Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
By default, TFM enables hardware rollback protection, which requires a
security counter to be embedded in the image trailer. The default
behaviour of constructing this counter from the image version breaks the
TFM `boot_nv_security_counter_update` implementation once the version
number is greater than `0.0.1024`. As such, explicitly specify the
desired security counter value. As per the MCUboot docs, this does not
need to be incremented on every firmware update.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add support in this IPC backends for POSIX arch targets in general,
and ensure the nrf5340bsim defines the buffer which will be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new function for initializing the Rx side,
so users do not need to initialize the pointers by hand
if they did not use PBUF_DEFINE().
Let's also rename pbuf_init() to pbuf_tx_init() to clearly
signify the previous function was only meant to be used
by the Tx side.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a function which can be used to remap embedded device address,
into addresses which can be used in the simulated native boards.
For the nrf_bsim boards we provide an actual implementation.
For other boards, we provide an optional dummy version which does
nothing.
It is up to each board implementation to decide if they want to
provide one or use the dummy.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the HW models module to:
85944c64f224406e4d781aa382c5f1f71ed307fd
Including the following:
* 5340: Allocate a buffer for the APP core RAM (2nd version)
* 82ca90c Add NCS test-spec.yml to trigger downstream CI job
* a05d7a6 docs: top README: Mention nrf54l15 support and minor fixes
* cd64524 54 ECB/CCM tests: Remove comment which does not apply
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ssize_t is not part of the C library ISO standard subset, and as such
one cannot expect a C library to expose the type by default.
Some libraries like glibc do not expose this type in general, and
trying to build using them results in build errors.
There is 3 possible options:
1. Continue using ssize_t and:
1.a define _POSIX_C_SOURCE before including any header
1.b include sys/types.h directly (A bit uglier)
3. Not use ssize_t, and instead rely on ISO standard types
Let's just go with 1.a assuming we want to keep using this type,
as that is the correct way of getting this type defined.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
struct i3c_ccc_address is intended to match the output where the address
is left shifted by 1 for SETDASA and SETNEWDA. Require the operations
calling it to shift the data.
add an additional parameter for the setdasa function which will allow for
the da to be configured rather than being hard coded.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Extend the safety overview with information about the IEC 61508 standard
and why it was chosen for zephyr.
Add a new diagram which shows relations between the IEC 61508
and other standards.
Signed-off-by: Simon Hein <Shein@baumer.com>
Use the quirk to keep only the necessary clocks running when the core is
hibernated. The quirk is necessary to bring the USB suspend current
below the USB 2.0 suspend current limit.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Make it possible to have vendor quirks after hibernation entry sequence
and before hibernation exit sequence.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Initialize PHY as part of controller init sequence.
Disable 2M and coded PHYs for now, as they cause issues on devices
that don't support them. This should be made configurable in the future.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Update HAL for Series 2 devices to Simplicity SDK 2024.6.
This HAL deprecates sl_device_init_emu(). Equivalent functions
are now performed by sl_power_manager_init().
For now, soc.c remains compatible with both the Gecko SDK based
HAL for Series 0 and 1, and the Simplicity SDK based HAL for
Series 2. In a future commit, soc.c will be split between the
two platforms.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Fix the chip select when using the synchronous API with DMA path.
Note need to use TxDataRequest flag instead of ModuleBusy flag now
because module busy flag will not deassert until PCS deasserts.
This does not fix CS for the non-DMA path, because that would require a
large driver rework.
Do not skip configuration when calling transceive with the same spi_cfg
because we need to write a new command word.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fixes 78713
Add instructions to the "Git Setup" section to ensure that the user's
GitHub profile name is their full name (first and last) and that the
GitHub profile name and email address match the git config user.name
and user.email.
Page: contribute/guidelines
Tested with:
ninja html
python3 -m http.server 8000
Signed-off-by: Arrel Neumiller <rlneumiller@gmail.com>
The IPv6 branch of net_tcp_endpoint_copy() was accidentally made
conditional on CONFIG_NET_IPV4 rather than CONFIG_NET_IPV6.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Update the GPIO driver to use PDL API instead of HAL API to fix the
issue with configuring interrupts on both edges
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
- Added `cs-supported` property to nrf-radio devicetree
- Added `HAS_HW_NRF_RADIO_CS` Kconfig option which is set if
`cs-supported` property is enabled
- Enabled `cs-supported` property for nrf54-series devices
- Disabled `cs-supported` on nrf54l15bsim because it is not
yet supported
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
The CSIP spec states that the procedures shall only be done
on bonded devices, so a check for that was added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add note that those Kconfig options were removed from Nordic UART driver
configuration.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove Kconfig option that no longer has any use after pinctrl
driver is introduced.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This is a leftover from pre-pinctrl era and no longer makes sense.
Driver always manages gpio through pinctrl.
Support removed from uart and uarte shims.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The suspended flag is checked during SOF and RESUME interrupts, and it
is modified within a delayable work item. To prevent race conditions,
this update ensures that interrupts are disabled (locking IRQs) before
modifying the suspended flag. Additionally, the RESUME interrupt is
enabled only when the USB is suspended.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Evaluate CONFIG_LINKER_ITERABLE_SUBALIGN in CMake instead of in the
linker script.
It cannot be assumed that a linker generator implementation is
pre-processed and therefore Kconfig settings cannot be used in those
but must be evaluated in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Constrained application can require to avoid waiting for response
from a server. CoAP No-response option defined in RFC 7967 allows
to do that by suppressing selected response types.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
If DNS statistics is enabled in Kconfig, then start to collect it.
This is useful in order to see how many DNS requests/responses
received or sent, and also see the amount of dropped DNS packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing documentation for macro parameters, as `@param ...` is
only expected to be used with a variable argument list.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The `@kconfig{}` pattern does not work properly as the first value in
the `@retval` field, leading to:
```
WARNING: zephyr/include/zephyr/llext/llext.h:296: unexpected token in
comment block while parsing the argument of command retval
```
Signed-off-by: Jordan Yates <jordan@embeint.com>
Pull the output build folder from the environment, instead of hardcoding
the HTML output folder, which is wrong for the latex build.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Current folder name is set to "espressif_esp32" and
might not reflect all kinds of SoCs as such as esp8684.
Rename the folder to "espressif" only.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Separate the pickled EDT generation from the C-Macro header
generation in gen_defines.py to have a more clear responsibility
of the scripts in the DTS parsing process.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Introduces type hints to all functions for improved static type checking
and IDE support.
Also equalizes spacing between functions as the lines are being touched
anyway.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
According to USB 2.0 Specification the remote wakeup device must hold
the resume signaling for at least 1 ms but for no more than 15 ms. The
DWC2 otg controller requires the software to drive the remote wakeup
signalling for appropriate duration (when LPM is disabled, which is
currently always the case in udc_dwc2). Arbitrarily choose to drive the
resume signalling for 2 ms to have sufficient margin in both directions.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
