Add Platform Secure Architecture support support to use
HW acceleration, which needs to be called under PSA driver wrapper
in mbedtls 3.x.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add kconfig CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT to get more mbedtls
functionality for enterprise and DPP.
Split cmake sources related to hostap SME and crypto backend.
Default backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO use internal crypto
and some mbedtls apis.
Backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT use most mbedtls apis
and PSA apis, except some apis no longer supported in mbedtls 3.x,
or called in the middle of hostap and mbedtls.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Clarification of reviewer expectations and role. Emphasis
on clarifying when a PR can be closed.
Highlighting reviewers and assignee objective to guide PR
to a mergeable state, if possible.
Signed-off-by: David Leach <david.leach@nxp.com>
Previously, one-line changes were tagged as "Trivial".
The description of the "Trivial" label states:
"Changes that can be reviewed by anyone, i.e. doc changes, minor build
system tweaks, etc.".
Just because a change only affects a single line of code, it does not
mean that it is a trivial change. It may have difficult to understand
implications which require approval of the responsible maintainer.
For this reason, change the label to "size: XS" and let humans judge
if a PR is trivial or not.
Signed-off-by: Martin Jäger <martin@libre.solar>
This reverts commit 99aa65c725.
With this change, various simulators fail with no output with this
change.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The byteSENSI-L is a fun LoRa device based on nRF52 MCU that integrates
many sensors.
Signed-off-by: Rico Ganahl <rico.ganahl@bytesatwork.ch>
Signed-off-by: Guy Morand <guy.morand@bytesatwork.ch>
Define the configuration to run the code_relocation
application on the external memory dual quad flash
of the stm32h745i/stm32h750b disco kits in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change the board.cmake to add the external loader option
to the STM32CubeProgrammer to flash the external NOR
flash and internal memory
The address of the external flash is not needed
when flashing a hex file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change the board.cmake to add the external loader option
to the STM32CubeProgrammer to flash the external NOR
flash and internal memory
The address of the external flash is not needed
when flashing a hex file.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the quad-spi in DualFlash Mode when enabling the MemoryMapped
then reading is possible with memcopy.
DUAL flash mode is possible on stm32 series with QUADSPI_CR_DFM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the quad-spi in DualFlash Mode
This property of the stm32 boards will access simultaneously
two identical quad-flash external memories connected to
2 quad-spi banks (pins).
Dual Flash Mode is possible on stm32 series with QUADSPI_CR_DFM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A single trigger of the TASK_FREQ_CHANGE task might not be enough, so
trigger twice to make sure the frequency gets updated.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Get the flash device from the node compatible, instead of an alias.
This removes the need for the `spi-flash0` alias on every board with one
of these drivers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update the sample to use a camera shield with a camera chosen node.
This is not only because the camera nodes in the mimxrt1064 device
tree has been now moved to a separate mt9m114 shield but also to
make the sample more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The default resolution of mt9m114 camera is now changed to 480x272.
Update the sample documentation to reflect this change.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Use poll() to wait for connect attempt to complete or timeout. That way
connect() does not block Native Simulator on host syscall.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far only a single blocking API could be handled simultaneously, due to
epoll_ctl(..., EPOLL_CTL_ADD, ...) returning -EEXIST when same file
descriptor was added twice.
Follow 'man epoll' advice about using dup() syscall to create a duplicate
file descriptor, which can be used with different events masks. Use such
duplicate for each blocking API except ioctl() (for handling Zephyr poll()
syscall).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Introduce nsos_poll_if_blocking(), which replaces common code in:
* nsos_accept_with_poll()
* nsos_recvfrom_with_poll()
This will allow to introduce similar behavior for other blocking APIs in
subsequent commits.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add devicetree nodes for the two FlexCAN instances present on the
MCXN94x. Only CAN classic is enabled for now due to issues with FlexCAN FD
in relation to the implementation on this SoC.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When the encoder button was pressed, it would send a LV_KEY_LEFT/RIGHT
instead of a LV_KEY_ENTER event.
This clears the enc_diff field, and set the key field to LV_KEY_ENTER
for button events.
Fixes#73529
Signed-off-by: Lorenz Clijnen <lorenz_reclame@outlook.be>
On nRF54H20DK the USB PHY is powered from VBUS. When the USB cable is
not connected, the PHY is not powered and the PHY clock disappears.
Because the GOUTNAKEFF and INEPNAKEFF can only ever be set when PHY
clock is active, the waits for these bits do timeout if cable is
disconnected. Workaround the issue by aborting the wait if vendor quirk
indicates that PHY clock has abruptly vanished.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The original driver has two defects: 1. When setting the next timeout
value the original implementation simply sets a delta value equal to
ticks * CYC_PER_TICK. This operation is reckless and may incorrectly
"reset" the fractional tick, causing clock skew. 2. The original
implementation doesn't handle the counter overflow situation. When the
counter overflows from 0xffffffff to 0x0, the uptimer counter becomes
incorrect. We have fixed above issue by rewriting most of the functions in
this driver and verified it by running all tests under
tests/kernel/timer folder.
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
