Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
Add hide-defaults-note to the .gitignore file to prevent
people from commiting it by mistake.
Also add the Eclipse .settings folder.
Also ignore all the .*project file (IDEs typical pattern for
project files)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In a429104095
A hide-defaults-note file was introduced by mistake
in Zephyr's root folder. This file should not have been
commited => remove it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch adds a driver for Intel PRO/1000 Gigabit Ethernet controller.
The driver currently supports only a single instance of the NIC.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This will be usefull to tell when Ethernet device has its attributes
filled in by DTS rather than by Kconfig.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert over SiLabs based boards to use device tree instead of board.h
to describe buttons & LEDs. There are a few boards that the button
gpio flags need validation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert gpio_gecko driver over to using device tree. Added binding
files, updates to dts for various SoCs that use gpio_gecko.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates the mem_domain_apis_test sample and the
mem_protect test, so they can compile and execute in ARMv8-M
platforms, which do not support the P_RW_U_RO access permissions
combination (privileged read/write, unprivileged read-only). The
modification consists of, simply, selecting a different access
permission (P_RO_U_RO) when building for ARMv8-M MPUs with the
unmodified ARM MPU architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARMv8-M MPU it is not possible to have the following access
permissions: Privileged RW / Unprivileged RO. So we define
K_MEM_PARTITION_IS_WRITABLE macro separately for v8M and v7M MPU
architectures (in the separate include files).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for CONFIG_SYSTEM_CLOCK_DISABLE so applications
may be compiled with CONFIG_REBOOT.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow apps to compile with CONFIG_REBOOT,
add a weak stub for sys_arch_reboot which does nothing
in the POSIX arch
POSIX boards may choose to provide a more sensible implementation
if relevant.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Limit the amount of bytes to write to EP0 to 64 bytes so that there is
no overflow or error when sending.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
USB controller was performing the fragmentation by itself and the driver
was not aware if current chunk is the last one if data size is equal to
maximum chunk size. Some hardware controllers (i.e. in nRF52840) handle
the status stage by hardware which must be triggered after the last data
chunk.
Currently, the whole remaining data is passed to the driver, and the
driver decides whether to fragment the data internally, or send only
the chunk and report back to the stack.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This commit removes the Kconfig symbol definitions
that signify the UARTE_1 pins. The symbols are
already removed for UARTE_0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extended ring buffer to allow storing raw bytes in it. API has been
extended keeping 'data item' mode untouched.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add maximum-speed property to usb nodes and set it to
their maximum on-chip PHY capability.
SoCs with USB device controllers only support full
speed, so we don't add maximum-speed to these nodes.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add maximum-speed property to usb node.
It configures USB controllers to work up to a specific speed.
Valid arguments are "super-speed", "high-speed", "full-speed"
and "low-speed".
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
A new CAN API is now provided in stm32cube packages.
STM32 can driver is implemented on top of initial CAN API which
is now legacy API.
Disable new API and enable legacy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert over x86 based boards to use device tree instead of board.h to
describe buttons & LEDs. There are a few boards that the button gpio
flags need validation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Cypress PSoC6 specifies some input sections in the startup
scripts. These sections (.heap, .stack, etc.) need to be placed
at correct location.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the SoC to specify some additional linker script
fragments into the bss, data and read-only data sections.
For example, the Cypress PSOC6 has a few input sections that
must be put into bss and data sections. Without specifying
these in the linker script, they are consider orphan sections
and the placement is based on linker heuristic which is
arbitrary.
POSIX is not supported as the main linker script is
provided by the host system's binutils and we have no control
over it. Also, currently Xtensa SoCs have their own linker
scripts so there is no need to this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The CCM section name macros are missing the leading period.
Add the period so those items supposed to be in CCM sections
are actually being placed correctly.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some ports, e.g. nios2, have POSIXish headers (e.g. signal.h) in
their toolchains, which get includeded otherwise, and cause
definition conflicts.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
From-current-dir includes like "sys/types.h" are dangerous - they
turn out to cause #include_next directive to not work as expected -
instead of including next file (which is in our case should be
libc's), it will include the same file once again (apparently
because with #include "", a file is found from the current dir,
so next search will countinue with -Iinclude/posix, and find
sys/types.h there again).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For read/write/lseek, use size_t and off_t types, as mandated by
POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/unistd.h.html
Also, prototypes of unistd.h functions should not depend on
CONFIG_POSIX_FS, as (many) of them deal with generic I/O, not with
files in filesystem per se.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Compilation of this driver was broken by commit 07ff2d5
as reported in issue #10453. This commit is fixing it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit adds missed const modifier for addr pointer for
bt_le_set_auto_conn function
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
