Create and select the proper module device tree file which loads the
correct radio config for the MGM240P module.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
Add device tree and support files for the Nano Matter board
based on the Silicon Labs MGM240SD22VNA chip.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
This is an X86 specific option and should not appear as generic debug
option.
Fixeszephyrproject-rtos/zephyr#52929
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change defines the "st,stm32-ospi-nor" compatible Node
in conformance to the DTS specifications
Includes the size property (in Bits) of the external memory device
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Replace the slew-rate based method of delaying signals with a more
appropriate I/O delay. Also update the comment to better describe
what we are now doing.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
The PHY is necessary for a high speed USB connection.
Same code as on the closely related lpcxpresso55s69.
Signed-off-by: Fabian Otto <fabian.otto@rohde-schwarz.com>
According to user manual UM3448, spi2 is connected to
the ST Arduino header.
This has been confirmed using the spi_loopback test driver.
Also update documentation.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
This commit enables the Random Nb Generator peripheral
instance (RNG) on the target board nucleo u385rg_q
from STMicroelectronics.
Signed-off-by: Khaoula Bidani <khaoula.bidani-ext@st.com>
By default, enable the SharedMultiHeap allocated buffer on
stm32n6570_dk and enable its usage for LTDC or video buffers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
These settings are used to put the pins in power saving mode
when we enter SUSPEND power mode.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Create a virtual shield to connect an OpenThread RCP radio device with a
host using the UART or SPI bus.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Change the default of the mac address for a few example boards
to use the "unique" option based on the chip unique ID,
instead of random. The RW was chosen because it has HWINFO implemented
currently. RT1050 was chosen as one of the RT boards.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Set regulatory domain to default US for IW610 and RW610 socs
and WW for IW416 and IW612 socs.
Signed-off-by: Abhinav Kulkarni <abhinav.kulkarni@nxp.com>
The utility may be used during development stage to get
ambiq platform specific timing parameters for mspi devices.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
This device driver supports ISSI is25w/lx032/64 series flash.
Only extended SPI mode(1s-1s-1s, 1s-8s-8s, 1s-1s-8s) is implemented.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Adds a common vendor dts file specifying the default partition
layout for nRF54L05-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L15-based cpuapp_ns board targets and updates boards
to use this common file.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L15-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a workaround for partitions on nrf54l10 non-secure devices to
prevent build issues, this needs to be fixed properly when a TF-M
update is done which sets the partition sizes properly
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L10-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
jlink runner works fine for the Pico2, just like Pico1 (rpi_pico).
Copied relevant lines from rpi_pico/board.cmake.
Fixed typo in documentation.
Signed-off-by: Koen Van Herck <koen.v.herck@gmail.com>
Add gpio support for STM32MP257F-EV1 board.
Add the orange (&led0) LED to the device tree and enable GPIOJ.
Add the user button USER2 to the device tree and enable GPIOG.
This step allows building and debugging the blinky and button sample
applications.
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Introduce DeviceTree binding for the STM32MP2 RCC clock controller,
enabling support for STM32MP2-specific clock configuration in Zephyr.
Update Kconfig.stm32 to add a dependency on STM32MP2 configuration,
allowing the use of STM32 LL RCC features when targeting STM32MP2
devices.
Add header for STM32MP2 per peripheral clock definitions.
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Introduce initial board support for the STM32MP257F-EV1. This includes:
- Board metadata (board.yml, stm32mp257f_ev1.yaml)
- Base software configuration (Kconfig.stm32mp257f_ev1)
- CMake build integration (board.cmake)
- Default configuration (stm32mp257f_ev1_stm32mp257fxx_m33_defconfig)
- Minimal device tree (stm32mp257f_ev1_stm32mp257fxx_m33.dts)
- Initial documentation and image for the stm32mp257f_ev1 board.
- OpenOCD configuration files for debugging support.
This enables the STM32MP257F-EV1 board to build and debug a hello world
sample.
Note that other necessary openocd configuration files are added to the
zephyr sdk directory and can be found in the stm-openocd repository[1].
[1]:https://github.com/STMicroelectronics/device-stm-openocd/tree/main
Signed-off-by: Youssef Zini <youssef.zini@savoirfairelinux.com>
Update board document to remove dcache off command under U-Boot as
CONFIG_ARM64_BOOT_DISABLE_DCACHE has been enabled.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add external HSPI flash on STM32U5G9J-DK2
Use external loader to flash it with STM32CubeProgrammer
Signed-off-by: Mathias Markussen <mathias.markussen@st.com>
This adds `tests/drivers/dma/chan_blen_transfer` and
`tests/drivers/dma/loop_transfer` as build tests to any manual Twister
run.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Sets LinkServer as the default runner for the mimxrt1060-evk board,
as the board is configured for CMSIS-DAP by default.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add minimal support for Renesas RZ/V2N-EVK
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Add documentation for am243x_evm and while at it, add the openocd
configuration as well.
Co-authored-by: Mika Braunschweig <mika.braunschweig@siemens.com>
Signed-off-by: Amneesh Singh <a-singh7@ti.com>
