Create the URI resource when creating the object if
PULL support is enabled.
URI write callback should be post-write instead to ensure
the URI value is updated for the resource.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add Kconfig option to the Ethernet L2 which allows to forward frames
with unknown EtherType further into the stack. This can be useful for
packet sockets, where further frame processing is application dependent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It turns out that all of the items listed under TODO section for packet
socket implmeentation has been adressed over time, threfore remove the
obsolete TODO.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix the existing DGRAM packet socket test. The test will now specify
LL destination address and protocol type. Also, update the fake ethernet
device send handler, so that it sets the packet network interface
corretly, so that the packet is not rejected at Ethernet L2.
Additionally, add two additional test cases verifying datagram packet
sockets. Fist test will exchange packet between RAW and DGRAM socket,
making sure that net stack forwards/removes L2 header correctly. The
second test verifies that it's possible to recieve a packet on both RAW
and DGRAM socket, making sure the received data has correct format.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Datagram AF_PACKET sockets were not processed properly by the net stack.
Instead of receving a packet already processed L2, and thus with L2
header trimmed, it was receiving a raw, unprocessed packet.
Fix this by calling net_packet_socket_input() for the second time, after
L2 has processed the packet. An updated connection handler module will
forward the packet correctly based on the corresponding socket type and
packet L2 processing status.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a new flag, indicating if packet has already been processed by L2 or
not. This can be used with AF_PACKET sockets, to select a proper socket
type for currently processed packet.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, the packet socket implementation in net_context required that
netowrk interface to transmit the packet to was set on every sendto()
call. This spoils the whole idea of binding a socket. Fix this, by
checking first if the net_conext is already bound to a particular
interface, and if so, do not throw an error in case sll_ifindex field is
not a valid interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
off_t is often unsigned long, which means printf needs to use %lx. Insert
a cast in case the value is unsigned int.
Signed-off-by: Keith Packard <keithp@keithp.com>
qsort_r is a GNU addition, so we need to #define _GNU_SOURCE to ensure
the prototype is defined in the header file.
Signed-off-by: Keith Packard <keithp@keithp.com>
We need to keep gcc from complaining about large calloc/malloc/realloc
sizes as that's what we're testing.
Define _BSD_SOURCE so that libraries sharing the glibc convention (like
newlib and picolibc) for controlling the API level visible to applications
will declare reallocarray(3), which is an OpenBSD extension to the C
library.
Signed-off-by: Keith Packard <keithp@keithp.com>
The initialized test buffers tx_data and tx2_data were not given a
specific size, but were initialized with one more byte than the
uninitialized buffers they get copied to. As a result, the memcpy found
a buffer overflow. Fix this by setting the source buffer sizes to match
the destination.
Signed-off-by: Keith Packard <keithp@keithp.com>
Somehow two files in subsys/mgmt/mcumgr/lib/cmd/img_mgmt/src ended up
using STRINGIFY but nothing in their include path ended up pulling in
zephyr/toolchain/common.h. Include that via zephyr/toolchain.h.
v2:
Use non-internal zephyr/toolchain.h header
Signed-off-by: Keith Packard <keithp@keithp.com>
This module has gone unmaintained and we do not have the resources to
respond to bug reports for it.
The TSC has decided to deprecate it for Zephyr v3.1 and remove it
entirely in Zephyr v3.2 unless a maintainer volunteers to keep this
module up to date and fix bugs.
This commit generates a warning at CMake time if this module is
compiled in. The warning will appear in the cmake output in the same
place that deprecated board or SoC warnings would.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We currently have mechanisms for deprecating both boards and SoCs.
However, we lack one for deprecating modules. This is inconvenient,
because we would like to do exactly that.
Handle this in a simple way by adding a new CMake file in the modules
directory which is responsible for warning the user about any
deprecated modules they may be using. See the source code comments for
more details about the approach.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The macro was remove for the GATT discover callbacks,
as only 2 out of 5 parameters for
BT_GATT_ATTRIBUTE were used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
To support both 8-bit and 32-bit Control/Status register variants, register
offsets need to be calculated from device tree.
Updated register data in device tree to the 32-bit CSR variant.
Renamed defines to be similar to other LiteX drivers.
Changed frequencies in clock-outputs nodes, so i2s/litex sample works.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Correct width when accessing LITEETH_RX_LENGTH register.
Also update register data in device tree to the 32-bit CSR variant.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
LiteX HAL should be used when accessing Control/Status registers to provide
compatibility between different data widths of CSRs.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
Make driver take register info from device tree so it can work with both
8-bit and 32-bit CSRs.
Signed-off-by: Michal Sieron <msieron@internships.antmicro.com>
anomaly_122_init() and anomaly_122_uninit() procedures implement
proper activate and deactivate procedures which are required for
achieve low power consumption.
