For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim in
the documentation, and enable this tests by default in
native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for low power mode on the G1120B0MIPI using the RT595. This
configuration is tested via a testcase in samples/drivers/display, which
should validate that the display can be driven by the RT595 when
CONFIG_PM and CONFIG_PM_DEVICE are set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds support for using a connected host to
broadcast audio via USB Audio.
Offload LC3 encoding to separate thread.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
PR #63332 introduced a change to the LZ4 sample that set the malloc
arena to an unnecessarily large size.
After testing on native_posix, qemu_m3, and esp32s3_devkitm_appcpu, it
would appear 24K is a much more reasonable (and sufficient) size.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Let's replace the references to native_posix with native_sim,
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
There are more ipc_service backends that supports multiple endpoint.
This sample can be used for any of those backends, so this commits
makes the sample more generic. The default backend it still icmsg_me,
but now, the sample has files and instructions for icmsg_with_buf
backend.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On SoC series s32ze, Zephyr application cannot run with MPU
disabled, skipping relevant samples/tests
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Introduce a streaming API that uses the same data path as the async API.
This includes features to the decoder:
* Checking if triggers are present
Adding streaming features built ontop of existing triggers:
* Adding 3 operations to be done on a trigger
* include - include the data with the trigger information
* nop - do nothing
* drop - drop the data (flush)
* Add a new sensor_stream() API to mirror sensor_read() but add an
optional handler to be able to cancel the stream.
Signed-off-by: Yuval Peress <peress@google.com>
topic#sensor_stream
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Remove nocopy feature from icmsg_me backend.
The backend is not meant to be used to send big
data chunks thus no-copy feature is removed.
If one wants to use no-copy it is recommended
to use icmsg_me only for control messages while
allocator will shall be written seperately.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
The current main stack size is not enough for any platform.
This commit stack size was checked for nrf52840 and nrf5340.
Everything works.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Reduce the heap and stack sizes needed for the shell loader sample app
so more devices may try it out.
Tried on a mimxrt1010_evk and noted the total ram usage was
approximately 44000 bytes. Prior to this change the mimxrt1010_evk was
unable to run the sample as the bss section overflowed the ram size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
For littleFS, the fstab entries in DTS are ignored currently.
So remove the overlay entries for the same. Also fixed-partitions
can't be used for sdmmc-disk. So remove the same. We just need to
have sdmmc node with zephyr,sdmmc-disk compatible string to have
littleFS working on disk.
build littleFS sample as follows:-
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf \
-DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add an initial test based on the broadcast audio source/sink samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
sink received, and if over a threshold, passes the test.
This test can be expanded after to cover more functionality from
these samples.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples,
as well as explicit overlays for the nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix controller configuration overlay used when
building the controller (for nrf52 targets),
so the sample can connect to the source and get
audio through.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of handling some of the configuation thru
board overlays let's handle it thru the sample Kconfig
file, which reduces the amount of duplicate lines.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Disable the quadspi mpu region of the nucleo_f746zg
when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the stm32-ospi-nor or stm32-qspi-nor compatible to run the sample
on stm32 boards without jedec,spi-nor compatible.
No more config file needed to get the jedec ID and SFDP info from the
external quad- or octo-SPI flash of the stm32 disco boards.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the required conf and dts overlays required for the
application on stm32h747i-disco board.
Also moved CONFIG_SDMMC_STM32_HWFC option from prj_blk.conf to
nucleo_h743zi_blk.conf as that is STM specific option.
Build the application as
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/littlefs/ -- \
-DOVERLAY_CONFIG=boards/stm32h747i_disco_m7.conf -DCONF_FILE=prj_blk.conf
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
STM32L562 Discovery kit is not compatible with Bluetooth over USB
application.
Add missing information related to the BLE capability of this board.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Change the integration target to something more meaningfull,
i.e. something users are more likely want to try it on,
and therefore in which it is better to do more testing.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the qemu targets for the controller configuration.
As those do not support the controller, it is just meaningless.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide configuration for native_sim instead of native_posix
and enable it in the samples.yaml
native_posix is being deprecated in favour of native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a test based on the unicase client/server samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
client received, and if over a threshold, passes the test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Due to this bug:
https://github.com/zephyrproject-rtos/zephyr/issues/64574
We need to increase the number of L2CAP Tx Buffers
so this sample can be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a configuration for the sample we can use
by default with the ISO capable hci_rpmsg controller
sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
So that for both the simulated nrf5340 and real HW nrf5340dk
we build both network and application core images.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the simulated nrf5340 and nrf52 in these samples.
And enable building in twister both for these and for the
already supported nrf5340dk.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix build for IMXRT11xx SOCs. The ARM MPU header was missing for the CM4
board overlays, add the required header so the sample can build.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
README now cross-references the lora receive sample
so that both can be used together more easily.
Signed-off-by: ingram weeks <ingram.weeks@gmail.com>
In 85bb2624bc
init_lc3()'s prototype was changed to return an int,
but the code was not updated to return something !=0
on all errors, or 0 on error.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The lc3_enable code was refering to a variable that does not exist.
Fix it.
Issue was introduced in 9c47eb924f.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit adds a sample which configures a GNSS modem
to enable all available systems, registers callbacks to
the GNSS data and satellites callbacks, and prints the
GNSS data and satellites from the callbacks when invoked
using printk.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The broadcast audio samples (broadcast_audio_sink
and broadcast_audio_source) are sending mock data,
the apps are improved by using the LC3 module as
the unicast audio samples do.
Signed-off-by: Ping Wang <pinw@demant.com>
Suggest users to use "west config manifest.project-filter +canopennode"
instead of "west config manifest.group-filter +optional" in the sample
documentation to avoid pulling in unrelated, optional modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert this sample application build to sysbuild,
and add support for the nrf5340bsim target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable building this sample on the simulated nrf5340 net
core.
Note that this sample does nothing on its own, as it
requires a companion application core sample to driver it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PM should not be enabled by default at the soc level. This is an
application decision and not a platform decision whether to enable or
disable PM features.
Enabling PM by default will result in descripencies and test scope and
failures in tests that do not account for PM being enabled.
Fixes#60359
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert this sample application build to sysbuild,
and update documentation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Make sure DEBUG is enabled if this test is run in CI.
Also re-instantiate CONFIG_PM=y which was abusively removed in a previous
change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Aliases, including usbc_port0, start counting from zero. This meant
that the DT alias is inconsistent with the port numbering in the
samples. Change the numbering scheme to start from zero to make this
consistent.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Samples sometimes need to identify a default USB-C port. Instead of
hard-coding a node label, use the usbc-port0 alias to point to the
correct node.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Fixes an issue whereby the application init will stall if USB init
failed if it's already been setup, this is likely due to USB CDC
being enabled in which case the failure can be ignored
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The sample was at the same time filtered for the whole
posix architecture and had native_posix as its integration platform.
This is selfcontradictory.
In any case, this sample cannot run in native_posix but
can run in native_sim.
So let's fix the filtering.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample shows how to use flash_mmap() call to enable custom flash
area to be mapped into data region.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
One of the nrfx_uarte event structure members was renamed,
so the sample code has to be aligned.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add installation instruction for adding nanopb to the west workspace.
This is required because it is optional and not installed by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Two substests (userspace and rtt) cannot be run in the posix
architecture.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These samples & tests cannot be run in this architecture
as it does not support userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In the iso_receive sample, the semaphores were not reset in
each iteration.
This caused the ISO receiver to act incorrectly and cause
issues with some controllers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample enables CONFIG_NET_IPV4_MAPPING_TO_IPV6 and then
turns off IPV6_V6ONLY option which allows it to support both
IPv6 and IPv4 using the same socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the west invokation. "-t" is added automatically
to the run goal, otherwise we get a "-t -t" command.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Prevent infinite loop inside interrupt handler when there is incoming
data available and ring buffer is full.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add ADC support for longan nano.
Tested using samples/drivers/adc. Also added longan_nano.overlay
and updated documentation.
Signed-off-by: Maxin John <maxin.john@gmail.com>
Add test script that uses same configuration that the
interoperability test.
This is only checking that unsecure client registers and
responds to a GET query.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Remove gdbstub sample (samples/subsys/debug/gdbstub) as duplicated
by a test (tests/subsys/debug/gdbstub).
Update the GDB stub documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Clone samples/subsys/debug/gdbstub to tests and convert it back
to a build-only sample aligned with documentation.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Enable LVGL widgets demo within Zephyr. This demo requires additional
stack and heap space in order to execute correctly, so raise the stack
and heap size to enable it to run.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The old Makefiles which can be used to build this samples
directly as Linux apps and the description in the READMEs
could be quite missleading.
Building this apps in this way has nothing to do with the
Zephyr native_posix/sim targets. This is about building
them as actual Linux applications without Zephyr or any
HW models.
So let's rename the Makefiles and change the description
in the docs to avoid confusion.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The flash sample and flash shell have implementations that differ
providing similar features.
This commit removes all the code in main.c, only `main()` remains to
reduce redundancy.
Features or improved implementations has not been merged into the flash
shell in this commit.
It should be possible to do in future commits if desired.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add additional RX stats for the BAP broadcast sink so that a
user can easily follow how well the RX is working, and
for several streams.
This also adds some additional logging to better see
what we are syncing to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This application is no longer needed as we have removed
the automatic startup support which was used by this sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds a new sample for LVGL that displays a real-time chart for
accelerometer data acquired from &accel0 sensor.
This also adds the appropriate overlays so that the sample can also run
on native POSIX and native sim using emulated BMI160.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Refactor the codec_cfg_get_frame_duration function to return the
assigned numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Creates a generic sample application that executes a simple charging
task loop capable of completing a basic charge cycle.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Rename the Kconfig option from BT_ISO_ADVANCED to
BT_ISO_TEST_PARAMS to more explicitly denote that it
enables support for using the ISO test parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When relocating section symbol addresses the value where the
relocation is to be written is an offset into the section to load.
Simply rewriting it with the section address is not enough, we need
to write the address of the section with the offset into it.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In the broadcast_audio_sink sample there are two pointers defined,
both referencing the same address. We reduce this to one pointer
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The commands showing west build had -b None which isn't quite right. Add
a :board: property with the tdk_robokit1 as its what I tested on myself.
Also noted that llext isn't supported on every architecture but
intentionally left this a bit vague as updating this little comment
every time something is added seems like a recipe for doc rot.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
When using multiple streams the seq_num provided to the
controller would be incorrect as we used a single global
seq_num rather than a proper seq_num per stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update babblesim tests for testing chaining for advertising to ensure that
we spill over to the next PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Follow up on commit f67dd39bb2
("drivers: ramdisk: use devicetree to instantiate RAM disk").
Unfortunately, the additional argument must be passed for the default
build. Using app.overlay would not always help since the sample has few
board-specific overlays.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update to a fixed percepio tree, which allows the build to pass for valid
version numbers with 0 being one of the version number components.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The percepio build seems to have a bug and fail whenever the major, minor
or patchlevel numeric value is 0:
Invalid version specified: major: 3, minor: 5, patchlevel: 0
Disable the sample until a proper fix is available.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a sample application that can be used for trying out llext
with the shell. The docs cover how to load a hello world ELF
on to the device, assuming its an arm v7 architecture.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The conn_mgr_monitor.h was not included so the compilation
gave warning for missing conn_mgr_ignore_iface() function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the function name from codec_cfg_get_chan_allocation_val
to just codec_cfg_get_chan_allocation, and add
codec_cfg_set_chan_allocation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Demonstrate user function codes with a simple example with a user defined
fc that maps to a function that just increments a counter every time it's
read.
Signed-off-by: Henrik Lindblom <henrik.lindblom@vaisala.com>
mps2_an385 was excluded from networking tests, therefore can no longer
be used as an integration platform. Replace it with qemu_x86.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Describe the code sample using zephyr:code-sample directive to help
with making it easier to find from API reference.
Also cross-referenced main bindesc page from the sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Improved the README.md of the hello_bindesc sample by adding a
note about non existing bin files and referencing the relevant
parts of the documentation.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
The original idea of z_current_get() was to be the counterpart
of k_current_get() when thread local variable for current has
not been initialized if TLS is enabled, otherwise they are
the same function. Now since z_current_get() is being used
outside of core kernel, rename it under kernel namespace so
other subsystem can conceptually use them too.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Refactor the codec_cfg_get_freq function to return the assigned
numbers value, instead of a converted value, but with
support for converting the value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is an alternative implementation of hci_uart. The new sample
differs from the existing sample in that it uses the async UART API
instead of the interrupt driven API.
Included in this commit is a new test for HCI UART flow control. It's
enabled for hci_uart_async. The test can excercise also the existing
hci_uart sample (with some minimal changes to allow compiling in the
mock controller and test suite). The existing hci_uart sample currently
fails the flow control test.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value property type when fetching
properties. Separating off the property types from the property values
themselves also allow an array of property types to declared as static
const.
Break up fuel_gauge_property struct into a fuel_gauge_prop_val union and a
fuel_gauge_prop_t property type as inputs into fuel gauge API functions.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value status code when fetching
multiple properties isn't particularly wanted or needed. It was largely
considered not worth the additional maintenance to have the extra per
property error information.
