The definition of the octospi clock source is given
by the DTS node. The default value selects the sysclk
(not pclk) for the alternate clock control.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The definition of the clock source for the 2 octospi
instances is given by the DTS node.
The default value selects the sysclk (not pclk)
for the alternate clock control.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The clock of the octospi peripheral is directly defined
by the DTS and configured by the clock_control_on function.
No specific stm32cube function is required then.
The clock control is taking this clock source to calculate
the clock rate.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
lwm2m: Regenerate lwm2m_senml code from the CDDL description.
Reapply manual changes.
Create a sh script to perform the regeneration.
tests: zcbor_bulk: Adapt to zcbor 0.5.1
zcbor_new_decode_state() now has no return value.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Move from using Kconfig NET_PPP_UART_NAME to a devicetree chosen
property ("zephyr,ppp-uart"). This is similar to a number of other
functions like "zephyr,shell-uart" or "zephyr,bt-uart".
As part of this we rework the init code a little to use
DEVICE_DT_GET for the modem gsm-ppp case.
Signed-off-by: Kumar Gala <galak@kernel.org>
Rather than using a devicetree node label, utilize the driver
compat and thus DT_INST which is standard means for most drivers.
Signed-off-by: Kumar Gala <galak@kernel.org>
Rather than stating a version information that will get out of date
at each release, refer to the source of information located in hal_stm32
module.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Don't fail to compile when `fixed-partition`'s exist on a flash device
that is disabled. This does not fix the case where a `fixed-partition`
is on a flash device with `status = "okay"` but with no driver compiled
in.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
There is a build warning of unused `adc_stm32_oversampling_ratioshift`
function: [-Werror=unused-function]. This makes twister fail, as all
warnings are treated as errors.
Fix that by ifndef'ing adc_stm32_oversampling_ratioshift().
Fixes: c57a41c5d2 ("drivers/adc: stm32: do not disable the ADC if
resolution is unchanged")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This is really useful only for one case i.e. when testing against zero.
Do that test inline where it is needed and make the rest of the code
independent from the actual numerical value being tested to make code
maintenance easier if/when new cases are added.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
As we work to phase out devicetree 'label' properties, convert
driver to just use sx126x instead of DT_INST_LABEL for logging
purposes.
Signed-off-by: Kumar Gala <galak@kernel.org>
Close the flash_area at the end of individual tests to demonstrate
correct usage of the API.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove all usage of `device_get_binding` in the subsys by directly
storing the `const struct device*` in the `struct flash_area`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This is just a stub with bits of information about RISC-V support on
Zephyr, that can and should be improved over time.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Move the `REQUIRES_FULL_LIBC` dependency from `config LORA` to
`config LORAWAN`. The commit that added the `select` (f590d4fa) mentions
that this is required by `loramac-node`, which is only used by LoRaWAN,
not the base LoRa code.
This results in small FLASH savings when compiling the samples, but can
result in larger savings in more complex applications:
```
// With REQUIRES_FULL_LIBC
west build -b 96b_wistrio zephyr/samples/drivers/lora/send/
[162/162] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 37708 B 128 KB 28.77%
SRAM: 8832 B 32 KB 26.95%
IDT_LIST: 0 GB 2 KB 0.00%
// Without REQUIRES_FULL_LIBC
[181/181] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 37444 B 128 KB 28.57%
SRAM: 8832 B 32 KB 26.95%
IDT_LIST: 0 GB 2 KB 0.00%
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Change logic in `modem_cmd_handler_setup_cmds` and
`modem_cmd_handler_setup_cmds_nolock` to always sleep
after each sent AT command.
The issue was found using a logic analyzer while debugging 'NO CARRIER'
from a BG95 modem while being in data mode.
The reason 'NO CARRIER' occured was due to crosstalk to DTR which
terminated data mode.
The logic analyzer also revealed that without the delay the next AT
command is sent before the whole 'OK\r\n' is received. This is not
addressed in this commit.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/47082
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add early returns from functions which are not used when
there is only one frontend in the system (no backends). This
allows to significantly reduce logging code size in that
configuration.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to mbedTLS' Changelog "Mbed TLS 3.0.0 branch released
2021-07-07" -> "Removals":
MBEDTLS_ECP_MAX_BITS is no longer a configuration option because it
is now determined automatically based on supported curves.
Hence remove MBEDTLS_ECP_MAX_BITS from configuration files to fix build
issues with Zephyr when there is unfortunate order of include
statements.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Some drivers may not support simultaneous input-output
configuration or disconnect.
In such cases, the driver should return `-ENOTSUP` and the
test should be skipped.
Fixes#46917
Signed-off-by: Christopher Friedt <cfriedt@fb.com>
Keep the cavstwist.sh it is still working by specifying an
environment variable when CAVS_OLD_FLASHER is set. Provide
a fallback once the client-server-based tool does not work
well in some conditions.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
The magn_polling sample application now supports the hmc5883l driver, so
we can remove this driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The magn_polling sample application now supports the bmm150 driver, so
we can remove this driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
