By popular demand, create a separate devicetree section, splitting it
apart from the "build/infrastructure" section.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove the empty EEPROM section. There are user-facing changes to the
EEPROM drivers/API for this release.
Fixes: #46213
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add release notes for disk drivers. Primary update since 3.0 was
addition of generic SDMMC disk driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is a follow-up to commit f5ffd05e6b.
Since twister removes leading spaces from received lines before
further processing, the regular expression for checking the output
produced by the sample cannot contain such space. Also negative
values read from ADC channels need to be allowed.
For consistency, remove the leading space also in the actual string
printed by the sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Make the build folder the place where MDB is run. Otherwise mdb
will store the .sc.project folder in the place where twister is
launched (so .sc.project folder will be shared across the runs)
For that we add **kwargs argument to popen_ignore_int method
so we can pass a cwd argument to the Popen constructor.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Fix#46112 introduced a regression regarding rx fifo length.
This fixes it so that the last byte is not placed in
wrong buffer index.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The commit adds release notes on MCUMGR transition from TinyCBOR
to zcbor, and deprecation of several Kconfig options that are
no longer needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit adds the sections describing how the dynamic memory
management is handled to the C language support and standard library
documentations.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The kernel documentation listed the memory management API pages under
two different sections: 'Kernel/Kernel Services' and
'Kernel/Memory Management' -- this creates unnecessary confusion and
makes it hard to look up all supported kernel memory management APIs.
This commit relocates the memory management API pages under
'Kernel/Kernel Services' to 'Kernel/Memory Management' so that all
memory management APIs provided by the kernel are described in one
unified section.
The link to the 'Kernel/Memory Management' index page is still left in
the 'Kernel Services' page because it may still be helpful to look at
it as part of the services provided by the Zephyr kernel -- it is just
more substantial than the rest and deserves more visibility.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit reworks the C++ language support documentation such that:
1. it contains more up-to-date information regarding the available
features.
2. it makes a clear distinction between the Zephyr C++ subsystem and
the C++ standard library and describe the functionalities they
provide.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit reworks the C language support documentation such that it
is more up to date and contains more information about the Newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the 'Language Support' sub-category under the
'Developing with Zephyr' category with programming language support-
related documentations.
The contents of the 'C standard library' page have been relocated to
the 'C Language Support' page, and the contents of the 'C++ Support for
Applications' page have been relocated to the 'C++ Language Support'
page.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a dedicated page for the Zephyr SDK under the
'Toolchains' sub-category under 'Developing with Zephyr'.
The content of this page is based on the Zephyr SDK installation
instruction from the 'Getting Started Guide'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds individual documentation page for each toolchain type
based on the content from the `3rd_party_x_compilers.rst` file in order
to improve visibility.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the 'Toolchains' sub-category under the 'Developing
with Zephyr' category with toolchain-related documentations that were
previously located under the 'Getting Started Guide' sub-category.
It also reworks the toolchain-related documentation in the "Beyond
Getting Started Guide" document such that it is more up to date and any
confusing and/or misleading details are removed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the "Install a Toolchain" section in the Getting
Started Guide to "Install Zephyr SDK" so that it reflects the actual
content of the section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Datagrams should either be fully sent or not sent at all if networking
buffers or network interface MTU does not allow that.
Verify that by trying to send MTU+1 bytes in case of IPv4 (as IP level
fragmentation is not implemented) and IPv6 (should fail when IPv6
fragmentation support is not enabled and succeed otherwise). In case of
IPv6 try to send "total number of network buffers + 1", so that even with
IPv6 fragmentation enabled requested datagram will not be sent. In all
tested cases when datagram is too big, check that ENOMEM error code is set.
NOTE: Tested behavior is not 100% compliant with Linux, as on Linux
EMSGSIZE error code is set when trying to send datagram bigger than MTU,
when manually disabling IP fragmentation (by setting IP_MTU_DISCOVER to
IP_PMTUDISC_DO). However, it is not trivial to implement such
behavior (EMSGSIZE error due to MTU) now and there is always a risk of
running out of buffers (and getting ENOMEM), so for now implemented tests
just assume the latter case to always happen.
Add 3rd testcase, which enables IPv6 fragmentation support, so that UDP
socket behavior can be tested in that context.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Datagrams should either be fully sent or not sent at all if networking
buffers or network interface MTU does not allow that. So far the behavior
was to truncate outgoing packets, even for datagram sockets.
When there is not enough available payload buffer to fit all requested
data, fail if that happens for datagram socket.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The gmtime() function returns a global result variable, and this
variable must be placed in the `z_libc_partition` when userspace is
enabled.
Since gmtime() makes use of a global variable and this results in a
footprint increase, this commit makes the time functions optional by
introducing `CONFIG_MINIMAL_LIBC_TIME` Kconfig and making them only
available when this option is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit globally defines the `Z_LIBC_DATA` macro, which is used to
place variables into the libc memory partition, so that it can be
re-used.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit introduces a new configuration called
`CONFIG_MINIMAL_LIBC_NON_REENTRANT_FUNCTIONS`, which enables the
traditional non-reentrant (i.e. not thread-safe) version of the C
standard library functions such as rand() and gmtime() when the
respective configs are enabled.
The non-reentrant functions make use of the globals and require an
additional memory partition (MPU region), which is scarce on low-end
devices, when CONFIG_USERSPACE=y.
The purpose of this option is to classify the MPU resource intensive
functions as a separate category and only enable them when there is a
demand for such.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `rand_r` function, which is a reentrant (i.e.
thread-safe) version of the `rand` function, such that a thread-safe
variant is always available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add rule based page hooks to allow to jump to
the respective rule in a webbrowser directly.
Example:
.../coding_guidelines/index.html#misrac-rule-2-2
Signed-off-by: Roman Kellner <rkellner@baumer.com>
This dependency it is not required since majoprity of platforms are
working with new pinctrl API. This drops the pinmux dependency.
Fixes#46091
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
A reproducible case to the behavior when during a connection
the link gets broken and all data is lost, the TCP connection
should properly terminate.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
At the end of DeviceHandler.handle(), the execution time
should be recorded no matter what the harness.state is.
This reflects how much time has been spent on the device.
And it is also used later to determine if a test has been
attempted on a real device or just build-only.
Signed-off-by: Ming Shao <ming.shao@intel.com>
This commit fixes the stale reference to the devicetree
`clock0@82005000` node, which was changed in the commit
7b601b7f50.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
error: 'CONFIG_BT_TBS_MAX_PROVIDER_NAME_LENGTH' undeclared (first use
in this function); did you mean
'CONFIG_BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH'?
292 | CONFIG_BT_TBS_MAX_PROVIDER_NAME_LENGTH);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| CONFIG_BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH
etc.
This fixes build errors that were seen while building call control
client without server side (`CONFIG_BT_TBS`) enabled.
The options like BT_TBS_CLIENT_MAX_URI_LENGTH and
BT_TBS_CLIENT_MAX_PROVIDER_NAME_LENGTH have been removed because those
were not used in the code. In fact the client implementation used the
common options for BT_TBS_MAX_URI_LENGTH and
BT_TBS_MAX_PROVIDER_NAME_LENGTH that were moved in this patch to the
common Kconfig section.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
There was a confusion on MB_MEMx definitions. Both MB_MEM1/2
should be located in SRAM1. Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To be able to accept DHCP discover/request incoming packets the ip stack
neeeds to accept unspecified src addr if the destination is broadcast
address.
Signed-off-by: Olof Winge <olof@skyshaper.net>