Remove the status field from the fuel_gauge property value structs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The fuel_gauge_get_prop() function prototype declares a function that
retrieves multiple fuel gauge properties at once. The naming suggests it
ought to fetch a singular property at a time. Moreso, some clients may just
want to fetch properties one at a time and may feel uncomfortable using a
prototype for fetching multiple properties when wanting to fetch them one
at a time.
Modify fuel_gauge_get_prop() to fetch a single property and add
fuel_gauge_get_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
After esp32 board was split into several different models,
rpmsg sample code was missing the change. Make esp32_devkitc_wrover
the default option.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Changes the Kconfig symbols for the sys_heap based memory management option
and removes the notion of `BLOCKS` with a more concise single
`LV_Z_MEM_POOL_SIZE` option. Also adds `LV_MEM_CUSTOM` to the lv_conf.h,
since in any option the memory management is considered to be custom.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Update the TLS part of the big_http_download sample to reference the
currently used server used for file download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The download server that the origin server redirects to seems now to
use different certificate (signed by a different root CA). Therefore
add the additional root CA to the certificate list and refactor the
sample code a bit to allow to easily extend/replace certificates in the
future.
Bump the mbed TLS heap size a bit to accommodate the extra registered
certificate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added functionality to change the syslog server's
ip address at runtime as well as sample for
syslog network backend
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Send a fw ready reply message as soon as possible.
This is usually used on host side which is waiting
for this message in order to establish the
communication with the remote processor - see
imx_dsp_rproc driver from Linux.
This can be enabled by IPM_IMX_FW_READY_REPLY config,
which is by default N.
Set CONFIG_IPM_IMX_FW_READY_REPLY as Y for
openamp_rsc_table sample, running on nxp_adsp_imx8m.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The table of contents for the samples' catalog was showing too many
levels for some sections.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Excluded cy8cproto_062_4343w and cy8cproto_063_ble from
samples/userspace/shared_mem sample due to a hardware
limitation with number of available MPU regions.
Sample throws warning:
`num_parts of 4 exceeds maximum allowable partitions (2)`
With the Cortex M4 on the boards only 2 mpu regions are left
and available to be used with the sample.
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Update all Nucleo shield samples and references to them so that they
use the new zephyr:code-sample extension.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Running the HTML code through W3C Validator revealed several issues with
the markup that this commit fixes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update webusb README with recent changes after index.html was moved to
sample from the external repository.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
tflite-micro now uses MicroPrintf instead of MicroErrorReporter. Update
the samples to use this function instead. AllOpsResolver is now removed
from tflite-micro. AllOpsResolver was also removed in the latest
tflite-micro. Use MicroMutableOpResolver and only include the kernels
used instead.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The stack guard report this testcase has the stack overflow issue. To
fix the issue, slightly increse the stack size.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The README file for led_xec sample had several formatting issues
causing it to render very poorly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Moving from APPLICATION level to POST_KERNEL and keeping both parent and
child on the same level is causing problems, so fix this by putting them
on different priorities in POST_KERNEL.
Also, this sample runs fine in qemu, so make it the integration
platform.
Fixes#62772
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This migrates the subsys code samples to the new Sphinx code-sample
extension, making it easier to find relevant samples when browsing
API reference.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix missing Coded PHY implementation conditional compile
causing compile error when disabling Coded PHY support in
SoCs that have radio that support Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed pinout in adc overlays to align with board
Allowed adc driver sample
Added overlay for gpio_basic_api test support
Added overlay for i2c_api test support
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Replace the BT_AUDIO_CODEC_LC3_ID macro with the
BT_HCI_CODING_FORMAT_LC3 as there is no reason to
define and use the LC3 ID different than the other
allowed codec IDs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Demonstrate use of the Raspberry Pi Pico PIO SPI driver.
Added rpi_pico test cases to sample.yaml
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
Modify the bt_bap_broadcast_source_reconfig to use the same
parameter struct as bt_bap_broadcast_source_create so that
the two are more similar, since they both set the same values.
This allow for full control of which subgroups and stream
are updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Try to catch issues related to platforms and HAL changes using this
basic sample. We have the same flag for a kernel test, but this is
skipped if no kernel changes are present in the PR, so we were missing
some coverage of platform related changes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the new code-sample directive and roles to document the video
capture samples so that they show up as "Related samples" when browsing
the API documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use the defind value, BT_APPEARANCE_WEARABLE_AUDIO_DEVICE_EARBUD,
instead of the hard coded "magic numbers".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample did not properly include the source
context in the advertising data.
It also set different contexts for PACS and the advertising data
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The fuel gauge API uses separate get/set property structs to indicate what
properties are readable or writable. This lead to duplication in property
names and potential confusion for new users of the API. See issue #61818.
In addition to above, drivers already determine at runtime if a property is
supported for read or write actions.
Join the get/set fuel gauge property structs as a single struct.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The mr_canhubk3 board enables by default an off-chip watchdog that must
be serviced to avoid triggering a reset and cannot be disabled on a
per-test basis.
The amount of data printed on this test prevents to initialize the
on-board watchdog within the expected window, causing a board reset.
Hence do not run the test on mr_canhubk3 board.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert the driver to a dt-based device. Also update Kconfig so that it
depends on the right compatible being enabled, initialize in POST_KERNEL
(APPLICATION should not be used for devices) and remove one redundant
include.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Introduce a helper function zephyr_nanopb_sources to generate
source files and add these to a target.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This is the final step in making the `zephyr,memory-attr` property
actually useful.
The problem with the current implementation is that `zephyr,memory-attr`
is an enum type, this is making very difficult to use that to actually
describe the memory capabilities. The solution proposed in this PR is to
use the `zephyr,memory-attr` property as an OR-ed bitmask of memory
attributes.
With the change proposed in this PR it is possible in the DeviceTree to
mark the memory regions with a bitmask of attributes by using the
`zephyr,memory-attr` property. This property and the related memory
region can then be retrieved at run-time by leveraging a provided helper
library or the usual DT helpers.
The set of general attributes that can be specified in the property are
defined and explained in
`include/zephyr/dt-bindings/memory-attr/memory-attr.h` (the list can be
extended when needed).
For example, to mark a memory region in the DeviceTree as volatile,
non-cacheable, out-of-order:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_VOLATILE |
DT_MEM_NON_CACHEABLE |
DT_MEM_OOO )>;
};
The `zephyr,memory-attr` property can also be used to set
architecture-specific custom attributes that can be interpreted at run
time. This is leveraged, among other things, to create MPU regions out
of DeviceTree defined memory regions on ARM, for example:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-region = "NOCACHE_REGION";
zephyr,memory-attr = <( DT_ARM_MPU(ATTR_MPU_RAM_NOCACHE) )>;
};
See `include/zephyr/dt-bindings/memory-attr/memory-attr-mpu.h` to see
how an architecture can define its own special memory attributes (in
this case ARM MPU).
The property can also be used to set custom software-specific
attributes. For example we can think of marking a memory region as
available to be used for memory allocation (not yet implemented):
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_NON_CACHEABLE |
DT_MEM_SW_ALLOCATABLE )>;
};
Or maybe we can leverage the property to specify some alignment
requirements for the region:
mem: memory@10000000 {
compatible = "mmio-sram";
reg = <0x10000000 0x1000>;
zephyr,memory-attr = <( DT_MEM_CACHEABLE |
DT_MEM_SW_ALIGN(32) )>;
};
The conventional and recommended way to deal and manage with memory
regions marked with attributes is by using the provided `mem-attr`
helper library by enabling `CONFIG_MEM_ATTR` (or by using the usual DT
helpers).
When this option is enabled the list of memory regions and their
attributes are compiled in a user-accessible array and a set of
functions is made available that can be used to query, probe and act on
regions and attributes, see `include/zephyr/mem_mgmt/mem_attr.h`
Note that the `zephyr,memory-attr` property is only a descriptive
property of the capabilities of the associated memory region, but it
does not result in any actual setting for the memory to be set. The
user, code or subsystem willing to use this information to do some work
(for example creating an MPU region out of the property) must use either
the provided `mem-attr` library or the usual DeviceTree helpers to
perform the required work / setting.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use the new code-sample directive and roles to document the filesystem
samples so that they show up as "Related samples" when browsing the API
documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a MBOX driver wrapper around the NXP MU, simular to
the existing wrapper around the NXP S32 MRU. This allows Zephyr IPC
to work based on the MU, on a number of NXP boards.
Also update the SHA of NXP HAL to enable the Kconfig for this driver.
Signed-off-by: Yicheng Li <yichengli@google.com>
To achieve minimal power consumption, only the console (ie UART) needs
to be suspended. Note that this is a temporary workaround, UART driver
should be using device runtime PM so that this is not needed.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Wake-up from pin is already supported when configuring GPIO interrupt as
GPIO_INT_LEVEL_ACTIVE, so there's no need to resort to HAL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fixtures in pytest-twister-harness plugin are moved to one
file to simplify adding new fixtures in the future - no
need to add pytest_plugins entry and register asserts.
Moved also shell fixture from sample dir, because that
fixture can be reused in new tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This modification frees up around ~10kB of RAM and make sample code
working again.
1) Reduced net packet size and count.
2) Increase Wi-Fi heap to avoid memory allocation failure.
3) Keep log as minimal.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add RK055HDMIPI4M specific testcase to LVGL. This allows LVGL to be
verified on the RT1170 and RT595 EVKs from NXP, which support LVGL using
this shield.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Instead of depending on the nRF5340 DK, use a path specific to just
the nRF5340 SoC and get the size of the external flash in this case
from devicetree so that the sample could be easily run on other boards
based on the nRF5340 SoC (after just adding proper overlays).
On the occasion, correct the attributes of the EXTFLASH memory region.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the Nordic QSPI NOR flash driver instead of the specific code
for the nRF5340 DK to initialize the external flash chip for XIP.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds a zephyr,lvgl-encoder-input compatible to the native_posix board
overlay and the required code to control an arc widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
It doesn't make sense to keep the aarch32 directory in the
'arch/arm/core' directory as the aarch64 has been moved out.
This commit introduces the following major changes.
1. Move all directories and files in 'arch/arm/core/aarch32' to
'arch/arm/core' and remove the 'arch/arm/core/aarch32' directory.
2. Move all directories and files in 'arch/include/aarch32' to
'arch/include' and remove the 'arch/include/aarch32' directory.
3. Remove the nested including in the 'arch/include/kernel_arch_func.h'
and 'arch/include/offsets_short_arch.h' header files.
4. Change the path string which is influenced by the changement 1
and 2.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
- Updated basic samples READMEs to use the new zephyr:code-sample::
directive. Dropped "-sample" suffix that's not required anymore now
that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
role. Checked and updated the wording of said references to account
for the fact that samples should not have "... sample" in their name
anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is a private kernel header with private kernel APIs, it should not
be exposed in the public zephyr include directory.
Once sample remains to be fixed (metairq_dispatch), which currently uses
private APIs from that header, it should not be the case.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
cipher_list and sec_tag_list are used only with zsock_setsockopt
in MQTT. For that use, they can be const (and potentially kept
in flash memory).
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
Avoid to build with debug log level enabled and instead register the
test log modules with debug level.
mr_canhubk3 board will fail to initialize the on-board watchdog within
the expected window triggering a reset, due to the amount of log
messages being printed. Other boards may face similar issues.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Added lvgl-pointer definition in devicetree, to enable
touch-support in lvgl applications.
Kscan support has been removed from m5stack_core2 as this was just a
temporary thing.
Has been tested with lvgl hello world sample.
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
Use the new code-sample directive and roles to document the zbus samples
so that they show up as "Related samples" when browsing zbus API.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit adds a callback to the button to reset the counter when the
button is pressed. The button is automatically created when lvgl
pointer or kscan support is enabled. The same reset functionality was
already available for possible gpio button.
Please make sure to define a zephyr input device in device
tree (e.g. "zephyr,lvgl-pointer-input").
Signed-off-by: Martin Kiepfer <m.kiepfer@teleschirm.org>
Google Cloud IoT Core has been retired on August 16, 2023.
Removed the sample and the link to it in a previous release note.
Added a redirect to other IoT cloud samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Exclude qemu_arc_hs5x from the test, seems to fail since f0daf90. Other
ARC platform works so let's exclude this one while the issue is
investigated.
Link: https://github.com/zephyrproject-rtos/zephyr/issues/62405
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
32a9d13d61
introduced a new required tag for this test
which the integration platform does not "support"
causing the testplan generation to error out.
Fix it by removing the offending tag from the test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The previous design with dedicated bits in the structure required a
user to explicitly set each bit.
Using one flags variable allows to extend the features more easily
in the future and avoids breaking existing code.
This change is particularly useful for the FDF and BRS flags required
for CAN-FD support.
See also previous similar change for the CAN driver in
f8a88cdb27
Signed-off-by: Martin Jäger <martin@libre.solar>
To avoid confusion having both a 'tfm' and a 'trusted-firmware-m' tag,
remove the old 'tfm' tag entirely. Any external test frameworks that are
using the 'tfm' tag will need to be changed to account for this.