The real workaround for the anomaly is buried inside hal function
nrf_qspi_disable() is called indirectly by the anomaly_122_uninit().
Therefore anomaly_122_init/uninit should be called for any
nrf QSPI device.
This patch renames functions and make call to them mandatory.
This fixes increased power consumtion issue on nRF53 device when
qspi was used.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
bring fixes from mcu-tools/mcuboot
- disables CONFIG_USB_DEVICE_REMOTE_WAKEUP as it is unsupported by MCUboot
- fix CONFIG_MCUBOOT_INDICATION_LED usage
- bootutil: zephyr: Fix not including tinycrypt path when needed
- bootutil: zephyr: Fix not linking with mbedtls when needed
- boot: zephyr: add Kconfig for arm cortex-m that implements a cache
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The description suggested logging information while it never
was the case: it was about adding additional "rsn":value pair
to an SMP response.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
GPIO_OUTPUT_INIT_HIGH and GPIO_OUTPUT_INIT_LOW don't initialize pin
directions. Use correct initialization values.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The commit adds release notes on fixing github issue 44535,
which describes problem with incorrect use of MGMT_ERR_ENOMEM when
MGMT_ERR_EMSGSIZE should have been used.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix Data Length Request CMD parameter checking to not
restrict invalid maximum Tx time values. This addresses
conformance test cases that provide maximum Tx time values
of 2128 us when not supporting Coded PHY in the Controller
implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly disabled tests that had been passing on
legacy LLCP implementation in the Controller.
Regression introduced in commit f023b5f611 ("Bluetooth:
controller: push topic branch to main").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As per 'Adding Secure Partition' in the TF-M documentation,
every secure partition must have a unique 32-bit partition ID.
If no value is provided, one will be auto-allocated by the
TF-M build system, but this can lead to unpredictable behaviour
in some cases. One example is key derivation where the partition
ID is used as part of the key derivation inputs. Different builds
can results in different PID values being assigned, resulting
in inconsistent key derivation output.
To avoid these problems, this commit sets a fixed PID as a
best pratice.
A value of 1000 has been set to place it within the
'PSA and user Partitions' range (256 - 2999) described in the
documentation.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
RPi Pico second stage bootloader generation seems to fail when using
Makefiles with:
gmake[2]: *** No rule to make target 'bootloader/boot_stage2.S'...
Changing the ExternalProject_Add byproduct to the actual generated file
and not the .S seems to fix the problem.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit updates information about running ZephyrOS on litex_vexriscv
SoC. It also add information about generating bitstream with
Zephyr on LiteX VexRiscv and LiteX SoC Builder.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Co-authored-by: Jagoda Szwedyk <jszwedyk@antmicro.com>
This add UART_NS16550_VARIANT_16550 configuration inside the choice
of UART_NS16550_VARIANT_NS16750 and UART_NS16550_VARIANT_NS16950.
The configuration is enabled by default to make NS16550 device to get
correct FIFO size configuration (16 bytes).
fixes#45783
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Added comments about new drivers, bug fixes, and enhancements made to
sensor drivers since the last release.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
When running twister during logging.log2_api_immediate_printk_cpp
on qemu_leon3, it reports unexpected eof even though the tests
reported successful. This results in twister reporting the test
being failed due to "unexpected eof".
When running it using west build, QEMU quits immediately after
printing PROJECT EXECUTION SUCCESSFUL instead of simply waiting
there for Ctrl-A X.
So workaround this by changing the main stack size to 4096.
Related to #46056
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The request timer started on the first l2cap channel when doing an MTU
reconfiguration has to be stopped when the response is received. Else the
channel will get into a bad state.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This commit adds a separate minimum RAM constraint for the thread-
safety stress tests because they have a significantly higher RAM
usage compared to the basic functional tests.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The net cases failed to run on sam_e70b_xplained
platform because failed to reserve data net buffers,so
adjusting the memory buffer to fix this.
Fixes#42857
Signed-off-by: NingX Zhao <ningx.zhao@intel.com>
Fix build step to enable CONFIG_COVERAGE_DUMP, otherwise
we won't get coverage data dump required for next step.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
It is possible, in case of two application images, to have no access
to one of devices of the secondary image.
When asserts are enabled, such situation causes crash even though the
image list command can handle it with no problem.
The commit removes the assert and adds additional swap type:
IMG_MGMT_SWAP_TYPE_UNKNOWN to indicate situations where it was
not possible to obtain swap type from boot_util.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit adds `extern "C"` to `timing.h` so that C function names do
not get mangled when including this header file from a C++ source file.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This reverts commit 619fce9e0f now that
the missing PRIuFAST32 and PRIxFAST32 macros are defined by the minimal
libc.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
