Allow specifying the Kconfig file path in the environment (in practice
in the `conf.py` file), to allow the script to correctly find Kconfig
roots that aren't in the expected `"modules" / name / "Kconfig"`
location.
This is required since in the normal build system, the
`ZEPHYR_{name_var}_KCONFIG` cmake symbol can be constructed arbitrarily
in `modules.cmake`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This shield is compatible with all XIAO boards. Tested with 2 of them:
* xiao_ble
* xiao_esp32s3
Extend sample.yaml for integration testing with both, so there is coverage
across two very distinct SoC vendors and architectures.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move 'tags' and 'modules' into common section in samples.yaml, so test
definitions are deduplicated a bit.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
When tested with xiao_esp32s3 + seeed_xiao_round_display main stack is
occupied with 3504 bytes (checked with 'kernel thread stacks' command).
Increase main stack size from 2k to 4k in order to make this sample work at
runtime.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Mark interfaces on XIAO header that are supported by each board. This
allows to filter by them (with depends_on) when running twister.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Change adds bsim tests with CONFIG_BT_LONG_WQ=n to ensure correct
behavior. Change uses host/gatt/ccc_store test.
Change also switches to using more unique simulation ID in the test
scripts.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change adds bsim tests with CONFIG_BT_LONG_WQ=n to ensure correct
behavior. Change uses host/security/ccc_update test.
Change also switches to using more unique simulation ID in the test
scripts.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change allows performing ECDH operations through system workq. This is
done to allow reducing memory consumption by disabling the long workq on
small SoCs.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Update to support APP_CPU flash access.
- fix the map_rom_segment so it can be used in other context
- add IROM and DROM region size in Kconfig
- update the memory.h by using dts records
- fix the appcpu ld file to support flash
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Update and enable Wi-Fi/Bluetooth software coexistence management.
This improves package handling and is recommended to be used
in high traffic scenarios.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
I don't have time to review the LED area in Zephyr,
so I step aside to make room for someone else.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Implement support for DNS Recursive Name option and use obtained
information to configure DNS resolver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case interface is UP, the interface is added to WPA supplicant in the
iface_wq itself and the max stack size is 4264, so, increase the stack
size of the iface_wq.
If the interface is added via net_mgmt thread then it works fine.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fix compilation issues for SoftAP mode which were missed in the mode
specific code changes.
Signed-off-by: Sachin D Kulkarni <Sachin.Kulkarni@nordicsemi.no>
This commit adds initial support for the Adafruit MacroPad RP2040.
The board is based on the Raspberry Pi RP2040 microcontroller and
includes a 3x4 mechanical keyboard, 12 RGB NeoPixels, a rotary encoder
with push button, a 128x64 OLED display, and a small speaker for audio
feedback.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Make use of pm_device_driver_init to perform driver initialization.
Implement PM suspend and resume, which performs the following actions:
* Enables/disables the USART
* Gates the USART clock
* Configures USART pins
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Reuse the same peripheral init function between init and the
runtime configure API. Remove redundant enable calls, the init
function enables the USART internally.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Increase CONFIG_BT_BUF_CMD_TX_COUNT to avoid deadlock when running out
of buffers. See #77241 for the reference.
This fixes Mesh Provisioning Service tests (MESH/NODE/MPS).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds HWINFO driver for MAX32 MCUs.
"z_impl_hwinfo_get_device_id" function is necessary for Zephyr USB
device stack.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Different test layers need different stack sizes for BTP CMD thread
and also AutoPTS might need to overwrite this config based on test
case.
Increase the stack size for mesh tests.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
There's nothing in RFC 2131 or RFC 8415 that would mandate the DHCP
server to reply with a source port set to the IANA assigned one, and
some servers seem to send responses with some arbitrary source port set.
Therefore, make Zephyr's DHCP client implementation more permissive,
accepting packets with a source port set to a different port than the
IANA assigned server port.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implementation of chan_filter and chan_release allows to maintain
synchronization about DMA channel allocation between hal DMA driver and
zephyr DMA driver.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Update Cmake to include hal EMDRV header
It also adds dmadrv source when CONFIG_SOC_GECKO_LDMA is selected
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