Signed-off-by: David Brown <david.brown@linaro.org>
In addition to running the tfm tests when the trusted-firmware-m module
changes, most of the tests also use MCUboot, which comes from our module.
Add the mcuboot tag to each of these tests, except for the single test that
explicitly builds without using MCUboot.
Signed-off-by: David Brown <david.brown@linaro.org>
A recent change #61718, adds support to the twister build to check for
manifest changes, and run tests using tags based on the modules that have
changed. The tfm tests have an existing tag `tfm` to select these tests,
but the above patch uses a tag named after the module, trusted-firmware-m.
To make this work, add `trusted-firmware-m` in addition to the existing tag
`tfm` so that these tests will run whenever the tfm module is updated.
Signed-off-by: David Brown <david.brown@linaro.org>
zephyrproject/zephyr/samples/philosophers/src/main.c: In function
'philosopher':
zephyrproject/zephyr/include/zephyr/sys/__assert.h:44:52: warning:
format '%u' expects argument of type 'unsigned int', but argument 2 has
type 'stack_data_t' {aka 'long unsigned int'} [-Wformat=]
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In this board, there are eight PWM channels from
EMIOS 0 CH0 --> EMIOS 0 CH7 that can be used to
generate PWM pulse to outside of the board.
Moreover, there are three RGB leds that can use
PWM pins for blinking, faded leds
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
This variable was originally provided for two indended purposes:
* Let users manually add a new image in a desired order in the list.
* Let users set build-only images, which are excluded from the list.
Given the recent additions of the `sysbuild_add_dependencies()` function
and the `BUILD_ONLY` parameter, `IMAGES` should be considered obsolete.
Furthermore, the list of images added to sysbuild should be updated
automatically when calling `ExternalZephyrProject_Add()`. This is now
possible by using a GLOBAL property internal to sysbuild.
With that, the `IMAGES` variable can be removed. Its existing usage for
image ordering is replaced with `sysbuild_add_dependencies()` treewide.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
After adding the lvgl pointer device into the board dts the custom overlays
are not needed anymore.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The logs were not visible when an assert fired on the controller and
`CONFIG_BT_HCI_VS_FATAL_ERROR` was not set.
Putting the logs in panic mode before entering the infinite loop fixes
that.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Update build documentation for openamp sample, to reflect that sysbuild
is required when building this sample. Sysbuild is needed to build both
core images in one step.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
k_cycle_get_32() expands to RTC->COUNTER in nrf_rtc_counter_get(),
sys_clock_hw_cycles_per_sec() expands also properly.
Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>
This sample uses the DEVICE_DT_GET_ONE(COMPAT) to select the ps2 device
for a specific chip. This commit changes it to use the aliases to
let more chips which support the ps2 driver can build this sample.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This commit adds a sample application which demonstrates how
to use the new driver and modules. The sample uses power
management to turn on the modem, uses network management
to wait for L4 connected, then uses DNS to get the IP
of the server running the python script found in the
server folder, which echoes back data recevied to it.
A packet containing psudo random data is then sent to
the server, which the echoes it back. To validate the
capability of the driver to restart the modem, the
modem is restarted, and the packet is sent again.
The server is hosted by linode, and uses the domain
name test-endpoint.com
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Config CONFIG_NATIVE_UART_0_ON_STDINOUT=y should be applied only for
posix architecture platforms.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Create helper class Shell which can be used in tests which require
interaction with shell application.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add readlines_until method to DeviceAdapter class to simplify using
adapters in tests by give user possibility to read output from device
until following conditions:
- provided regex was found
- provided number of lines was already read
- timeout was occurred
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Select and place common code of three adapters (HardwareAdapter,
BinaryAdapterBase and QemuAdapter) into basic DeviceAdapter class.
Introduce new way of reading device output by run separate thread which
try to read device output and place it into internal python queue.
Thanks to this, now it is possible to create readline method for all
adapters, which can be unblock when timeout occur.
Collect all common steps which have to be done before setup device in
launch method. The same was done for teardown operations which were
placed into close method.
Additionally some protection mechanisms were introduced to prevent for
undesirable side-effects when user could try to launch to already
launched device or try to send some data to disconnected device.
iter_stdout method was replaced by two new methods: readline and
readlines. To make it possible to remove all read output from internal
buffer (queue), clear_buffer method was introduced.
Also unit tests were rewritten to work properly with current version
of adapters.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
- Remove unnecessary includes
- Remove redundant definitions (sample is not portable anyway)
- Use printf
- Check for device readiness
- Do not check for zero ticks (not possible for the given
timeout/driver), also, driver should likely error for such case anyway
- Check for all error codes
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Remove the qos field from
bt_cap_unicast_audio_start_stream_param as it was not used.
The QOS values are set when creating the unicast group,
and not when starting the streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the `CONFIG_ZBUS_RUNTIME_OBSERVERS_POOL_SIZE` with the
`CONFIG_ZBUS_RUNTIME_OBSERVERS` and add the heap. Add user_data to hello
world sample iterator functions.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Adds a lvgl-button-input pseudo device to the lvgl sample. Triggering the
SDL gpio (pressing 'b') on the keyboard should trigger a click event at the
center of the screen.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Changes all board specific configurations to use the new
zephyr,lvgl-pointer-input compatible. The kscan_input node in the boards
remains to have downstream backwards compatibility.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This removes odd `subscribe` parameter from bt_tbs_client_discover
function parameters list. As the API user enables specific
CONFIG_BT_TBS_CLIENT_* option, the client implementation should
subscribe to the characteristic notifications so that the user receives
the value updates.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Add simple TFTP client code using TFTP client library
Initiate connection (IPv4) with optional DNS resolution
Operate get operation then put operation in octet mode
Tested on native_posix
Issue/Discussion #60985
Signed-off-by: romain pelletant <romain.pelletant@fullfreqs.com>
Remove print_sys_memory_stats() from hash_map example as it is not used
there at all. For sys_heap make this a static function.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Exit the sample if creation of any of the RX threads failed. Name the
threads to aid in debugging and monitoring of this sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Increase the stack size of the two RX threads used in the ISO-TP sample
from 512 to 1024 bytes as the former is too small for some CAN
controller/SoC combinations.
Make both the RX thread stack size and priority configurable via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
As the metadata has to be validated anyway, let the initial vaidation of
metadata to be done in ASCS. The application can still reject the
metadata, but the length validation and supported type validation can be
performed by the stack.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The sample will leverage shell_thread function, which is not SMP-safe.
This will cause issues on some SMP platform. Set CONFIG_MP_MAX_NUM_CPUS
to 1 to fix the issue.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
NET_TEST is the approprite config for networking tests that do not
require a network device. This has the same effect of disabling
NET_SLIP_TAP, but also disables other network devices. This is required
to disable e1000 Ethernet driver on the qemu_cortex_a53 board.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The benchmark duration is in nanoseconds, and it logs the duration to
the console in seconds. The conversion is wrong for scenarios where
the execution lasts less than 100 milliseconds. Fix that by adding
leading zeros while printing duration.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
This commit adds a new sample to zbus that shows how to implement a
confirmed channel. Developers commonly asked about similar features on
zbus discord channel and RFC (in the past). Adding this sample, we can
show developers how to solve their needs (confirmed channels) without
zbus changes.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Updated the sample to check for lines from the tracing user
implementation to make sure that the glue works.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Let's just let the user implementation to its things, like
checking, locking and stuff.
The tracing_user.c now just acts as a glue.
Moved previous implementation to its sample, and cleaned up
headers.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Instead of printk. This change aligns the sample a bit more to the
canonical "hello world" sample in C. Also, samples should in general be
as portable as possible.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Overall, this makes the sample code much simpler and smaller.
Whit the changes introduced in commit commit 57e0da4d80
("boards: add zephyr,code properties to the various gpio-keys nodes")'
this example will work out of the box with any board that has at least
zephyr,code = <INPUT_KEY_0>; in its devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Because there are more comprehensive examples in the Zephyr's
example-application repository. Application development samples page now
points to example-application as well.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Because example-application contains relevant sample code related to
application development.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The default nRF hardware PWM driver is not very suitable for this
sample as that driver does not allow setting a period longer than
~262 ms. Use the nRF SW PWM driver instead. This will also ensure
that the driver is built by CI for nRF52, nRF53, and nRF91 Series.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since the driver can now be also used on nRF91 Series, its name need to
be updated to not cause confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of sending the user out of the documentation site to GitHub
to read the testing instructions, link to the generated page for the
documentation.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
This follows the same convention that has already been adopted by Intel
Alder Lake and Raptor Lake boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
There is no reason why the capabilities
should be modified by the stack after registration,
nor any reason why a the unicast client application
needs to modify the reported remote capabilities, so
all have been marked as const.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is following the same convention that was recently introduced to Alder
Lake boards (intel_adl). Additionally, an "S" suffix is added to the
boards, since what's currently supported is in fact the Raptor Lake S
variant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A sneaky whitespace was causing inconsistent rendering in the list of
available overlays.
Fixed by switching to a list table which is arguably now even easier to
read.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a config entry specifically for RISC-V runtime.
Memory usage is 7066 bytes.
Also adjust some library options. This make the ARC runtime binary
smaller as well:
before:
FLASH: 8808 B
SRAM: 3672 B
after:
FLASH: 5596 B
SRAM: 3672 B
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove unneeded board configurations since those now selected with
selecting PCH SMBUS driver.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
TC "test_single_shot_alarm_notop" is failing because there were 2 ISR
callbacks instead of one. this is because of invoking
ifx_cat1_counter_set_int_pending incorrectly. Updated
ifx_cat1_counter_set_alarm to fix this
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add an optional compare buffer to check each byte. If the byte differ
the read value will be printed as an error.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add an optional compare buffer to check if bytes read
match a provided buffer and print an error if they differ.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The DTC_OVERLAY_FILE variable is specified on the command line.
It's not preferable to set it in CMakeLists.txt.
The app.overlay file is used as the default overlay file, so use it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Add support for apollo4p_evb to the counter alarm sample.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Add gpio-keys codes for all boards. These are mostly INPUT_KEY_0 and so
on but I've used some more specific ones where it was obvious that
there's something else on the boards.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add overlays for esp32s2, esp32s3, esp32c3 based boards, which
has RGB led assembled. Those boards are capable of driving the
RGB led using SPI. The default MOSI idle level is different
to how DI driver expect it to be.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Fixes a minor documentation issue and suggests/documents additional RTT
tracing and logging options.
Showcases logging via RTT UART which is now available w/o restrictions
due to the preceding change. This has been tested on CC13/26xx hardware.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Make use of the new sys_poweroff API to actually power off the system.
This lets us remove many hacks present in the sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some boards may have less LED child nodes in the DT than the maximum
number of LEDs supported by the chipset. For these boards, the channel
test must skip the missing LEDs when preparing the color buffer and not
exit in error due to missing info.
Also, some boards may have a color mapping that is different from RGB
and this mapping should be used when providing the buffer to
led_set_color().
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Add support for LP5009, LP5012, LP5018 and LP5024 devices which only
differ by the number of LEDs they can control.
Also, update application sample to run on all these new supported
devices.
Based on initial work from:
- Marek Janus <marek.janus@grinn-global.com>
- Rico Ganahl <rico.ganahl@bytesatwork.ch>
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
The system still takes both prefixed and unprefixed dt-bindings files,
but let's use zephyr/ prefixed in the examples and documentation.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There is no need to use SYS_INIT as the HID specific initialisation
can be done in the main before the usb_enable() call.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add no-timers configuration to sample.minimal to check that
it's actually working in runtime.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This board has a single instance of EMAC connected to a NXP TJA1103
Ethernet PHY. Currently, there is no driver for this PHY and its
pin strapping configuration allows to use it without software
configuration, so EMAC is configured as fixed link.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow socket-loop to wake up immediately, if there are changes,
instead of waiting for zsock_poll() to timeout.
This change makes engine more reactive and removes
hard coded timeout from zsock_poll().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add new sample scenario without using a hardware watchdog as fallback.
This is used for the moment only for the mr_canhubk3 board, but a
generic configuration is introduced that can be used by other boards if
needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This watchdog doesn't allow to stop on CPU halt by debugger.
It also requires a minimum window value different than zero
so that the watchdog is refreshed during the open window.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
This also reduces the number of default channels supported
to 1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g474re. Define a 6kB storage_partition at the end of the
512kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
The IEEE 802.15.4 API and networking subsystem were using several
inconsistent timestamp resolutions and types. This change defines all
timestamps with nanosecond resolution and reduces the number of
available types to represent timestamps to two:
* `struct net_ptp_time` for PTP timestamps
* `net_time_t` for all other high resolution timestamps
All timestamps (including PTP timestamps) are now referred to a
"virtual" local network subsystem clock source based on the well-defined
types above. It is the responsibility of network subsystem L2/driver
implementations (notably Ethernet and IEEE 802.15.4 L2 stacks) to ensure
consistency of all timestamps and radio timer values exposed by the
driver API to such a network subsystem uptime reference clock
independent of internal implementation details.
