This commit marks testcases that require working Power Managament with
the appropriate `pm` tag to allow proper testcase filtering in the board
YAML file.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Increase timeout for tests/lib/mpsc_pbuf/libraries.mpsc_pbuf_concurrent
as it fails sometimes on the 60 sec. default timeout.
Fixes#56349
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Adds details on the update fs_mgmt features for faster
uploads/downloads and new Kconfig entries added.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds information on updated fs_mgmt functionality and describes
the new optional file close command.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This vastly increases the performance of file transfers using the
fs_mgmt group over MCUmgr by allowing the file handle to remain open
between commands instead of having to open, feek, read/write then
close the file handle for each invocation.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds "fragment" to the Kconfig text, this is because these files
are known as Kconfig fragments, and when searching the
documentation for this, all you get are irrelevant results instead
of this page - which is by far the most important one.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add optional filter value properties. The filter is disabled by default
but can be enabled by setting the filter-sample-period > 0 in the dts
file. A latency is introduced if the filter is enabled. The latency can
be printed by setting sensor log level to debug.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Fix inconsistency between compile-time and runtime check on
counts_per_revolution. Add macro to simplify compile-time prop value
checks.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
There was a bug in the BLE backend when it was the only enabled
backend. Instead of using the API `log_backend_activate` to
activate the backend, the logger requires the first time to be
enabled with `log_backend_enable`.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
This commit removes the possible race condition when notifying
the bonding request.
When the race condition appears there is possibility that
one of the cores would never send notification for bonding.
This change makes it sure that the notification would be sent
at least once.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
If canonical zephyr base is already ended by trailing slash, then it
should not be added redundantly.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Convert the ft5336 to the input subsystem, fix all the config in the
repository and add the Kscan compatibility driver to the current dts
driver instances.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
All we really want here is to set default parameters. However
k_sched_time_slice_set() also calls z_reset_time_slice(_current)
which expects `_current` to be fully initialized.
Simply initialize `slice_ticks` and `slice_max_prio` with default values
directly. Unfortunately the compiler isn't smart enough to expand
k_ms_to_ticks_ceil32(CONFIG_TIMESLICE_SIZE) to a constant expression
at build time so we must do the conversion by hand (and it shouldn't
overflow due to the nature of the value).
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Slice expirations are now based on the same timeout mechanism as
regular timers which have been recently fixed and proven to work with
single-tick periods.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add build-only test case for multifunction devices and
add support for NXP's SC18IM704 UART to I2C/GPIO bridge.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The reason for arch_num_cpus() is to be able to dynamically adapt to
the actual number of available CPUs at run time.
In the z_sched_init() case, it is not the number of active CPUs that
we need but rather the total number of potential CPUs, and that is
represented by CONFIG_MP_MAX_NUM_CPUS not arch_num_cpus().
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit implements the temperature sensor interface for
the Maxim MAX31865 SPI Temperature Sensor.
Signed-off-by: Fin Maaß <fin.maass@haw-hamburg.de>
Co-authored-by: Armin Brauns <armin.brauns@embedded-solutions.at>
- replace device_get_binding() calls that were searching for no longer
existing I2S device labels with proper DEVICE_DT_GET_OR_NULL() calls
- move initialization of I2S devices that was previously performed
in the test cases that were executed as first (what is no longer
valid after moving to the new ztest API) to functions that are called
before running each test in a given test suite
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add DT aliases that specify I2S devices to be used in the test.
Add new overlays as in fdad738cff
and modify existing ones accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... so that it is not needed to provide a .conf file for every board
based on an nRF SoC that features I2S.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Follow-up to commit 7f1f2385d2.
For consistency with the i2s_api test, use the default logging
settings.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add the term 'SBS' in atRate properties and Battery mode property name,
as they are specific to SBS
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Remove CTS/RTS LPUART pin definitions, as these aren't exposed through
the UEXT1 connector with their accompanying Tx/Rx lines, but are available
separately as GPIO pins on the CON1 pin header.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
Add configuration and DT overlays for new devkit revisions C and D.
This enables identical behavior to earlier revisions by powering the VDDIO
pins on the UEXT1 connector and CON1 header via the new FET2 regulator.
In these new revisons this regulator is also user-togglable.
Update documentation build/flash/debug steps.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
There is no requirement that HRS shall be on a peripheral device
as far as I can tell, and as such the device with HRS may not
be a GAP Broadcaster. Guards the advertising with
CONFIG_BT_BROADCASTER.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Setting the same callback with the same data as is already configured
should not cause an error.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Added a new logger backend to recieve data over a BLE
notification characteristic.
The characteristic is based on the UUID from the Nordic connect SDK
service NUS, which allows to have a UART shell over BLE.
The idea behind this, is that this logger can be used directly
with the NRF apps or any other BLE UART terminal app.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
LNL uses MM_DRV_INTEL_ADSP_MTL_TLB to save / restore context.
This is exactly the same like on MTL. Enable PM for ACE 2.0 then.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Sort SoC nodes by address to make it easier to find them. As part
of this also move the intel-sha node under SoC where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
In ACE 2.0 platform (LNL) ssp got new shim registers.
SSP driver need to program them to configure the interface.
This patch adds new shims to device tree.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
As the power domain nodes don't represent something accessible via
a MMIO register move those under the lps node to address warnings
generated when building the DTS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
LNL platform is ACE 2.0 series with changes in shim registers and HW
features. Initial definition replicates MTL as much as possible, however
it will vary after enabling LNL platform.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds definition of ACE 2.0 Lunar Lake board.board.
Signed-off-by: Krzysztof Frydryk <Krzysztofx.Frydryk@intel.com>
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
