The phandle property is auto-generated when parsing the DTS, so there is
no 'source information'. This commit sets the filename and line number
of the phandle property to be the same as the first reference to the
target node.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Update the manifest for the 'zephyr-lang-rust' module to include
the commit that adds support for comments in the Rust DTS parser.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Since it's directly related (we can't just burst-read the fifo at
once). This patch includes a comment block explaining this rationale.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Allow for users to define the fifo-watermark on a per-instance basis
through device-tree properties. This setting is validated at build
time, so missing it when required, or setting an invalid value should
not end up in a run-time errror (as in: it runs but nothing happens).
Signed-off-by: Luis Ubieda <luisf@croxel.com>
This patch fixes previous overriding of ODR setting through DTS (it
would always be 25-Hz, irrespective of what the DTS property said).
While doing so, create dt-binding enum to improve settings clarity.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Reverse the changes the affected API and add adjust the sample to the new
dynamic and static variations.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
A previous PR merged (to remove runtime observers' dependency with heap)
added inconsistencies and compatibility breaks to the zbus. This commit
improves that by removing the inconsistencies and still attending to the
features requested by the community.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The new ace30 files structure is organized as follows:
intel_adsp_ace30.dtsi - main file for all variants
intel_adsp_ace30_ptl.dtsi - additional file for PTL variant
intel_adsp_ace30_wcl.dtsi - additional file for WCL variant
The main ace30.dtsi file contains most of the fields,
with only the differences specified in the ace30_ptl.dtsi
and ace30_wcl.dtsi files.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
use public queue methods to clear queue on failure
-s Felix Behnke felixbeiderarbeit@gmail.com
Signed-off-by: Felix Behnke <felixbeiderarbeit@gmail.com>
Add Variscite DART-MX8M-PLUS board support. This SoM is based on NXP's
i.MX8M Plus SoC. It includes Cortex-A53 and Cortex-M7 support.
Signed-off-by: Andre Morishita <andre.m@variscite.com>
The image_def header shall not be added to apps that are booted by a
bootloader, e.g. mcuboot. Added proper handling for UF2 by hanan619.
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
Some NXP boards are using legacy SDK driver, such as S32K, K64, MIMX8Q,
and so on. The legacy SDK driver will not be updated, migrate to use
SDK NG driver.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Avoid the following exception in the Identity test when the commit body
is empty:
Traceback (most recent call last):
File "zephyr/scripts/ci/check_compliance.py", line 2053, in main
n_fails = _main(args)
^^^^^^^^^^^
File "zephyr/scripts/ci/check_compliance.py", line 1988, in _main
test.run()
File "zephyr/scripts/ci/check_compliance.py", line 1459, in run
auth_name, auth_email, body = git(
^^^^^^^^^^^^^^^^^^^^^^^^^^^
ValueError: not enough values to unpack (expected 3, got 2)
This is triggered because ``%b`` represents the body of the commit
message, which can be empty if there's a single line in it, because the
first line is considered the title.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rework renesas rcar_salvator_xs doc to meet what has
been done for the documentation of other rcar boards.
Also take advantage of these new boards documentation
features:
- zephyr:board
- zephyr:board-supported-hw
- zephyr:board-supported-runners
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Edit the rcar_salvator_xs board full_name
from specific A57 name to generic one
to meet names used by other rcar boards
and unify this boards range documentation.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Rework renesas rcar_salvator_x doc to meet what has
been done for the documentation of other rcar boards.
Also take advantage of these new boards documentation
features:
- zephyr:board
- zephyr:board-supported-hw
- zephyr:board-supported-runners
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Edit the rcar_salvator_x board full_name
to meet names used by other rcar board
and unify this board range documentation.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Merge both dedicated r52 and a55 spider_s4 boards doc
into an all-in-one documentation and take advantage
of these new boards documentation features:
- zephyr:board
- zephyr:board-supported-hw
- zephyr:board-supported-runners
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Edit the rcar_spider_s4 board full_name
from specific A55 name to generic one
as it is used as main name for the whole board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Merge both dedicated r7 and a57 h3ulcb boards doc
into an all-in-one documentation and take advantage
of these new boards documentation features:
- zephyr:board
- zephyr:board-supported-hw
- zephyr:board-supported-runners
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Edit the rcar_h3ulcb board full_name
from specific A57 name to generic one
as it is used as main name for the whole board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
The first 1 KB is reserved for the NWP (Network Coprocessor). This
change also resolves the null pointer error issue, as a .data or a
_ramfunc might get the address 0x0.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
The nRF52840 Preview development kit is no longer available and the
text in the README.rst is changed to be "nRF52840 Development kit" and
the link to the documentation is changed to point to the production
version.
Signed-off-by: Ole Sæther <ole.saether@nordicsemi.no>