The "virtual" network clock source may be implemented based on arbitrary
hardware peripherals (e.g. a coarse low power RTC counter during sleep
time plus a high resolution/high precision radio timer while receiving
or sending). Such implementation details must be hidden from API
clients, as if the driver used a single high resolution clock source
instead.
For IEEE 802.15.4, whenever timestamps refer to packet send or receive
times, they are measured when the end of the IEEE 802.15.4 SFD (message
timestamp point) is present at the local antenna (reference plane).
Due to its limited range of ~290 years, net_time_t timestamps (and
therefore net_pkt timestamps and times) must not be used to represent
absolute points in time referred to an external epoch independent of
system uptime (e.g. UTC, TAI, PTP, NTP, ...).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
add one Ethernet twister test for nucleo_h563zi,
nucleo_h743zi, nucleo_f429zi, nucleo_f746zg.
remove the common: harnesses: net that are not supported
leave harnesses: net for all other test execpt the one we use
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Adds driver for pwm on xmc4xxx using Capture Compare Unit 8 (CCU8)
module. There are two CCU8 nodes with each one having four slices.
Each slice has two output channels.
Unlike CCU4, this module can generate complementary high-side/low-side
signals for each output channel. A variable dead time can be added
during the off to on transitions to make sure that the
high-side/low-side signals are not on at the same time.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Adds driver for pwm on xmc4xxx using Capture Compare Unit 4 (CCU4)
module. There are four CCU4 with each one having four channels
Thus it's possible to have up to 16 pwm output signals. The output of
each channel can only be connected to a specific port/pin. The possible
connection and gpio configurations are defined using pinctrl.
The CCU4 module also has a capture mode. Capture support will be added
in the future.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The malloc arena/heap size setting can be adjusted using different
Kconfig options, depending on the libc implementation. This means
prj.conf can't be used to set this value on projects that can be built
for multiple libcs without generating a Kconfig warning.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This is no longer necessary, as this option is selected as a dependency
for class implementations where it is required.
Also remove redundant test cases.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add the dts and config overlay for nxp_adsp_imx8m board
in order to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX 8M Plus.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
The intent of this change is to add custom shell configurations for
intel_socfpga_agilex* based boards. As of now, configurations are
added for 'intel_socfpga_agilex5_socdk' board.
Signed-off-by: Girisha Dengi <girisha.dengi@intel.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
There is some ambiguity with the DHCPv4 handling in the dns_resolve
sample. On one hand, the sample uses net_config library, which does
initiate the DHCPv4 on the interface (if enabled) and may block the
initialization until the address is assigned (in case there is no other
statically assigned IPv4 addresses.) On the other hand, the sample
registers for NET_EVENT_IPV4_ADDR_ADD in case DHCPv4 is in use, delaying
the DNS queries until address is assigned.
In case net_config delayed the initialization however, this will not
work, as the event handler will be registered only after DHCPv4 address
is assigned, so the callback will not get executed.
Fix this, by checking if DHCPv4 assigned address already exists on an
interface - if so, schedule DNS queries immediately. Otherwise (for
example in case when net_config was not configured to wait for address)
register an event callback, and schedule queries from there.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enable PXP rotation for LVGL sample. The PXP is configured to
rotate by 0 degrees, so the original image is left untouched.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable PXP engine with RT1170 EVK. The PXP is set to rotate by 0
degrees in the LVGL sample, for testing purposes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- Add overlay for the esp32s2_saola board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32s2 dtsi.
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
Add sample to demonstrate usage of IS31FL3733 LED using the LED API.
This led matrix controller has several custom APIs to expose
functionality not available within the standard led API, such as
limiting LED current.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
To demonstrate how to configure Zephyr to use the IPM
driver over the IVSHMEM subsystem. Since this driver
is intended to generate inter QEMU VM notifications
it was better to create a sample app using the shell
for quick demonstration for the users.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Some tests provide their own PM hooks, adapted for testing purposes. Add
a new option to select HAS_PM, so that CONFIG_PM can be enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
That's the type of the original argument and we should use it internally as
well to prevent truncating the value.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Add two TMAP broadcast sample applications.
tmap_bms implements the Broadcast Media Sender role. It uses CAP
Initiator broadcast APIs to broadcast an audio stream.
tmap_bmr implements the Broadcast Media Receiver role. It scans and
syncs to the PA having filtered the EA by the presence of TMAP role
information. It also instantiates the VCP.
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
If the default which is set to CONFIG_BOARD is used, then the lwm2m
client fails to set the client identity as the default maximum length
allowed is only 16 and for some boards this exceeds.
So, increase the default length to accomodate almost all boards. Also
add a build assert for the length validation.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In case UDP is disabled, init_udp() is not compiled and the build
fails. Fix this, by providing dummy implementations for UDP functions,
in case UDP is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
All application level TLS operations should be guarded with
"#if defined(CONFIG_NET_SOCKETS_SOCKOPT_TLS)" and not mbed TLS configs
only. Otherwise, in case mbed TLS is enabled, but the sample is not
configured to use TLS (hence TLS credential library is not available
for example), the build may fail or produce spurious warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During testing I've found one bad path and looked if
there is more.
I've used this oneliner to find more:
```
rg :zephyr-app: | awk '{ print $3 }' | while read dir
do
test -d $dir || echo $dir
done | grep '^samples' | grep -v '<' | sort | uniq
```
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Convert the GT911 driver to the input subsystem, fix the existing boards
to work in the default config.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Now that input dump functionalities are at subsystem level, drop the
custom code from the sample, just enable CONFIG_INPUT_EVENT_DUMP.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable logging by default in kscan sample, so that user will see output
even if they do not have a keyboard connected that follows the keymap.
Add a specific testcase for boards that support the RK055HDMIPI4M
display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove display definition from RT595 EVK, as this is now supported by
the shield. Add gpio nexus for the FFC connector on this EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch refactors the usage of MS OS 2.0 descriptors in the
WebUSB sample. The function subset header was removed since it
is not allowed for non-composite devices.
Also, a new random GUID was added for automatic driver installation.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Add a simple, testable sample to print everything in the utsname struct,
and added a `uname` shell cmd basically copied from nuttx just for fun.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The stm32f207 and stm32f429 target boards only have 4 bidir EP
on the USB FS node. This is not enough to run the sample:
simply exclude those 2 target platforms
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The "virtio_" prefix is used by the open-amp library API.
Rename local functions using "ipc_virtio_" prefix to avoid
function redefinition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Add overlay configuration for native_sim, and enable it
for this platform in the test yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The "virtio_" prefix is used by the open-amp library API.
Rename local functions using "ipc_virtio_" prefix to avoid
function redefinition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Use the ISO Data sent callback in iso_broadcast sample to
synchronize the ISO data send. ISO Data sent callback is
generated every SDU interval corresponding to the number of
completed packets event generated by the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Patch to rename struct bt_ots_init to struct bt_ots_init_param
to avoid duplicating the name bt_ots_init.
Fix for issue#45968
Signed-off-by: Jai Arora <infolinesoni@gmail.com>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes metadata length checks for BT_AUDIO_METADATA_TYPE_EXTENDED
and BT_AUDIO_METADATA_TYPE_VENDOR that should be at least 2 bytes long.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The CCID list can be empty, as the Assigned Numbers is not strict
regarding it's minimum length.
Fixes: #59666
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
1. Add atcwdt200 options for WDT_NODE in testcase.
2. Add the board overlay file in wdt sample to specify
the watchdog0 alias
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Restore back BT_CTLR_ISO_TX_BUFFER_SIZE to 251 after fix in
commit e460847b60 ("Bluetooth: host: don't fragment ISO
if len <= MTU").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Rx Prio thread stack usage value to Kconfig default
value. After long duration use of hci_rpmsg in audio
application, remaining stack was 80 bytes, hence increase
back to 448 as set in the Kconfig defaults.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a config "fixture_auxdisplay" to make the samples/drivers/auxdisplay
runnable on a platform, else the application is useless
This fixture will differ from the existing "fixture_display"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently, it is not possible to use hawkbit with code that requires
POSIX_API to be set due to the dependency on NET_SOCKETS_POSIX_NAMES.
Since a lot of other code has already been moved to `zsock_`, this
commit does the same for hawkbit.
Co-authored-by: rojedag <r.ojeda@vogl-electronic.com>
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The CONFIG_PLATFORM_SPECIFIC_INIT is ARM specific, so move this to
board config file, rather than project config.
It should be no restriction to run the openamp_rsc_table sample on other,
non-arm, platforms.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This enables the samples/drivers/spi_flash on quad-spi flash
to run on any stm32 target with external NOR quad flash.
The SPI_FLASH_MULTI_SECTOR_TEST test case is possible with
quadspi too.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the support jedec configuration to run
the jedec sample application. So target board can display
the content of the quad-NOR flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The LittleFS sample may be used for both SDMMC and MMC disk drivers,
so make it possible to work with different volume disk driver names.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
Add DeviceAbstract class to default imports from pytest-twister-harness
package to simplify importing DUT package, when creating tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This PR adds ability to build mesh with tf-m psa
for platforms those support tf-m.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
websocket_disconnect api does not closes user tcp socket, so tcp socket
must be closed after done.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The BLE backend has a bug that when the MTU size is less than
the buffer the notification always fails and does not allow
to flush the buffer.
This fix checks for the MTU size of the current connection
and adjusts it. In addition, the buffer size is no longer
settable by the user and depends on the transmission size
of MTU set with CONFIG_BT_L2CAP_TX_MTU.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
The method ieee802154_radio_handle_ack() does not belong to the
PHY/radio layer but to the L2 layer. It is a callback called from the
radio layer into the L2 layer and to be implemented by all L2 stacks.
This is the same pattern as is used for ieee802154_init(). The
'_radio_' infix in this function is therefore confusing and
conceptually wrong.
This change fixes the naming inconsistency and extensively documents
its rationale.
It is assumed that the change can be made without prior deprecation of the
existing method as in the rare cases where users have implemented custom
radio drivers these will break in obvious ways and can easily be fixed.
Nevertheless such a rename would not be justified on its own if it were
not for an important conceptual reason:
The renamed function represents a generic "inversion-of-control" pattern
which will become important in the TSCH context: It allows for clean
separation of concerns between the PHY/radio driver layer and the
MAC/L2 layer even in situations where the radio driver needs to be
involved for performance or deterministic timing reasons. This
"inversion-of-control" pattern can be applied to negotiate timing
sensitive reception and transmission windows, it let's the L2 layer
deterministically timestamp information elements just-in-time with
internal radio timer counter values, etc.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add optional trigger support to sample. If the selected temperature
sensor supports triggering using the AMBIENT_TEMP channel, then
temperature thresholds will be set for +0.5 and +1.5 degrees celsius
above ambient temperature. Sample overlays are provided for the
FRDM_K22F board to demonstrate enabling this feature.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Set flash location for CM4 to ocram, so CONFIG_FLASH_BASE_ADDRESS is
set correctly.
Fixes#59213
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
A mesh key type has been added to be able to choose the different
key representation for different security libraries.
The type as well as some functionality related to Mesh key
management has been added as a public API.
If tynicrypt is chosen then keys have representation
as 16 bytes array. If mbedTLS with PSA is used then keys are
the PSA key id. Raw value is not kept within BLE Mesh stack
for mbedTLS. Keys are imported into the security library
and key ids are gotten back. This refactoring has been done
for the network(including all derivated keys), application,
device, and session keys.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This test fails when using picolibc with the default malloc arena
value. Fix this by explicitly setting the malloc arena size to zero, as
when using the minimal C library.
Signed-off-by: Keith Packard <keithp@keithp.com>
This conflicts with what the compiler expects for the definition of 'main'
when -ffreestanding is not used.
Signed-off-by: Keith Packard <keithp@keithp.com>
running samples/net/cloud/mqtt_azure in QEMU with default
configuration crashes with exception. This PR change doubles
the default workqueue stack size in a attempt to fix the issue
reported in: GH#58930.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
Increase RAM requirements for some test, we have many exotic platforms
failing to link due to the size of the test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default transport latency was not valid.
Set it to a value that is large enough.
The minimum possible transport latency is 16580 us,
but this assumes the controller ignores the RTN=2.
If the controller uses the RTN=2, the transport latency will
be slightly larger than 30 ms depending on
how the controller chooses to setup the ISO link.
Therefore, we set it to 40 ms to ensure the default
configuration is valid.
How these numbers were found:
For unframed PDUs this is defined in Core_v5.4, Vol 6,
Part G, Section 3.2.2:
Transport_Latency =
CIG_Sync_Delay + FT * ISO_Interval - SDU_Interval
Because unframed PDUs are being used, the ISO interval needs
to be a multiple of SDU interval.
If MaxPDU = MaxSDU and the PHY is 2M, this results in that
the maximum subevent size is:
2120 * 2 + 2 * 150 = 4540.
For 2 CISes this is 9080 us > 7500
Therefore, the controller has to set the ISO interval to a
minimum of 15000 us in order to fit the packets.
Based upon this info, the controller has the freedom to ignore
or use the requested RTN=2.
