Printk should be processed by the logger if RTT logger backend is
used and RTT console. It is not necessary if console has different
transport.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver for STM32's independent watchdog already exists and is
compatible with the stm32l1 SoC. Enable the independent watchdog
for the stm32l1 series for use with this driver.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
Fixes#22207
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an EDT.compat2enabled attribute that maps compatibles to enabled
devicetree nodes that implement them. For example,
EDT.compat2enabled["foo"] is a list of all enabled nodes with "foo" in
the 'compatible' property.
The old Node.instance_no functionality can be implemented in terms of
EDT.compat2enabled, so remove Node.instance_no. EDT.compat2enabled is
more flexible and easier to understand.
Simplify main() in gen_defines.py by using EDT.compat2enabled to
generate the DT_COMPAT_<compatible> existence macros. The behavior is
slightly different now, as DT_COMPAT_<compatible> is generated for
enabled nodes that don't have a binding as well, but that might be an
improvement overall. It probably doesn't hurt at least.
EDT.compat2enabled simplifies the implementation of the new
$(dt_compat_get_str) preprocessor function in
https://github.com/zephyrproject-rtos/zephyr/pull/21560. That was the
original motivation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added delay before starting low frequency clock for the first time to
ensure that anomaly conditions are not met. Delay is configurable and
might be disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Clean up the nRF cmake include file to remove redundant
check for BT_LLL_VENDOR_NORDIC inside the file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adjust the configuration file, disable the SPI
driver and enable the QSPI driver and flash node.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
Most JEDEC NOR flash devices uses not only typical SPI mode
(MISO,MOSI,SCK and CS), but also QSPI mode (IO0,IO1,IO2,IO3,SCK and CS).
QSPI mode uses more data lines and as a result provide higher
throughput. If this were not enough, Nordic chips provide
hardware acceleration for read/write/erase functions, what
gives significant performance boost.
It does a lot of things "behind the scene", i.e when user has written
some data to the flash and would like to read them back, it has to wait
until the flash is ready by reading WIP bit in Status Register.
This driver does it automatically.
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
A configuration file attempted to select the external flash memory for
this platform, but there was no overlay that redefined the storage
partition to be on that device rather than the SOC flash.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This reverts commit 49bd19f3f2,
as the patch it contains is no longer needed after nrfx is updated
to version 2.1.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Added record for describing change of write-block-size
to 32-bits introduced by #19720.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are various situations where it's necessary to support turning
devices on or off at runtime, includin power rails, clocks, other
peripherals, and binary device power management. The complexity of
properly managing multiple consumers of a device in a multithreaded
system suggests that a shared implementation is desirable. This
commit provides an API that supports managing on-off resources.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit fixes a problem where our own IP address
is added to the cache instead of the senders.
This bug was due to a swap of the address in the original packet.
The swapping of the address is now removed.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The rf2xx driver is doing automatic retransmissions in hardware based
on whether ACKs are received or not. Currently the driver is not
invoking ieee802154_radio_handle_ack() as other drivers are doing and
required by OpenThread since 4fe1da9. This add rf2xx_handle_ack method
to ensures required ACK processing when driver performs TX.
Fixes: #21763
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Teardown may fail due to not supported setting of top_value.
Modified to accept not supported case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Lots of style mess in this driver:
- 80 chars limit not followed
- variable allocation and if condition on it should be coalesced
- etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address does not change at runtime, thus storing it directly into
device's config.
Also keeping it consistent in naming: s/port/dev
And no need to store irq_num as it is unused.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be more instance of that driver, and the initialization
function will the same all the time. That was done wrong as it was not
following the device driver rules.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This driver is going to be used by other SoCs and as such should be
easily configurable through DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
irq_enable() can be directly called from relevant irq config function
and thus voids the necessity to store the IRQ number, saving some
memory.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such thing as CAVS DMA IP block, the DMA IP block found on
CAVS based chips is made with DesignWare one.
This will help to centralize DW based DMA device into one driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change to display RSSI and SNR values of the received data.
This change helps to test LoRa's communication distance and
communication quality.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
The sx1276_rx_done() function supports RSSI and SNR.
Change to support RSSI and SNR through sx1276_lora_recv() function.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
The RF2XX driver not always sent ACK when a RX frame requests. This
happen because RF2XX transceiver asserts TRX_END interrupt after
confirm that the FCS is valid. The driver can now decode the frame
but in parallel the radio still processing the ACK frame. This will
sync the radio FSM state to ensure that ACK will be send.
Fixes#21659
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Use f-strings instead of .format() to make the code easier to read,
especially for long multiline strings.
f-strings were added in Python 3.6, which Zephyr requires now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
