Fix Doxygen comment for shell_mqtt_get_devid which contained a funky
Unicode char (U+FF08) for a left parenthesis that can cause issues with
some documentation tools.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The existing code in the cap_stream.c that handled the
check before calling CAP initiator unicast functions
seemingly did not work for x86 targets such as native_sim
or native_posix.
Modified the check so that IS_ENABLED is used directly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Align the name of the ETH PTP Config Status values
depending on the stm32HAL serie
to be the HAL_ETH_PTP_NOT_CONFIGURATED/HAL_ETH_PTP_CONFIGURATED
or HAL_ETH_PTP_NOT_CONFIGURED/HAL_ETH_PTP_CONFIGURED
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update the HW models module to:
6c389b9b5fa0a079cd4502e69d375da4c0c289b7
Including the following:
* 6c389b9 PPI (52): Connect CCM TASK_RATEOVERRIDE
* 2056253 CCM: Change TASK RATEOVERRIDE warning to info
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The following configuration options:
SYS_CLOCK_HW_CYCLES_PER_SEC
SYS_CLOCK_TICKS_PER_SEC
should get their values according to lp_clock node's
clock-src property.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
Introduced temporary variables `buf0_xor` and `buf1_xor` to store
XOR results and added an explicit cast to `uint16_t` for
the `*len` variable.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Correct the boundary condition in `fcb_put_len` function to
properly include `FCB_MAX_LEN` and change the #define to address
the potential flaw where `CHAR_MAX` might be treated as unsigned by
the compiler flag `-funsigned-char`, which would yield `FCB_MAX_LEN`
to 0x7fff instead of 0x3fff.
Fixes#73868
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
adsp_memory.h is pretty much the same for all ace platforms.
Generalize it getting register address from devicetree and
and move it to a common place.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The assert was verifying that the current sensor address was greater
or equal than the start of the iterable section - 1 which isn't quite
right as the start is inclusive.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adjusted the board's device tree after ENET_1G compatible changed
from "nxp,kinetis-ethernet" to "nxp,enet1g".
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add driver for Realtek RTL8211F 10/100/1000M ethernet PHY.
This driver implements vendor specific behaviour like
detecting link state change by GPIO interrupt, which is not
present in the generic MII driver.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add a kconfig preprocessor function to check if
any node of a certain compatible has a specific property in DT.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
- Added nxp,enet1g compatible to distinguish between ENET (nxp,enet)
and ENET_1G (nxp,enet1g) peripherals within the same driver.
- Added config ETH_NXP_ENET_1G to enable 1G mode of operation on ENET_1G.
- Support RGMII mode of connection between MDIO and PHY to be
able to work with ENET_1G peripheral and support 1000M speed.
- Removed performing of PHY reset before configuring link - it is
not desirable for RTL8211F PHY connected to ENET_1G on RT1170.
Reset of other PHYs can be performed by PHY driver itself if required.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add option for RGMII connection type between the MAC and the PHY
device into the ethernet controller binding.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add ENET_1G clock value to the RT11XX CCM version.
Implemented enabling ENET_1G clock and getting its frequency.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
New Twister option `--footprint-report` is introduced to collect and
write detailed memory footprint results for symbols as an additional
JSON file. By default, the new option is disabled.
The new option implies and extends `--create-rom-ram-report`, so there
are three choices: 'ROM', 'RAM', and 'all' to select what memory area
symbols to report in `twister_footprint.json`.
In case of the custom report name, or per-platform report, it is always
composed with the rightmost '_footprint.json' suffix.
The memory footprint report has similar structure as `twister.json`
and compelements it having reduced set of test suite properties:
- instead of `testcases` it contains `footprint` object with
`rom.json` and `ram.json` artifacts embedded there;
- other properites are limited to represent only the essential test
suite context, thus to allow further data processing consistently
and independently from the `twister.json`.
- 'filtered' test instances are not included into the footprint report.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
When Twister composes resulting twister.json reports, add optional
filtering by a test instance resulting status and/or its individual
properties to be allowed/denied on output to the JSON file.
This internal feature is introduced to facilitate JSON reports with
a custom data schema.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Introduce driver for ov7670 camera, supporting QCIF,QVGA,CIF, and VGA
resolution in YUV and RGB mode.
Support was verified on the FRDM-MCXN947, using the SmartDMA camera
engine, which is enabled in the following PR:
https://github.com/zephyrproject-rtos/zephyr/pull/72827
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_NO_PBKDF2 and CONFIG_NO_CONFIG_BLOBS definition
and let them be decided in kconfig.
CONFIG_NO_PBKDF2 is default y when crypto backend is
WIFI_NM_WPA_SUPPLICANT_CRYPTO_NONE.
CONFIG_NO_CONFIG_BLOBS is default y when both DPP and enterprise disable.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add Platform Secure Architecture support support to use
HW acceleration, which needs to be called under PSA driver wrapper
in mbedtls 3.x.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add kconfig CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT to get more mbedtls
functionality for enterprise and DPP.
Split cmake sources related to hostap SME and crypto backend.
Default backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO use internal crypto
and some mbedtls apis.
Backend CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT use most mbedtls apis
and PSA apis, except some apis no longer supported in mbedtls 3.x,
or called in the middle of hostap and mbedtls.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Clarification of reviewer expectations and role. Emphasis
on clarifying when a PR can be closed.
Highlighting reviewers and assignee objective to guide PR
to a mergeable state, if possible.
Signed-off-by: David Leach <david.leach@nxp.com>
Previously, one-line changes were tagged as "Trivial".
The description of the "Trivial" label states:
"Changes that can be reviewed by anyone, i.e. doc changes, minor build
system tweaks, etc.".
Just because a change only affects a single line of code, it does not
mean that it is a trivial change. It may have difficult to understand
implications which require approval of the responsible maintainer.
For this reason, change the label to "size: XS" and let humans judge
if a PR is trivial or not.
Signed-off-by: Martin Jäger <martin@libre.solar>
This reverts commit 99aa65c725.
With this change, various simulators fail with no output with this
change.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sets CONFIG_MAX_THREAD_BYTES to 3 as the tests need a few
more bits to build for board intel_adsp/ace30_ptl.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