1. Ignore -> NSE is 2: Minimum ISO interval is 15000 us
2. RTN = 2, Increase NSE: 4 * 4540 = 18160 -> ISO_Interval = 22500 us
3. RTN = 2, Increase the FT to 2, NSE = 2 -> ISO_Interval = 15000 us
For (1):
Transport_Latency = CIG_Sync_Delay + 15000 - 7500
= CIG_Sync_Delay + 7500
For (2):
Transport_Latency = CIG_Sync_Delay + 22500 - 7500
= CIG_Sync_Delay + 15000
For (3):
Transport_Latency = CIG_Sync_Delay + 2 * 15000 - 7500
= CIG_Sync_Delay + 22500
As shown in Core_v5.4, Vol 6, Part B, Section 4.5.14,
CIG_Sync_Delay needs to be larger than or equal to the length of
all ISO events. That is, the sum of the subevents:
For (1): CIG_Sync_Delay = 2 * 4540 = 9080
For (2): CIG_Sync_Delay = 4 * 4540 = 18160
For (3): CIG_Sync_Delay = 2 * 4540 = 9080
This results in the following transport latencies:
For (1): Transport_Latency = 9080 + 7500 = 16580
For (2): Transport_Latency = 18160 + 15000 = 33160
For (3): Transport_Latency = 9080 + 22500 = 31580
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
It is not intentional to continue advertising once a connection has been
established for two reasons:
1. We do not configure enough connection contexts for this
2. We don't want to generate controller scheduling conflicts that can
possibly reduce performance.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
BlueZ btusb does not recognize hci_usb sample as Bluetooth
Controller when CDC ACM is enabled in the sample.
Refer to https://github.com/zephyrproject-rtos/zephyr/issues/29107
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the '.buffered' field to the dac_channel_cfg structure
when testing the DAC.
This boolean parameter is initialised to 'true' to PASS the test.
It follows the https://github.com/zephyrproject-rtos/zephyr/pull/57730
Also changed for the samples/drivers/dac
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix Tx ISO Data packet sequence number increment based on
the send timer timeout value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Relax Tx ISO SDUs being dropped in unicast audio client and
server samples when using the Zephyr Bluetooth Low Energy
Controller, i.e. Tx ISO SDUs dropped due to delayed ISO data
send calls in upper layer with respect to payload number in
the current ISO radio events in the Controller.
This option is disabled in the sample and users can use it
when need be.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Zephyr Bluetooth Low Energy Controller overlay config for
the unicast audio client and server samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Only print incoming data when the data is valid. Otherwise we also
print incoming data when no data was received.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
PECI bus sample requires a controller and a target
Intel system(PECI controller) + Embedded controller(PECI target),
where EC HW can be add-on card (mec172xmodular) or onboard EC.
MEC172x EVB is not intended to be connected hence excluding
the platform.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Mass storage sample contains separate Kconfig options for RAM, Flash and
SDMMC disk drivers. All disk drivers can be enabled simultaneously and
therefore the maximum number of concurrent LUNs is 3.
Configure Mass Storage class maximum LUNs to 3 to solve initialization
failures on targets that enable more than one disk driver at a time.
Each additional supported LUN increases the Mass Storage class memory
usage by 48 bytes (struct scsi_ctx) on 32-bit targets. Allocating 3 SCSI
context structures allows the sample to work regardless what disk
drivers are concurrently enabled.
Fixes: #57657
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This fixes regression causing compilation errors seen when the
code is built without preset support (BT_HAS_PRESET_COUNT = 0).
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
send_simple_coap_request needs to return a result from previous functions
instead of success at the end of the function. Without doing so the example
may wait for a response from a coap sever when a message failed to send.
Signed-off-by: Matthew Bradbury <matt-bradbury@live.co.uk>
Added waiting for prompt instead of calling time.sleep,
to fix issue with longer setting up platforms with TF-M
enabled. Wrapped iter_stdout generator, to avoid issues
when generator is created and called multiple times
in test scenarios.
Fixes: #58747
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
All those benchmarks are kernel related, so add the kernel tag to avoid
building them when non kernel changes are being submitted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the send timer only when at least one ASE source is enabled,
CONFIG_BT_ASCS_ASE_SRC_COUNT > 0 in case of unicast_audio_server,
CONFIG_BT_BAP_UNICAST_CLIENT_ASE_SRC_COUNT > 0 for unicast_audio_client.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
With Zephyr now always using `int main(void)`, there's no longer any need
for this definition. The last remaining use which gated the declaration of
_posix_zephyr_main isn't necessary as adding that declaration
unconditionally is harmless.
Signed-off-by: Keith Packard <keithp@keithp.com>
Use phase shift between the emulated A and B signals equal to the half
of the used period instead of a fixed 1 millisecond, to not enforce
decoders to use relatively frequent sampling just to make use of this
emulation.
Add also a few missing `static` keywords.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This PR relocates the sensor trigger sample application from the
`sensor_shell` sample to a subcommand in the actual sensor shell. The
subcommand has a UI for enabling a given trigger on a given sensor.
A built-in handler for the data_ready trigger is included that prints
the latest data to the log. Currently, only `SENSOR_TRIG_DATA_READY` is
supported but the groundwork is there to add others. Tested on a
`tdk_robokit1` board.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Adds a simple auxdisplay sample which outputs hello world and the
name of the board. A sample overlay is provided for the
nucleo_f746zg board with a Hitachi HD44780-compatible display.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Adds a refactored version of the psa_crypto sample back,
which was removed as part of the update to TF-M 1.7.0
due to unresolvable (at the time) issues with use of
MbedTLS instances on the S and NS sides.
This sample takes advantage of changes to MbedTLS and
TF-M that were introduced after the TF-M 1.7.0 and MbedTLS
3.3 release, and cherry-picked in Zephyr, allowing for
improved linking of MbedTLS in secure and non-secure
images. PSA API calls on the non-secure side can now be
correctly routed to the secure partition, while X.509
and TLS calls remain on the non-secure/Zephyr side.
Signed-off-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@linaro.org>
Removed few VIF properties which are being hardcoded
Updated the script to parse source VIF XML and add information to
the output
Added optional Kconfig option to configure custom source VIF XML path
Cleaned up the code
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Adding exemplary pytest shell test to show possibilities of new pytest
plugin. This test uses bidirectional communication between tester and
device under test.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Update the sensor shell logic to use the new sensor_read() APIs and
make triggers an option of the sensor_shell sample (this avoids the
trigger stealing the interrupt status from one-shot reads).
Signed-off-by: Yuval Peress <peress@google.com>
Updated the sample.yaml file with Console message Regex
pattern to fix Twister error.
Fix: #58074
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Add and use specific macros for manufacturer, product, and
serial number string descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adds the AON Timer device in the OpenTitan Earlgrey device tree.
Adds overlay files to enable the watchdog and set the alias to
`watchdog0`.
Adds the AON timer (watchdog part) to the supported features section
of the OpenTitan documentation.
Signed-off-by: Tyler Ng <tkng@rivosinc.com>
Add a basic Robot Framework test suite utilizing the robot harness
runnable in Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Added Kconfig options to make HAS characteristics that has notify as
optional property selectable and thus optional. These settings are
global, meaning that a chosen notify property will be used for all
registered has instances.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add support for long writes for the unicast client and server.
This reuses the ATT buffer for long reads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After removing the high default for MCS, it was discovered that
the TBS client requires a significant amount of buffers to work
properly as well. Added the requirement as a build assert that
depends on which optional TBS client features are enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
strtok should not be used for the purpose it was being used for.
Furthermore, the pointer that was stored from the value is not
a long-living pointer, and would in fact be invalid after the
callback has returned.
Modified the code so that we store the value in the application
and then do a proper search for the first URI in the list.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TMAP central had a few bugs. It was also using the old
BAP discovery API.
The commit fixes the bugs, and updates it to use the new BAP
discover API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added the new amg88xx sensor shield with designation
amg88xx_grid_eye_eval_shield and updated the overlay, Kconfig and
documentation files accordingly.
The platforms that are compatible with new shield changed, so
sensor sample yaml file was extended for both available shields.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Using EM2 or deeper sleep states (where HF clocks are off) requires
special care if BLE radio is used, since BLE radio relies on that clock,
and its power/clock requirements need to be taken into account
On SiLabs, radio PM is implemented as part of RAIL blob, which relies
on sl_power_manager HAL service. I've implemented SoC PM
state changes using sl_power_manager instead of emlib, and added
call to RAIL PM initialization in Gecko HCI driver.
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
Functions nrf_802154_serialization_error and
nrf_802154_sl_fault_handler shall never return.
However `__ASSERT()` might expand to an empty instruction
CONFIG_ASSERT=n and is not enough to stop execution.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Add implementation of the Telephony and Media Audio Service, as well as
two sample applications.
tmap_central reflects a smartphone implementing the Unicast Media Sender
and Call Gateway TMAP roles.
tmap_peripheral reflects an earbud implementing the Unicast Media
Receiver and Call Terminal TMAP roles.
Upon connection, tmap_central starts an audio stream using CAP Initiator
APIs.
CCP, MCP and VCP are discovered and used to send example commands.
Future improvements: 2-earbud support, add TMAP Broadcast roles,
update with new CAP Acceptor/Commander APIs as they become available
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
Enable i2c pullups in the nrf52dk overlay
Without this, the first I2C transaction after reset can be corrupted
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Align Zephyr modules with other user facing variables where settings
can be defined or extended, meaning Zephyr modules now supports:
ZEPHYR_MODULES and EXTRA_ZEPHYR_MODULES.
Support for ZEPHYR_EXTRA_MODULES is kept foir backward compatibility.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Before Kconfig clean up to be performed in boards/shields, update samples
to enable the components they require.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Extend the DHCPv4 sample to make use of the option callback functionality.
This serves as a reference of how to register and use a custom option
callback.
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Add a new endpoint callback that is used to report the found
ASEs during BAP discovery, rather than calling
the discovery callback with optional values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new pac_record callback that is used to report the found
PAC records during BAP discovery, rather than calling
the discovery callback with optional values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the BAP unicast client specific discover parameter struct.
This make the BAP discover work more similar to the other
profiles.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The direction has been moved to a function parameter instead,
and we keep a local copy of the value in the stack instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This change creates an overlay file so that the adc sample
can be used with da1469x_dk_pro kit.
Both ADC are configured with several channels.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clarify the comment in the code so people looking to use mDNS don't
think that interaction with Zephyr is necessary for mDNS support to
work, its in fact built into the networking stack when the mDNS
feature is enabled.
Signed-off-by: Chris Morgan <chmorgan@gmail.com>
- The boards\arm\cy8cproto_063_ble board now has ADC enabled
- This includes overlay files for the test app and sample app
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Current driver only allows state-of-charge. Adding relative-state-
of-charge and absolute-state-of-charge to differentiate between the
different types. Updated sbs and max drivers to support new enum.
Discussed in issue #57523
Signed-off-by: Peter Rowley <perowle@microsoft.com>
We don't need anymore enabling of Flash map for building littlefs
sample with block disk device config.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
1. Enable os_timer as a wakeup-source in the board
dts file.
2. Enable PM_DEVICE when PM is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Several duplicates were found with
scripts/twister -T samples/ -T tests/ --dry-run --list-test-duplicates
This is an issue since duplicated names causes overwriting of
results. Most duplicates looked like obvious copy-pase errors.
New names where addopted looking at other tests in the same yaml
or looking at the directory/descriptio.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add an IVSHMEM Ethernet sample to communicate between Zephyr
and Linux root cell within the Jailhouse hypervisor.
The supported configuration runs the Jailhouse hypervisor
within QEMU Cortex-A53.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The SSD16xx driver currently provides basic support for most chips in
the Solomon Systech SSD16xx range of e-paper drivers. We currently use
the SSD1608, SSD1673, SSD1675A, and SSD1681 in various boards
supported by Zephyr.
The main user-facing difference between the various SSD16xx chips is
the resolution they support (sources & gates), but there are other
differences as well. For example:
* 8 or 16 bits used to represent x coordinates
* 8 or 16 bits used to represent y coordinates
* Differences in refresh configuration (SSD16XX_CMD_UPDATE_CTRL2)
* Differences in LUT sizes
The driver currently assumes that the user specifies the number of
bits used to describe coordinates. However, as we add support for more
chips, more of the differences will become apparent and need
workaround.
Comparing data sheets from different chips in the SSD16xx range
suggests that there are (at least) two different generations
present. These differ in the size of the LUTs they expect and the way
they handle partial refresh. This impacts register layout where
SSD16XX_CMD_UPDATE_CTRL2 uses bit 3 selects "mode 2" whereas older
devices uses this for a mode referred to as "initial".
In order to add support for partial refresh in newer devices, we need
to be able to distinguish between the different generations of the
chip. It might be possible to add a DT property to indicate the
revision, but that seems like a bit of an anti-pattern and it would be
hard for users to specify the correct chip generation.
