Update documentation about IC variations. Now SoC supports both
variations A and B and this board is compatible with both.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Convert driver to use new DT_INST macros throughout. Removed per
instance Kconfig symbols and replaced with DT_NODELABEL references
where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace use of Kconfig UART_X symbols by calls to DT API.
Clean driver from symbols definitions
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert driver to use new DT_INST macros throughout. We can remove
various defines from dts_fixup.h now as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We remove the
aliases and use nodelabel instead in the soc_gpio.h to determine the
label for the specific gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. This allows us to
also remove dts_fixup.h that are no longer used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This selects CONFIG_BT_HCI_RAW_H4 which indicates to hci_raw to handle
H:4 header automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes hci_raw to manage RX and TX buffers so its logic don't have
to be replicated on each an every driver/application, it also makes it
simpler to deal with extra headers for H:4 mode since that then can be
done at earlier at buffer allocation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for registering a command extention table which is
used to match incoming commands and then pass the buffer to its
function handler.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds 2 config options which enables hci_raw to work in
H:4 mode and enable it by default automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer are allocated with K_FOREVER should never fail, in addition to
that asserts needs to be enabled and is not worth converting to runtime
check given the use of K_FOREVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_RX_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_ACL_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The unique identifier for this platform is a 96-bit value, where the
upper 56 bits provide an ASCII encoding of the lot number, and the
lower 40 bits provide the wafer number and X, Y position on the wafer.
Extract the value into big-endian form for device-independent
interpretation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No in-tree boards support the NINT signal on an SX1509B IO extender,
so test using custom overlays/configurations for the Particle Xenon
board using an SX1509B breakout board.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
enable the interrupt functionality for sx1509b gpio expander,
when the CONFIG_GPIO_SX1509B_INTERRUPT config is enabled.
The gpio pin used for interrupt should be configured in the
device tree sx1509b node before enabling the interrupt
configuration.
Signed-off-by: Viraaj Somayajula <sviraaj@zedblox.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit reworks the ARM AArch32 non-Cortex-M (i.e. Cortex-A and
Cortex-R) exception handling to establish the base exception handling
framework and support detailed exception information reporting.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds an "extension" header for the CMSIS to provide the
core register access functions and macros that are not currently
available in the CMSIS.
The functions and macros defined in this header should be eventually
added to the upstream CMSIS and, once added, removed in this header.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In the ARM Cortex-M architecture implementation, the concepts of
"exceptions" and "interrupts" are interchangeable; whereas, in the
Cortex-A/-R architecture implementation, they are considered separate
and therefore handled differently (i.e. `z_arm_exc_exit` cannot be used
to exit an "interrupt").
This commit fixes all `z_arm_exc_exit` usages in the interrupt handlers
to use `z_arm_int_exit`.
NOTE: In terms of the ARM AArch32 Cortex-A and Cortex-R architecture
implementations, the "exceptions" refer to the "Undefined
Instruction (UNDEF)" and "Prefetch/Data Abort (PABT/DABT)"
exceptions, while "interrupts" refer to the "Interrupt (IRQ)",
"Fast Interrupt (FIQ)" and "Software Interrupt/Supervisor Call
(SWI/SVC)".
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The exception/fault handling mechanisms for the ARM Cortex-M and the
rest (i.e. Cortex-A and Cortex-R) are significantly different and there
is no benefit in having the two implementations in the same file.
This commit relocates the Cortex-M fault handler to
`cortex_m/fault_s.S` and the Cortex-A/-R generic exception handler to
`cortex_a_r/exc.S` (note that the Cortex-A and Cortex-R architectures
do not provide direct fault vectors; instead, they provide the
exception vectors that can be used to handle faults).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The amount of shared code in exc_exit.S between the ARM Cortex-M and
the rest (i.e. Cortex-A and Cortex-R) is minimal and there is little
benefit in having the two implementations in the same file.
This commit splits the interrupt/exception exit code for the
Cortex-A/-R and Cortex-M into separate files to improve readability as
well as maintainability.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage. We also remove dts_fixup.h defines that
are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Mark all the individual PWMs as disabled in dts and enable the one
explicitly used on the mimxrt1064_evk.dts in the board dts file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a __WARN("Macro is deprecated") to all DT_<COMPAT>_BUS_<BUS> macros
now that all in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a __WARN("Macro is deprecated") to all DT_INST macros now that all
in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
