* Move definition of flexspi_nor_config_t into soc/ dir so it can
be shared by all i.MX RT based boards.
* Use Kconfig symbol CONFIG_NXP_IMX_RT_BOOT_HEADER instead of
HAL define (which is set based on the Kconfig symbol)
* Rename board files to flexspi_nor_config.c since they
are already namespaced by the board dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes an issue that surfaced with Zephyr v2.6.0,
where the GPIO driver has not completed initialization
when attempting to use it during POST_KERNEL with
KERNEL_INIT_PRIORITY_DEFAULT.
Signed-off-by: Alex Tsamakos <alex@actinius.com>
When building tests/drivers/build_all/modem on native_posix_64 we get:
modem_cmd_handler.c:545:9: error: ret may be used
uninitialized in this function
[-Werror=maybe-uninitialized]
Fix by adding simple initialization of ret = 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make correction on the terms "intput" appearing
in sciripts/pylib/twister/twisterlib.py to "input" for all.
This type of misspellings may cause another unnoticeable misspellings,
when propagated by code completions.
(assuming that the "intput" was intended
to have the opposite meaning of "output",
which also appear on the same areas)
Signed-off-by: Kentaro Sugimoto <tarotene@gmail.com>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The Texas Instruments TCA9538 is an 8 pin GPIO port expander.
It operates on an I2C bus with 2 configurable address pins. The
device has an interrupt output pin that is asserted when any pin
configured as an input changes state.
Added under the PCA953X name to allow other similar parts to
use the same driver.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
The local function has been missing static specifier.
The commit also removes unused STORAGE_MGMT_ID_ERASE define.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
We cache the current thread ID in a thread-local variable
at thread entry, and have k_current_get() return that,
eliminating system call overhead for this API.
DL: changed _current to use z_current_get() as it is
being used during boot where TLS is not available.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The TLS global pointer is only set during context switch.
So for the first switch to main thread, the TLS pointer
is NULL which would cause access violation when trying
to access any thread local variables in main thread.
Fix it by setting it before going into main thread.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
After powering-on the sensor, and before every measurement, it loads
the NMV. We must wait until this process is completed otherwise
we will read weird values.
Since it was observed that the time may be a bit long after a cold
start, it is more convinient to just wait until the sensor iready,
without a timout.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
To ensure that we have the same behaviour with a power cycle
and by pressing the reset button, we can perform soft reset
in `bme280_chip_init()`.
Signed-off-by: Efrain Calderon <efrain.calderon@aquarobur.com>
In the current code the naming of the
CONFIG_RPMSG_MULTI_INSTANCE_?_IPM_{TX,RX}_NAME symbol is 1-based. While
this is not currently an issue, it could easily become such if the
symbol is programmatically used as part of a preprocessor enumeration
(for example when using DT_INST_FOREACH_STATUS_OKAY(...) & co).
To avoid trouble, just make the index starting from 0 instead than 1.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a sample that shows how to use in Zephyr nRF peripherals that
share the same ID and base address. Such peripherals cannot be used
simultaneously, but it is possible to switch between them. However,
currently it is not possible with Zephyr APIs, only using nrfx drivers
directly. This sample shows how to realize such switching for selected
peripheral instances while using standard Zephyr drivers for others.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extract functions which are managing logging sources
and backends into separate file: log_mgmt.
So far those functions were in log_core mixed with functions
specific to log message creation and log processing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There was an issue with receiving CTE packets when the time
slot has changed from 2us to 1us. After receiving the packets
when it tries to enable receiving of CTE, the validator
returns EINVAL error.
Source of the problem is "validate_cte_rx_params" function,
it calls DF_AOA_RX_1US_SUPPORT(df_ant_info.switch_sample_rates)
which is expanded to:
((df_ant_info.switch_sample_rates) & BIT((BT_HCI_LE_1US_AOA_RX)))
And due to definition of BT_HCI_LE_1US_AOA_RX in hci.h it will be:
((df_ant_info.switch_sample_rates) & BIT(BIT(2)))
So the BIT operation has executed two times.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
Microchip MCP7940N is a Real-Time Clock/Calendar. It operates on a I2C
bus. It can be used to set a calendar time and has two alarm channels.
When an alarm is asserted the state of the MPF pin of the MCP7940N will
change (depending on gpio active high/active low setting) to trigger an
interrupt.
Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
This reverts commit 40a5cf6016. Debug
information is no longer necessary as doc-publish workflow is now
working correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Introduce soc_port common functions. The sam0 pinmux driver was
refactored to use soc_port_pinmux_set common function.
This create the common base to implement sam0 pinctrl functions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Adds support for PWM LEDs (red, green, blue) to the mimxrt685_evk board
by adding devicetree nodes and aliases, and configuring the associated
pinmuxes. The red PWM LED is disabled by default because it's connected
to the same PWM channel as the blue PWM LED.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable debug mode and disable quiet option. It should help diagnosing
AWS S3 problems. Some prints have also been added to spot potential
problems.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
`github.event.workflow_run.head_branch` contains the actual release tag
on releases, so it is required. It does not affect the publication of
"latest".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add old APIs marked as deprecated. The API keep the same behavior as
before, so external users have time to migrate their codebase.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Explain device busy API name changes and provide an equivalence list to
ease migration.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Busy check APIs now return boolean type. Due to that change, the
function names have also been adjusted. The common name pattern for
boolean check type APIs is "PREFIX_is_CONDITION". For example,
"pm_device_is_busy". pm_device_busy_check has been renamed to
pm_device_is_busy and pm_device_any_busy_check to pm_device_is_any_busy.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