This change introduces chip-specific compatible strings instead of the
generic SSD16xx. There is unfortunately clear pattern that can be used
to distinguish different generations, so the full chip name must be
specified. A benefit of this is that we don't need to specify the
width of the fields describing coordinates in device trees.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Enable ADC support for RT1040 EVK. Tested using samples/drivers/adc,
using channels 3 and 4 of ADC0.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
conn_mgr now allows applications to request that ifaces be ignored.
This commit changes the echo_server sample to use this feature to
filter out the tunnel iface, instead of manually filtering events
generated by it.
This will allow the echo_server sample to remain compatible with
planned changes to conn_mgr, namely a switch from events being
fired for every individual iface that goes up or down, to only
being fired when connectivity is gained or completely lost.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add DT and Kconfig overlay for new experimental CDC ECM
implementation. USB device support configuration and
initialization can be done through shell by following
commands:
uart:~$ usbd config add 1
uart:~$ usbd class add cdc_ecm_0 1
uart:~$ usbd defaults
uart:~$ usbd init
uart:~$ usbd enable
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add the alias to the MX25LM512 octo-NOR flash for the spi-flash node.
Remove the overlay for the samples/drivers/spi_flash as no MDMA driver
exists yet for the stm32h7.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This sample application demonstrates the implementation of an
MQTT client that can publish messages to AWS IoT Core using
the MQTT protocol.
Fixes#22866
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Add DT overlay to be able to support and test usb_dc_dw driver
(snps,dwc2) on nucleo_f413zh board. This disables STM32 shim
driver described and configured on the SoC and board level.
Obviously,it works with other STM32F4 boards as well, but we
do not have a mechanism to apply it generically yet, upcoming
snippet support may fix that. Until then, we need something for
development and as an example.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rather than the rings, which weren't shared between userspace and kernel
space in Zephyr like they are in Linux with io_uring, use atomic mpsc
queues for submission and completion queues.
Most importantly this removes a potential head of line blocker in the
submission queue as the sqe would be held until a task is completed.
As additional bonuses this avoids some additional locks and restrictions
about what can be submitted and where. It also removes the need for
two executors as all chains/transactions are done concurrently.
Lastly this opens up the possibility for a common pool of sqe's to
allocate from potentially saving lots of memory.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Sample was using PRE_KERNEL_2, but the action (lock OFF state) can be
run at any time before the Kernel starts, ie, PRE_KERNEL_1/2. Use
PRE_KERNEL_1 + 99 to preserve similar behavior.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With picolibc moving to using the common malloc implementation, samples and
tests with picolibc-specific settings need to switch to using the common
malloc settings instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
With the minimal libc moving to using the common malloc implementation,
boards and samples with minimal libc-specific settings need to switch
to using the common malloc settings instead.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
- Added initial version of Infineon CAT1 Flash driver
- Added binding file for infineon,cat1-flash-controller.yaml
- Added overlays for subsys/nvs and drivers/flash_shell
to support cy8cproto_063_ble, cy8cproto_062_4343w boards
- Defined erase-block-size in PSoC6 MPN dtsi.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Now that the nrf52 HW models support it,
let's use their flash model instead of falling back
to the openthread RAM settings backend.
Note that the flash model defaults to just keeping the
flash content in the Linux process heap.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Disable various samples because they require certain digital signals
from the Arduino header, which are not connected when the board is
shipped and therefore not defined via the connector gpio-map.
Signed-off-by: Stephan Linz <linz@li-pro.net>
Modify the BT_UUID_XX_ENCODE and BT_LE_SUPP_FEAT_XX_ENCODE
macros to use the SYS_ENCODE_LEXX macros, instead of re-inventing
the encoding.
Also apply the macros for several other places.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function bt_codec_cfg_get_chan_allocation_val takes a pointer
to an enum, rather than an uint32_t, but was wrongly defined in
the header files and incorrectly used a few places.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implementation of preliminary Central with multiple CIS
create support in Lower Link Layer. Uses a simple CIS
offset calculation that works when ACL are created with
connection interval that is multiple of CIG ISO interval.
Each ACLs are offset using BT_CTLR_CENTRAL_SPACING hence
having the same CIG sync delay values for all the ACLs.
Advanced Scheduling to setup CIS in any order of ACL and
CIS combination, ACL placed anywhere in timeline and CIS
creation will come therein will be implemented in later
Pull Requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
New nrfx release brings change of Low frequency sources symbols
in nrf_clock hal to uppercase. This commit aligns all occurrences.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
One of these samples was filtering all POSIX arch
boards out by explictly listing them by name
(and for the nrf52_bsim by lack of UART).
Instead filter by the architecture.
There is no functional difference in tree with this change.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some of these samples were filtering all POSIX arch
boards out by explictly listing them by name
(and for the nrf52_bsim by lack of usb_device).
Instead filter by the architecture.
There is no functional difference in tree with this change.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add an overlay to avoid running the samples/modules/canopennode
on the external octo NOR flash of the stm32h573i disco kit.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The err variable is only used if the GPIO is configured in,
so move it to the right scope to avoid a build warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Change the sensorhub sample using a single trigger (on XL) and
fetching all channels (not only XL) in the callback.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Change sample to set CONFIG_FULL_LIBCPP_REQUIRED and to filter on
CONFIG_FULL_LIBCPP_SUPPORTED. Since not all toolchains provide a
full libc++ this will restrict the sample only to those environments
that do.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Use BT_CONN_TX_USER_DATA_SIZE when defining pools of buffers that will go
through `bt_conn_send_cb()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Enfore a minimum duration between edges on the IRQ pin to give the HCI
controller time to detect the state change. Without this delay and with
several packets queued on the `rx_queue`, the pin could be re-asserted
almost immediately after being cleared.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
It was previously assumed that the 'sys_mem_blocks' struct would maintain
information about contiguous blocks allocated so the release API only
took the starting address. This led to an issue where allocating 2+
blocks would end up with a memory leak because any block not being the
first would never be released.
Add the buffer length as an argument so the correct number of blocks can
be released. Also, ammend the tests to match and verify.
Signed-off-by: Yuval Peress <peress@google.com>
Some samples, tests got missed in the switch from void main() to
int main(). Cleanup those samples/tests to use int main().
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Implementing USB-C Source functionality can be difficult.
This sample application serves as an example of how
to create an application with Power Delivery Source
functionality.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
- This includes the driver, test app, and sample app
- Only the boards\arm\cy8cproto_062_4343w board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
When the only C library available is the minimal one, this test cannot
work. Accept only platforms with full C library support to prevent build
failures.
Signed-off-by: Keith Packard <keithp@keithp.com>
This symbol detects whether there is any available full libc for a
particular target, allowing tests to filter on this condition.
Signed-off-by: Keith Packard <keithp@keithp.com>
With the minimal C library malloc implementation moving to libc/common, all
of the related Kconfig variables have also changed. Update uses within the
tree.
Signed-off-by: Keith Packard <keithp@keithp.com>
Make it possible to use CPOL/CPHA SPI clock modes with the SDHC driver.
Some cards require the clock to switch to low when not active.
Signed-off-by: Łukasz Hejnak (LeHack) <lehack-ghub@lehack.pl>
Add expected output for ARMv6 CPUs in the mpu_test README, as this differs
from that for other AArch32 CPUs due to differences in how ARMv6 handles
faults
Signed-off-by: Katherine Watson <katie@radicalsemiconductor.com>
configure the nucleo_wb55rg with a prescaler on the LPTIMer input
clock to increase the max sleep duration.
With 32 the input clock is 1024Hz and max reachable timeout is
64 seconds.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
As of today it is not possible to use SPI dt-spec macros in C++,
something known and documented. The main reason is because `cs` property
is initialized using a compound literal, something not supported in C++.
This PR takes another approach, that is to not make `cs` a pointer but a
struct member. This way, we can perform a regular initialization, at the
cost of using extra memory for unused delay/pin/flags if `cs` is not
used.
Fixes#56572
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend the sample to be built with native_posix
prevent issues like #57133 in the future. Also extends the qemu
build to build a "raw" configurationw without POSIX_API or
NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Fixes the compiler error that occurs when attempting to build
the SNTP library with CONFIG_NET_SOCKETS_POSIX_NAMES=n, while
using native_posix.
Closes#57133
Co-authored-by: Chris Friedt <cfriedt@meta.com>
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Remove include of adc dt-bindings header since these are
already included in the root .dtsi file that adds an adc.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The out_of_tree_driver sample defines syscall functions, and
thus requiring CONFIG_APPLICATION_DEFINED_SYSCALL to be enabled
even if no userspace is involved. This is due to the function
generation for the syscall stubs.
Fixes#56946
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
NTC thermistor changes updated the sample app output,
correcting harness string to match sample app.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
PR https://github.com/zephyrproject-rtos/zephyr/pull/55129 deleted the
"port-sel" property. Delete this property from remaining Microchip SoC
variants and boards.
Test: west build -b mec172xevb_assy6906 samples/drivers/espi/
Signed-off-by: Keith Short <keithshort@google.com>
`bt_conn_le_create` returns a signed value. Error message format string
expects an unsigned value.
This commit changes the expected value in the format string to a signed
one, to match what `bt_conn_le_create` returns.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The `main` function now returns `int` instead of `void` and therefore
must return a value.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The `main` function now returns `int` instead of `void` and therefore
any return statements inside it must return a value.
Note that any return values other than 0 are currently reserved.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This is a follow-up to commit 9fa35bc9a0.
Align specification of the expected console output with the changes
done to the sample in the above commit.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Avoid hitting the assert
```
__ASSERT_NO_MSG(net_buf_simple_tailroom(buf) >= len);
```
when the provided buffer is longer than we can fit. Instead discard the
packet and log an error.
This handling is similar to packets are discarded in hci_uart
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Add a new sample that demonstrate the following points:
- Exchange of Key Material;
- Advertising encrypted data;
- Read advertising data;
- Decrypt advertising data that are encrypted.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The benchmark sample was not suitable for constrained devices.
With u32, the maximum accumulated time was about 4 seconds.
Some devices take more than 4 seconds to finish the benchmark.
This commit fixes the time counting by replacing the variables
and calls to 64 bits and removes all the dynamic allocation
memory on the sample to keep that as simple as possible. It
adjusts the documentation and the tests as well.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Main now has a int return type.
Fix return values, so this sample can be compiled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a paragraph explaining the change from void main(void) to int
main(void) and the requirement for main functions to return zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove RETURN_FROM_MAIN macro which performed control flow, violating
compliance tests. Replace with explicit use of posix_exit_main or return as
appropriate.
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Now that there is a generic die_temp_polling sample, this specific STM32
sample is redundant and can be removed.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The platform nrf52_bsim was specified as an integration platform,
but was missing from the allow list.
This commit adds this platform to the allow list.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix broadcast audio source and sink samples' conf file to
use Broadcast ISO feature in Zephyr Bluetooth Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove qemu_cortex_m3 from various bluetooth tests and samples since
they enable NVS which requires CONFIG_FLASH_PAGE_LAYOUT which is
not supported on qemu_cortex_m3 since there is no flash driver.
We get build failures with the arm-clang compiler because nvs.c
is referencing z_impl_flash_get_page_info_by_offs which does not
exist.
Switch to qemu_x86 as the integration_platforms if it was
qemu_cortex_m3 before.
Removed the bluetooth.mesh.mesh_shell.reduced_legacy as this was
added specifically for building on qemu_cortex_m3.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Zephyr SPI driver model for full-duplex operation assumes
data will be transmitted and received during each clock period.
The QMSPI driver for the XEC family also supported dual and
quad I/O use cases which are inherently half-duplex. To
support dual/quad the driver incorrectly processed spi buffers
as all transmit buffers first then all receive buffers. This
worked if only the SPI driver was used. It did not work with
the Zephyr flash SPI NOR driver which assumes SPI drivers
follow the SPI driver model. This commit implements a QMSPI
driver that follows the Zephyr SPI driver model resulting in
a slightly smaller driver. Dual/quad SPI transactions are
supported if the experimental SPI extended mode Zephyr
configuration flag is enabled. We also remove the QMSPI full duplex
driver added previously to support the flash SPI NOR driver.
Added board to spi loop-back test and spi_flash sample.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add config file and devicetree overlay for the fvp_base_revc_2xaemv8a
board, so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_baser_aemv8r board,
so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_base_revc_2xaemv8a
board, so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add config file and devicetree overlay for the fvp_baser_aemv8r board,
so that this sample can run on this board.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Add support for the Scan Delegator for the Broadcast
Audio Sink sample. This include advertising connectable
as well as handling PAST.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Per the BAP specification, if the Broadcast Sink role is
supported, then the Scan Delegator shall also be supported.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable the input pointer code for the LVGL sample in native posix. This
is supported by SDL which is used for the display anyway, so not reason
to keep it off by default.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update thermometer sample with mcp970x temperature sensor.
Removing test with frdm_k64f integration platform as it doesn't
provide an ambient temperature sensor.
