Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The Transfer Complete flag (TC) is used to check if a transfer is
complete. This mechanism is used before suspending the UART module to
make sure that all data are sent before the suspend procedure.
The UART ISR clears this flag after completion of a async transfer which
causes a hang during UART device suspend setup.
There is just no need to clear this flag in ISR, it is cleared every
time we start a new async transfer.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
One can not even replace sucessfully pytest basic sample `pytest-args`
with command line "--pytest-args", as all it does is to append a single
string to current list of commands, making it impossible to send several
arguments.
This patch fixes that by allowing several instances of `--pytest-args`
to compose the whole list of arguments to be passed to pytest.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
If a platform is fitlered, do not add it to keyed test map, otherwise we
will end up skipping all platforms from the same class without any
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add boot_partition and slot1_partition for
mimxrt1010_evk and mimxrt1015_evk.
Enable MCUBoot & Flash support for them.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
In case of boards where REF_CLK signal is not connected
to the GPIO0 by default add the possibility to use
the optional GPIO16/GPIO17 as a REF CLK source.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
slab_buff size is calculated based on size of osdp_ephemeral_data union
so it is safer to use same structure for slab init.
Changes in osdp_event or osd_cmd structures can cause crashes without this.
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
Simplify and clarify spi_stm32_shift_m by splitting it in
3 smaller functions with clear names.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
In H7, TXP indicates when its FIFO has room for, at least, one
packet. Thus, rename ll_func_tx_is_empty as ll_func_tx_is_not_full,
to be consistent in all platforms.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Avoind calling startMasterTransfer multiple times in a
transaction by moving it to the transceive() function.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
the FIFO Rx need to have a Minimum memory to works
distributed the rest of the ram_size memory between
the different TX FIFOs except the first which is
a control endtype with max data payload of 64 bytes
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Rename the experimental driver overlay to be the same
for all the platforms, and document about it in the boards'
index.rst.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add tests for line splitting in console echo and console_getline()
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Receiving uart messages like: "\r*\n*\n" ('*' is a wildcard here) resulted
in invalid echo and invalid console_getline() output.
For example after receiving "\rabc\nd\n" uart_console_isr() echoes
"\r\nabcd\r\n" (note that "\r\n" before 'd' is missing) and after calling
console_getline() twice we received "" and "abcd".
uart_console_isr() changes single occurences of '\n' and '\r' to "\r\n" and
to avoid outputting "\r\n\r\n" after receiving "\r\n" it keeps track of the
last character. But it was tracking only the control characters not all
characters so in case of inputs like "\r*\n" the '\n' was omitted because
the last tracked character was '\r'.
Its fixed by tracking last character no matter of its type
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Add test case to ensure that NET_EVENT_IF_HOSTNAME_CHANGED event is
triggered properly when the hostname changes.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The zbus_chan_read with K_NO_WAIT was generating a fail in the
qemu_riscv32_smp board. This fix replaces the K_NO_WAIT with a K_FOREVER
on the test, which would not affect the test execution for other
platforms/boards.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Add an option to call an application specific hook when setting the
column to scan. This makes it possible to handle application specific
quirks.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Although the RT1015 only supports 128 KB of FlexRAM being used at once, the
default fusemap overallocates 160KB of FlexRAM. The JLink flashloader
algorithm appears to rely on the 64KB of DTCM in the default fusemap
being configured. Reducing the DTCM allocation resulted in JLink
failing to flash the SOC.
To resolve this, utilize the default fusemap of {O, O, D, D, I} for the
RT1015 FlexRAM setup. Add a note about the restrictions on using
overallocated FlexRAM to the SOC DTSI.
Fixes#65889
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This will allow to init watchdog on HW's supporting different
number of cpus and watchdogs based on runtime arch_num_cpus
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
The init_entry struct got modified to add a union with a non const dev
pointer in afc59112a9. Some old compiler (such as GCC 4) seems to
require a pair of brackets to correctly initialize the field in the
union. Add those brackets to the initializers in device.h and init.h to
maintain compatibility.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add `possible` to match-leak-kinds to prevent false positives caused by
POSIX soc no cpu cleanup.
The leak can be reproduced by adding CONFIG_NETWORKING=y to
tests/lib/cpp/libcxx/prj.conf and run twister:
twister -p native_sim -s tests/lib/cpp/libcxx/cpp.libcxx.host
--enable-valgrind
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Printing fractionals currently put the sign on integer values on the
fractional part, for example:
longitude : -6.-207483333
Run an extra abs to get rid of the sign there for latitude, longitude
and altitude, compute the sign separately so it works for numbers
between -1 and 0 as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This allows external applications wishing to report coverage data over
different interfaces the ability to do so by exposing the gcov list.
Signed-off-by: Joshua Lilly <jgl@meta.com>
Update Zephyr fork of MCUboot to revision:
05d11942774fc15b90af101232ec5305051216ec
Brings following Zephyr relevant fixes:
- 215345f7 zephyr: Add firmware loader MCUboot operation style
- 433b8480 zephyr: Move IO functions out of main to separate
file
- 5e6cffbf boot: boot_serial: Fix single slot encrypted image
list
- 3f0b89d6 boot: zephyr: add support for mimxrt101x_evk
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
While enabling workaround for PAN 58 the PPI driver is used.
This requires the nrfx PPI driver to be enabled thus CONFIG_NRFX_PPI
Kconfig symbol needs to be set.
Jira: NRFX-1616
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
This check has to be done independent of whether RAM is used for buffers
or not and depends on device maximum length property.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of assuming only RAM is accessible by EasyDMA, use the generic
DMA accessible function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Some targets may not have `NRF_SPIM_HAS_32_MHZ_FREQ` or
`NRF_SPIM_HAS_16_MHZ_FREQ` symbols but have `NRF_SPIM_HAS_PRESCALER`
symbol defined. The symbol informs that target supports 32 MHz and
16 MHz frequencies for SPIM instances.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The CLOCK HAL header is only needed for nRF5340 SoC. It's used when
user wants to configure SPIM instance to 32 Mbps. The HAL checks
if is running at 128 MHz as only then 32 Mbps is supported.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
NSEC_PER_SEC is an unsigned literal which will promote variable increment
to unsigned for the comparison operation, thus returning -EINVAL for
negative increment values.
For positive increment, -NSEC_PER_SEC becomes a large unsigned value
which will also return -EINVAL.
Fix by casting NSEC_PER_SEC to an int.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
The zephyr bluetooth stack expects the controller to know its public
address, if any. At least for BlueNRG, the public address is forgotten with
every reset/power cycle, so there needs to be a way to set it from within
zephyr. This is accomplished using the `Aci_Hal_Write_Config_Data` HCI
command, as described in PM0237.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
