.. |
96b_aerocore2
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
96b_argonkey
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_avenger96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_carbon
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_carbon_nrf51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
96b_meerkat96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_neonkey
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_nitrogen
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
96b_stm32_sensor_mez
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
96b_wistrio
|
boards: stm32: Move STM32 boards SPI pin configuration to device tree
|
2020-10-21 06:29:48 -05:00 |
actinius_icarus
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
adafruit_feather_m0_basic_proto
|
boards: adafruit_feather_m0_basic_proto: Add I2C support.
|
2020-10-21 06:46:52 -05:00 |
adafruit_feather_nrf52840
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
adafruit_feather_stm32f405
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
adafruit_itsybitsy_m4_express
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
adafruit_trinket_m0
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
arduino_due
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
arduino_nano_33_ble
|
boards: Add the Arduino Nano BLE 33
|
2021-01-07 09:46:22 -06:00 |
arduino_nano_33_iot
|
drivers: wifi: esp: rename wifi-reset-gpios to reset-gpios
|
2020-10-20 07:32:01 -05:00 |
arduino_zero
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
arty
|
boards: arm: arty: Enable gpio is a feature on board yaml
|
2020-12-13 19:26:36 -05:00 |
atsamd20_xpro
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
atsamd21_xpro
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
atsame54_xpro
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
atsamr21_xpro
|
samples: net: echo_server: Decrease buffer for atsamr21_xpro
|
2020-09-22 16:15:10 -05:00 |
b_l4s5i_iot01a
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
b_l072z_lrwan1
|
boards: b_l072z_lrwan1: Move usb support to device tree
|
2020-11-13 09:22:17 -06:00 |
bbc_microbit
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
bbc_microbit_v2
|
boards: Add BBC MicroBit V2 support
|
2021-01-16 23:06:23 +01:00 |
bcm958401m2
|
driver: uart: ns16550: convert to DT_INST_*
|
2020-03-14 02:22:05 +02:00 |
bcm958402m2_a72
|
drivers: pcie_ep: iproc: shorten file names
|
2020-10-22 11:07:39 +02:00 |
bcm958402m2_m7
|
boards: arm: Add bcm958402m2_m7 board
|
2020-05-08 10:46:23 +02:00 |
bl652_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
bl653_dvk
|
boards: nrf: remove misleading DT overlay docs
|
2021-01-13 07:38:38 -05:00 |
bl654_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
black_f407ve
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
black_f407zg_pro
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
blackpill_f401ce
|
boards: arm: blackpill_f401ce: add blackmagicprobe
|
2020-12-10 06:48:28 -06:00 |
blackpill_f411ce
|
boards: arm: blackpill_f411ce: add blackmagicprobe
|
2020-12-10 06:48:28 -06:00 |
bt510
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
cc26x2r1_launchxl
|
power: Remove residency and states from Kconfig
|
2021-01-22 09:31:20 -05:00 |
cc1352r1_launchxl
|
power: Remove residency and states from Kconfig
|
2021-01-22 09:31:20 -05:00 |
cc1352r_sensortag
|
power: Remove residency and states from Kconfig
|
2021-01-22 09:31:20 -05:00 |
cc3220sf_launchxl
|
boards: doc update for cc32xx and cc13x2/cc26x2 boards
|
2020-09-14 19:14:34 -05:00 |
cc3235sf_launchxl
|
boards: doc update for cc32xx and cc13x2/cc26x2 boards
|
2020-09-14 19:14:34 -05:00 |
circuitdojo_feather_nrf9160
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
colibri_imx7d_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
contextualelectronics_abc
|
boards/arm: Adding Contextual Electronics Advanced BLE Cell board to Zephyr
|
2021-01-07 15:14:23 +01:00 |
cy8ckit_062_ble
|
boards: arm: cy8ckit_062_ble: m0: Add LED and switch
