UART0 is connected to Nordic BLE chip, copy the configuration from
arduino_101 where there is the same chip.
Change-Id: Ic9fe30f4562d261920c0cfd359ea34be4e7e2476
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable GPIO and select UART0 for Nordic BLE chip.
Change-Id: Ic1bf82a8b97fcc231eb857ee0bd05381a24a2d25
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This will be needed to implement local privacy support.
Change-Id: I6222a7d396d47929d6f8946793bbf3f49eaae179
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There will be other uses, so rename this to bt_addr_le_is_bonded and
export it through hci_core.h.
Change-Id: Ia033a215255f2ec2e513c785dd1b9862faaf5ac8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement bt_gatt_attr_read_cpf() for NBLE.
Change-Id: Ia99db05a3f67bef3c1617df37fd371a8b1e8beb6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CONFIG_BLUETOOTH_DEBUG_DRIVER provides too low level information to be
useful for samples. Remove it from default settings.
Change-Id: I9d99f9953d4e6b839eeb51ed393e4aed1eeeb01b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If the local controller doesn't have a public address we need to
generate a static random address and use that as our Identity Address.
Change-Id: I3db261b630c670d285c6bfacbe090184cccb5e8c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for the persistent storage API.
Change-Id: I7a6cc283aa88e7d861af18a6f0db2ed8c71e44a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Store the Identity Address and Random Address in their own variables.
If the controller doesn't have a public address a static random
address is set as the Identity Address. Also keep properly track of
which address was used for advertising and initiating connections so
that the connection object contains the right information.
Change-Id: I3e9dc2036b330c19c2725b180fd061da2df8a0fa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enable building pinmux drivers to catch build breakage.
Origin: Original
Change-Id: I86ec02423bf23ee6aca41b9413e240e984313fcf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The SPI API states:
"max_sys_freq is the maximum frequency supported by the slave it
will deal with"
However, currently, for DW the max_sys_freq is a divider which confuses
the user.
This patch adds a small hack to allow users to use both dividers and
frequencies when configuring the bus. The only trade-off is one has to
use dividers for bus frequencies smaller than 65536Hz. However, since
most devices nowadays can run at clock frequencies more than 100kHz,
this is a good compromise.
Change-Id: I44386cc8ad501b08eeaf71bc7588661ff36e108b
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Since sensors' API uses SI units, all attributes and channel reading use
SI units. Hence, conversions from other units to SI are necessary.
This patch adds helper for converting:
* m/s^2 to Gs (and vice versa);
* degrees to radians (and vice versa);
Change-Id: I49f8763bed253ff6bde4c97618766b05f97da699
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This patch as following attributes:
* SENSOR_ATTR_OFFSET: for setting offsets in order to adjust the read
values;
* SENSOR_ATTR_CALIB_TARGET: for setting target that the chip internal
algorithms need to converge to when calibrating;
Change-Id: I3aae5aa06bcd1376423e58b0511267ea43038718
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The shorter form "param" is used elsewhere and this helps avoid overly
long lines.
Change-Id: Ie76497b5bf30e72099d13a26db9cacb8cd2c9c79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Set the target to ARC to speed up flashing. the difference:
before
downloaded 27320 bytes in 50.685825s (0.526 KiB/s)
after
downloaded 27320 bytes in 3.396626s (7.855 KiB/s)
Change-Id: I53ca26f97eefd40e869662b137f5a659082aa478
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Exclude STM32F103RB platform from the test. The SRAM is overflown by
>20kB, while the CPU itself has 20kB of SRAM.
Change-Id: Ic9aad6b88d517b62f4a18901cd698ba9a9defb40
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Disable the test for STM32 based platforms until an implementation of
timestamp counter becomes available.
Change-Id: I2e50dac36dbfdc61081610c0e0cf1ace8892f602
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array.
Change-Id: Ie8c023de62cda75f7057184555806401f0381a1a
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The commands array is not expected to change and can be declared
const. This allows callers to cleanly declare their commands lists as
const, effectively moving the structures from SRAM to code section.
