The PMU is not reset by core reset and therefore it is necessary to exit
hibernation on DWC2 disable to prevent endless PMU interrupt loop when
the driver is enabled again.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Enter hibernation in thread context with the lock held to make sure to
not queue any transfers when the core is hibernated.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
UDC API handlers and DWC2 driver thread share not only software
constructs, but also the underlying hardware. Ensure that any UDC API
call is not preempted by DWC2 driver thread (and vice versa) by
acquiring the lock in thread handler.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When the queue is full, all messages posted inside interrupt handlers
are simply dropped. This problem can be remedied by having the message
queue large enough, but determining the maximum number of messages that
can ever be posted in the system is really complex task.
Hopefully in DWC2 driver there is finite number of events that have to
be processed inside thread handler. Therefore it is unnecessary to
determine the maximum queue size for the events if the events are posted
to k_event object instead of send to k_msgq object.
Use combination of three k_event structures to handle all possible event
sources. This not only guarantees by design that no event will be lost,
but also slightly reduces the memory usage.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add the necessary entries but keep the usbhs disabled by default on
radio core (it is enabled by default on app core).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This commit adds support to dictionary logging to parse binary
data directly from input serial and generate the ascii logs.
Signed-off-by: Kumar Siddaramayya <harish.kumar@nordicsemi.no>
For nrf54h20 a range of combinations exist to configure the test and
debug domains data sources and sinks. Expose them in DTS to allow
configuring them. Also drop the previous style which was too rigid to
extend to cover all cases cleanly. The old style was only used in a
single sample application so far.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
This fixes the following warning:
> unit address and first address in 'reg' (0x80280000) don't match for
> /soc/sckcr@81280004
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x82000) don't match for
> /soc/flash-controller@38000000/flash@16000000/partitions/partition@80000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x82000) don't match for
> /soc/flash-controller@38000000/flash@16000000/partitions/partition@80000
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add a new test to the simple llext test suite that verifies that DT
devices are properly exported to extensions. This is done by obtaining a
device handle from the DT and then trying to get the same handle at
runtime using the device_get_binding() API.
This test is optional because the current qemu_xtensa platform does not
have any usable DT devices to test with.
The LLEXT heap size is also increased to 64 kbytes to avoid heap
exhaustion when running the new test on mps2_an385.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This change adds a new configuration option, LLEXT_EXPORT_DEVICES, which
enables exporting all devices defined in the device tree to llext
extensions. When enabled, all devices are made available to extensions
via the standard DT_ / DEVICE_* macros.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch adds an indirection level moving the current code from inside
the EXPORT_SYMBOL and LL_EXTENSION_SYMBOL macros to private Z_* macros.
This is done to allow for the official APIs to properly expand more
complex arguments, such as the DT function-like macros.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The comment for Z_DEVICE_DT_DEV_ID() is misleading: device_get_binding()
compares its inputs with values generated by the DEVICE_DT_NAME() macro,
which expands to the node's DT label or to the node's full name.
This patch updates the comment to reflect the actual behavior of
Z_DEVICE_DT_DEV_ID().
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The error message for Z_DEVICE_NAME_CHECK was needlessly calling
DEVICE_NAME_GET() on the "name" string, resulting in a confusing message
being displayed.
Remove the DEVICE_NAME_GET call so that the error message shown by the
compiler contains the actual name.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
These test features are not required and are not used in any USB samples
or tests.
Follow-up on commit 0809b75b42 ("boards: remove test feature usb_cdc")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This change adds bt_le_cs prefix to public CS API as well as
adding le_cs prefix to CS related bt_conn callbacks. This is
to ensure consistency within CS API while maintaining the
separation between the Bluetooth LE and Classic features.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Adds following HCI support for CS configuration:
- LE CS Create Config command
- LE CS Remove Config command
- LE CS Config Complete event
Two callbacks have been added to notify the application
when a new CS configuration is created or an existing
CS configuration is removed.
Signed-off-by: Burak Gorduk <burak.gorduk@nordicsemi.no>
Added a timeout for active scans (instead of using the host's scan
timeout) in the shell by submitting a k_work that stops the scan
after a specified period.
Fixes#78659
Signed-off-by: Babak Arisian <bbaa@demant.com>
Since the same test might be run in parallel on different platforms,
the one that it's started later will fail due to port re-use for
the OpenSSL server.
Since it's not really required to run the tests on native_sim and
native_sim/native/64, the latter is removed in order to solve this
problem.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
He will be taking over my duties.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This is my final week at Nordic. My future job will not involve me
maintaining the Bluetooth host.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Added kruithofa as a collaborator as they are familiar
with ISO and we should have at least 2 collaborators
to perform reviews.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add jlink as possible runner for cyw920829m2evk_02 platform in
board.cmake file
Signed-off-by: McAtee Maxwell (CSS ICW SW MTO INT 2) <maxwell.mcatee@infineon.com>
Change the interrupt number of flash in device tree due to duplication
And disable CONFIG_FLASH as default
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Channel sounding frequently produces very large events, so the default
of 68 bytes can lead to buffer overruns / memory corruption.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
The code path for error handling and timestamping in tx path
was meant to be identical in function to old eth_mcux driver,
but there is actually a discrepancy causing no error handling
for timestamped frames, fix it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove unnecessary Kconfig.sysbuild for mimxrt1170_evk
as MCUBOOT_MODE_SWAP_WITHOUT_SCRATCH is set by default without it.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
So let's make sure we test in native_sim instead of native_posix..
Also, building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
