Device drivers may use task_sleep() routine during the initialization.
As device driver initialization is carried by idle task, it can not
be sheduled out as any other task. Idle task goes into a wait loop
instead.
In order to invoke task_sleep() device drivers must enable
CONFIG_NANO_TIMEOUTS option.
Change-Id: Ib73a2ad1f3c0bda44c24f2417e102bfaa3a13a15
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Not only SECONDARY, but also the following ones:
- NANOKERNEL
- MICROKERNEL
- APPLICATION
Change-Id: Id41fa572c830727166101fa3c6254398857b31c7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of running nm/objdump and parsing the results one testcase
at a time, do these in parallel to speed up sanity check a bit.
The sanitycheck now requires at least Python 3.2 to run because of
the usage of concurrent.futures.
This reduces build time (--all -b) from 4:30 to 3:08 on 24C/48T
Xeon-E5.
Change-Id: I8e7c1efb2f473c7f2b65658f8ed9a101ed091eea
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CoAP observe notifications are originated from server, those
are not replies. So create a new buffer and copy remote address
and port number from obs list. Set udp_conn to null as this is
new buffer. Reason for setting the udp_conn to null is that there
is a chance that buffer might already have udp_conn set due to
reusing same buffers.
Change-Id: I3c7eada987cf539d77ea162b6f5901791cfa6ee0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Need to use the network buffer when sending CoAP serial message
because the message was constructed to net_buf
Change-Id: I74c54178707edf2d8451ce5ac719d63f99661332
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
After removing extra header from IP packet, only uip_len is
updated not ip_buf_len. uip_len parameter is set to zero
at some point after handover to net_core. From net_core
only ip_buf_len holds the actual length. So update ip_buf_len
after removing extra header.
Change-Id: I2cc03ed1125df5216a0fa6e94eebfeee0a343481
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
User can activate debugging in coap observe and well-known by
setting CONFIG_NETWORK_IP_STACK_DEBUG_COAP_OBSERVE and
CONFIG_NETWORK_IP_STACK_DEBUG_COAP_WELL_KNOWN option in config file.
Change-Id: Id63824c88df1a84586518eaec8a8a929ae04b717
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
User can activate debugging in simple UDP and UDP packet by
setting CONFIG_NETWORK_IP_STACK_DEBUG_SIMPLE_UDP and
CONFIG_NETWORK_IP_STACK_DEBUG_UDP_PACKET option in config file.
Change-Id: I581d4b33204f26119c5b194cb367adad8c6505c2
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Without this conn.c will cause logs whenever BLUETOOTH_DEBUG is
enabled.
Change-Id: I03f7d6b5b37e05ca23cba20536b24dbdb850304d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The previous enable/disable API implementations weren't actually what
their names implied, but simply gave the right result for the
initialization scenario when called after each other. Split these into
proper init/enable/disable APIs which do the exact thing that the
names imply.
Change-Id: I09a930d3607f4919ecd889ec3ee4ba8d7b12ee36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When choosing Bluetooth UART driver on arduino_101 select also
BLUETOOTH_NRF51_PM which enables the Nordic chip.
Change-Id: I22dcb60a676bb0e4cdfe995590803dbfbf87f23a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To avoid explicitly having to state this in every application's config
file simply set the defaults to the sanest values.
Change-Id: I2c2bbd2424a12ec9a36bbd6d0c9cd9a1d259e5e5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to check the timer expiration properly. The nano_timer_test()
will return user data to caller if the timer is expired.
The issue that is fixed by this commit started to appear after
the commit 9b2452047d which combined
nano_timers and nano_timeouts.
Change-Id: I9cf10e605f1c4767caa1aad9dcf29a159af55e28
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can activate debugging in REST by setting
CONFIG_NETWORK_IP_STACK_DEBUG_REST_ENGINE option in config file.
Change-Id: I1c1c62803c0fcc5fb3a37d3d76de94754b33506a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When initializing the CoAP engine, make sure that we
initialize the local IP address properly.
Change-Id: I8ddc670371c3a58095cd5db6b435c5b1793c268b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network context must be cleared when CoAP context using that
is removed.
Change-Id: Id8deb798919fccf025af67c18f3a246cfa46598f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print info about packet serialization if debugging is turned on.
Change-Id: I578ecb4e85ab34c74a960cbce9aa4f9bf5b9473d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The routine does not check prefixes properly which are not
multiple of 8.
Change-Id: I421456720541894eb4d9a2839361095a50587513
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can select various coap debugging options from Kconfig.
Change-Id: I97cc82278c230b9678f506063fed5683dc271c8a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the fiber_sleep sleep indefinitely until fiber_wakeup is
called.
Change-Id: Id674c1f689376784599fc79c86d1c406474bb48f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is a complete new cc2520 driver for zephyr. Intention is to fit
better within Zephyr device driver model.
- It's (almost*) ready to be instanciated as many times as necessary
- It's fully interrupt based on SFD and FIFOP (no pin polling)
- It's nicer to other sub-systems (it sleeps, no busy-wait loop)
- It still loosely complies to old legacy radio device driver model
*: GPIO API needs to be fixed in order to accept multiple callbacks, as
well as enabling callbacks to retrieve private data.
