On STM32G0, the backup memory is defined as part of the TAMP peripheral.
Use the same workaround as on STM32WL to add the node as part of the
RTC.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On devices where the backup memory is part of the TAMP peripheral, the
Backup Domain Protection prevents write to the backup registers. This
fix disables the protection before writing registers and re-enables it
afterwards.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Until now, the support for Silicon Labs SoCs is limited to the Gecko
families.
This commit allows upstreaming support for non-Gecko based SoCs produced
by Silicon Labs (i.e. SiM3U1xx).
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Include new AT shell alongside the PM device shell to allow
for powering back up the modem after the sample has completed
to test out the at shell.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add AT shell which uses the newly exposed pipes to
send/receive at commands from the modem identified by the
chosen node zephyr,at-shell.
To send an AT command, the shell command at is used, followed
by the command to send, and an optional response which
overwrites the default "OK"
For example, sending "AT", which returns "OK"
modem at at <- command
OK <- response
Enabling echo, then sending "AT" which will now return "AT" + "OK"
modem at ati1 <- command
OK <- response
at at <- command
at <- response
OK <- response
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add two DLCI channels to the cellular modem driver, and expose
them using the modem pipelink module.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add modem pipelink module which exposes modem pipes globally.
The pipelink module implements a callback to inform when a
pipe becomes available to use by whichever modem is attached
to it. This could be a shell, or a network interface.
The module aims to allow modem drivers to be split into modules,
and allowing applications to implement their own custom logic
without altering the modem drivers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The preprocessor gives this error when calling zsock_sendto
in user mode when there is a mismatch with amount of parameters
to the sendto wrapper call.
tests/net/socket/udp/src/main.c: In function ‘comm_sendto_recvfrom’:
tests/net/socket/udp/src/main.c:125:46: error: macro "zsock_sendto" \
requires 6 arguments, but only 5 given
125 | 0, &addr, addrlen);
| ^
In file included from include/zephyr/net/socket.h:1381,
from tests/net/socket/udp/src/main.c:15:
include/generated/zephyr/syscalls/socket.h:266: note: \
macro "zsock_sendto" defined here
266 | #define zsock_sendto(sock, buf, len, flags, dest_addr, addrlen)
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If network socket tracing is enabled, then the system will track
various socket API calls for usage.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The clock should be initialised only once at the
drivers init function.
Check wether the subsys needs to be disabled in
peripheral initialization according to reset reason
in clock control.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add a __ASSERT_ON guard around slab_ptr_is_good, as that is only used in
assertions and leaving it on seems to generate a build warning with some
clang versions:
kernel/mem_slab.c:207:20: error: unused function 'slab_ptr_is_good'
207 | static inline bool slab_ptr_is_good(struct k_mem_slab *slab,...
| ^~~~~~~~~~~~~~~~
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Handle MPI and root manifest for radio core separately from the main
build system logic.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
Introduce a sample for BlueNRG-based devices to support interaction with
ST BlueNRG GUI application based on U(S)ART protocol.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Add API to perform hardware reset optionally entering firmware updater
mode.
Remove redundant declaration for bt_spi_send_aci_config; otherwise, we will
have compiler warning if CONFIG_BT_BLUENRG_ACI is not set.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
this commit introduces a usart pinctrl node to enable the spi functionality
in the efr32_radio board. the location* properties have been deprecated
so pinctrl support has been added in the device tree included file.
Before this commit (using deprecated location properties):
- usart@40010400 (DISABLED)
After this commit (using pinctrl properties):
- usart@40010400 (READY)
Signed-off-by: Arunmani Alagarsamy <arunmani.a@capgemini.com>
This commit fix the mismatch between flash partition labels and node
roles on the efr32xg24_dk2601 board.
Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net>
Adding bt_tester support.