|
2021-01-21 17:33:11 +01:00 |
cy8ckit_062_wifi_bt
|
boards: arm: cy8ckit_062_wifi_bt: m0: Add LED and switch
|
2021-01-21 17:33:11 +01:00 |
decawave_dwm1001_dev
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
degu_evk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
disco_l475_iot1
|
boards: disco_l475_iot1: Enable support for MX25R6435F QSPI NOR
|
2021-01-15 10:29:30 -05:00 |
dragino_lsn50
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
efm32gg_slwstk6121a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32gg_stk3701a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32hg_slstk3400a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32pg_stk3401a
|
boards: arm: Add support for SiLabs EFM32PG1B SLSTK3401A board
|
2021-01-11 10:22:37 -06:00 |
efm32pg_stk3402a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32wg_stk3800
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efr32_radio
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
efr32mg_sltb004a
|
device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE
|
2021-01-15 07:16:21 -06:00 |
faze
|
boards: faze: enable EEPROM support
|
2020-09-14 12:47:32 -05:00 |
frdm_k22f
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
frdm_k64f
|
device: Remove DEVICE_DT_DECLARE / DEVICE_DT_INST_DECLARE
|
2021-01-15 07:16:21 -06:00 |
frdm_k82f
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
frdm_kl25z
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
frdm_kw41z
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
google_kukui
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
hexiwear_k64
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
hexiwear_kw40z
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
holyiot_yj16019
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
ip_k66f
|
dsa: ip_k66f: Enable support for KSZ8794 DSA device on ip_k66f board
|
2021-01-20 10:03:42 +02:00 |
lpcxpresso11u68
|
boards: lpcxpresso11u68: enable BUILD_OUTPUT_HEX
|
2020-09-14 12:47:32 -05:00 |
lpcxpresso55s16
|
doc: Add clock control details
|
2020-10-15 11:17:24 -05:00 |
lpcxpresso55s28
|
boards: arm: Add LPCXpresso55S28 dev board
|
2021-01-05 15:38:04 -06:00 |
lpcxpresso55s69
|
boards: lpcxpresso55s69: doc memory mappings
|
2021-01-10 15:38:54 -05:00 |
lpcxpresso54114
|
doc: Add clock control details
|
2020-10-15 11:17:24 -05:00 |
mec15xxevb_assy6853
|
power: Remove residency and states from Kconfig
|
2021-01-22 09:31:20 -05:00 |
mec1501modular_assy6885
|
power: Remove residency and states from Kconfig
|
2021-01-22 09:31:20 -05:00 |
mec2016evb_assy6797
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
mercury_xu
|
boards: arm: add suport for Enclustra Mercury XU boards
|
2020-12-27 18:16:00 +01:00 |
mikroe_clicker_2
|
boards: MikroE Clicker 2: Added board
|
2020-11-30 15:50:59 +01:00 |
mikroe_mini_m4_for_stm32
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
mimx8mm_evk
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
mimxrt685_evk
|
boards: MXRT600: Increase the core frequency
|
2020-11-13 12:03:47 -06:00 |
mimxrt1010_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mimxrt1015_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mimxrt1020_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mimxrt1024_evk
|
board: arm: Add board support for mimxrt1024_evk
|
2021-01-21 14:50:45 -05:00 |
mimxrt1050_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mimxrt1060_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mimxrt1064_evk
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mm_swiftio
|
boards: soc: arm: Set zephyr,itcm chosen node for i.MX RT boards
|
2021-01-15 14:51:20 +01:00 |
mps2_an385
|
mps2_an385: use default stack sizes
|
2020-09-08 17:23:17 -04:00 |
mps2_an521
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
msp_exp432p401r_launchxl
|
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
|
2020-04-27 19:03:44 +02:00 |
npcx7m6fb_evb
|
boards: arm: npcx7m6fb_evb: An example for low-voltage feature.
