Add an option to enable the secondary chained buffer mechanism for
the RX direction to improve its ability to adapt to high SPS rates
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Clean code, update clock calculation to avoid wrong truncate when
mixing double and integer calculation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Clean up i2s_configure flow
Use singleton active configuration instead of concurent for each
stream buffer
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
The .tm_clone_table section used SECTION_PROLOGUE instead of
SECTION_DATA_PROLOGUE, causing VMA/LMA offset mismatch on XIP systems.
When the linker adds alignment padding to VMA but not LMA,
arch_data_copy() places all subsequent data at wrong addresses,
corrupting pointer-containing structures like usbd_context.
Fix by using SECTION_DATA_PROLOGUE which adds ALIGN_WITH_INPUT,
ensuring padding is synchronized between VMA and LMA.
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
CONFIG_SPI_NOR_SFDP_RUNTIME is now
by default used, when when the dt requirements
are not fullfilled for the other 2 options, therefore
we lo longer need to set it here.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add dependencies for the dt props for the
SPI_NOR_SFDP choice.
Also removes the no no longer needed build asserts.
Nice benefit is, that we fallback to SPI_NOR_SFDP_RUNTIME,
if the required dt props for the other options are not set.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The MSPI API exposes xfer.packets as const, but the driver assigned
it to a non-const pointer, triggering -Wdiscarded-qualifiers.
Update packet to be a const struct mspi_xfer_packet * and remove
the cast.
No functional changes.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add a platforms allowed list to enable CI testing on
these specific boards.
Note: Since MSPI is still in the experimental phase,
there is no depend_on: mspi because we cannot yet add MSPI
as a supported peripheral in <board_name>.yaml.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
- Add the missing 'clock-frequency' property in the STM32 MSPI Flash
sample overlay to satisfy the requirements of the
st,stm32-ospi-controller Devicetree binding.
- Fix a coding style issue :Hex values must be lowercase
Fixes Devicetree error during sample build.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Rename FLASH_SIZE(inst) to FLASH_SIZE_INST(inst) and
FLASH_PAGE_SIZE(inst) to FLASH_PAGE_SIZE_INST(inst) in
flash_mspi_nor_sfdp.h to avoid redefinition conflicts with
STM32 HAL headers (stm32l562xx.h and stm32l5xx_hal_flash.h).
Note: Several HAL STM32 files use this macro naming convention;
this issue is not specific to STM32L5.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
The WCH Chips have the option to trade extra RAM for zero-waitstate Flash.
These configurations are added as board variants.
Signed-off-by: James Bennion-Pedley <james@bojit.org>
Adds enabled Ethernet to CH32V307 dev kit.
This ensures that the Ethernet driver is built in twister tests.
Signed-off-by: James Bennion-Pedley <james@bojit.org>
This adds initial support for the CH32V ethernet peripheral.
The driver supports both internal and external PHY configurations.
Signed-off-by: James Bennion-Pedley <james@bojit.org>
This reverts commit 1993ea019b because the
`parse_syscalls.py` script has been modified to not output whitespace
characters other than spaces in the generated JSON file.
Signed-off-by: Loek Le Blansch <loek.le-blansch.pv@renesas.com>
Syscall regex matches may include whitespace characters other than space
(i.e. `\n` or `\t`), which causes `gen_syscalls.py` to fail. This mainly
affects long system call signatures wrapped onto multiple lines (e.g. by
code formatter). This change replaces all successive whitespace in the
regex match groups with a single space.
Signed-off-by: Loek Le Blansch <loek.le-blansch.pv@renesas.com>
Integrate CHRE fix which avoids a warning with newer compilers due to
including a deprecated header.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adding myself as a collaborator to the infineon platform, i2s driver,
and audio drivers. I have contributed i2s and dmic drivers for infineon
hardware and will continue to contribute in this area.
Signed-off-by: Brett Peterson <brett.peterson@infineon.com>
The infineon i2c driver will lock the calling thread on an error event
because the transfer semaphore is never released. This change allows the
driver to recover and resume normal operation.
Signed-off-by: Brett Peterson <brett.peterson@infineon.com>
Some times, additional transforms such as rotation, color conversion,
decoding need to be applied on the video frame before displaying it.
This is to add support for such a transformation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Drop the redundant selection setting in app_setup_video_selection() as
it will be done later in app_setup_video_format()
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Improve AVRCP shell commands by adding success messages after
operations complete, including passthrough (PRESSED/RELEASED)
and get_caps command.
Signed-off-by: Make Shi <make.shi@nxp.com>
With USE_SWITCH enabled, _ARM_M_SWITCH is defined and struct
_callee_saved becomes empty resulting in build failures with
CONFIG_EXTRA_EXCEPTION_INFO=y which expects callee-saved registers to be
present.
Remove the _ARM_M_SWITCH guard so the structure always contains the
callee-saved registers. This allows Cortex-M builds using USE_SWITCH
to enable CONFIG_EXTRA_EXCEPTION_INFO without compilation failures.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add support for the IPT in the CS reflector subfeature
in the Bluetooth host stack.
Signed-off-by: Aleksandr Mirlenko <aleksandr.mirlenko@nordicsemi.no>
Introduce enum pm_device_deps_region to replace the magic number
used when iterating through device dependency array regions in
power_domain_add_or_remove().
Signed-off-by: Yongxu Wang <yongxu.wang@nxp.com>
Max32 PWM already has built-in support for interrupts at the end of
each PWM period so added baseline support for the PERIOD event type
in CONFIG_PWM_EVENT. Updated PWM Event sample to support
Max32672EvKit.
Signed-off-by: Ryan Wiebe <ryan.wiebe@analog.com>
Add myself as collaborator to help with reviews and occasional
contributions for the Bouffalo Labs SoC peripherals, configurations,
and HAL.
Signed-off-by: William Markezana <william.markezana@gmail.com>
Add Realtek Bee Platforms section and assign ZhiyuanTang17 as
the maintainer for related source files and documentation.
Signed-off-by: Zhiyuan Tang <zhiyuan_tang@realsil.com.cn>