Change-Id: Ie1710622b8cfa609e129eb79712f910f1d1aace3
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The comments in the sensor header specify that pressure should be
expressed in kPa, but the bmp280 driver returns a value in Pa.
Change-Id: I6d5346db250d1a01a1e5e31fb1d8685ab5dc405b
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
SPI flash depends on SPI. Enable the SPI flash driver only when
SPI is enabled.
Change-Id: I902588b806a4a5773fddb58a7567a8e0d4ba9fe0
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Fixes this built error:
zephyr/drivers/pinmux/dev/pinmux_dev_quark_mcu.c:138:18:
error: 'PINMUX_BASE_ADDR' undeclared here (not in a function)
.base_address = PINMUX_BASE_ADDR,
Change-Id: I54f15bc262cb887117f7b56660bcf85983daa877
Signed-off-by: liu.lei <lei.a.liu@intel.com>
From now on user/app has possibility to dismiss Passkey Notify authentication
on acceptor side even with DisplayOnly interface. The action on 'Cancel' API
in this case is disconnection.
Change-Id: I4be198482c23c0ccaeb0112b72ff269037e03583
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Some devices may actually lose track of CCC setting so this is required
to work around the problem, in case the device does work track CCC
properly the extra write shall not cause anything more than one extra
round trip thus it is probably work doing it anyway.
Change-Id: I9e5ed3fa459e4617c6fae094d0ce0f80cb2682e4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement bt_gatt_attr_read_cud() making working peripheral_esp app.
Change-Id: Ic9634bf31a39ae9cd55279de34ee4c0c0995a4dd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Deal with controllers that don't support controller to host control.
This may potentially lead to dropped packets so make a clear warning
log of the issue.
Change-Id: Ie8fdaed826a072fd157343721222f618328d59a3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reading supported commands isn't an LE-specific feature, so the
command should be in common_init() rather than le_init().
Change-Id: I613bbe8d39b4c2b6dadc45a710bc59568ec9b488
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Splits the test into two clear sub-categories: microkernel and nanokernel.
This is done to maintain consistency with other tests that do the same
(e.g. test_obj_tracing, test_sema, test_stackprot, test_timer).
Change-Id: Iddb1ec8d569a9d953fb8af5ce08e87b51995f821
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It will extensively test all provided functions within a normal usage of
the API.
Change-Id: I723203a29c3f3416b464030a7fe34eac5fff6095
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for double linked list provided through misc/dlist.h, this provides a
generic API for single linked list in misc/slist.h. It follows the same
naming rule as in dlist.h
Change-Id: I955bd16a201bc9987c29f5a9e3e3d8447682a71e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes line length and whitespace issues flagged by the checkpatch tool.
Change-Id: Id49cd5341571ac7893929a2836fe5e06166abe06
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When an ethernet frame is larger than UIP_BUFSIZE,
a net_buf is allocated but never released. Therefore
after few bad frames, no more RX network packet
can be received.
Fixed by allocating the net_buf after checking
the frame length.
Change-Id: I436487e3c26d739de347b4db6facc3a3dbebbe75
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
Reduces the amount of memory allocated for fiber's stack.
This permits the test_context to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for
test-context.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: I219f63063ee2dca5b0326e25141d8b37f4cd1d74
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for task's stack.
This permits the test_pool to compile on boards like
nucleo-f103rb. Sanitycheck script passes all test for test-nano.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ib8041f6d91e8ffc5fcb16dc73de1f7662d9596da
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Reduces the amount of memory allocated for stack (both fiber
and task). This permits test_sema and test_mutex to compile
on boards like nucleo-f103rb. Sanitycheck script passes all
tests for test_sema and test_mutex.
This patch was verified on the emulated platforms and not
against real hardware boards.
Change-Id: Ie25288bbbbfa64bfc5f7463639bfb09639cc184f
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
This also separates IRQ_PRI into one for DW and one
for QMSI, to follow the convention of every other
drivers.
Change-Id: I338f819f71c18fa9e17015e8a588a3d0207350c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ic73783189db57059d2b7f3727e4802e1b2e27931
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
