Move to the new devicetree API and stop using DT_WDT_0_NAME fixup
macros. All existing in-tree SoCs with fixup names are still supported
here via compatible. The watchdog0 alias is also still supported.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move to the new devicetree API and stop using DT_WDT_0_NAME fixup
macros. All existing in-tree SoCs with fixup names are still supported
here via compatible. The watchdog0 alias is also still supported.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert one old style DT_INST_n_..._LABEL macro that got missed to
DT_INST_LABEL(n).
At the same time move driver to also use DT_INST_FOREACH.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the STM32L4x SoC goes into STOP mode, the SPI device is disabled.
This cause the pins to not be drived anymore (i.e. they are floating)
except through their pull-up or pull-down.
From the logical point of view, the NSS pin is held high by a pull-up
so it's not a problem if the other pins are floating. However those pins
are floating input for the slaves, which increase their power
consumption.
The solution is to hold the state of the pins through a pull-up or a
pull-down. This is already done for the NSS and MOSI pins, but not for
SCK. Fix that by using pull-down on the SCK pin the same way it is
already done for the MOSI pin.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Most of the MISO and MOSI SPI pins of STM32L4 SoCs are configured with
a pull-down except PE14 and PE15. Change them for consistency.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The return value of the interrupt is never used, so remove the
functionality from the API. We ripple this change into the
ARCH_IRQ_CONNECT and ARCH_IRQ_DIRECT_CONNECT implementations. With
this change we can also remove the compound expression as that is
not needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several functions that are syscalls were passing structs by value
instead of by reference. Just changed that and implemented missing
verfication handlers for them.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
espi_read_flash should have implementation called
z_impl_espi_read_flash and not z_impl_espi_flash_read. Same thing for
espi_write_flash.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add verification handlers for some syscalls that are just missing
that. Though there are syscalls still missing that but they need to be
fixed before adding verification handlers.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This option prefers serial device names which are stable
across device plug/un-plug on platforms that support it (currently
just Linux, via /dev/serial/by-id).
This feature is opt-in as not all manufacturers include the
appropriate metadata for udev to generate unique names for their
devices.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These drivers use legacy DT APIs to access data by node label. Update
them to use the new API.
Leave the existing Kconfig options in place. This helps with
bisectability in case of regressions and lets us proceed
incrementally. Removing the per-instance Kconfigs is also nontrivial
in these cases because of hard-coded dependencies in other subsystems.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Random readability improvements:
- avoid a stack trace on error by using sys.exit()
- include "error:" in the error() output, for grep
- print conflicting addresses on multiple IRQ registration
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can't pass __COUNTER__ and then use it with '##' directly, because
the result is that the actual token __COUNTER__ is what gets pasted.
Fix that with another expansion, so __COUNTER__ is replaced with a
number before '## can' see it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This GitHub account has been disabled for over a year (it was replaced
by a `ricardosalveti` account). Remove from CODEOWNERS.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
During the last refactoring of the sample, CONFIG_MCUMGR_CMD_FS_MGMT
was mistakenly set to n instead of y for the bluetooth transport.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Some external audio devices require a master clock to be provided by
the I2S peripheral to work correctly. To allow for the operation of
these devices the master clock output should always be enabled when in
master mode.
Specific applications requiring this signal to be output can configure
the desitnation pin via the pinmux driver.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
Add dts support for the headers on Adafruit Feather boards.
This will allow adding FeatherWing boards as shields.
Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
Like other STM32 series the STM32L4x SoCs have an internal voltage
reference source that need to be enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_GPIO_MCUX_LPC_PORT0_NAME and CONFIG_GPIO_MCUX_LPC_PORT1_NAME
aren't used anywhere so we can just remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the majority of the device tree into nxp_lpc55S6x_common.dtsi and
use ranges to handle the different address may for non-secure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Give NULL pointer when ad_len or sd_len is zero, this stops the host
from setting a zero length advertise data or scan response.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
