This macro is not used anymore and is strictly a leftover, which should be
removed as part of commit 55be783c85 ("settings: Remove deprecated
SETTINGS_USE_BASE64 support").
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Put all options under one `if SETTINGS` block, so that `depends on
SETTINGS` does not need to be repeated every time.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add support for regulator mode related APIs to regulator shell, so that
the user can select new operation modes for the regulator and configure
target voltages
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Cleanup regulator shell to use strtol() over atoi(), as strtol features
error detection. Remove device_is_ready() checks, and replace them with
NULL checks as device_get_binding() calls device_is_ready() interally
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Add `gpio_is_ready_dt` function that validates GPIO DT spec port
is ready and it allows the user to pass `gpio_dt_spec` directly.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Update the relevant tests in basicmath to use the dsp subsystem. Note
that f16 is not updated since it's much more architecture specific and
did not become a part of zdsp.
Signed-off-by: Yuval Peress <peress@google.com>
Introduce an API mirroring the CMSIS-DSP's basicmath. If CMSIS_DSP is
enabled, then it will by default be used as a backend. Developers may
opt into a custom backend by setting CONFIG_DSP_BACKEND_CMSIS=n. If
done, the application must provide `zdsp_backend/dsp.h` and optionally
implement the functions in its own .c files.
Signed-off-by: Yuval Peress <peress@google.com>
The I2C API already provides APIs to read/modify registers, so there is
no need to provide custom wrappers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This changes the minimal logging Kconfig to select printk rather
than imply it, this is because if someone turns printk off,
minimal footprint logging does not work, therefore it needs to be
a requirement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Rather than exposing shell commands that take an opcode and
an optional parameter, the shell commands are now explicit
so that it is easier for a person to use the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Replace Enjia with Johan for x86 platform maintenance, and add Tomasz as
collaborator for x86 platforms & arch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
path for posix was not being matched correctly due to a missing /. So
some posix tests were excluded and not excercised.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add experimental CDC ACM implementation for new USB device stack.
It currently implements only UART IRQ API support and is WIP.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The device supprt brings support for multiple stack instances,
multiple configuration, asynchronous transfer model, ability to
change most of the properties of a device at runtime and
the composition of configuration and classes at runtime.
The stack requires new UDC driver API and is not compatible
with old driver API (usb_dc_). The classes (functions) of old
(current) USB device stack cannot be used with new ones and must
be ported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Simple test for API rules, allocation, queue, and dequeu
of the endpoint requests. USB device controller should not be
connected to the host as this state is not covered by this test.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Expand ifdef by adding new Kconfig option UDC_KINETIS as
preparation for USBFSOTG UDC driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HAL events were also used for the shim driver's concerns
during the prototyping of API. Fix it now and use specific
shim driver events. That also allows new transfers to be
triggered from a single point.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add new USB device controller API and nRF USBD controller driver.
The new UDC API brings support for multiple instances and asynchronous
transfer model, transfers use net_buf and store methadata in the
user data area.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add macros to get endpoint address, direction, and attributes.
Remove identical endpoint macros from usb_dc header.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add RX and TX fifo size properties to CDC ACM UART bindings.
This allows per instance settings in contrast to Kconfig
USB_CDC_ACM_RINGBUF_SIZE option. New properties takes the default
size value of USB_CDC_ACM_RINGBUF_SIZE which can be removed
subsequently.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commits extracts mesh, gat, gap, l2cap from
bttester.h into corresponding header files for
better readability.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Set the inverted value of pixel format setting in MADCTL register to
current_pixel_format in display capabilities structure
if rgb-is-inverted enabled.
This make enables support for a module that mismatches the RGB setting
in the MADCTL register and the actual display color format.
(Such as Longan Nano built-in LCD module.)
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add rgb-is-inverted option to indicate module's pixel-format is
inverting from MADCTL settings of ST7735R controller.
This option intends to implement a workaround for LCD modules
that is the actual screen color was different (inverted)
from the RGB setting in MADCTL property.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The `audio connect` shell command did not really do
anything anymore, and has thus been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the unicast audio shell commands were guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT and only usable by the client.
This moves some of the commands to a CONFIG_BT_AUDIO_UNICAST
guard instead, so that they are usable for builds with just
the server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sample program demonstrating the LED driver for Microchip's
XEC microcontrollers. The sample can be built for MEC152x and
MEC172x.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Implement a LED driver for Microchip XEC using the breathing,
blinking LED controller. The driver supports LED on, off, and
blink API's. The BBLED block uses the 32768 Hz clock domain
allowing the module to operate in light and deep sleep states.
Blink frequency is 32768 divided by 256 * (prescale + 1) where
prescale is a 12-bit value. Duty cycle is specified by an 8-bit
value where 0 = full off, 127 is 50%, and 255 is full on.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
When dealing with groups, the specified window in
linear_range_group_get_win_index can span across multiple groups. In the
current implementation, if maximum value was not in the same sub-window
as the minimum value the function would return -EINVAL. This patch fixes
the problem and updates test cases to cover such scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add clarification about the representation of the data
in the buffer of a multi-channel ADC sequence.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add new variant configuration of it81202cx and it81302cx.
This cx variant of it81xx2 changes are as follows:
1. SRAM size will increase from 60k to 128k.
2. Configurable ILM size is still 60k.
3. Support M extension of RISC-V.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The OSPI flash driver expects size in bits.
Use bits instead of bytes for the size.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
