Incoming updates to the nRF clock driver require some extra enum
definitions from the nRFx HAL which were not available in HW
model versions before 1.4 => update it.
Also as the nrf52_bsim does not yet support DTS, include a define
for the clock IRQ interrupt number (as the new clock driver will
be using the DTS macro instead of the nRF MDK value.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add information about image size recommendations, and add some more
details about other reST features such as tables. Also added a flow
picture to the documentation generation doc.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Prolong by 1 second the BT encrypted connection test, to ensure
there is enough time for the link itself to be encrypted.
Before this change the key was exchanged, but the 1st notification
(pass condition) was received before the link itself was encrypted.
With this change we wait for 1 notification more (1 second more),
and during that extra second the link is actually encrypted.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
board.h does not exist for any of the (official) Nordic nRF
boards. This commit corrects the information about the source
ofthe button and LED definitions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove redundant inclusion of nrf.h (included by nrfx.h).
Group the logging/log.h inclusion together with the other
inclusions in this file (make inclusions' list look as in
nrf9160/soc.c).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the locally-defined macros which define the base
addresses for XICR, Peripheral space and PPB. The macros
are not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use built-in by default. We do not use external library of QMSI anymore
and rely on integrated HAL. Remove this option and simplify HAL
configuration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds an fxos8700 device tree node to the mimxrt1050_evk. The sensor
interrupt gpios require a board modification to be used and conflict
with Ethernet and LCD signals, therefore their pinmuxes are not
configured.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux lpi2c shim driver and pin muxes on the mimxrt1050_evk
board. Updates the board documentation and yaml supported list
accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux lpi2c shim driver and clocks on all imx rt socs when
the i2c driver interface is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux lpi2c driver to adapt it to the zephyr
i2c interface. This shim driver leverages heavily from the mcux i2c shim
driver because the MCUXpresso SDK provides similar APIs for the i2c and
lpi2c peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The z_set_timeout_expiry() function was added in part to simply the
locking strategy, but it missed a case where a function it was calling
was re-locking the same spinlock. It "works"[1] in uniprocessor
environments, but can be a deadlock in SMP.
Fix this by moving the meat of the function to an unlocked utility,
use that locally, and turn the entry point into one that does locking.
Actually this only gets called from idle now, which is a use case that
will go away when TICKLESS_IDLE is removed as a separate feature (once
you know all timeouts are set tickless, you don't need to set it from
the idle entry at all).
Discovered via lucky inspection.
[1] It doesn't work. It releases the lock prematurely at the end of
the inner block. But in practice this wasn't discovered.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The SimpleLink wifi driver enables the Fast Connect method of
WiFi provisioning, which allows the network coprocessor to
reconnect to a previously connected Access Point (AP) on
startup.
Previously, if Fast Connect failed to connect, any network
socket applications would inevitably fail, as there would have
been no wifi connection.
This patch adds a configurable timeout for the Fast Connect
feature, after which timeout, an error is logged informing
the user to manually reconnect to an AP.
Reconnection is typically accomplished by separately running the
wifi sample shell program.
Fixes: #11889
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The Intel S1000 board has a SPI flash that isn't directly MMIO
addressable. For this case we shouldn't generate CONFIG_FLASH_SIZE or
CONFIG_FLASH_BASE_ADDRESS.
We use the heuristic of assuming if the flash node #size-cells is 0, its
a SPI flash. Than if the parent node (SPI controller) has only a single
reg element we assume its a non-MMIO addressable SPI flash. If there is
more than one reg element we assume the last reg element is the MMIO
address region for access to the flash.
Fixes#12530
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
While trying to catch crashes after test completes, do not keep
extending the timeout which might lead to and endless loop and not
getting out based on set timeout.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Commit aad21ecb31 introduced an incorrect
pattern of handling ADC sampling requests with invalid parameters in
both nRF ADC drivers. After discarding such request, the drivers do not
release properly the access lock and therefore become unusable.
Unfortunately, this pattern were later on copied in all other ADC
drivers in the source tree.
This commit adds the proper lock releasing in all the affected drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds a test case checking if ADC drivers can work properly
after discarding an invalid sampling request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Apart from normal customizations of vendor specific parameters in ADC
configuration used in the test, a few more changes in test cases were
also introduced in commit 1bfa34f4fb.
This resulted in some parts of ADC API (like zero interval between
consecutive samplings) not being tested at all. This commit restores
the original behavior of the test cases (with added comments that
zero intervals are intentional).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently only nRF drivers need assignments of analog inputs to ADC
channels (ADC_CONFIGURABLE_INPUTS Kconfig option is activated only for
these drivers). Hence, there is no need to define ADC_xxx_CHANNEL_INPUT
labels for any other ADC driver as they will be ignored anyway.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Due to a copy-paste mistake, this driver used an incorrect module
name (adc_mcux_adc16) in log messages.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These were being truncated to 32-bits, and only 8
hex digits were supported.
An extraneous printk() at the beginning of the test
which was not being tested in any way has been removed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
1. Update shell documentation according to proposals in
PR #12437 (Extend shell meta keys).
2. Fix lines exceeding 80 characters limit.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
