The go tool documentation is very old, and the tool is not
recommended for use, therefore remove all documentation relating
to it to prevent people from using it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
While Breathe seems to not care and creates hyperlinks either way, the
proper role to mention a C enumerator is :c:enumerator:. :c:enum: is to
be used to refer to the enum itself.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Allow changing the target server address on interoperability
tests.
This allows running same testcases against public Leshan
instance. It is a first requirement to run same tests
on a real HW.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When the broadcast source unexpectedly disappears then the broadcast
sink does a remove source command and resets.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
This commit adds host support for the Path Loss Monitoring
feature see Bluetooth Core specification, Version 5.4,
Vol 6, Part B, Section 4.6.32.
Limited logic is required, just adding a wrapper around the
HCI command and callback for HCI event.
Add new zone - BT_CONN_LE_PATH_LOSS_ZONE_UNAVAILABLE, to
convert 0xFF path loss to a useful zone.
Add new Kconfigs and functionality to the bt shell.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Restructure the Contribution Guidelines page in the documentation.
Create the 'Pull Request Guidelines' section containing the best
practices for creating Pull Requests.
Improve commit message guidelines: instruct contributors to refer to
GitHub issue in the PR message instead of commit message when
submitting a fix; add a description of `Link:` tags for refering to
other relevant information.
Move 'clang-format' and 'twister' subsections to the new PR
Guidelines section.
Delete outdated/incorrect information about how to run tests locally
with twister.
Describe the `check_compliance.py` script as the recommended tool for
checking compliance of changes and how to run the script locally.
Remove 'gitlint' subsection.
Add a list of recommended steps for getting a new PR accepted quickly.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Enable execution of ADC driver tests on nrf54l15.
Overlay file for nrf54l15 already exists.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
A custom reset scheme is required for the nRF54H20 SoC so that debug
works out of the box. This magic will eventually be part of JLink.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Fix Doxygen comment for shell_mqtt_get_devid which contained a funky
Unicode char (U+FF08) for a left parenthesis that can cause issues with
some documentation tools.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The existing code in the cap_stream.c that handled the
check before calling CAP initiator unicast functions
seemingly did not work for x86 targets such as native_sim
or native_posix.
Modified the check so that IS_ENABLED is used directly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Align the name of the ETH PTP Config Status values
depending on the stm32HAL serie
to be the HAL_ETH_PTP_NOT_CONFIGURATED/HAL_ETH_PTP_CONFIGURATED
or HAL_ETH_PTP_NOT_CONFIGURED/HAL_ETH_PTP_CONFIGURED
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update the HW models module to:
6c389b9b5fa0a079cd4502e69d375da4c0c289b7
Including the following:
* 6c389b9 PPI (52): Connect CCM TASK_RATEOVERRIDE
* 2056253 CCM: Change TASK RATEOVERRIDE warning to info
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following configuration options:
SYS_CLOCK_HW_CYCLES_PER_SEC
SYS_CLOCK_TICKS_PER_SEC
should get their values according to lp_clock node's
clock-src property.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
Introduced temporary variables `buf0_xor` and `buf1_xor` to store
XOR results and added an explicit cast to `uint16_t` for
the `*len` variable.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Correct the boundary condition in `fcb_put_len` function to
properly include `FCB_MAX_LEN` and change the #define to address
the potential flaw where `CHAR_MAX` might be treated as unsigned by
the compiler flag `-funsigned-char`, which would yield `FCB_MAX_LEN`
to 0x7fff instead of 0x3fff.
Fixes#73868
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
adsp_memory.h is pretty much the same for all ace platforms.
Generalize it getting register address from devicetree and
and move it to a common place.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The assert was verifying that the current sensor address was greater
or equal than the start of the iterable section - 1 which isn't quite
right as the start is inclusive.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adjusted the board's device tree after ENET_1G compatible changed
from "nxp,kinetis-ethernet" to "nxp,enet1g".
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add driver for Realtek RTL8211F 10/100/1000M ethernet PHY.
This driver implements vendor specific behaviour like
detecting link state change by GPIO interrupt, which is not
present in the generic MII driver.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add a kconfig preprocessor function to check if
any node of a certain compatible has a specific property in DT.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
- Added nxp,enet1g compatible to distinguish between ENET (nxp,enet)
and ENET_1G (nxp,enet1g) peripherals within the same driver.
- Added config ETH_NXP_ENET_1G to enable 1G mode of operation on ENET_1G.
- Support RGMII mode of connection between MDIO and PHY to be
able to work with ENET_1G peripheral and support 1000M speed.
- Removed performing of PHY reset before configuring link - it is
not desirable for RTL8211F PHY connected to ENET_1G on RT1170.
Reset of other PHYs can be performed by PHY driver itself if required.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add option for RGMII connection type between the MAC and the PHY
device into the ethernet controller binding.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add ENET_1G clock value to the RT11XX CCM version.
Implemented enabling ENET_1G clock and getting its frequency.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
New Twister option `--footprint-report` is introduced to collect and
write detailed memory footprint results for symbols as an additional
JSON file. By default, the new option is disabled.
The new option implies and extends `--create-rom-ram-report`, so there
are three choices: 'ROM', 'RAM', and 'all' to select what memory area
symbols to report in `twister_footprint.json`.
In case of the custom report name, or per-platform report, it is always
composed with the rightmost '_footprint.json' suffix.
The memory footprint report has similar structure as `twister.json`
and compelements it having reduced set of test suite properties:
- instead of `testcases` it contains `footprint` object with
`rom.json` and `ram.json` artifacts embedded there;
- other properites are limited to represent only the essential test
suite context, thus to allow further data processing consistently
and independently from the `twister.json`.
- 'filtered' test instances are not included into the footprint report.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
When Twister composes resulting twister.json reports, add optional
filtering by a test instance resulting status and/or its individual
properties to be allowed/denied on output to the JSON file.
This internal feature is introduced to facilitate JSON reports with
a custom data schema.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Introduce driver for ov7670 camera, supporting QCIF,QVGA,CIF, and VGA
resolution in YUV and RGB mode.
Support was verified on the FRDM-MCXN947, using the SmartDMA camera
engine, which is enabled in the following PR:
https://github.com/zephyrproject-rtos/zephyr/pull/72827
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_NO_PBKDF2 and CONFIG_NO_CONFIG_BLOBS definition
and let them be decided in kconfig.
CONFIG_NO_PBKDF2 is default y when crypto backend is
WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE.
CONFIG_NO_CONFIG_BLOBS is default y when both DPP and enterprise disable.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
