Before picolibc version 1.8.5, the only version of printf available with
long long output support was the version including full support for
floating point numbers and positional parameters. That version uses more
stack space than the limited version causing an overflow.
Increase the ztest stack space by 128 bytes.
Signed-off-by: Keith Packard <keithp@keithp.com>
On some SMP platforms (such as intel_adsp_ace15_mtpm) it is not
safe to access the stack of a thread that is currently executing
on another CPU. This requires that tests be written such that
objects and data that are shared between threads that may execute
concurrently on different CPUs be placed into memory that is not
a thread's stack.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Added an overlay file for mimxrt1170_evk_cm33 to test rtio
with the spi_loopback test.
Added mimxrt1170_evk_cm7 to the testcase.yml file
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
in ip_k66f platfrom, we using rtt as debug port,
which is conflicted with usermode. see below:
warning: LOG_PRINTK
(defined at subsys/logging/Kconfig.processing:8)
has direct dependencies !USERSPACE && !LOG_MODE_MINIMAL
&& LOG with value n, but is currently being y-selected
by the following symbols:
- LOG_BACKEND_RTT_FORCE_PRINTK
(defined at subsys/logging/backends/Kconfig.rtt:103),
with value y, direct dependencies LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y),
and select condition LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y)
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Changes the FS26 watchdog init priority to avoid boot-looping.
Requires SPI priority to be changed as well.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
The option is long gone, PR was sitting for a long time so this got
merged and now it's failing compliance check.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This testsuite exercises a number of things. Namely
* `mutable` devices (i.e. those backed in SRAM)
* `uart_emul` support for interrupt mode (receive only)
* `devmux` capabilities of multiplexing several uarts
* switching the system console between several uart backends
Testing Done:
```
west build -p auto -b qemu_riscv64 -t run \
tests/drivers/console_switching/
...
*** Booting Zephyr OS build zephyr-v3.4.0-3988-gaaefb2d764ea ***
Running TESTSUITE console_switching
================================================================
START - test_read
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
PASS - test_read in 0.005 seconds
================================================================
START - test_write
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
PASS - test_write in 0.003 seconds
================================================================
TESTSUITE console_switching succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [console_switching]: pass = 2, fail = 0,...
- PASS - [console_switching.test_read] duration = 0.005 seconds
- PASS - [console_switching.test_write] duration = 0.003 seconds
------ TESTSUITE SUMMARY END ------
===============================================================
PROJECT EXECUTION SUCCESSFUL
```
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The Device Multiplexer (devmux) is a pseudo-device that can
be used to select between multiple included sub-devices.
It is experimental, but its current use is in system
remediation. Take for example, the scenario where the
system console and log subsystem both have the uart backend
enabled. The case may arise, where the chosen backing uart
could be an abstraction of another very high-bandwidth bus
- such as a PCIe BAR, a UDP socket, or even even just memory.
If the "service" (for lack of a better term) that backs this
abstract "uart" experiences an error, it is of critical
importance to be able to switch the system console, uart log
backend, or whatever to another uart (semi-transparently) in
order to bring up a shell, continue to view system logs, or
even just support user console I/O.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add support for mutable devices. Mutable devices are those which
can be modified after declaration, in-place, in kernel mode.
In order for a device to be mutable, the following must be true
* `CONFIG_DEVICE_MUTABLE` must be y-selected
* the Devicetree bindings for the device must include
`mutable.yaml`
* the Devicetree node must include the `zephyr,mutable` property
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add tests for the newly added
STRUCT_SECTION_ITERABLE_NAMED_ALTERNATE(). This type of
section should be iterated with
STRUCT_SECTION_FOREACH_ALTERNATE().
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix l2cap error handling generally not properly disposing of tx buffers for
enhanced channels; Any callbacks have to be called and the
l2cap_tx_meta_data has to be freed
Signed-off-by: Troels Nilsson <trnn@demant.com>
In an earlier commit, the riscv-privileged level implementation of
`arch_cpu_idle()` is not included unless `CONFIG_RISCV_HAS_CPU_IDLE` is
enabled.
