Clean up a left over from GPIO driver factorization.
Definition of GPIO_REG_SIZE and GPIO_PORTS_BASE do not need anymore
to be spread accross SoCs.
Put these definitions directly in STM32 pinmux driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit introduces compile definitions for nrfx, and
lets the build compile in system_nrf9160.c, when building
for nrf9160 SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We want to run coverage on select platforms even if a few do support
that now. Specify which platforms should be enabled using the new option
--coverage-platform
By default we have the posix platform configured. Any additional
platforms can be specified using the option above.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When coverage option is enabled, all C files will have
coverage option enabled. When we enable it for generated files
it adds extra .bss info and other related information.
Since the bss has now increased the perfect hash that was
calculated by gperf is now incorrect. Which is a problem
for userspace enabled systems.
This patch will make sure that the generated C files will be
compiled without the coverage flags. The remaining functionality
remains unchanged.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not all boards can get the coverage reports. The report generation
needs minimum of 64KB SRAM. This patch added support for mps2_an385,
qemu_cortex_m3, qemu_x86. This is just a subset. Also the previously
supported board native_posix is included in this patch.
If a board has 64KB RAM, it can generate reports by just
adding HAS_COVERAGE_SUPPORT in Kconfig.board.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This script will parse the serial console log file and create the
required gcda files.
Usage:
python3 ${ZEPHYR_BASE}/scripts/gen_gcov_files.py -i console_output.log
Add -v for verbose.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from x86 SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from ARM SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support for generating Code coverage reports.
The prj.conf needs to enable CONFIG_COVERAGE. Once enabled, the
code coverage data dump now comes via UART.
This data dump on the UART is triggered once the main
thread exits.
Next step is to save this data dump on file. Then run
scripts/gen_gcov_files.py with the serial console log as argument.
The last step would be be to run the gcovr. Use the following cmd
gcovr -r . --html -o gcov_report/coverage.html --html-details
Currently supported architectures are ARM and x86.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is a custom Gcov implementation. Taking excerpts from gcc
gcc libgcc/libgcov.h and gcc/gcov-io.h.
Ported to zephyr by Ramakrishna Pallala <ramakrishna.pallala@intel.com>
and Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Each time a successfully TCP connection is done, the number of dropped
TCP packets increases by 2. This is happens because when receiving an
initial SYN packet, or an ACK packet following a SYN+ACK packet,
NET_DROP is returned even if there is no error.
Fix that by replacing the two corresponding "return NET_DROP" by
"net_pkt_unref(pkt)" followed by "return 0".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mq_maxmsg and mq_msgsize are defined to be of
type long in POSIX standard. So use long for
variables that hold its value in mq_open().
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Previously there was just "min_ram: 32", which took care about
suitable flash size implicitly. But now we have interesting boards
(e.g. lpcxpresso54114_m0) which tout RAM of 32K and Flash of 64K.
So, become more explicit about Flash requirement for the sample.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit introduces a new Kconfig symbol to signify
that a CPU implements the Nordic-specific security
attribution unit. The symbol is meant to be selected
by Nordic SoCs that implement the System Protection
Unit (SPU) peripheral.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the nRF9160 fixup and the source files
for SOC and MPU boot configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the Kconfig file structure for nrf9160
SoC in the Zephyr tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Support musca board as a variant, it is a Cortex-M33 based SoC.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a required cast for the size calculation utilizing
pointer arithmetic. The stack_obj needs a cast to u32_t. This was
caught using a newer compiler.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds a serial driver for the ARM PL011 IP block.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SAMD2x series have available the Optional Vector Table Offset Register
(VTOR). If this option is not selected, SCB->VTOR is not configured
properly and the application hangs if it's located in an offset
different than 0.
Removed select CPU_CORTEX_M from SAMD20, as it's already selected by
select CPU_CORTEX_M0PLUS
Signed-off-by: Miguel A. Borrego <jimjim17@gmail.com>
tests: Modify tests to use DEVICE_AND_API_INIT()
Modified samples/tests drivers to use DEVICE_AND_API_INIT() instead
of deprecated DEVICE_INIT() api
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Renaming Kconfig.nrf5 to Kconfig.nrf in the wake of extending
the use of the nRF clock control driver to both nRF5 and nRF91
SOC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In driver and application code use the new device-tree values produced
by standard compatible-instance bindings.
As this code may be used as an example add a comment describing how the
binding instance number cannot be reliably used to distinguish multiple
instances.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Zephyr has been using "i2c,eeprom" for the compatible property. This is
inconsistent with the property documentation which expects
"manufacturer,model" to be used.
The Linux standard compatible name for I2C EEPROMs is "atmel,at24". The
standard for SPI EEPROMS is "atmel,at25". We don't have support for the
latter, but change the name for the former.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In the wake of 9cbe468a470fe6a103557d4352d37604a632b2fe we need
to update the nomenclature of DT_FLASH_DEV_NAME macros.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed arg parsing so you can invoke the script and only generate the
include file or conf file as desired.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
