Update the status to maintained, add a maintainer and collaborators, and
also update the label to match the recent spelling change ("SiLabs" ->
"Silabs").
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add Johan, Jérôme and Aksel to Silabs Platforms. Also update the subsystem
and GitHub label name from "SiLabs" to "Silabs", since this is the more
usual spelling.
Signed-off-by: Aksel Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
In new hardware model, the arch subfolder is no more: updating cmake config
documentation to reflect this change
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Add descriptions for recently introduced IPv4 and IPv6
connectivity events to the net event monitor.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Modify the test cycle routines to verify recently added IPv4- and
IPv6-specific events.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
conn_mgr now fires:
- NET_EVENT_L4_IPV4_CONNECTED
- NET_EVENT_L4_IPV4_DISCONNECTED
- NET_EVENT_L4_IPV6_CONNECTED
- NET_EVENT_L4_IPV6_DISCONNECTED
These events track whether there are any ready ifaces offering
specifically IPv4 or specifically IPv6 connectivity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Don't track up/down blame separately.
Instead, track a single last-blame iface.
Don't track blame iface inside set_ready.
Instead, track directly inside handle_update.
These two changes will simplify the addition
of blame for IPv4- and IPv6-specific events.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Instead of incrementing and decrementing global counter,
just recompute the ready-count from scratch every time
conn_mgr_mon_handle_update is called.
This will simplify the introduction of additional ready count types.
This should have no externally observable impact on the behavior of
conn_mgr.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
In case of ACD Probe/Announcement, all we need is to generate ARP
packet, we don't really want any cache entries to be created or searched
for. There was a bug, that a cache entry was created for the
Announcement sent, resulting in skipped ARP packet generation and
malformed packet being sent by the ACD module.
Therefore, simplify all this, by simply returning early in case of
conflict detection packets.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The autoconf module can now reuse generic address conflict detection,
which was added for all address types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a conflict was detected on a DHCP-assigned address, send a
Decline message to the server and start over.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case IPv4 conflict detection is enabled, monitor network events to
determine whether IPv4 address is ready to use or not, so that the
library returns only after the network setup is fully complete.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Connection manager needs to monitor ACD events as well to determine
whether a preferred IPv4 address is available.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for IPv4 conflict detection, as specified in RFC 5227.
The new feature is optional and disabled by default.
Address conflict detection was implemented as a part of the IPv4
autoconf feature can be generalized to be available for all address
types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the CONFIG_BOOT_BANNER flag is set to "n", but CONFIG_BOOT_DELAY
is enabled, there is a delay message printed at boot time.
This allows for the whole boot banner to be disabled.
Signed-off-by: Krzysztof Sychla <ksychla@antmicro.com>
The VDED was adding the channel information per clone. But it could be
done in the original buffer. This commit fixes that by adding the
channel information to the original buffer and not for each clone. As a
result, we have a more straightforward VDED execution with fewer copies.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Move the audio related files to a new subdirectory called
audio.
The purpose of this is to clean up the file structure a bit,
and also allow for better filtering of the files.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When low power mode is enabled then whenever UARTE is not active,
driver attempts to put the peripheral into the lowest power state
by stopping and disabling UARTE. However, it did not put pins into
sleep state which could lead to increased current consumption.
Adding pins state handling to the low power mode.
Pins are put into sleep state only if CONFIG_PM_DEVICE=y.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In function pcal64xxa_process_input, lock was not released in case of
error when calling inputs_read.
This was causing an infinite wait in the following calls of functions
using I2C bus.
Signed-off-by: Vincent Geneves <vgeneves@kalray.eu>
Add a symbol to enable device power state constraints this
saves resources when this feature is not needed.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Test that device pm state constraints work as expected.
It declares a device in DT that specify that two pm states cause
power loss and use this information when the device is in the middle
of an action.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Declare power state constraints for a device in devicetree.
It allows a map between device instances and power states that disable
their power. This information is used by a new API
(pm_policy_device_power_lock_put/get) that automically set/release
pm state constraints.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Removed an unnecessary cast to void * from a function that already
had the correct signature.
This makes for more portable code as casting between code and data
pointers are frowned upon by the C standard.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
Remove pre hardware model v2 overlays present for RT11xx boards, that
were missed in the HWMv2 migration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In commit a30c5731ae (tests: drivers: can: api:
support numaker_m2l31ki, 2024-05-31), CONFIG_USERSPACE was disabled for
the numaker_m2l31ki. This fix is valid to support running the CAN API
testsuite, but Zephyr's infrastructure does not properly support
disabling userspace at the board level.
As a temporary workaround, reenable userspace to fix failing CI tests
on this board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Replace the leftover `&&` operator with UTIL_AND(), so that this DT API
can be evaluated at C preprocessor time.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Abstract slab pointer validation and apply it to block dequeue during
allocation in addition to the existing block freeing. This should help
catching some buffer overflow induced corruptions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
As it is, blocks are allocated going backward within the buffer.
There is nothing fundamentally wrong with that, but it makes debugging
unnatural with the successively descending addresses. Create the free
list so pointers are oriented forward, at least initially.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This macro allows to know the size of a struct member at compile time.
Several parts of the Zephyr code are currently using directly the macro
code.
Also added a unit test.
Signed-off-by: Adrien Ricciardi <aricciardi@baylibre.com>
Unmount and remount filesystem during init, to verify that filesystem
remount works as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Make call to de-initialize disk in fatfs_unmount(). This will permit the
disk to be reinitialized when it is mounted with fatfs_mount().
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add DISK_IOCTL_CTRL_DEINIT ioctl command to disk subsystem. When
disk_access_ioctl() is called with this command, the disk will be
de-initialized. After this IOCTL completes, the disk can safely be
reinitialized.
Fixes#60628
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add DISK_IOCTL_CTRL_INIT IOCTL to initialize a disk. This IOCTL is
intended to replace disk_access_init() for new applications, but
disk_access_init() is kept for legacy compatibility. The INIT IOCTL is
added to better match the path that will be used for disk
de-initialization. Like the disk_access_init() calls,
DISK_IOCTL_CTRL_INIT calls are reference counted
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Reference count initialization calls for disks. This changes the
behavior of the disk_access_init() function, such that disks will no
longer be initialized again if the first disk access init call
succeeds.
Disk access is reference counted in preparation for supporting disk
de-initialization, where a balanced number of disk de-initialization
calls with disk initialization calls will de-initialize the disk.
Also, remove code in disk drivers that was already checking against
duplicate disk_access_init() calls.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
