- Use an enum for the available flags
- Use ATOMIC_DEFINE macro to declare the flag bit field
- Improve naming
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The test_dummy_device test has nothing to do with device busy testing,
so remove the calls to pm_device_busy_set/pm_device_busy_clear.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Publish action has been refactored into a workflow_run based action.
The action is now triggered after a successful doc-build workflow run
(only on main/release branches). The artifacts are downloaded from the
build run and published accordingly. Publish code has been simplified a
bit and PDF upload has been added.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Artifacts will be required for the publish workflow, so do not let the
build workflow succeed without them being uploaded correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Storing west version in a single place avoids keeping duplicates in each
job. Also added a note on why pinning version is important: west
docstrings are extracted from the installed version.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The pip cache should be discarded if any of the required dependencies
changes, so use the hash of the requirements file as a key source.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
xz compression reduces the html archive sice from ~350MB to ~90MB (at
the cost of more compression time). Compression has been moved to a
separate step.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow to override latexmk options via Makefile. Defaults match those in
the CMakeLists.txt.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some devicetre overlays do not reflect the recent rename to make NS
variants of boards with TF-M support have more consistent names; fix
it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
TI recently released a new version of the HDC2080 datasheet, which
slightly update the temperature conversion formula, with a temperature
offset of -40.5°C instead of -40°C. Adjust the code accordingly.
In addition the datasheet also describes a voltage dependent
compensation of -0.08°C/V above 1.8V, however it's not something easily
doable with the current sensor framework, so just ignore that part.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some STM32 series (l0, g0, f0) needs to enable clock of
DBGMCU peripheral, before accessing registers
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Microchip HAL update used by MEC152x projects with eSPI
definition changes. Remove hack from XEC ESPI driver since
the missing symbol is in the HAL.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The STM32 G0, G4, H7, L0, L4, WB and WL series have hardware support for
oversampling. This patch adds support for it, using the oversampling
value provided in the adc sequence. The result is shifted right
accordingly to not change the resolution of the measured value, like it
is done on other ADC drivers.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds the configuration to pass the testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f103rb board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass tes testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f207zg board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration and set the DTS to pass
the dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f429zi board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_l152re board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testscases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f091rc board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Create a shared macro to access the pinctrl_0 property. The pinctrl_0
property includes pinmux phandle, pin and alternate function.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Increase LOG_PROCESS_THREAD_STACK_SIZE for ARCv3 64 bit to
fix failing test
tests/subsys/logging/log_core_additional/logging.add.async
due to stack overflow.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This commit sets the below configuration when
tests/drivers/dma/chan_blen_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_TRANSFER_CHANNEL_NR_0=4
CONFIG_DMA_TRANSFER_CHANNEL_NR_1=2
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit sets the below configuration when
tests/drivers/dma/loop_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_LOOP_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR=4
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Driver does not correctly take ic out from sleep mode on init.
Added logic to update mode register on init to take the leddriver
out from sleep mode.
See datasheet for register details.
Fixes#37180
Signed-off-by: Daniel N. Hansten <dnh2000@gmail.com>
Busy simulator is using counter device and entropy device to
generate random cpu load. Counter device cofiguration can be
used to set cpu load interrupt priority and optional pin that
can be set during the load.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
