Add information about "struct net_linkaddr" changes to 4.2
migration guide to help the developers to handle issues if
they access the net_linkaddr struct fields directly in their
code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Previously the net_linkaddr struct had pointers to the link address.
This is error prone and difficult to handle if cloning the packet as
those pointers can point to wrong place. Mitigate this issue by
allocating the space for link address in net_linkaddr struct. This will
increase the size of the net_pkt by 4 octets for IEEE 802.15.4 where the
link address length is 8, but there no increase in size if link address
is 6 bytes like in Ethernet/Wi-Fi.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that source and destination link addresses are correct
after cloning and pulling net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is to fix the below compiler warning from TF-M builds
that don't use the Ethos-U driver.
```
CMake Warning:
Manually-specified variables were not used by the project:
ETHOS_DRIVER_PATH
```
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
IAR doesn't support the __volatile__ keyword, and since the
toolchain.h isn't included by these arm-specific files and
other arm-specific files already uses volatile, I've made
them all use volatile.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
Due to historical reasons, there were two implementations of
R7FA4M1AB3CFM. However, the migration has been completed,
so the old one is now being removed.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Extract common parts from `dts/arm/renesas/ra/ra4/r7fa4m1ab3cfp.dtsi`
to support R7FA4M1AB3CFM.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add Kconfig options in Broadcast ISO related samples to
support enabling interleaved packing use in subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function `bt_br_bond_exists()` to check if the address of the
classic device has been bonded.
Update release-notes-4.2.rst
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
- adds the ability to change the NVS sample "Maximum reboot counter",
"Reboot countdown" and its "Sleep time" parameters via Kconfig,
without manually modifying the source code.
- reduces the default number of resets to 5 (was 400).
- adds the ability to reduce flash memory wear on real devices
by reducing the number of write iterations.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- Allocate source in PBP first time adv is created
- Only set_adv_data in adv_setup if ext_adv already exists
- Fixes regression in PTS for PBP tests
Signed-off-by: Alexander Svensen <alexander.svensen@nordicsemi.no>
Fix that a lwm2m message is reset without executing a registered
callback on lwm2m_engine_context_close.
Signed-off-by: Sebastian Schoch <sebastian.schoch@husqvarnagroup.com>
The API has not changed since it was introduced so should no longer be
considered experimental.
Signed-off-by: Timothy Keys <timothy.keys@nordicsemi.no>
Define the partition layout in nucleo_f413zh.dts to handle what
can be built in the application directory following the same
pattern used in the nucleo_f401re.dts but scaled for 2 sectors
of 128KB for the slots.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Instead of requiring the edata struct, just receive full-scale
parameter. This simplifies the decoding process for FIFO data
during streaming.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The current default RAT configuration puts the first 512MB of
address space on top of the first 512MB of DRAM. This DRAM
can include the carveout region assigned for IPC with the
host core, for instance the M4 on AM62 uses 0x9cc00000.
Split this first translation from 0x80000000 to 0x60000000 and
0xc0000000. Shrink the 0x40000000 translation and move down
to 0x70000000. This provides the same system IP coverage without
blocking access to the first 512MB of DRAM.
While here, fix typo with leading 0 for a couple BASE_ADDR
translations, no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
This reverts commit 99e7223a1c.
Breaks CI with the following compilation error in SPI.c:52:
error: 'SPI_MASTER' undeclared here (not in a function)
Failing tests (cc3220sf_launchxl/cc3220sf)
- sample.net.sockets.echo.offload.simplelink
- sample.net.sockets.http_get.offload.simplelink
- sample.net.wifi
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Zephyr GPIO drivers require the pin mask `struct gpio_driver_data` to be
the first element of the driver config. Reordering fixes failures in ASSERT
statements of the GPIO driver due to the base address being interpreted as
supported pin mask.
Signed-off-by: Mika Braunschweig <mika.braunschweig@siemens.com>
In regards to the contributions to stepper driver subsystem, i would like
to propose Jan Behrens as collaborator in stepper driver subsystem
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Briefly describe the main features of the charger.
Also, provide an example of how the charger can be placed
as a child node within device tree.
On the other hand, detail the meaning the of the properties,
including their range.
Signed-off-by: Kiara Navarro <knavarro@paltatech.com>
Add serial driver support for Renesas RZ/T2L
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
This is the initial commit to support PINCTRL driver for Renesas RZ/T2L
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
The following pairs of peripherals mistakenly used the same
interrupts numbers, causing issues if both are used: sci6/sci9,
spi0/sci7 and spi1/sci8.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
- It seems that the mask variants of GPIO functions are not present in
the latest sdk, so replace those with direct register access.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Add a security section in the external source code issue template
requesting information about known vulnerabilities and cryptographic
usage.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
The thread metric cooperative benchmark had a subtle flaw on
SMP enabled systems. The reporting/main thread was running at
a higher priority than the "cooperative" threads. When that
reporting thread woke up from its 30 second sleep, there was a
chance that it would change the ordering of the "cooperative"
threads before the test expected it.
This ordering change is not present on UP systems as the current
thread is always in the ready queue. However, on SMP systems the
current thread is not in the ready queue and is re-added to the
end of the list when it is preempted by a higher priority thread.
To work around this, we make the priority of the main/reporting
thread to be the same as the "cooperative" threads. Thus when
the reporting thread wakes, it is added to the end of list and
no longer introduces an unexpected schedule point.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Define macros for encryption value,
#define BT_HCI_ENCRYPTION_OFF 0x00
#define BT_HCI_ENCRYPTION_ON_LE_AES_CCM 0x01
#define BT_HCI_ENCRYPTION_ON_BR_E0 0x01
#define BT_HCI_ENCRYPTION_ON_BR_AES_CCM 0x02
Use the macros to replace the hard code.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
