Fix the range check for col_size to allow a configuration with less than
16 columns. Not sure why the minimum was set so high but there's no
reason I can tell for it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove the deprecated macro PTHREAD_BARRIER_DEFINE().
This was deprecated prior to v3.4.0 and technically should have
been removed prior to v3.6.0.
Users should instead use the standard POSIX call,
pthread_barrier_init() to initialize a pthread_barrier_t.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
With the previous changes, usb_set_config() is no longer called by
default at boot time, causing the test to fail.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Part of the initialization is done in the static usb_device_init()
function called by SYS_INIT(). We can move part of it, which initialize
the descriptor and calls usb_set_config(), to usb_enable(). This allow
some usb_get_device_descriptor() dependencies called at application
desired point.
Also make sure that usb_fix_descriptor() is called only once.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Argument to FIELD_GET macro was mixed up resulting in
incorrect values being reported for voltage and current
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Replace SebastianBoe with Vge0rge as he is taking over my
responsibilities.
This affects misc. TF-M modules.
Vge0rge is the upstream TF-M maintainer for nordic.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a link to _POSIX_CLOCK_MONOTONIC, correct the
_POSIX_RAW_SOCKETS kconfig option.
Define _POSIX_CHOWN_RESTRICTED and _POSIX_NO_TRUNC so that they
conform to the spec.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Link the option _POSIX_REALTIME_SIGNALS to the option group
POSIX_REALTIME_SIGNALS since it is well-defined in the spec.
Add the definition to the option_groups page.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The code currently clamps timeout length so not to overflow the computed
cycle difference variable or the sys_clock_announce() argument's range.
But this completely fails to take into account the case where two
successive timeouts with enough time between them will still overflow the
cycle difference and/or the tick count.
Fix this by clamping the actual number of cycles to wait for based on
the previous report occurrence rather than clamping the timeout ticks.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In commit 6068255512 ("drivers/timer/arm_arch_timer: Fix cycles
overflow with GDB stub") an extra TO_CYCLE_DIFF() macro was introduced
to bypass the cycle_diff_t type cast in some cases.
The actual fix consists in defining that type properly in the first
place. That's the very reason why such type was abstracted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There are two issues being fixed here:
1) The code currently clamps timeout length so not to overflow the
computed cycle difference variable or the sys_clock_announce()
argument's range. But this completely fails to take into account
the case where two successive timeouts with enough time between them
will still overflow the cycle difference and/or the tick count.
2) If a timeout with K_TICKS_FOREVER is provided then the comparator is
set with UINT64_MAX which is bogus. Not only this value doesn't make
much sense in the context of a running cycle counter, but it also
opens the possibility for the same cycle diff and/or ticks overflow
as above.
Fix both of those by clamping the actual number of cycles to wait for
based on the previous report occurrence rather than clamping the timeout
ticks.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
External XTAL usage is missing a Bootstrap Cycle configuration
in Kconfig, causing build to failure when CONFIG_RTC_CLK_SRC_EXT_CRYS
is selected.
Fixes#72190
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
when run package from another PC, the openocd path
may not the same, so try to use ZEPHYR_BASE when
not aligned
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Added the Round Display for Xiao boards as a shield.
Added a xiao_adc node to Xiao board dtsi files.
Signed-off-by: Nicolas Goualard <nicolas.goualard@sfr.fr>
Change the GCC toolchain configuration to make use of the Cortex-R82
target. When Cortex-R82 was added as a GCC toolchain option, the GCC
version of the Zephyr SDK did not support Cortex-R82 tuning. Zephyr was
therefore compiled compiled for the Armv8.4-A architecture. Since Zephyr
SDK 0.15.0 (which updated GCC from 10.3.0 to 12.1.0) coupled with Zephyr
3.2, the Cortex-R82 target is supported.
The Armv8-R AArch64 architecture does not support the EL3 exception level.
EL3 support is therefore made conditional on Armv8-R vs Armv8-A.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
In 972a4d9f6f
the test was relaxed to allow a possible parallel thread
waking the CPU during the idle timeout checks.
How this was done though, a system timer driver
which wakes the kernel spuriously a bit before the
correct deadline would not be detected, even
though it should.
Let's fix this, ensuring the timer has been
called when we check the wake time in inside the
expected range.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These relocations are needed e.g. when an LLEXT is built from
multiple files and they share data objects.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Include `psa_crypto_ffdh.c` when compiling MbedTLS with PSA support, as
`MBEDTLS_PSA_BUILTIN_KEY_TYPE_DH_PUBLIC_KEY` references the included
functions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The namespace example seems to have a typo missing the CONFIG_
part of the kconfig argument in the mcuboot target, fix it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add missing break inside switch statement to allow UDC context to
indicate that current operating speed is High-Speed. Due to missing
break statement, the stack always assumed Full-Speed.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The b_u585i_iot02a platform already has an 'eeprom0' node in the default
devicetree. Delete the default node so that the overlay can define the
nodes needed for the test.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Currently wifi sample code contains a pair of .conf and .overlay
for every single esp32-based board. Files are usually identical.
This PR remove all esp32* board files and use common socs instead.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Two issues fixed:
When pull-context is created, it does not have to wake up the RD
client context. Ignore the EPERM warning.
When new pull-context creates a new socket, sometimes socket-loop
gets to recvfrom() before we have set O_NONBLOCK on the socket.
So use ZSOCK_MSG_DONTWAIT on zsock_recvfrom() so it does not
block the socket loop.
Fixes#71450
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Adds test for timeout script chat command, which is a script
chat command where only the timeout parameter is set. The
script will simply wait for the timeout duration, then move
on to the next script chat.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Modem chat scripts should be able to add a script command which
is simply a delay. The validation of chat scripts currently
disallows chat script commands which only have a timeout set.
Update modem_chat to allow modem chat script commands which
only have a timeout. Additionally do a bit of cleanup to
remove duplicate code.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
net_buf_alloc(K_FOREVER) can now fail (if run from the syswq). Propagate to
the caller instead of asserting.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
It may happen that the interface is up but not yet running
when we issue the rejoin_ipv6_mcast_groups(). This can be
fixed by calling this function again right after the iface
is set to 'running' state in the notify_iface_up handler.
Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no>
Since the RW612 BGA board's FlexSPI configuration prevents the board
from executing from flash while the PSRAM is configured (unless both are
configured by a bootloader prior to XIP), run the MEMC sample from
internal code SRAM, and write data to the external PSRAM block via the
FlexSPI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
