Use consistent name for SPI HW block property so applications
using a device tree overlay work transparently.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Use consistent name for SPI HW block properties across Microchip
HW, so applications using a device tree overlay work
transparently.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This update updates the TraceRecorder module from version v4.6.0
(RC1) to v4.6.3. This update fixes some minor bugs where
deleted threads werent removed from the thread table. This
update is also in preparation for updates which changes
some trace hook arguments in Zephyr.
The update to v4.6.3 also improves syscall tracing by
including the id and name as parameters when logging
these events.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
If struct tx_structure is too large than the buffer that
expected_dut_to_host references, leading the compiler to generate a warning
about the possibility of buffer overflow.
Leave out the 'struct ec_response_too_big' so that 'struct tx_structure'
fits within the 256 byte buffer.
This was caught when using GCC 11.3.0 building the test for native_posix.
Signed-off-by: Keith Packard <keithp@keithp.com>
bt_dev.sent_cmd is unreferenced and assigned NULL within hci_cmd_done().
Calling net_buf_unref() again causes a null pointer dereference
Signed-off-by: Grant Ramsay <grant.ramsay@hotmail.com>
The codec (or rather codec configuration) is now taken from the
previously received BASE. This also means that the BASE (with
the codec configurations) is now also stored statically.
When the application attempts to synk to the broadcaster
the stack will lookup the codec configuration based on the
bis index, as a BASE may have multiple subgroups
with multiple codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the preprocessor constant ESP_MAX_DNS is defined as 0,
Coverity reports a condition that can never be true, and some
dead code as well. This also violates MISRA rules on dead code.
This is caused by this segment in drivers/wifi/esp_at/esp.h:
#if defined(CONFIG_WIFI_ESP_AT_DNS_USE)
#define ESP_MAX_DNS MIN(3, CONFIG_DNS_RESOLVER_MAX_SERVERS)
#else
#define ESP_MAX_DNS 0
#endif
Fix this by never setting ESP_MAX_DNS to 0, as is the currently
case. Define ESP_MAX_DNS only if it is configured through
CONFIG_WIFI_ESP_AT_DNS_USE and CONFIG_DNS_RESOLVER_MAX_SERVERS:
#if defined(CONFIG_WIFI_ESP_AT_DNS_USE)
#define ESP_MAX_DNS MIN(3, CONFIG_DNS_RESOLVER_MAX_SERVERS)
#endif
Since CONFIG_DNS_RESOLVER_MAX_SERVERS is 1 or greater, ESP_MAX_DNS
will always be greater than 0.
If, on the other hand, ESP_MAX_DNS is not defined, relevant
functions will be reduced to empty stubs, since in that case
they do not make sense.
There could be a cleaner solution to this, but this one is the
least intrusive (involves less code changes).
Coverity-CID: 219490
Coverity-CID: 219513
Coverity-CID: 219520
Coverity-CID: 219524
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
uart_async test and spi_loopback test require UART and SPI
with an ASYNC option.
The SAM0 UART/SPI driver requires configuring DMA support.
Arduino MKRZero is not DMA configured like other SAM0 boards.
We exclude it from the tests.
ea36f9b and f4c5bdf already exclude other SAM0 boards from these tests.
Arduino MKRZero also followed these PR policies.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
The Arduino MKR Zero board is SAMD21 development board.
It has microSD card slot and secure element.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Add MKR header connector that is implemented by Arduino MKR series.
This allows hardware with compatible headers to define the related GPIOs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
The shell module will now use BT_AUDIO_CONTEXT_TYPE_ANY
instead of BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED as that provides
a more flexible solution.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_BT_PAC_SNK or CONFIG_BT_PAC_SRC was not enabled, the
function would not build due to missing Kconfig
(CONFIG_BT_PACS_SNK_CONTEXT or CONFIG_BT_PACS_SRC_CONTEXT).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The HAS depends on the unicast server, and should be
disabled in the `no_unicast_server` as well as depend
on the CONFIG_BT_AUDIO_UNICAST_SERVER config.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some functions are only used for the unicast server
but was guarded by CONFIG_BT_AUDIO_UNICAST instead of
CONFIG_BT_AUDIO_UNICAST_SERVER.
Some parts of the unicast-server-only code also had
client specific code that would never be called.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using PACS and/or capabilities for
the broadcast sink role. PACS and capabilities were
originally only supported for the unicast server
role, so the PACS callbacks were moved their own
struct, as if a device supports both the unicast
server role and the broadcast sink role, it will
only have a single PACS instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If the number of CSIS instances on a device is
above 1, then each shall be included by another
service.
This creates a bit of a chicken and egg issue,
as we can't really register the "parant" service
before the CSIS instance has been registered,
and we thus can't verify if the parent service
pointer is actually another primary service on this
device. The best we can do is add the proper
type and a NULL check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add stress test for logging to validate that logging is coherent:
All message are processed by the logger or dropped and no message
is lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When system clock is set globally for the test which is executed
on various qemu platforms it may happen that clock is set too
high compared to CPU clock frequency. In that case test may stuck.
Added check and test skipping in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated log_core to use spin lock instead of irq_lock.
Refactored z_log_msg_post_finalize function.
Update thresholds in the log_stack test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The function used an assert if n was 0. Instead
of using an assert, the function will now just
not do anything. The documentation has also
been updated to reflect this.
The reasoning for this is that the strlcpy function
this (sort of) implements for utf8 works the same way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit changes fs_mount and fs_unmount to use node fs_mount_t
member to decide whether file system described by given fs_mount_t
object has already been mounted.
Previously there was no such check in case of fs_mount, which
would allow to remount the same object as long as mount path
has been changed.
The fs_unmount has been checking whether API pointer (fs) has been
filled now it checks whether fs_mount_t is linked anywhere,
which is sign that the object is used.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
It is assumed the user will use the VCOM port by default, making the
serial port available to the host PC over USB or Ethernet, instead of
using an external serial adapter.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Some EFR32 SoCs use a secure element subsystem to manage
security features (i.e., TRNG, secure bootloader or cryptographic
functions).
This driver relies on the SE Manager high-level API provided by Silicon
Labs. The API interacts with the SE subsystem, provides helper functions
to achieve cryptographic operations and ensures that only one operation
is running at a time by using mutexes and semaphores.
Instead of relying on the SE Manager from Silicon Labs, one could
recreate the behaviour of the Manager and put the code in the crypto
driver folder and create a dependency for other drivers using the crypto
manager (e.g., keys, entropy).
I went for the SE Manager API as it is already there and supported by
Silicon Labs.
Tested using the random subsystem.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Changes:
- Copied over board files for blackpill_f401ce
- Changed appropriate soc dtsi from stm32f401Xe.dtsi to stm32f401Xc.dtsi
- Replaced any instance of F401CE to F401CC
- Added blackpill_401cc to adc test
In essense the blackpill_f401ce and blackpill_f401cc are the exact
same boards,
the f401cc variant of the stm32 mcu has lesser sram and flash than
the f401ce.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Add disk performance test, to report performance of disk devices. This
test reports performance for single sector R/W, sequential read/writes,
and an IOPS score based on random 512 byte reads and writes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rename disk driver test to disk_access, as multiple disk tests exist.
Disk access test is intended to verify disk functionality.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add the stm32g0 bindings for the HSISYS to be used with the hsi divisor
with a factor programmable from 1 to 128.
Signed-off-by: TLIG Dhaou <dhaou.tlig-ext@st.com>
