameter's documentation.
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change-Id: I648d36eb29dafc7fcd87b8db01e682bea993e5d2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updating nano kernel functions to follow a consistent naming convention.
Part of that process is the removal of camelCase naming conventions for the
preferred_underscore_method.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find . -type f \( -iname \*.c -o -iname \*.h -o -iname \*.s -o -iname \*.kconf \) \
-not \( -path host/src/genIdt -prune \) \ \
-not \( -path host/src/gen_tables -prune \) \
-print | xargs sed -i "s/"${1}"/"${2}"/g"
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
QA related scripts should be either maintained out
of the tree or come as enhancements to the sanity check
scripts.
Change-Id: I6dceed81f66b84cedad2dd84fd42d6b388de3468
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