|
2021-01-18 19:09:34 +01:00 |
nrf51_ble400
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf51_blenano
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf51_vbluno51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf51dk_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf51dongle_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52_adafruit_feather
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52_blenano2
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52_sparkfun
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52_vbluno52
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf52dk_nrf52805
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52dk_nrf52810
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52dk_nrf52832
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf5340dk_nrf5340
|
boards: nrf5340dk: Configure RPMsg Service
|
2021-01-19 22:07:09 +01:00 |
nrf9160_innblue21
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf9160_innblue22
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf9160dk_nrf9160
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
nrf9160dk_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf21540dk_nrf52840
|
boards: nrf21540dk_nrf52840: Fix minor imperfections in documentation
|
2021-01-14 21:43:43 +01:00 |
nrf52832_mdk
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52833dk_nrf52820
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52833dk_nrf52833
|
boards: nrf: remove misleading DT overlay docs
|
2021-01-13 07:38:38 -05:00 |
nrf52840_blip
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52840_mdk
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52840_papyr
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840dk_nrf52811
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840dk_nrf52840
|
boards: nrf: remove misleading DT overlay docs
|
2021-01-13 07:38:38 -05:00 |
nrf52840dongle_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nucleo_f030r8
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f070rb
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f091rc
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f103rb
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f207zg
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f302r8
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f303k8
|
board: arm: add support for the nucleo_f303k8 board
|
2020-12-20 10:14:03 -05:00 |
nucleo_f303re
|
boards: arm: nucleo_f303re
|
2021-01-21 14:29:40 -06:00 |
nucleo_f334r8
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f401re
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f410rb
|
boards: arm: added support for nucleo_f410rb
|
2021-01-13 09:07:52 -05:00 |
nucleo_f411re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f412zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f413zh
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f429zi
|
boards: nucleo_f429zi: Fix arduino header pin D4
|
2020-11-19 12:40:20 +01:00 |
nucleo_f446re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f746zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f756zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f767zi
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_g071rb
|
boards: nucleo_g071rb: enable adc support
|
2021-01-07 15:50:22 -06:00 |
nucleo_g431rb
|
boards: arm: stm32g4xx add rtc feature on the nucleo board
|
2021-01-06 08:09:47 -06:00 |
nucleo_g474re
|
boards: arm: stm32g4xx add rtc feature on the nucleo board
|
2021-01-06 08:09:47 -06:00 |
nucleo_h723zg
|
boards: nucleo_h7: Remove --use-elf runner instruction
|
2020-12-03 11:33:20 -05:00 |
nucleo_h743zi
|
board: fix led1 on nucleo_h743 platform
|
2021-01-10 15:40:25 -05:00 |
nucleo_h745zi_q
|
boards: nucleo_h7: Remove --use-elf runner instruction
|
2020-12-03 11:33:20 -05:00 |
nucleo_l4r5zi
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l011k4
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l031k6
|
boards: arm: add support for nucleo-l031k6 board
|
2020-11-13 10:01:06 -06:00 |
nucleo_l053r8
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l073rz
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l152re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l432kc
|
boards: stm32: Remove default PWM configuration
|
2021-01-07 15:46:43 -06:00 |
nucleo_l433rc_p
|
boards: arm: add support for NUCLEO-L433RC-P
|
2021-01-05 09:39:41 -06:00 |
nucleo_l452re
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l476rg
|
boards: stm32: Remove default PWM configuration
|
2021-01-07 15:46:43 -06:00 |
nucleo_l496zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l552ze_q
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
nucleo_wb55rg
|
boards: arm: stm32 nucleo boards support dma feature
|
2020-12-27 18:16:47 +01:00 |
nuvoton_pfm_m487
|
board: arm: add support for nuvoton pfm m487
|
2020-07-01 21:09:25 +02:00 |
olimex_stm32_e407
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_h103
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_h407
