This commit adds new API functions for AICS
Setting automatic/manual only gain modes
Setting mute disabled
Use new functions in btp.vcp
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add LEDC device for esp32s3
Update PWM LED binding
Remove invalid comment from driver source file
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Revert commit 44628735b8
This commit broke the ability for nxp rt series to
reset except with power cycle
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add all boards where the required overlay is present in the boards
folder to platform_allow. At the same time sort the list alphabetically
to keep a better overview.
Signed-off-by: Martin Jäger <martin@libre.solar>
The platform_allow selector is deleted, such that CI is run for all
boards tagged with dac support.
The board-specific defines had to be fixed/amended.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add the dac tag as supported peripheral for boards where the DAC
was defined in devicetree, but not marked as supported.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add the dac tag as supported peripheral for boards where the DAC
was defined in devicetree, but not marked as supported.
Signed-off-by: Martin Jäger <martin@libre.solar>
Adds a device pm_toggle shell command which calls pm_runtime_device
functions put and get to toggle the runtime power state.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add support for device runtime power management. When suspended sampling
is suspended. When active sampling resumes at the configured rate.
When suspended fetch/get will return an errno and 0'ed out samples.
By default the device will start in a suspended state when
PM_DEVICE_RUNTIME is enabled.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The building sensor shield has several useful sensors including a 6 axis
inertial sensor, 3 axis magnetometer, optical light sensor, temperature and
humidity sensor, and connectors for offboard temperature sensors.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In the intel_adsp_wdt_isr function was an unused dev_config variable.
The variable was removed. This was caught by the sof CI.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
If for any reason the timer counter didn't hold a value close enough to
zero on boot then the cycle delta could overflow and the reported ticks
won't be right. Those who really want the hardware uptime where this
makes sense (as opposed to Zephyr's uptime) can still rely on
sys_clock_cycle_get_64().
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
SMP tests `inc_concurrency` and `smp_switch_torture` use a 'stressing'
approach to verify their results: run something for some time (or some
number of repetitions). However, in some environments, current 'stress'
levels can be quite high, making tests take a long time - environments
like emulators/simulators.
This patch adds a Kconfig that allows one to define a percentage factor
to the 'stress' (time or repetitions) used by these tests.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Added UART instances and changes to enabled
support for PCIe UART instances.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Enabled simultaneous support by adding a DTS variable named “io-mapped”.
There are 3 possibilities through instance in dtsi file.
Under PCIe, PCIe ns16550.
Under soc and has a variable io-mapped, legacy(IO mapped).
Under soc and don’t have a variable io-mapped, MMIO mapped.
Simultaneous access can be enabled by a Kconfig.
For PCIe instances UART initialization should be done post-kernel as it
depends on PCIe initialization.
Co-authored-by: Najumon BA <najumon.ba@intel.com>
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
All examples in the header showcase the use of the type int in
structs that values should be parsed into (or serialized out of).
However, that is probably a bad idea if we consider the function
get_elem_size in the JSON library that calculates the field size:
static ptrdiff_t get_elem_size(const struct json_obj_descr *descr)
{
switch (descr->type) {
case JSON_TOK_NUMBER:
return sizeof(int32_t);
...
}
Hence, using int in structs on platforms where an int is not 32
bits wide (as rare as they may be) is probably a bad idea and will
lead to confusing errors and undefined behavior.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
Some peripheral tests are failing if CONFIG_BT_EXT_ADV=n.
That was previously implicitly enabled by MESH but it has
dedicated overlay.
Affected tests:
GAP/BROB/BCST/BV-03-C
GAP/CONN/UCON/BV-06-C
GAP/PRIV/CONN/BV-10-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds ASE_ID getter function to be used in the tests. The function
performs read operation on ASE charateristic. The characteristic value
is ensured to be ASE Idle state characterisitic value, which carries
information about ASE_ID value.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This refactors the function used to get the ASE for the tests.
Reworked function allows to get several ASE's for the test with a single
function call.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This cleans up the code by moving the ASE State Machine transition
test cases to separate source file.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In some cases built binary files have different names than "zephyr.hex"
files, and for those cases, information about names of file to keep
should be taken from runners.yaml file.
Moreover if in runners.yaml file exist absolute files paths to binary
files, then they should be changed to relative ones.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add plli2s node to dts/overlay file for boards that already use I2S.
Remove old I2S Kconfig not used anymore
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Split STM32 device clock configuration file so that each driver has its
own tests in its own file
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
