Enable spi_flash sample for MAX32655FTHR and MAX32655EVKIT
which have an external Winbond W25Q128jv external flash.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Signed-off-by: Rob Cornall <Rob.Cornall@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
The code for checking for allocated BR/EDR PSMs was potentially resulting
in an integer overflow, due to doing a <= UINT16_MAX (0xffff) comparison
on a uint16_t variable. To avoid this, use a uint32_t variable internally.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Adds cyclic support, where a multi-block transfer is automatically
reloaded to the first block after the multi-block transfer completes.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Block_ts stores the number of transfers from DMA source, not the
transferred length in bytes.
Regression from 9c4cd3057d.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Building with clang warns:
subsys/net/lib/http/http_hpack.c:21:20: error: unused function
'http_hpack_key_is_dynamic' [-Werror,-Wunused-function]
static inline bool http_hpack_key_is_dynamic(uint32_t key)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/iis2iclx/iis2iclx.c:68:19: error: unused function
'iis2iclx_reboot' [-Werror,-Wunused-function]
static inline int iis2iclx_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm9ds0_mfd/lsm9ds0_mfd.c:42:19: error: unused
function 'lsm9ds0_mfd_accel_set_odr_raw' [-Werror,-Wunused-function]
static inline int lsm9ds0_mfd_accel_set_odr_raw(const struct device *dev,
^
lsm9ds0_mfd_accel_set_odr_raw is only used by code that was guarded by
defined(CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME) in addition to
!defined(LSM9DS0_MFD_ACCEL_DISABLED).
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso/lsm6dso.c:89:19: error: unused function
'lsm6dso_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso16is/lsm6dso16is.c:83:19: error: unused
function 'lsm6dso16is_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso16is_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/flash/spi_nor.c:306:20: error: unused function
'delay_until_exit_dpd_ok' [-Werror,-Wunused-function]
static inline void delay_until_exit_dpd_ok(const struct device *const dev)
^
delay_until_exit_dpd_ok is only used when ANY_INST_HAS_DPD is defined.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Rename the following properties in bindings and DTS:
-- freqs_mhz => freqs-mhz
-- cg_reg => cg-reg
-- pll_ctrl_reg => pll-ctrl-reg
Signed-off-by: James Roy <rruuaanng@outlook.com>
Remove the configuration for the new USB device stack, as there is now a
separate sample that demonstrates how to use it with Kconfig option
CONFIG_CDC_ACM_SERIAL_INITIALIZE_AT_BOOT.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add sample to shows how to use the CDC ACM UART provided by the new
experimental USB device stack as a serial backend for the console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There are some boards and samples in the tree that use the CDC ACM UART
as the default serial backend, just like a real UART controller would.
The new device stack requires more detailed configuration than the old
one. In order to use the CDC ACM UART as the serial backend with the new
device stack in the same way as with the legacy stack, we need to
provide a solution to initialise and enable the CDC ACM UART at boot
time. We cannot use snippets as they do not support Kconfig files or
source code. Shields would be an option, but they cannot be used for
virtual devices such as the CDC ACM UART. The remaining solution is to
put the code and Kconfig file for it in the subsys directory.
Allow CDC ACM UART instance and USB device stack to be initialized and
enabled at boot time and to use it as serial backend for logging or
shell.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fix "warning: 'cdc_acm_send_notification' defined but not used"
when Kconfig option UART_USE_RUNTIME_CONFIGURE is not used and
properly handle enqueue error.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The i.MX 91 Evaluation Kit (MCIMX91-EVK board) is a platform designed
to display the most commonly used features of the i.MX 91 applications
processor. The MCIMX91-EVK board is an entry-level development board
with a small and low-cost package.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The i.MX 91 SoC’s integrated EdgeLock® Secure Enclave provides
security features including lifecycle management, tamper detection,
secure boot and a simplified path to certifications. The i.MX 91
family features an Arm® Cortex®-A55 running at up to 1.4GHz,
support for modern LPDDR4 memory to enable platform longevity,
dual Gigabit Ethernet and dual USB ports, along with a rich set
of peripherals targeting medical, industrial and consumer IoT
market segments.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
This driver allow to use Zephyr native IP stack or the IP stack provided
by HAL / WiseConnect.
The WiseConnect implementation may take advantage of the specific
features provided by the 917 (power consumption, speed,
validation...).
Some notable features are not available with this interface:
- It seems Zephyr does not provide API to offload multicast membership
management. User should be to directly call WiseConnect APIs
- Support for ICMP frames is difficult. Note that WiseConnect
automatically answer to ping request. It is just not possible to
send ping requests and receive ping responses.
- Zephyr and WiseConnect both support TLS offloading. However this
patch does not implement it.
- Reentrancy in the WiseConnect side is uncertain.
This implementation has been tested with samples/net/wifi/ (which relies
on subsys/net/lib/shell).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Driver was tested with a custom application which enabled the BT_SHELL.
Basic functionalities were verified:
- Scanning
- Advertising
- Connecting
Configuration needed for the test:
- CONFIG_BT=y
- CONFIG_BT_PERIPHERAL=y
- CONFIG_BT_CENTRAL=y
- CONFIG_BT_SHELL=y
- CONFIG_SHELL=y
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
A specific section of the flash on the SiWx917 is reserved for the
Network co-processor (NWP). This zone needs to be delimited in order to
not overwrite it. We then need to use "code-partition" to provide Zephyr
the application code flash location.
Co-authored-by: Martin Hoff <martin.hoff@silabs.com>
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