Notes:
- Hardware filtering does not work yet as the net stack, above, needs to
provide the relevant information for it (src/dst ieee802154 extended
addresses, short addresses...)
- A embryo of generic functions (txpower, channel, addresses...)
have been implemented but don't belong yet to any radio device driver
model. Such new driver model will come afterwards (soon?)
- SPI API would need to be improved to avoid as much as possible memcpy
as well as spi_slave_select() call.
Change-Id: I1fd6dfff28fba3984f6006d394ea12f1e763ac18
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ieee802154 is a more relevant name. Applying the change in
include/drivers as well.
Change-Id: I7f7188ed0421045d7667303c375eeb8af1298b97
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SENSOR_ATTR_FULL_SCALE attribute now expects the value as radians per
second.
Change-Id: I8082a1f112f1ed8efb511de39e3a8e5ae3d3ed0c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
The ARC application collects temperature, humidity and pressure data from
a set of sensors connected to the Arduino 101 and sends it to the x86 core
through IPM. The collected data is also displayed on a Grove LCD.
The x86 application exposes the received sensor data as a simple Bluetooth
Environmental Sensing Service.
This version of the sample does not offer notifications when the sensor data
values change.
Change-Id: Iee456d5d2455c7ccb7c5923ef3c94ecb20b5cecb
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
As for SECONDS() and MSEC, now sys_clock.h provides a USEC() macro.
Change-Id: I43e8b132d2deeb862d8cfda1f785115f339d6ddb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Corrects response 'result' protocol field to right endianess when
responding to LE L2CAP connection request on error case.
Change-Id: I066bad2f0f3173739676e918f42d425581084dbe
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Clarify the name of the option and add a dependency to Arduino 101
which is the only known board that is currently known to need it.
Change-Id: Ibfb96cba202f34464b45b922da599da70c038d12
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix coding style so line length does not exceed 80 chars.
Change-Id: Iddebdf55593736cfa288a03a750cc927665f9065
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib483419be5199b52cf281b4b106cd8a3be95b7be
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The "initlevel" section is being metioned twice. It does not affect
the final size calculation, but just remove it just for reader's
sanity.
Change-Id: I0e7d6e82c730631d2c83ca09dde0f675805840f3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The configuration option CONFIG_RTC_IRQ_PRI does not longer exist, and have
to use the specific QMSI driver IRQ priority
Change-Id: I8074c6d8e095596d03e51a94f26a73c3a9ff91b7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This function is needed to get next attribute of passed to function
attribute.
Change-Id: Iefe2015f2d6bcb650012b1f9d5b1ea98e8fa8f48
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When Nordic BLE chip is flashed with HCI firmware use H:4 UART driver
and enable chip the same way we enable for NBLE.
Change-Id: Ie14734266803088feadb0d0eb20c49c3615f0267
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The nble nRF51 firmware cannot handle situations where it receives
data before it is ready. The RPC calls otoh cannot be blocking.
Combine this with the fact that bt_enable(NULL) is supposed to be
blocking means we cannot support this mode of operation with nble.
Change-Id: Ib9c2c322b44b04bc48be243c2ba1c1bc4becb8ea
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove UART default configuration to make it default UART_0. This
makes default working fine with Nordic BLE chip using H:4 driver.
Change-Id: Icb6d9f068b586bbf04694bc77ed968211de94c8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactoring Power Management related code to special file nrf51_pm
making it possible to reuse the functions for H:4 UART driver when
Nordic BLE is flashed with HCI firmware.
Change-Id: If389c1f4af13fa786e5866129624527cec0928e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The config option handles enabling, disabling and power management
operations with Nordic nRF51 BLE chip.
Change-Id: I816062a7fb17c9e57c234113a2cecdebceb407b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE code to the place where other Bluetooth drivers code resides.
Change-Id: Ibcf9ffb016e9b842bed66a61dff5c101b1573aaa
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Keep a single bt_storage_* name space for current and future storage
APIs.
Change-Id: If158eb7408cce7c06cd8f98d78a061b9f9585265
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's likely that other files besides hci_core.c will be needing to
read/write the storage. Export it therefore through hci_core.h (same
time adding a missing 'const' to the declaration).
Change-Id: I7c08bc0d69c752bef68f9da9e4aee1acfa00de72
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the wanted address is already programmed to the controller there's
no need to send a HCI command to change it.
Change-Id: Ib73d09cc5b20cd6820e603f0828f000f8310a89e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update RPC headers and change compatible_firmware version 0404.
Change-Id: Ie9920d302f3787c07181bc6aa519a96556463a79
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE pin handling to the driver from gap.c.
Change-Id: I4b7fd408c623971d19da12784c656c5c605852a5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allow to connect Nordic Devkit or dongle to qemu. Simple
configuration for the current NBLE firmware is following:
Connect Nordic board to PC, ttyACMX gets created.
$ socat -x /dev/ttyACMX,raw,b1000000 unix-listen:/tmp/bt-server-bredr
Build app with prj_nble.conf and run with make qemu
Change-Id: I354644b465ad09ab0ca62fbd97f15d9bb3c87d6a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
