Fix the ASYNC DMA API on the lpspi driver and actually make the entire
driver go through that path. Rather than having an orthogonal
internally synchronous path we can just have both APIs go through the
same asynchronous path and just use wait_for_completion from spi context
to implement either sync or async.
Also make DMA driver default y if dependency (an lpspi having dmas
property) is met.
And lpspi_wait_tx_fifo_empty can be shared between drivers.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector. Compared to
the base model, this TFT variant additionally comes with a 240x135 pixel
IPS TFT color display.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
The Adafruit Feather ESP32S3 is a development board in the Feather
standard layout, sharing peripheral placement with other devices labeled
as Feathers or FeatherWings. The board is equipped with an ESP32-S3 mini
module, a lithium ion battery charger and a USB-C connector.
Signed-off-by: Leon Rinkel <leon@rinkel.me>
On top of enabling and allowing test entropy sources, enable
CONFIG_ENTROPY_GENERATOR so that a real driver and entropy source gets
used if available.
This is needed for some PSA Crypto implementations that have random number
generation conditionally compiled in.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Some implementations require more stack than others.
Increase the Ztest and main stack sizes to accommodate them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a Kconfig option to match the Mbed TLS define
instead of defining it based on CONFIG_SECURE_STORAGE.
This gives more flexibility regarding the potential re-definition of the
CONFIG_MBEDTLS_PSA_CRYPTO_STORAGE_C Kconfig option.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Use dynamic allocation for key material for
better compatibility as a fully static key store is a new
feature that not all PSA Crypto implementations support.
Explicitly enable CONFIG_MBEDTLS_ENABLE_HEAP to ensure that Mbed TLS uses
heap for the PSA keys' data (instead of failing at runtime).
This will turn off CONFIG_MBEDTLS_PSA_STATIC_KEY_SLOTS, making the
implementation default to dynamic key slots.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Explicitly enable CONFIG_ENTROPY_GENERATOR instead of relying on the
build system's defaults.
This:
- Makes sure the filtering works properly between entropy_driver and
entropy_not_secure test scenarios for the samples.
- Helps with TF-M builds in certain scenarios where key generation (via
`psa_generate_key()`) would fail due to the RNG functionality being
disabled.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The psa_key_attributes_t type is implementation-defined according to
the PSA Crypto spec.
Compare its fields individually instead of doing a memcmp() over the
entire struct.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Explicitly set the TF-M profile to not rely on the build system defaults
which might differ.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Ignore bootstrap 'transition done' state transition
(ENGINE_BOOTSTRAP_TRANS_DONE) from an invalid state. The client must be
in state ENGINE_BOOTSTRAP_REG_DONE to process a bootstrap finish command
received from the server.
The LwM2M client does not implement CoAP deduplication (rfc 7252,
section 4.5) and retransmissions of the bootstrap finish command `/bs`
would restart the registration client with undesired side effects.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
Set the default maximum argument count for the shell to 30
when the Wi-Fi shell is enabled, to ensure all Wi-Fi
commands work without failure.
Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no>
Updates the GitHub security page with the current supported versions
after the v4.1.0 release.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit changes log level for already registered callback from
warning to debug as this is cause unnecessary noise and doesn't indicate
actual issue. Caller gets a certain error code for this case which can
be handled properly.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fixes a regression caused by: 88830a3b
The ns16550 driver should handle possibility of
clock_control_on being a stub (i.e. returning ENOSYS)
Signed-off-by: Dominik Lau <dlau@antmicro.com>
There are in-tree clock controllers that don't implement the `on`/`off`
calls, e.g. in Intel Agilex. Let's return `-ENOSYS` when that's the case.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
- Test all attribute combinations of Vishay sensor VEML6031 which is an
ambient light sensor.
- Print out saturation case of sensor.
- Idea is to be able to find a good combination of attributes for an
optimal working area.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
- add driver for Vishay VEML6031 High Accuracy Ambient Light Sensor.
- add new compatible "vishay,veml6031".
- read and write consecutive 8 bit registers as bulk operation.
- add driver to build all test of sensors.
- support fetch and get.
- triggered mode and interrupt is not yet supported.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Add the display_clear function in the display
subsystem to clear the target devices screen
display by resetting it to white.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Implement the '.clear' interface in the SDL driver
to allow the upper layers to use the display_clear
function.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Add a display_clear function to the display subsystem
to clear the target devices screen display. Introduce
a clear interface at the driver layer to implement
the display_clear function.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Enable execution of dmic_api test on nrf54l15:
- add 'dmic' to the list of supported peripherals;
- add overlay for nrf54l15;
- align Nordic's implementation of PDM driver to pass the test.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Adding a test case for stepper driver implementation of
allegro a4979 microstepping programmable stepper motor driver.
Signed-off-by: Verena Schweinstetter <verena.schweinstetter@zeiss.com>
Adding a stepper driver implementation for allegro a4979
microstepping programmable stepper motor driver.
The implemenation was tested using the drv8424/api testsuite.
Signed-off-by: Verena Schweinstetter <verena.schweinstetter@zeiss.com>
Add interrupt controller driver support for RZ/N2L
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Add serial driver support for RZ/N2L
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/N2L
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
The i2c_transfer() API allows multiple msgs objects to be carried in a
transaction. After handling the current msgs object in the interrupt
context, the driver notifies the calling thread to buffer the next
msgs object and generate the Re-Start if required.
However, if the calling thread is preempted by higher priority threads,
the I2C transaction time may become non-deterministic (depending on the
execution time of higher-priority threads). This commits modifies the
driver to handle msgs objects entirely in the interrupt context to
improve the I2C transfer efficiency..
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
- Added definitions for LAN8742 PHY registers and bit masks
to support auto-negotiation.
- The function `eth_init_api_v2` requires the Ethernet interface
to be properly initialized. In auto-negotiation mode,
it reads the speed and duplex settings to configure
the driver accordingly.
- Implemented functions to get link state and configure speed
and duplex mode based on auto-negotiation results.
- Ensured proper initialization of semaphores and MAC configuration
for both auto-negotiation enabled and disabled scenarios.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add DMA driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
There is a corner case that the channel is in disconnecting status,
due to there is a disconnect request sent from peer.
At this time, the channel is status is `BT_L2CAP_CONNECTED`. But it
has been removed from `conn->channels` by calling the function
`l2cap_br_remove_tx_cid`.
And the disconnect event is notified upper layer via the callback
`ops->disconnected`. The thread of the callback context is blocked
due to the the calling of `printk` in the callback function.
Then the pending lower priority thread, sending the data in this
l2cap channel, is activated. Then in the function
`bt_l2cap_br_send_cb`, a NULL pointer will be got according to the
given CID. And unexpected behavior happens when accessing a NULL
pointer, since the invalid channel pointer is not checked in
function `bt_l2cap_br_send_cb`.
Check the channel pointer after function `bt_l2cap_br_lookup_tx_cid`
called. If the channel pointer is invalid, return error code
`-ESHUTDOWN` directly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
