Currently on zephyr, RAIL is used only for bluetooth. RAIL library is
needed to use efr32 radio regardless of the protocol used. We add
SOC_GECKO_USE_RAIL kconfig option to indicate if we use radio.
FPU is needed when using RAIL, we configure it if SOC_GECKO_USE_RAIL
is set.
Signed-off-by: Antoine Bout <antoine.bout@silabs.com>
Extended the ISO broadcaster BSIM test with an additional
step to create a BIG using the test parameters.
Since this isn't properly implemented in the controller,
CONFIG_BT_ISO_ADVANCED has not been enabled in the
prj.conf yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the test function to split it into multiple
smaller functions. This makes the main function much shorter
and easier to follow, and allows reusing of the individual
steps.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for setting advanced broadcast ISO parameters
using the ISO test commands. This allows the host to set
ISO parameters that the controller normally would handle.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add (optional) advanced ISO support for the benchmark ISO
sample. The CONFIG_BT_ISO_ADVANCED Kconfig simply needs to
be enabled in order to support the advanced settings.
This also reduces the number of default channels supported
to 1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for setting advanced unicast ISO parameters
using the ISO test commands. This allows the host to
set ISO parameters that the controller normally would
handle.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes an issue whereby the data packets were not checked to ensure
that the client has not attempted to write more data than the size
that was provided in the original upload packet.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes an issue whereby upload image size would not be checked in
the first packet of an upload, which would allow an image to be
uploaded until it reached the point of it being too large to
fit anymore.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Clarifies the details in the upload section of img_mgmt for MCUmgr
to better describe when fields should be sent, including a note
when a server responds with offset of 0.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fix an unused variable build warning that was happening in certain
configurations. Move the variables in the only condition where they are
actually used.
west build -p -b nucleo_f429zi \
-T samples/net/cloud/aws_iot_mqtt/sample.net.cloud.aws_iot_mqtt
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This change fixes a file descriptor leak that snuck-in
undetected in the original `gsoc-2022-thrift` project.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Calculate the Bosch M_CAN Message RAM addresses relative to the Message RAM
Base Address (MRBA), not the offset.
Fixes: #59624
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add CAN_MCAN_DT_MRBA() and CAN_MCAN_DT_INST_MRBA() macros for retrieving
the Bosch M_CAN Message RAM Base Address (MRBA) and clarify that the
existing CAN_MCAN_DT_MRAM_ADDR() and CAN_MCAN_DT_INST_MRAM_ADDR() macros do
not retrieve the base address, but rather the base address + the offset, if
any.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g474re. Define a 6kB storage_partition at the end of the
512kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The test thread and the system workqueue have the same priority,
so it is a bit arbitrary whether the workqueue cleans up
the send context before the next send.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Rename the phy-dev property with phy-handle to match the Linux
ethernet-controller binding and move it up to ethernet.yaml so that it
can be used by other drivers.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
At any ack, the retransmission timer was cancelled. This means when an ACK
is only partially acknowledging pending data, followed by a packet loss,
the connection ended in a deadlock eventually timing out.
By checking if there is any pending data for transmission before canceling
the retransmission timer, there is no risk of this lock-up any more.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
For platforms that select Kconfig option CONFIG_KERNEL_COHERENCE,
the receive buffer used in mq_timedreceive() must not be on the
stack. This is because the k_msgq that underlies the POSIX mqueue
will attempt to perform a direct to buffer copy from the sender
when there is a waiting reader.
Fixes#60796
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Now that vendor name in board compatible is meant to be actually used,
it should be properly filled.
Update when not correct and don't put any name when vendor is not known
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Ensure that the thread return value is set by `pthread_join()`
when `status` is non-NULL.
Additionally, we have an opportunity to synchronously clean
up thread stacks in `pthread_join()`, which is preferable.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
A thread that has been previously detached using
`pthread_detach()` should not be able to be joined. A recent
change made it so that `pthread_join()` would always report
success (0), even when `ret` (return value) had an error.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Discovered this while implementing c11 threads, but there
was a regression recently that made it so that `pthread_join()`
would report success when attempting to join a thread that had
been detached with `pthread_detach()`.
Technically now that is undefined behaviour, but historically,
we have reported `EINVAL`, which was the older specified
return value.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
A recent modification to the `build_all/sensor` testsuite changed
`build-only` to `false` in `testcase.yaml`, which is causing CI
to go bonkers.
https://bit.ly/3rSe0Te
Do not run build-only testsuites.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
There is no need to pass a second parameter to `pthread_join()`
if it is unused. Just use `NULL` instead.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The Thrift library has its own abstraction for mutexes, which
normally just a wrapper around `std::mutex` using the PIMPL
idiom (pointer-to-impl).
Since Zephyr does not yet support `std::mutex`, a workaround
was added in Zephyr that was essentially no-op, and actually
the PIMPL idiom made it quite easy to do that. However,
pretending there is no synchronization requirement is not a
solution for it.
We can't yet just use a `struct k_mutex` yet, because we
don't yet support userspace, but for now we can fake a mutex
interface with a spinlock.
We hope to eventually drop this workaround entirely and just
support `std::mutex`.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
I'm using a new account now.
Do the corresponding CODEOWNERS change just for consistency as well.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Add zephyr_udc0 nodelabel to allow building all USB device samples
for adafruit_feather_m0_basic_proto board out of the box.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adds a new serial shim driver for Intel SoCs. Builds upon the SEDI bare
metal UART driver in the hal-intel module.
Signed-off-by: Nachiketa Kumar <nachiketa.kumar@intel.com>
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
This PR introduces a backend API to be implemented by sensor emulators
that creates a standardized mechanism for setting expected sensor
readings in tests. This unlocks the ability to create a generic sensor
test that can automatically set expected values in supported sensor
emulators and verify them through the existing sensor API. An
implementation of this API is provided for the AKM09918C magnetometer.
A generic sensor test is also created to exercise this implementation.
Observe that this test knows nothing about the AKM09918C; info about
supported channels and sample ranges is discovered through the backend
API. The test iterates over all devices attached to the virtual I2C and
SPI buses in the test binary's device tree, which (theoretically) covers
all sensors. Sensors whose emulator does not exist yet or does not
support the backend API are skipped.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
The sensor driver uses the value 500 to convert bit counts to microgauss
values, but it should actually be 1500. Edit the driver unit test to use
the macro instead of a magic number.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Nordic Semiconductor has been testing the feature extensively on its CI.
The tests includes the sample data and the PTS tests.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
DMA only works with non-cached memory regions in H7. Check them
and return an error if they don't match this condition.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Enable adc0 with 2 channels 22, 23 on standard group with
normal end of conversion callback. Channels correspond to
VREFL(0V), VREFH(3.3V).
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Add support ADC SAR for NXP S32. ADC SAR diver
support 3 group channels (precision, standard
and external), run normal trigger in oneshot
conversion mode with 2 callbacks normal end
of conversion and normal end chain callbacks.
An instance only run on 1 group channel and
1 kind of callback at the same time.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
We have been dealing with missing and multiple binaries the same way and
both would result in a build error, which is not accurate. multiple
binaries in the build directory are fine, we just need to pick the right
one for parsing.
If we get no binaries, raise an exception and report failure, however,
if we have multiple binaries, filter intermediate artifacts out and
parse what remains.
qemu binaries generated after a run are also being filtered here. Those
are not build artificats and appear only after running in qemu. However
they have been causing issues on retries.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an option to control whether or not hpsram banks should
be switched off during the power down. This is particular useful
when running tests because we don't want to lose the contents
of the memory window before we capture it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