Removing the bbc_microbit board as it only seems to provide the
die temperature of the nRF51 SoC and not an ambient temperature
sensor.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
The sample now support's setting up FAT FS on devices without
SD card access and this new ability requires update in documentation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds Kconfig option CONFIG_SAMPLE_FATFS_CREATE_SOME_ENTRIES
which causes the sample to attempt to create one file and one
directory, in case if listing does not show anything, just
to demnonstrate how FAT FS operations work on internal flash.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commits adds support for nrf52840dk_nrf52840 with two additional
configurations:
- with FAT FS on internal SoC flash
- with FAT FS on QSPI connected MX25
In case of SoC configuration there is re-configuration of internal
partitions done, doe to need for at least of 64kiB for FAT FS.
The QSPI configuration only defines additional partition on
external device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide a sample for ivshmem-doorbell running under virtualization
(QEMU). The sample relies on existing tools (ivshmem-server,
ivshmem-client) that must be run at the host (unix).
The sample can be run on userspace or kernelspace, and on arm64 (qemu,
kvm) and x86_64 (qemu) platforms.
This execution of this code is quite complex, thus the README should be
made available in the official documentation. This is why the code is a
sample and not a test.
Signed-off-by: Rodrigo Cataldo <rodrigo.cataldo@huawei.com>
Co-authored-by: Henri Xavier <datacomos@huawei.com>
Add the config for testing the jesd jedec sfdp of the octoNor flash
on the stm32h573 disco kit.
The external octoflash is the macronix MX25LM51245 or micron.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix RAM overflow building for direction finding feature on
nRF53 Series, by reducing thread stack sizes. And move
building DF plus CIS feature to hci_uart sample from
hci_rpmsg sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix RAM overflow by using default values for
BT_BUF_ACL_RX_SIZE and BT_BUF_ACL_RX_COUNT. Default Rx size
of 27 is sufficient for nRF51 SoC, as it does not support
data length extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add esp32s3 overlay to qdec sample to ilustrate
the use of PCNT in quadrature enconder mode.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Make queues used in metairq dispatch sample capable of storing all
generated messages. This prevents seemingly random hangs that tend to
happen with some random seeds.
Fixes: #54610
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Builds on warp7_m4 were overflowing flash, hence the change to
the another platform from the allow_list, which is not causing
overflows.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This sample is failing regularly in CI and locally for
qemu_cortex_a53_smp, seems like the stack is not enough:
thread_analyzer: 0x4001f740: STACK: unused 1040 usage 1008 / 2048 (49 %)
thread_analyzer: 0x4001f3a0: STACK: unused 944 usage 1104 / 2048 (53 %)
thread_analyzer: 0x4001f000: STACK: unused 1040 usage 1008 / 2048 (49 %)
...
Increasing to 2048 seems to make it run reliably.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
Clearing the shared memory is no longer required
after bounding functionality was reworked and an attempt
to read the magic numer is no longer the case.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Add the new nucleo_h503rb board for testing the adc_api driver
on the ADC1 channel6 (pf12). Read the analog value of the ADC1
input on A5 of the arduino connector (CN16).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove "-machine Q35" from QEMU_EXTRA_FLAGS since this is now the
default qemu_x86_64 configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Quark SE does not exist in zephyr anymore and this sample was there as
one of the first i2c users in Zephyr and is not providing any value any
more.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After reworking counter driver to use device tree this sample
stopped to compile for nordic DKs. Providing overlays to fix
the compliation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
SMP sample applications are located in the 'arch' directory.
This patch fixes the pathname for SMP sample examples.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
The unicast client used the BT_DATA_UUID16_SOME and
BT_DATA_UUID16_ALL instead BT_DATA_SVC_DATA16 for
discovering ASCS servers.
BT_DATA_SVC_DATA16 is the right one to use, as that
is mandatory for a server to advertise, and the UUID
ones are only recommended. Furthermore, the service data
of the ASCS server can now also be retrieved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove overlay added by mistake. SMBus EEPROM PR is not merged and the
dts would be updated for qemu_x86_64 board's dts.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Treat sample data as signed when using differential mode for ADC
sampling, so that negative differential samples will be converted
correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update board overlays for boards with LPADC IP present on their SOCs, to
use new LPADC API for channel numbering.
For the RT595 and LPCxpresso55S69 EVKs, additional channels are enabled
to demonstrate the resolution and differential channel features of
the LPADC.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a board overlay for sam4s_xplained. Channel 5 (PB1) is enabled as
well as the internal temperature sensor.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
To disable the flash by default so the openthread RAM
settings backend is used instead.
This allows using this samples with the overlay-ot.conf
directly in the simulated nrf52_bsim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add appropriate configuration parameters for using the Intel TCO
watchdog driver with the rpl_crb board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
From now app layer is able to return explicit response code and
reason that will appear in ASE Control Point notification.
Fixes issues of ASCS/SR/SPE/BI-(07/08/09)-C PTS test cases, where
PTS was receiving wrong response codes and reasons.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add kconfig to let the ISO broadcast and ISO receive samples report
packets no more than once per set interval of packets.
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
Input events with no associated device structure are valid. Handle them
in the sample by printing NULL instead of crashing trying to lookup the
device name.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Instead of assigning the address of value to the temporary function
parameter, there should be a dereference of the pointer and assignment
of PDOs count to it.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Modifying counter drivers (rtc and timer) to rely completely on
device tree and not on Kconfig of MDK flags.
Adapting dtsi for all SoCs and adapting test configuration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
k_work_* APIs cannot be used from user threads, hence it has to be
replaced with some other solution to retain userspace functionality in
the sample.
This commit reworks the sample as follows:
* Replace delayed work items with combination of k_timer and a
dedicated thread to send UDP packets. k_poll_signal is used for
communication between k_timer callback and UDP thread.
* As kernel objects should not be placed in a memory modifiable from
user threads, declare a separate structure for them, and link it
with the client context structure with a pointer.
* k_timer_init() is not a system call, therefore it has to be called
from supervisor thread. Therefore, add an additional function to
initialize UDP, and use it to initialize kernel objects used by the
UDP module and grant access for the main thread before it becomes an
user thread. UDP thread inherits permissions from the parent (main
thread).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some recent PRs included conditional compilation for
KCONFIG_BT_LL_SW_LLCP_LEGACY, which must be removed.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This will enable the use of stm23f072b_disco on this sample.
- Set pwm3 as tim3_ch1_pc6 since red led is using PC6/ TIM3_CH1.
Signed-off-by: Scott Chao <scott_chao@wistron.com>
We get compile warnings of the form:
drivers/console/uart_console.c:508:8: error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint returns an int, change check to an explicit test against
the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Add the following to samples.yaml to handle the issue:
filter: TOOLCHAIN_HAS_NEWLIB == 1
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Add the following to samples.yaml to handle the issue:
filter: TOOLCHAIN_HAS_NEWLIB == 1
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove duplicated board specific conf file for iso_broadcast
and iso_receive samples. Instead, have an overlay conf file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add an initial board overlay in the input_dump directory for testing
zephyr,gpio-keys. This takes the exsiting "gpio-keys" node, changes the
compatible to the one used by the gpio keys input driver and set some
codes.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Current stack size is making build fail due to ram overflow.
So, decresase total heap available to make room for the application.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Differ the __ASSERT_NO_MSG of the k_msgq_get()
just after checking the nb of cycles.
It allows precise counting of cpu cycles where the assert
does not interfere.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
1. `zsock_socket()` gets the right packet familiy.
2. `inet_pton()` returns 1 on success.
This should address #55193.
Signed-off-by: Sebastian Arnd <sebastianarnd@gmail.com>
Several places used the bt_audio prefix where it shouldn't.
Also moved the BAP documentation to its own file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a new header file bap_lc3_preset.h which contains
the definitions of the LC3 (pre)sets defined by the
BAP spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_unicast_client API to bt_bap_unicast_client
and move the API to bap.h
Also adds the _bap_ infix to the bt_unicast_client functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removes the unused pac_pache from the unicast_client.
This moves the storing of the PAC records (in the form of
struct bt_codec) from the stack to the upper layers.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample was only willing to connect if the pair RSSI level
was over -35dBm. That is ok when testing physically keeping
devices at less than 1 meter from each other.
But in CI we test with a default attenuation of 60dB between
devices and the Tx power is 0dBm.
Which causes the tests based on this sample to fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sample was only willing to connect if the pair RSSI level
was over -40dBm. That is ok when testing physically keeping
devices at less than ~1 meter from each other.
But in CI we test with a default attenuation of 60dB between
devices and the Tx power is 0dBm.
Which causes the tests based on this sample to fail.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The samples under the tensorflow modules directory has been renamed
since commit 6fd1b02496. However, the path
in their README.rst was not updated.
Additionnaly, the modules top directory under the samples is missing for
the samples magic_wand and tflm_ethosu.
This fixes the path to the tensorflow lite micro samples in their
README.rst.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Add a first input sample in the subsys/input directory. This just prints
any input event on the console.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
For the POSIX arch, this test relays on the native_posix RTC.
But that does not exist in the nrf52_bsim.
And without something to measure actual execution time,
it does not make sense to benchmark in the POSIX arch.
So disable this test for this platform,
and add a clear build error to warn users.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Automatically add trigger callbacks to any sensor that supports the
data ready trigger. Use a window average in order to avoid too many
logs.
Signed-off-by: Yuval Peress <peress@google.com>
- Add overlay for the esp32c3 board to die_temp_polling sample.
- Add aliases for the die_temp_polling sample to esp32c3 dtsi.
Testing Environment:
esp32c3-devkitC-02
Signed-off-by: Hiroki Tada <tada.hiroki@fujitsu.com>
Add support for the Arduino GIGA board, an STM32H747XI based development
board in Arduino form factor, featuring external flash, SDRAM, Bluetooth
and WiFi.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Allow to register a callback function which is called when a firmware
update is canceled by the cancel command.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
A new Z_SPIN_DELAY() macro has been added which
can be used to reduce a bit the amount of noise
due to the POSIX arch need to break busy loops with
k_busy_wait().
Use it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for RT595 EVK to display sample using RM68200 based MIPI
panel. The board is configured with an increased heap size to account
for the panel's high resolution.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
nrf51 has been discontinued. There is no reason to support
ble mesh as well as new mesh features and fitting of samples
for nrf51 DK platforms. As alternative support of nrf52840
has been added if there wasn't before.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
These Kconfig options are changing from select to depends on,
therefore make sure the needed options are used in the sample
project.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
These Kconfig options are changing from select to depends on,
therefore make sure the needed options are used in the sample
project.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
For mcuboot support, this Kconfig option needs to be selected, this
is done by having a separate project configuration file when
building the version that supports mcuboot.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Selects the FLASH_MAP Kconfig as this is changing from an automatic
selection to a depends on due to a dependency loop.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This drops using the environmental part when referencing ZEPHYR_BASE
as the environment value does not have to be set and, in most cases,
is no longer set at all.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
k_work_* API cannot not be used from the user threads as the APIs are
not syscalls. Doing so leads to a crash when userspace is enabled.
As the current use of delayed work API from user threads is merely
scheduling of the initial work execution, it can be moved into the main
thread context. The time difference from the former and current approach
should be marginal, as the start_tcp/udp_proto() calls are not blocking
calls.
Another issue was usage of k_mem_domain_add_thread() on uninitialized
TCP threads. This lead to another crash, as assigning thread to a memory
domain also involves removing it from the previous domain, which lead to
NULL pointer dereference if thread was not initialized yet. As, by
default, newly spawned threads inherit memory domain assignment from
their parent, it's not really needed to assign the same domain
explicitly, hence, it can be safely removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allow the Unicast Audio Client sample to work if there are no
sink or no source ASEs on the remove device (e.g. if the remote
device only has sink ASEs).
If the remote have neither, it will abort.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Zephyr controller does not support PAST, and there
is no other controller we can build upstream with these samples.
Disable these 2 samples for the nrf52_bsim until PAST
is supported by the controller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
By using an mpsc queue for each iodev, the iodev itself is shareable across
contexts. Since its lock free, submits may occur even from an ISR context.
Rather than a fixed size queue, and with it the possibility of running
out of pre-allocated spots, each iodev now holds a wait-free mpsc
queue head.
This changes the parameter of iodev submit to be a struct containing 4
pointers for the rtio context, the submission queue entry, and the mpsc
node for the iodevs submission queue.
This solves the problem involving busy iodevs working with real
devices. For example a busy SPI bus driver could enqueue, without locking,
a request to start once the current request is done.
The queue entries are expected to be owned and allocated by the
executor rather than the iodev. This helps simplify potential
tuning knobs to one place, the RTIO context and its executor an
application directly uses.
As the test case shows iodevs can operate effectively lock free
with the mpsc queue and a single atomic denoting the current task.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Increase main stack size for next USB device stack config to prevent
stack overflow when FatFs is used. The new main stack size value matches
the value used in old stack mass storage sample config.
Fixes: #55210
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Microchip XEC devices specify GPIO pin using octal numbering and
organize pins in banks of 32. Chip documentation does not use
bank naming rather naming each pin by its octal number. This has
led to the developer having to calculate the bit position of a pin
in its 32-bit bank when a specifying the pin for GPIO usage. We
created a set of defines for all possible GPIO pins that specify
the DT GPIO bank name used in the chip level DTSI files and the
bit position in that bank.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
When running the testcase libraries.hash_map.newlib.cxx_unordered_map.djb2
of this samples/basic/hash_map, it appears that some platforms
have a too low stack size.
