The schema for build info already contained a `board:path` sequence tag
definition, but boards.cmake did not populate this in the generated
build_info.yml.
Fix this by correctly populating the `board:path` with list of board
directories.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When we receive a response from a server we do not have an
outstanding request with, we disconnect the connection
rather than just ignoring it.
The reason for this is that the remote server is
not ensuring correct ATT flow control, which means
that we cannot trust future responses from the
server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The offset value in the PSA ITS non-volatile space is dedicated to
OpenThread key reference IDs. This offset must not overwrite any
other ranges already in use within the PSA ITS non-volatile space.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
"ca.der" contains an RSA key, but this file is now useless for this sample
as the sample is using EC keys. It's likely a leftover from some initial
development, so it can be removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a section with a practical example on how to build the sample in
order to test it with:
- real device
- ethernet over USB
and test it with a Linux host system.
Fix also references to overlay files that must be enabled to build the
HTTPS version.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit also moves the TLS (overlay) configuration to a separate file
named "overlay-tls.conf". In this way the simple HTTP (without TLS) will
not enable Mbed TLS.
A new test case is added to sample.yaml to test HTTPS scenario.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
psa_crypto_init was bounded to CONFIG_BT_HOST_CRYPTO_PRNG and
used to be called under prng_init. Updating the ifdef condition
and appropriating the function name for crypto init.
Also it is better to make sure psa_crypto_init called by host.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
This fixes out of scope IRQ lock key by using SEGGER_RTT_Write
version that locks the IRQ by itself.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The macros placing the DMA memory buffer in the appropriate
section in RAM was malformed. This PR fixes it.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Many drivers use a wrong __ASSERT in the fetch API, where they just
use SENSOR_CHAN_ALL, while it is more common fetching the specific
sensor channel (i.e. SENSOR_CHAN_PRESS, SENSOR_CHAN_ACCEL_XYZ, ...).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Print interface status information for "net iface" command.
This is useful information when debugging connectivity issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The Openthread communication with RCP via UART (with HDLC protocol) is
performed with serial driver using interrupts. As it was tested with
echo_client sample program, the
CONFIG_SHELL_BACKEND_SERIAL_API_INTERRUPT_DRIVEN is defined by default for
it. This config selects aforementioned UART_INTERRUPT_DRIVEN.
Problem starts when somebody wants to integrated the driver as a standalone
one (without echo_client) as a part of user application.
In this situation the UART_INTERRUPT_DRIVEN is not defined by default and
there is no serial communication between RCP and HOST devices.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The Atmel sam4l have generic clock 5 enabled at 1024Hz. Update sam4l
sam_tc_input_freq_table index 0 to reflect right value.
signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Enable sam4l internal factory calibrated RC32K clock source. The RC32K
was used as source for Generic Clock 5 using 32 as divider. The output
is a 1024 Hz clock that can be used by GLOC and TC0 peripherals.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Include explicitly `logging/log_backend.h` header so that non POSIX
boards can build this test. For POSIX boards, this headers was indirectly
included through `ztest.h`->`ztest_assert.h`->`tc_util.h`->`log_ctrl.h`.
Fixes#85441
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update the nrf70 Wi-Fi driver to use the mode specific
APIs (as a precursor to enable combining modes as required).
Signed-off-by: Sachin D Kulkarni <Sachin.Kulkarni@nordicsemi.no>
Snippet that helps to build USB device samples with virtual device and
host controllers and USBIP support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The server uses host support to export a USB device to a remote
USBIP client. It supports control and bulk transfers, interrupt
transfers may also work, but this depends on the host controller used.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow dynamic allocation of USB devices on connected event.
Add very basic USB device validation and configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Handle them in separate contexts so that the request completion callback
cannot be blocked, such as when a device connection is detected and
requires configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The transfers require enpoint MPS for proper transaction handling,
assign it in the common place during transfer allsocation so that it can
be reused.
Some users, such as USBIP, may need to keep a reference to private data,
add a parameter for completion callback data.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add an opaque pointer to store upper layer private data and initialize
it with the USB host context during controller initialization. Use the
pointer in event processing to get the correct context.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add interrupt and start frame parameters and schedule transaction at
specific frame. Implement for virtual driver only.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Address parameter/argument is no longer needed because we have a pointer
to the USB device. The Attrib parameter has never been used and will be
replaced by the interval and start-frame parameters in the future.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This will allow the controller driver to access information about the
device in the future.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the current implementation, NACK claims all resources and prevents
scheduling multiple transfers within a frame. Place a number of
available transfers in a list at the beginning of a frame, and process
the transfers in a limited number of slots.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Implement the dequeue function and remove the timeout parameter as it is
no longer necessary and can be handled in the upper layer. The dequeue
function is required for the USBIP implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not necessarily call k_timer_init() in the uhc_bus_resume()
implementation. Restart SOF timer after bus reset and in
uhc_sof_enable() implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add WPA2-PSK-SHA256 security type support for embedded supplicant.
Convert wifi key_mgmt to zephyr security type.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
Add the check if dev is NULL (when iface is NULL, dev is NULL) when
setting Wi-Fi CMD, in case Wi-Fi driver init fails and shell crashes.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Setting Wi-Fi cmd only when the net interface is up, avoid the case
that driver deinit and net interface is down, then the L2 APIs interact
with supplicant and driver, which may lead to CPU exception.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Validate that the connection timeout code path works as expected when
the command buffer pool is under stress.
Signed-off-by: Jordan Yates <jordan@embeint.com>