This commit ensures the option is enabled on all the existing CPUs, thereby
maintaining the existing behavior.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
The current configuration comes with a common implementation of
`arch_cpu_idle()` for the whole riscv-privileged family, utilizing the
`WFI` instruction to place the CPU into a light sleep state, with the
assumption that it will be awakened later by interrupts such as SYSTICK.
However, this approach is not always effective, particularly in scenarios
where the SYSTICK is not a valid wake source.
This commit uses `CONFIG_RISCV_HAS_CPU_IDLE` as the build condition of the
family-level `idle.c`, allowing CPUs that do not enable this option to
fallback to a generic arch-level implementation in
`arch/riscv/core/cpu_idle.c`.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The ATSAMD20E16 used in this board only has 8KiB SRAM, so the defaults
are not really suitable for anything close to useful, particularly the
sink sample that most closely resembles the original demo for the board.
This should also allow more tests not to be skipped for this board as
otherwise they overflow RAM usage.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Adds the tja1103 enet phy for setting phy options on the mr_canhubk3.
Co-authored-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
MDIO controller is part of GMAC and it requires GMAC ethernet driver to
initialize first because it will reset the whole GMAC hw block during
initialization. Both C22 and C45 APIs are supported.
Co-authored-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
atomic_*_bit functions work with atomic_t arg as with array, therefore
the atomic variable should be declared using ATOMIC_DEFINE.
Coverity-CID: 333358
Fixes#65588
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Useful option during development and when applying smaller change to the
code and verifying changes using tests. This works fine as long as no
dependencies or major changes are done, i.e. when editing few files and
in a subsystem. Use with caution and use on your own risk :-)
When building multiple tests, this provide significant boost, up to 300%
faster than when rebuilding everything from scratch or when re-running
cmake every single time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the posix common test so that it will pass on Xtensa SMP
boards such as intel_adsp_ace15_mtpm. This involves ensuring that
a newly created thread does not attempt access/modify the stack of
a thread that is currently running on a different CPU.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Initialize the variable to zero. I don't think there is any way
out of this function without it being initialized, so IMHO it's
a false positive.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
add dts support for watchdog to accomodate watchdog driver bringup on
aglex and agilex5
Signed-off-by: Balsundar Ponnusamy <balsundar.ponnusamy@intel.com>
specific to platform, watchdog reset line can be connected either to
CPU, SOC or none of the entity. These resets cannot be configured from the
application. So added a warning message when application configures this
option
Signed-off-by: Balsundar Ponnusamy <balsundar.ponnusamy@intel.com>
added support for watchdog enable/disable at boot
Pausing watchdog timer when CPU is halted by the debugger and
pausing watchdog timer when CPU is in sleep state is not
configurable through application, so added warning log with return success
Signed-off-by: Balsundar Ponnusamy <balsundar.ponnusamy@intel.com>
clearing interrupt flag will not assert the system reset as per IP spec,
so interrupt flag should not be cleared in isr
use #if macro check directly with DT_ANY_INST_HAS_PROP_STATUS_OKAY for
interrupt
Signed-off-by: Balsundar Ponnusamy <balsundar.ponnusamy@intel.com>
mmu enabled platform needs mapping of physical address ranges to
the virtual address at runtime. So using DEVICE_MMIO_* helper macros to
map physical csr address space to RAM runtime if MMU is enabled
Signed-off-by: Balsundar Ponnusamy <balsundar.ponnusamy@intel.com>
Reset cause reason was not initalized properly, making
hwinfo feature not to work as expected.
Fixes#65634
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This option let specify at startup the zoom factor to apply on the
SDL window. See CONFIG_SDL_DISPLAY_ZOOM_PCT.
Signed-off-by: Arnaud MAZIN <arnaud.mazin@gmail.com>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