Adding bt_tester app build
with Twister for frdm_rw612 board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Twister builds added on peripheral/central ht and
enabled Power manager on those examples to cover
the CI builds with PM enabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
- Update Doc with BLE info
- Configure board for BLE
- Add pinctrl for flexcomm0 in usart mode
needed for BLE tester application
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Add build check that would detect unwanted calls
from the `iram0.loader_text`, which is the last
bootloader segment to be alive.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Improve ETSI 303645 layout both for HTML (use more appropriate column
widths) and PDF (use landscape orientation).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Optimize slot sizes for MCUBoot swap move algorithm
for frdm_k22f/k64f/k82f, twr_ke18f/kv58f220m,
hexiwear_mk64f12 and rddrone_fmuk66 boards.
- Use DT_SIZE_K/M macros for slot sizes.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
EXPORT_SYMBOL() isn't needed when CONFIG_LLEXT is deselected, it only
needlessly creates objects, that make the resulting image larger.
Make it a NOP when CONFIG_LLEXT=n.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When BCM4 bit is set to zero, the hardware semaphore clock is never
enabled on startup. The hardware semaphores might still randomly work,
but very unreliably, and the locking procedure will need several retries
despite no competition on the hardware semaphores. This leads to wasted
clock cycles on the M4 and sometimes even random kernel panics.
This can be solved by always enabling the hardware semaphore clock in
the init procedure of the M4, regardless of whether it is used within
the initialization or not. On the M7, it is already always enabled.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
Replaced tcp_out() with tcp_out_ext() when sending
SYN during tcp connect, so we can intercept error value,
beacuse in such case the packet would not be sent at all
and the stack would not trigger any mechanism to flush
this context so it ends up leaking. These scenarios can
arise when the underlaying interface is not properly
configured or is disconnected. The conn is marked to be
closed and is closed before exiting tcp_in().
Since we can now identify this case we can also exit
early in the net_tcp_connect() function and not wait
for any timeout.
Signed-off-by: Daniel Nejezchleb <dnejezchleb@hwg.cz>
This commit updates migration-guide and release-notes docs with
the changes introduces by PR 71827 and PR 72243.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Found via static analysis. Two separate error paths where failing to
check the return code leads to undefined behavior:
1. In `litex_clk_get_phase`, the divider stays set to 0 when
`litex_clk_get_clkout_divider` errors out, which leads to a division
by 0.
2. In `litex_clk_calc_duty_normal`, the `duty` struct is used
uninitialized if `litex_clk_get_duty_cycle` errors out.
In both case, checking the return code and returning early resolves the
issue.
Signed-off-by: François Baldassari <francois@memfault.com>
Use BLE.ADDR to create unique (to some extent) EUI64
on nRF54H20 in some cases inside the IEEE 802.15.4 driver.
The amount of EUI64-s available in such a way is very limited
(~16 million).
However, currently there does not seem to be another feasible way to
get device identifiers on nRF54H20 (such are kept in SICR, to which the
radio core has no access).
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Adds an appropriate condition to the Kconfig as
the temperature driver is not supported for nRF54H20 devices yet.
Without this change, a build with NRF 802.15.4 libraries produces
Kconfig error.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
This commit fixes the issue where a serialization
error was reported after properly sending a data with 'icbmsg' backend.
The icbmsg send function's return code is set to
the sent data's len as in other backends.
The related docs were fixed and updated.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Clock_control is currently not supported on nRF54H20.
This commit adds new way of handling the hfclk targeted for nRF54H20.
This solution shall be replaced once the clock_control is supported
for nRF54H20.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Adds channel 15 to the pool of grtc channels available
for allocation (i.e. with 'z_nrf_grtc_timer_chan_alloc')
on nRF54H20.
The change is motivated by lack of available channels
for the nrf_802154_timestamper when building for nRF54H20.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Move STM32_MEMMAP outside of SOC_FLASH_STM32.
That allows memory-mapped application to
be built without internal flash controller.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This commit should deal with adding a missing
direction case as memory-to-peripheral
and peripheral-to-memory transfers
should be considered the same.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should address the #73803 issue
where the DMA node does not provide support
for the #dma-cells binding. Peripherals should
specify one or more DMA channels via the dmas
and optionally dma-names DT properties.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Our documentation uses image formats such as WebP that are not supported
by LaTeX. This commit enables Sphinx's sphinx.ext.imageconverter
extension, and updates the documentation to indicate ImageMagick is
required to build docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