This PR is increasing that value to pass the testcase.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
LPC55S69 flash requires all writes be in multiples of 512 byte blocks.
Configure littleFS sample for these requirements when building targeting
the LPCXpresso55s69 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
If waiting on the first semaphore in the main loop times out, the main
loop starts from the beginning and attempts to start scanning for
broadcast sources. But since the first semaphore was not passed, the
scan_recv_cb callback was not called yet and thus the previously started
scanning was not stopped. As a result, an attempt to start the scanning
will fail with -EALREADY and the main thread will end. To solve this,
-EALREADY is now ignored when checking the return value of
bt_audio_broadcast_sink_scan_start.
Signed-off-by: Ladislav Podivin <ladislav.podivin@tietoevry.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
* ensure Thrift documents are globbed in `modules/index.rst`
* add a "What is Thrift?" section to the Thrift sample
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The "Thrift Layers" image gives a good visual representation
of Thrift in what would otherwise take many words.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Set the bbc_microbit board as part of the integration platforms, since
the sample is designed for the board and so CI should fail if the sample
no longer builds for it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sample no longer fits in RAM, reduce the number of discardable
packets to make it fit.
Fixes#55328.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Zephyr supports ADCs with 16-bit resolution, but the ADC sample
displayed readings for such incorrectly due to too-small datatype
This commit fixes the ADC sample for ADCs with 16-bit resolution
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
The Kconfig symbol CONFIG_SPI_FLASH_AT45 is selected by default if a
compatible device is enabled.
Remove obsolete config entry.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Kconfig symbol for CONFIG_SPI_NOR is selected by default if a
compatible device is enabled.
Remove obsolete board config files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Change the samples/boards/stm32/backup_sram to run on the
nucleo_u575 or stm32u585 disco kit where the backup sram is enabled
Press the reset button to see that the content of the backUp SRAM
is not altered.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a driver implementation that uses the I2S peripheral.
Based off this blog post:
https://electronut.in/nrf52-i2s-ws2812/
Should help with #33505, #29877 and maybe #47780, as there is no garbage
data at the end of transmissions on nRF52832, and no gaps.
Signed-off-by: Jonathan Rico <jonathan@rico.live>
Introduce new USB Mass Storage Bulk-Only Transport implementation
written from scratch. Main goal behind new implementation was to
separate USB and SCSI parts as clearly as possible.
Limited set of SCSI disk commands is implemented in separate source code
file that is internal to USB device stack. While it should be possible
to use the SCSI implementation by other components there is currently no
other user besides USB MSC and therefore SCSI header is kept private.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This demo prints out STARVING, HOLDING, EATING, DROPPED, THINKING. The
HOLDING state was missing and the EATING state was placed in the wrong
sequence.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc doesn't have any output buffering for printk, so the various
pieces of the status line would get interleaved between threads. Build the
whole line in memory using snprintk and then print it in a single printk
call.
Signed-off-by: Keith Packard <keithp@keithp.com>
Some features like IP fragmenting are default disabled to keep the network
stack compact for small devices.
In bigger applications as well as for the Maxwell Pro tests it required
to have the full functionality enabled. This can also work as example for
new projects.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Turn off display_blanking to make it able to refresh on a device
even when blanking default off.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Remove dependency on usb_device for virtual USB device / hosts sample.
This allows sample to be built in CI.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support to run the sample on nrf52840dk_nrf52840 using
internal SoC flash, and external mx25 device over QSPI or SPI.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This reverts commit 7c00ecbbbf.
Changes introduced in that commit break the Dining Philosophers demo
for the following in-tree platforms:
- actinius_icarus
- circuitdojo_feather_nrf9160
- nrf5340_audio_dk_nrf5340_cpuapp
- nrf5340dk_nrf5340_cpuapp
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/55040.
Signed-off-by: Saku Rautio <saku.rautio@nordicsemi.no>
Since the commit 897d2b8204 ("boards: arm: nrf52840dongle_nrf52840: Use
USB CDC as default UART") this board has the 'cdc_acm_uart' node defined
and selected (with 'chosen' node) as 'bt-c2h-uart' by default. Overlay
file is no longer required.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The BT Mesh Configuration Client API is used in an asynchronous manner
and the app key was not added before attempt binding it to mesh models.
This caused the binding functions to fail and resulted in a fail when
trying to to send mesh messages.
This commit registers a callback that is called when the app key is
assigned. After this callback is called, the binding functions are
called.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Adds missing selects for CONFIG_BASE64 for overlays which use
shell/UART transports that were not updated.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Select in Kconfig causes many issues with dependency loops, this
resolves the issue by replacing most select with depends on for
MCUmgr, including updates to the sample smp_svr application and
tests.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
() This makes the stack for both consumer and producer threads
larger to avoid stack corruption and overflow.
() Limit to 1 CPU to preserve ordering of output for twister.
() Remove the platform_exclude as they are passing now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In commit 31e0d86484, the stack size
was unjustifiably changed from a base of *768*
(plus a configurable extra stack size) to *2048*.
This change broke our sample tests for one of our products, which has
less available memory for the threads' stacks.
The stack size is dropped to *1024* to align with the stack sizes
specified in the other samples, which were changed in commit
31e0d86484.
Signed-off-by: Saku Rautio (Ext) <saku.rautio@nordicsemi.no>
Add the overlay file to run the samples/drivers/led_pwm
on the nucelo_u575zi_q board.
Two green leds are used on pc7 and pb7 corresponding to pwm
channels of timers3 and timers4.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the overlay file to run the samples/drivers/led_pwm
on the disco_l475_iot1 board. Two green leds are used on pa5 and pb14
corresponding on 2 pwm channels of timers2 and timers15.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the overlay file to run the samples/drivers/led_pwm
on the nucleo_l073rz and nucleo_f091rc board.
The green led is used on pa5 for pwm channels of timers2 channel
The leds node has to be disabled to let the pin for the pwm nodes.
The spi1 is disabled in that sample to avoid conflict on pa5 pin.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Only the receiver of the audio is allowed to send the
receiver start ready command.
Furthermore, this removes the automated transition to the
streaming state on the server, as the server now shall
call bt_audio_stream_start to put the stream into the
streaming state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
New event LWM2M_RD_CLIENT_EVENT_REG_UPDATE to indicate
application that engine starts registration update.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Current ipm_esp32 sample code requires esp32_net_firmware.c file
as source input, which is generated after ipm_esp32_net build.
esp32_net_firmware.c was manually added as binary blob, which needs to
be removed from the repository.
This change modifies ipm_esp32 CMakeLists.txt to include the build
output of ipm_esp32_net as input source of ipm_esp32 build, allowing the
binary blob to be removed.
Current approach shall be updated during next release.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Disables the initial attestation suite, which we are unable to run
at present due to a license issue with the underlying QCBOR library
which this service depends on in TF-M.
This commit can be reverted once an acceptable solution has been found
for the QCBOR license in TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Prevents Zephyr from enabling the initial attestation service in TF-M,
due to a dependency it has on an incompatibly-licensed library (QCBOR).
This update checks if either of the following config flags are
enabled at build time:
- `CONFIG_TFM_PARTITION_INITIAL_ATTESTATION`
- `CONFIG_TFM_PSA_TEST_INITIAL_ATTESTATION`
If either of these are set to true, a fatal error will be thrown at
build time, indicating the reason for the failure.
This change can be reverted once a longer term solution to the QCBOR
license issues has been resolved.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This instance might be shared by other users that may have opened it
earlier in the boot chain.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The sample is not fully working (yet) and it will be soon replaced.
Remove it to not confuse people.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Here we add a client and server samples for the basic
"hello" service.
These samples are designed to be run by either Zephyr or
the host machine, interchangeably.
Additionally, there is a python version of the client
to demonstrate Thrift's cross-language capabilities.
This code was merged from the following repository
at the commit specified below, with minor formatting
and coding-style modifications.
https://github.com/zephyrproject-rtos/gsoc-2022-thrift
e12e014d295918cc5ba0b4c507d1bf595a2f539a
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Zero initialize has_param in BSIM test.
Also, specify all bt_has_register_param members in hap_ha sample.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
The source file for most single-file sample apps is usually
`main.c`. Rename this file to be consistent with other
samples.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
* use `read()` instead of `recv()`
* use `write()` instead of `send()`
* use `CONFIG_POSIX_API` and drop `<zephyr/posix/..>` prefix
* use `perror()`
* fix `Makefile.posix` to use `CC` instead of `CXX`
* fix race condition which caused an unhandled EOF
and infinite loop, by adding a readback / echo
* Updated the docs to reflect the expected stdout
* Improve doc clarity
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Point 6 of Samples Guidelines stated that samples should be references and
not tutorials. The problem is that there is currently no tutorials in
Zephyr.
The proposal here, is to use samples has tutorials. The references could be
left to the tests.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add Kconfig option for running the CAN ISO-TP sample in loopback mode. This
removes the need for a fixture when running the sample via twister.
Exclude the loopback tests for kvaser,pcican. See
836f582664 for more information.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The stm32g081b_eval board does not implement Dead Battery
functionality on PD Port2. Change the sample configuration
so that PD Port1 is used, which has Dead Battery support.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Enables the watchdog timer within the DTS of supported boards,
add sample overlays showing how to use NMI WDT interrupts and
updated the board features inside the boards' doc / yaml files.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
The AN547 no longer functions with this TF-M sample, and has been
broken since TF-M 1.6.0 without CI catching the issue, since this sample
wasn't modified to cause a CI run on the affected target.
Removing this board from the sample until the board support can be
reworked.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Update TF-M secure partition sample for TF-M 1.7.0.
Removes the support for Library model in the sample.
Updates to using PSA framework 1.1.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
Update the sample to be compatible with API changes introduced in
TF-M 1.7.0, adding a new direct call to the PSA Crypto API to generate
random data, and cleaning up existing functions for compatibility
sake.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Removes the `psa_crypto` sample from the current release, due to
PSA API conflicts that can not be immediately resolved between Zephyr's
instance of MbedTLS in the NS environment, and the TF-M PSA APIs
included when building with TF-M support.
PSA API changes upstream in MbedTLS 3.2.1 (used by TF-M 1.7.0), and
MbedTLS 3.1 (used in TF-M 1.6.0) need to be be resolved in both
upstream projects before this sample can be reintroduced.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Removes the `psa_firmware` sample, which is based on an older version
(0.7) of the FWU service from TF-M 1.6.0. This sample needs to be
refactored to use FWU 1.0, included in TF-M 1.7.0 and future releases.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Add SFN model configurations to samples.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
In TF-M 1.7.0 release the Library model has been removed.
Remove the library model support from zephyr before updating TF-M
version.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
ENTROPY_GENERATOR is needed for OSDP Secure Channel capability. Now
that Secure Channel patches are merged, enabling it by default.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
- Include ISO stream count in ISO streams definitions in
controller.
- Create ISOAL source on controller when ISO data path is
setup.
- Send broadcast data buffers transferred from host over
HCI to ISOAL as ISO SDU fragments.
- Allow bot conn and ISO data to use data_buf_overflow.
- Store ISO interval during BIG create.
- Remove ISO data path for each BIS during BIG terminate
procedure.
- Set value (temporarily) for ISOAL target_event enabling
it to Tx data.
- Check status of data fragment sent to ISOAL for memory
allocation and other errors.
- Destroy ISOAL source when ISO stream released.
- Use ISO Advertising handle, not stream handle to destroy
ISO data path.
- Remove extra ISOAL sink destroy call when removing ISO
data path.
- Add FIXME comment as reminder to address LL_ASSERT on
isoal_status error.
Signed-off-by: Carl Stehle <droid@appception.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add direction finding, Broadcast ISO and Connected ISO conf
files for build coverage and user convenience to build
respective binaries for nRF53 Series network core.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The RX ready condition is unspecified with regard to being level or edge
triggered, so all available data should then be read once the RX ready
condition is detected. This change brings the sample into agreement with
the documentation and tests.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Recent Zephyr changes (IEEE 802.15.4 config moved from KConfig
to DeviceTree) left the TI CC1352r1_launchxl board's net examples in
a non-working state, mainly due to the fact that CC13x2 has two
IEEE802154 interfaces available (2.4GHz and sub-GHz) and none were
enabled.
This commit enables the 2.4GHz radio inside the board's DTS and also
introduces a new devicetree overlay inside the echo* samples:
'boards/boards/cc1352-enable-subg.overlay', enabling the sub-GHz
interface.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
glibc and newlib print "(nil)" for NULL pointers while picolibc just prints
"0". Allow either by replacing the exact "(nil)" match with ".*" instead
Signed-off-by: Keith Packard <keithp@keithp.com>
By default, qemu_coxtex_m3 target selected SLIP driver as
a network backend. This requires some unstandard tool (tunslip6),
which are error prone and might not necessary work.
Ethernet backend work equally well as in native_posix so
use the same for both.
Change the default emulation platform from X86 to Cortex-M3
because it supports Ethernet by default.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
