When GPD is enabled, the pinctrl driver enables pin retention if the
peripheral is in the FAST_ACTIVE1 domain. This seems to break CAN, so
make sure retention is not active.
Investigations on why this is needed are ongoing, however, this makes
CAN functional again with some minor changes.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is necessary to suppress CMake build warning due to no source file
defined for drivers__serial.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
If BT_ISO_BROADCAST is enabled, then we shall support
at least 1 BIG and at most BT_EXT_ADV_MAX_ADV_SET since
each BIG requires its own advertising set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The coap_client.h header won't build if included from c++ file:
error: expected primary-expression before ‘.’ token
.value[0] = coap_bytes_to_block_size(CONFIG_COAP_CLIENT_BLOCK_SIZE),
Therefore move the actual function implementation to the library C file
to prevent this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Developer reports build error when he uses LOG_RAW in his code
and disables logging in prj.conf using CONFIG_LOG=n.
Add test case for above described scenario.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
The 'log_flush()' function is used to wait for all pending log messages
to be processed by the background thread. This is performed by polling
the 'log_data_pending()' function, which scans all available buffers.
The log core already provides a 'buffered_cnt' variable that keeps track
of the number of pending messages. This variable is updated atomically
and could be a more efficient implementation for that check.
This commit moves the 'buffered_cnt' decrement _after_ the message
processing and buffer release, to ensure that the variable reflects
the number of pending messages at any moment in time.
The 'log_data_pending()' function is then replaced with a direct check
of the 'buffered_cnt' variable.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Added new parameter "A" in wifi connect command to support
CA certificate used or CA certificate skipped for
EAP-TTLS-MSCHAPV2 and EAP-PEAP-MSCHAPV2.
Signed-off-by: Qingling Wu <qingling.wu@nxp.com>
Add new item ulps_control in binding. If the MIPI DSI on the SoC support
ULPS, and user set the bus to enter ULPS after transfer in mipi_dsi_msg,
driver will set the bus to enter ULPS.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
Remove START_PENDING flag, and replace with
bt_mesh_adv_is_empty_by_tag
not only make adv_ext.c more readable, but also enhancement
In previous implementation, after proxy started, will check
this flag, and when the flag is true, will direct stop proxy
and re-enter schedule, but has one problem, this flag set true,
but buf will be empty, such as when sending mesh relay messages
will for-each every sets, until find not-active, but also set
previous set START_PENDING flags, so will cause proxy advertising
started->stop->started.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The first why introduce ADV_FLAG_PROXY_START
see here(https://github.com/zephyrproject-rtos/zephyr/pull/58826)
The main core change is to mark ADV_FLAG_PROXY as moving to the last
enabled proxy instead of before.
But introducing the ADV_FLAG_PROXY_START flag seems meaningless.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Due to internal dependencies on other modules init priority
the 802.15.4 priority level must be increased. Former init
priority caused the module to be initialied before those
it depends on, so that lead to hard faults.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
option struct was uninitialized in insert_option() function
during encode_options() call when the while loop wasn't
executed before.
Signed-off-by: Jakub Witowski <jakub.witowski9302@gmail.com>
The hdr_len was uninitialized when none of if-else
conditions were met in decode_delta() function.
Signed-off-by: Jakub Witowski <jakub.witowski9302@gmail.com>
From the MQTT-SN spec:
6.5 Topic Name Registration Procedure
...
At any point in time a client may have only one
REGISTER message outstanding, i.e. it has to wait
for a REGACK message before it can register another
topic name.
...
6.9 Client’s Topic Subscribe/Un-subscribe Procedure
...
As for the REGISTER procedure, a client may have only
one SUBSCRIBE or one UNSUBCRIBE transaction open at a time.
...
Until now, the library did not comply with these requirements.
An additional "waiting" state for topics was introduced:
REGISTER, SUBSCRIBE and UNSUBSCRIBE as an extra step before
switching to REGISTERING, SUBSCRIBING and UNSUBSCRIBING. The
library now makes sure that only one topic can be REGISTERING
and only one topic can be in either SUBSCRIBING or UNSUBSCRIBING.
Additionally, requesting to UNSUBSCRIBE is now denied if the topic
is not yet SUBSCRIBED, to avoid weird race conditions.
Also, added two tests that verify this behavior.
This fixes#84644
Signed-off-by: Rene Beckmann <rene.bckmnn@gmail.com>
Add word 'by' to function names to clarify which is the thing that
is found and which is the thing that is searched for. For example,
mqtt_sn_topic_find_name was renamed to mqtt_sn_topic_find_by_name
because the function does not find the name but finds a topic by
its name.
Signed-off-by: Rene Beckmann <rene.bckmnn@gmail.com>
Currently the interrupt number of the ADC node is duplicated
with other node on several RA soc. This commit aim to
resolve this issue.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Implements the PBP commands of the BTP specs, in order to support
testing the PBP through autopts. This PR is in conjunction with the
following PR in AutoPTS: https://github.com/auto-pts/auto-pts/pull/1356
Signed-off-by: Frode van der Meeren <frode.vandermeeren@nordicsemi.no>
USB stack does not check api->lock() and api->unlock() return value and
all UDC drivers block without timeout in its lock() and unlock() api
implementations. There is no realistic way to handle lock() and unlock()
errors without making USB device stack API unnecessarily complex.
Remove the return type from lock() and unlock() to make it clear that
the functions must not fail.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Adds support for the SENSOR_ATTR_SLOPE_TH and SENSOR_ATTR_SLOPE_DUR
attributes These set the sensitivity for the SENSOR_TRIG_DELTA trigger
which uses the sensor's wakeup feature.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
When HTTP 101 Switching Protocols response is received, force the HTTP
parser to ignore any potential message body payload (which should
already belong to the new protocol).
This is usually not an issue, as Switching Protocols reply should
contain headers only, however it's been observed that some servers
specify chunked transfer-encoding header which tricks the parser
to wait for payload event though it never arrives.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With spinlock debugging enabled LLEXTs need additional symbols
exported by the kernel.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When building relocatable extensions, exported symbol names might end
up in a separate section (in my case ".rodata.str1.1") for which
storage address don't match section address. To access those names
addresses have to be relalculated.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
