The PCA9420 dt-bindings include file defines all device registers, but
many of them are not used (e.g. battery charger). It is also not the way
to use register definitions. Devicetree is about hardware description
after all. File will be cleaned up in subsequent commits.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Right now the PCA9420 driver instantiates by iterating over all
children. This is somewhat problematic, for a few reasons:
- Since instantiation is generic code, we're forced to put internal
details on Devicetree, e.g. reg-masks. After this change, this will no
longer be necessary.
- We take all children, regardless of what is defined in DT.
While we have no means to validate Devicetree node names as in Linux
dtschema, this approach allows us to have per-child specific
initialization code. This is somewhat similar to the Linux approach.
Note: nodelabels have been removed, since they were not used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
DT_PROP() will evaluate to 0 when a boolean property is missing, so
there is no need to use DT_PROP_OR(..., false). Using _OR also has
side-effects, such as no errors when property is not defined in the
bindings.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
regulator-allowed-modes/regulator-initial-mode are standard properties
defined in regulator.yaml, so use them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Import all Linux properties, so that we can maximize compatiblity with
upstream bindings.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Following Linux regulator.yaml, regulator-name is a common property for
all regulators.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- voltage/current needs to be stored using int32_t
- reg_val is a 8-bit unsigned register value
- Also removed __packet, it is not required here
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename some internal structures/functions to clearly indicate they
belong to the PCA9420 driver.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Constify configuration and curr. limits/voltage range/modes arrays
- Use common argument names: node_id, inst to make code more readable
- Improve macro names to make things clear
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align test to accomodate for a change that LOG_PRITNK is by default
enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If LOG_PRINTK is used then the buffer size needs to be larger to
account for the additional header/footer output from the shell.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add section which describes coexistence of printk and logging
and the behavior of LOG_PRINTK with information that it is by
default enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This change will enable the logging system to handle printk() calls by
default if printk support is enabled, which improves output resiliency
when logging, mcumgr and printk calls are used. Will disable keep
LOG_PRINTK disabled for tests which are not using the new API as
moving to LOG_PRINTK causes test data to be output to a different UART
in the old test system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This adds the support jedec configuration to run
the jedec sample application. So target boards can display
the content of the octo-NOR flash
of the stm32u585 and stm32l562 or stm32h735 disco boards.
The sfdp-bfp table is provided as example (overlay file),
to run this sample on the stm32l562e_dk platform.
It has to be defined in the deviceTree "in cases were runtime
retrieval of SFDP data is not desired."
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Activates the NOR octoflash MX25r6435f present on the disco kit
b_l4s5i_iot02a from STMicroelectronics.
The connection is made through the OSPIM peripheral for the
octospi1 pins.
QUAD spi mode is selected but SPI or DUAL are also supported.
SPI Max freq is given by the datasheet
and is compatible with Voltage Range 2.
DMAMUX is used for ospi transfer on request 40.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define the octospi node for the stm32l4plus MCUs from
STMicroelectronics.
It is controlled by a OSPIMgr in front of each peripheral.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adaptation of the ospi nor flash driver for stm32l4 plus
where the peripheral is slighty different.
Configure the OSPIM peripheral for mcu embeddingthis peripheral
in front their octospi instances.
Add LOG for read access command like for write access.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Logging supports printing 64-bit values now. Cast to unsigned long and
use %lu all times.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Unlocking CR at the end of initialization was added in commit
a9183cd518. It was probably copied
from previous flash driver implementation.
Unlocking and locking CR in write and erase functions was added in
commit 6e4cdb0c99. Since we always unlock
the register before writing or erasing, and lock it after the operation
is finished, there is no need to unlock it after initialization.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
When reporting a receive state to the upper layers, the broadcast
assistant should report NULL if there is not a receive state
active. The "activeness" of a receive state is determined by
the length of the characteristic - If it is 0 then there
is no receive state active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Put L2C init level in pre_kernel_2 to wait for syscon driver
- Check if SMU exists when preprocessing
Signed-off-by: Wei-Tai Lee <wtlee@andestech.com>
Improve alignment in the source code and limit printed messages
(SYSTEM_CLOCK_NO_WAIT and SYSTEM_CLOCK_WAIT_FOR_* are choice options,
so it is enough to print only the enabled one).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This test needs an initialization step to be done soon after the system
clock is started. ZTEST setup function is too late for that, so use an
initialization function executed at the POST_KERNEL stage instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As we start to use _st32_huge_offset in other places (i.e DSP code)
introduce optimized version with address shifted instruction which
doesn't produce extra instruction.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently we try to manually specify C/C++ headers locations
with -isystem flag which lead to issues with "include_next"
directive which is used in C/C++ headers. As advised by MWDT
R&D team let's rely on the default C/C++ include locations
which are provided by MWDT if we do build with MW C / C++
libraries. For that case we still need to manually specify
header directory to ASM builds which bay use 'stdbool.h'
In case of building with minimal libc (provided by Zephyr)
we rely on minimal libc headers and manually specify
toolchain's C header directory (as minimal libc still uses some
toolchain's C headers.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
There are several Zephyr shell commands that are used for
transferring data over a possibly unreliable connection such as a
UART into either memory or flash. For example, `flash load` and
`devmem load`.
Make the CRC functions available so that they can be used to
verify the integrity of data transferred over possibly
unreliable connections.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Rather than hard-coding calls to each individual CRC function, it
may be more convenient to specify the crc algorithm to use
parametrically.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Some missing features for getting coverage data for unit tests:
- Setting the unit_testing board to have coverage support and native
application.
- Fixing the CONFIG_COVERAGE check
Signed-off-by: Yuval Peress <peress@google.com>
non-simulation platforms set key to 'na', we need to check for that
instead of just checking for existance of key.
Fixes#52595
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added 3 helper methods for async calls as they exist for
the blocking implementation
Signed-off-by: Hernan I. Gutierrez-Vazquez <quic_hernang@quicinc.com>
The random MPU faults experienced before were actually caused by a too
small system work queue stack for LoRaWAN in a custom application.
PR #52550 adds a compile-time check to avoid such issues in the future.
Signed-off-by: Martin Jäger <martin@libre.solar>
Control shared interrupts enabling/disabling via IDU.
With that we can easily enable and disable them for all cores
in one place.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make ARC_MP_PRIMARY_CPU_ID definition public so it can be used in
other ARC code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
