Adds support for building the external_lib sample application on a
windows host operating system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The test was broken by changes made in
9d175ca5f1 (device ready check was
commented before). Also removed redundant preconditions check, since it
is already done in the test.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Drop the async enable function. This feature is rarely/never used,
complicates driver design, and doesn't really follow the sync/async API
design/naming used in other areas. In the future we can introduce
regulator_enable_async if needed, with support from the driver class (no
onoff). Note that drivers like PCA9420 did not implement any
asynchronous behavior. regulator-fixed implemented in the past
asynchronous behavior using work queues, an overkill for most GPIO
driven regulators. Let's keep things simple for now and extend the API
when needed, based on specific usecases.
In the current implementation, reference counting is managed by the
driver class. \isr-ok attribute is dropped, since calls are potentially
blocking. Note that drivers like PCA9420 already violated such rule.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove conditionnal declaration of `bt_tbs_dbg_print_calls` in
`subsys/bluetooth/audio/tbs.h` so the function still exist even if the
debug is not enabled.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Update the Bluetooth specific Kconfig legacy log template to use the new
log inheriting template.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The --snr (nrfjprog) --id (jlink) and --board-id (pyocd) options were
deprecated a long time ago in favor of --dev-id. It is time to remove
them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When MCUBoot is enabled, IRAM region needs to be set
to a smaller value to avoid overlapping. This shall be re-worked
when MCUboot build for ESP32 is performed in Zephyr environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not set wifi optimizations by default in order
to free up IRAM room region. In case higher throutput
is necessary, one can enable this flags to optmize it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The Bluetooth spec states that a K-frame exceeding the device's MPS
should trigger a disconnection of the channel.
Fixes two PTS tests that verify this behavior:
L2CAP/LE/CFC/BV-27-C
L2CAP/ECFC/BV-34-C
The current behavior is a silent truncation, which is not very nice for
the user, even if the spec would allow it.
Fixes#52228 and #51174.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Unit test project for bt_keys_find_addr().
This part of subsys/bluetooth/host/keys.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Enable counter_basic_api test for s32z270dc2_r52 boards, using
System Timer counter instances with different prescaler values.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Enable counter alarm sample on s32z270dc2_r52 boards, using the first
System Timer Module instance.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Enable RTU System Timer Module (STM) instances on
s32z270dc2_r52 boards. Module clock frequency is fixed to
133.333333 MHz.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
NXP S32 System Timer module includes a 32-bit count-up timer and four
32-bit compare channels with a separate interrupt source for each
channel. The timer is driven by the module clock divided by an 8-bit
prescale value.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Add a hidden Kconfig option to select the index of the target RTU
(Real-Time Unit) subsystem. This index can be used by peripheral
drivers, for example, to know the peripheral instance index since the
HAL is index-based.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Microchip XEC GPIO pins support inverting the output of
alternate pin functions. This feature may be useful for
those peripherals that do not implement output inversion
in the peripheral. GPIO control register pad input and
parallel input register values are not affected by the
function output invert feature. GPIO interrupt detection
of an output is inverted if the invert polarity is enabled.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Added a missing SDK function POWER_PowerInit
to the clock_init function of the soc in lpc55S36.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
When configuring an LPSPI module for a new device with different baud rate,
the module needs to be disabled for the baud rate change to take effect.
This adds the necessary call to LPSPI_Enable before initializing the
module.
Fixes#51177
Signed-off-by: Jonas Otto <jonas@jonasotto.com>
This casts the char * buffers to void * before giving them to the
LOG_DBG function to fix a warning at runtime.
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
add Intel HDA DAI driver
Long device list in dtsi needs to be refactored in the future
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Remapping by default can confuse things that dynamically manage RAM,
such as newlib heap - since unused memory will be powered off by
default. So this patch shields this behaviour behind a non-default
Kconfig.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This commit calculate memory footprint from build.log and
proposes an alternative approach to #2465.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When MCC disconnected, it would memset the entire instance.
This causes issues, because the subscription parameters
would also be memset, causing the `notify` callback to
be set to NULL. If this was done as part of a disconnect,
the GATT layer would attempt to call the notify callback
as part of cleaning up the ACL, but if the callback was
set to NULL (from the memset) this caused a fatal error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
pca9420_i2c.h has neem remamed to pca9420.h (device only has I2C, so
it's kind of redundant to have i2c in the header name).
pmic_i2c.h was again not generic but designed specifically for PCA9420.
All its macros have been renamed, s/PMIC/PCA9420, and moved to the
pca9420.h header.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Store all common configuration settings in the parent device. This
change should save ROM, since it avoids duplication.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The driver had a conceptual issue regarding current limitation. PCA9420
is able to limit the current flowing through VIN, ie input current. This
is a global setting, not individual to each regulator. This patch
creates a new DT property: nxp,vin-ilim-microamp to specify such limit.
It is applied when the device is initialized.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Voltage ranges were hardcoded in Devicetree, however, things can be
significantly simplified by using the recently introduce linear ranges
API. All values are now computed using information stored in the driver,
so there is no need to store any lookup table in ROM. Code should now
both be faster in average and consume less ROM.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Maximum current was not specified. Even though not used, yet, it is a
valuable information. Values taken from PCA9420 datasheet, Figure 1
"Simplified block diagram".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Regulator registers were set for each BUCK/LDO in DT, likely because of
the way the devices were instantiated. When using a generic iterator,
ie, DT_INST_FOREACH_CHILD, there's no way to differentiate the child
being _parsed_. Since instantiation happens now based on child node
names, we are able to know which registers each devices gets assigned at
the driver level. This greatly simplifies Devicetree, and it actually
removes information that is not strictly hardware description from it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