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_p405
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimexino_stm32
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
particle_argon
|
boards: particle: use soft reset with nrfjprog
|
2021-01-04 20:42:17 -05:00 |
particle_boron
|
boards: particle: use soft reset with nrfjprog
|
2021-01-04 20:42:17 -05:00 |
particle_xenon
|
boards: particle: use soft reset with nrfjprog
|
2021-01-04 20:42:17 -05:00 |
pico_pi_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
pinetime_devkit0
|
boards: arm: pinetime_devkit0: Fix docs and config
|
2020-11-17 16:37:28 -05:00 |
pinnacle_100_dvk
|
boards: remove has-be32k from SPI NOR mtd nodes
|
2021-01-13 11:58:37 -06:00 |
qemu_cortex_a53
|
drivers: PSCI: Add driver and subsystem
|
2021-01-18 19:06:53 +01:00 |
qemu_cortex_m0
|
sys: util: Replace MIN(MAX(a, b), c) with CLAMP
|
2020-11-05 12:12:17 +01:00 |
qemu_cortex_m3
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
qemu_cortex_r5
|
boards/qemu_cortex_r5: Adjust clock rates
|
2020-10-29 07:39:39 -04:00 |
quick_feather
|
boards: arm: quick_feather: add platform documentation
|
2021-01-19 15:40:43 -05:00 |
rak5010_nrf52840
|
boards: nordic: remove unnecessary nrfjprog.py args
|
2021-01-06 07:54:55 -06:00 |
reel_board
|
boards: reel_board: remove non-minimal peripherals
|
2020-12-15 15:37:18 -06:00 |
ruuvi_ruuvitag
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
sam4e_xpro
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam4l_ek
|
boards: arm: sam4l_ek: Enable gpio tests
|
2020-12-02 11:48:43 -06:00 |
sam4s_xplained
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam_e70_xplained
|
boards: sam_e70_xplained: default enable EEPROM source for MAC address
|
2020-12-28 13:07:46 +02:00 |
sam_v71_xult
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
seeeduino_xiao
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
segger_trb_stm32f407
|
boards: arm: Add support for SEGGER TRB STM32F407
|
2020-10-06 12:17:26 -04:00 |
sensortile_box
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
serpente
|
tests/samples: add samples for Serpente board
|
2020-09-04 09:25:02 -05:00 |
steval_fcu001v1
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32_min_dev
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f0_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f3_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32f4_disco
|
boards: stm32: Remove default PWM configuration
|
2021-01-07 15:46:43 -06:00 |
stm32f030_demo
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f072_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f072b_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f103_mini
|
boards: arm: Add stm32f103_mini board
|
2020-12-03 10:54:38 -06:00 |
stm32f411e_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32f412g_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f429i_disc1
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f469i_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f723e_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f746g_disco
|
boards: arm: stm32: Adjust maximum speed for STM32F746G disco board
|
2021-01-20 08:08:11 -06:00 |
stm32f769i_disco
|
boards: stm32f769i_disco: Add SDMMC Support
|
2020-11-18 14:33:16 -05:00 |
stm32g0316_disco
|
drivers: gpio: stm32: use generic LL headers
|
2020-11-30 15:50:03 +01:00 |
stm32h747i_disco
|
boards: stm32h747i_disco: fix SDRAM pinctrl
|
2020-12-19 16:58:30 -05:00 |
stm32l1_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32l476g_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32l496g_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32l562e_dk
|
boards: stm32l562e_dk: Enable SPI and BLE
|
2020-12-14 13:16:10 -05:00 |
stm32mp157c_dk2
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32vl_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm3210c_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32373c_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
thingy52_nrf52832
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
twr_ke18f
|
boards: arm: twr_ke18f: add pinmux configuration for PWT testing
|
2021-01-20 08:05:57 -06:00 |
twr_kv58f220m
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
udoo_neo_full_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
usb_kw24d512
|
boards: arm: nxp: kinetis: Convert pinmux to new DT based names
|
2020-12-18 07:52:52 -06:00 |
v2m_beetle
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
v2m_musca
|
arm: v2m_musca: Mark Musca-A board support deprecated for 2.6.0
|
2020-10-21 07:23:22 -05:00 |
v2m_musca_b1
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
v2m_musca_s1
|
arm: V2M Musca-S1: Update board's index.rst file
|
2020-12-20 13:03:49 -05:00 |
warp7_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
waveshare_open103z
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
xmc45_relax_kit
|
boards: arm: xmc45_relax_kit: minor doc fixes
|
2020-06-02 15:14:45 +02:00 |
index.rst
|
doc: fix sidebar nav issues with board docs
|
2017-06-27 19:21:29 -04:00 |