There is reverted CPA check condition in routines:
dai_ssp_pm_runtime_en_ssp_power()
dai_ssp_pm_runtime_dis_ssp_power()
In result disable always timeouts while enable returns before
CPA bit set. This cause sporadic exceptions on HW.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Currently Code Cache cannot be enabled because its initialization is
guarded by Kconfig options which depend on CPU core cache support,
but S32K14x devices has a SoC specific L1 cache controller. Hence,
introduce a SoC-specific symbol to enable Code Cache.
Note that the cache controller is not available for S32K11x devices.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This commit adds bbtc implementation.
New file in modules/openthread/platform/ble.c
New corresponding kconfig option `OPENTHREAD_BLE_TCAT`.
Co-authored-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
This commit bumps openthread commit to `4ed44bc`
and implements `CONFIG_OPENTHREAD_MULTIPAN_RCP` option.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The IPv4 TTL and IPv6 hop limit value getter and setter functions
were not documented properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Don't assert that `pm_device_runtime_get` is not running in an ISR
context, as `runtime_suspend` properly handles that condition.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Modify the VCP volume controller callbacks to support
multiple registers by making it into a linked list.
This allow for multiple applications to get the information
from procedures or notifications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the gpio_kbd_matrix_set_detect_mode to skip setting gpio
interrupts if we don't have callbacks configured. This is the case if
the driver is running in poll or scan mode.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable code coverage for debug.coredump.drivers.api.* test suite
adding custom fatal error handler to dump code coverage data
when the test halts as expected.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The conf and overlay files to properly compile the wifi samples were
omitted for the Xiao_esp32c3 board. I've added those two files and
confirmed that the sample properly compiles and runs.
Signed-off-by: Robert Baruch <robertbaruch@mac.com>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add Kconfig choice for the user to select how Network Events are
handled. It's own thread, the system work queue or synchronous when
events are emitted.
By default a separate thread is created to be backwards compatible.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The CAP Initiator and the CAP Commendar share quite a lot of
functionality in terms of discovery and performing set-based
procedures.
The code for handling most of this has been moved to
cap_common.c to avoid duplicating code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a note that the shell mcuboot erase command can no
longer erase the MCUboot or application slots
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Prevents the user from potentially bricking a device by erasing
the MCUboot or currently running application flash areas with the
mcuboot erase command
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The address of most of the registers defined in
the driver are wrong. This fixes it, following
the correct numbering as can be found in the
device's datasheet. Moreover, re-grouping of
the macros according to their functionality.
Signed-off-by: Nikos Agianniotis <na@neq.dk>
Updates both the k_sleep() and k_usleep() return values so that if
the thread was woken up prematurely, they will return the time left
to sleep rounded up to the nearest millisecond (for k_sleep) or
microsecond (for k_usleep) instead of rounding down. This removes
ambiguity should there be a non-zero number of remaining ticks
that correlate to a time of less than 1 millisecond or 1 microsecond.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates both the app_kernel and latency_measure testcase scripts
to include a scenario involving object core statistics. This can
then be used to estimate the performance cost of using this feature
post-execution by comparing its results to the scenario where it is
not enabled.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
In the kconfig descriptions and the links to documents
replace native_posix with native_sim, or a generally
applicable description.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use native_sim in the help messages platforms examples
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The comment applies to all POSIX arch based targets,
not just native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There are functions whose headers are only visible when
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT is selected. However these
functions are used outside the scope of the firmware update pull
functionality. This change allows to disable
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT while still being able to use
the firmware update object.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
The EXTRA_DTC_OVERLAY_FILE is also an important build system variable,
therefore add it to the list and give a brief description.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
It's bad form, especially since in that case, it's always the same function
that is called `bt_att_sent()`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The Network Connectivity API page is kind of pointless, as it provides
little information (which can be found elsewhere as well) and it was
pointer out that it kind of creates noise in the documentation as it can
be confused with the page which provides a summary of network APIs.
Therefore, remove the page, and move the information from it elsewhere.
The brief summary of what APIs to use was moved the Networking APIs
index page. The information about the samples demonstrating BSD sockets
API usage was moved to the BSD sockets documentation page itself.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Several application protocol libraries documentation missed information
on how can they be enabled (i. e. missed info about associated Kconfig
symbol). This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As the display API now check against valid callback functions and
returns -ENOSYS (or equalent), there is no need to provide
such functions in the driver code.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Basically all display drivers implements a few dummy functions that
just returns due to lack of capabilities.
Move that validation to the driver API instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Update the release notes and migration guide for CoAP events using
the Network Events subsystem.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
