RXTO event is generated always after ENDRX and driver relies
on assumption that ENDRX event is handled before RXTO. However,
when interrupt is preempted after ENDRX check returned false
and RXTO event is already set handling order would be swapped.
Added addtional check to handle RXTO event only if ENDRX is not
set. If ENDRX is set, it means that it is not yet handled. RXTO
event is not cleared and interrupt will be triggered again and
ENDRX event will be handled first.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The lis2dw12 sensor can generate the TAP interrupt only on INT1,
while DRDY can be generated on both. The int-pin DT property
specifiy on which pin the DRDY (and not the TAP) can be generated.
This commit fix the way the trigger is set: first the driver checks
the trigger type (DRDY or TAP), then it uses the int-pin information
only in DRDY case but allows setting TAP regardless of int-pin (it
always routes it on INT1).
The previous code was first checking int-pin: if it was INT2 then
the driver refused setting TAP triggers.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit aligns lis2dw12 sensor driver to latest multi
instance sensor driver model.
In particular it makes use of the stmemsc common routines
and move ctx handler inside struct config, so that the
bus_init routines can be totally avoided.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Remove all odr values from Kconfig and always init it
at 12.5Hz. It is responsibility of application to set
the rate to a different value using SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move lis2dw12 trigger pulse configurations from Kconfigs to Device Tree.
Moreover the dts properties have been renamed as 'tap', which sounds a
better name to immediately catch the feature behind it. Since tap
threshold cannot be zero, this value (which is the default in dts
binding) is used to enable/disable the device feature per each axis.
The event can be generated on INT1 only.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use gpio_dt_spec structure (and related APIs) in config for configuring
the gpio used for drdy and pulse interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Create a common binding file that will be included by all bindings
handled by lis2dw12 driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a device node for the FMC controller found in stm32f427, f437 and
f446 devices, works fine with the current memc_stm32_sdram driver.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Default the option MEMC_STM32 to "y" when the device node is defined and
enabled, so that the driver is selected automatically when the board
supports it and MEMC is enabled.
Remove the default conditional on serise as it's redundant with the one
in soc/arm/st_stm32/common/Kconfig.defconfig.series.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for RT1170. The fuse register that holds
the unique device ID is different as compared to the
RT10XX series
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Added RT10xx and RT11xx configs
2. Added a new soc file for rt117x. There are clock differences
between the RT10xx and RT11xx series, hence the soc files
have been separated.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit resolves warning ARM_MPU & HW_STACK_PROTECTION
during build. The MCU in STm32_Mini_dev (black & blue) has
no MPU support, but MPU was still enabled in defconfigs which
was the reason behind warnings. This commit removes
ARM_MPU & HW_STACK_PROTECTION from defconfig for both
STm32_Mini_dev development boards.
fix: zephyrproject-rtos/zephyr#36408
Signed-off-by: Affrin Pinhero <affrin.pinhero@hcl.com>
The hci_le_remove_cig command shall only be sent as the
master/central. Implemented this by early termination in
bt_iso_cleanup as the slave/peripheral.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
coap_response_received returned NULL if the observe option was out of
order, however it makes more sense to return the coap_reply handler
without actually calling it.
Additionally the reorder check has been modified to partially match
the RFC.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new extension to support the :kconfig: role and .. kconfig::
directive. This removes the need of using :option:.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF5 802.15.4 driver tries to establish a rpmsg channel
with the network core, so the network core must be started
earlier. Therefore, decrease the priority level of the task
responsible for initializing the board.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
- bugfix: Accept initial tftp server reply from a port different than
the one used to establish the connection (typically 69) as mandated
by RFC 1350. Previous implementation was not standard compliant.
- bugfix: close socket in case of error or timeout.
- bugfix: Reset retransmit counter after receipt of a good packet.
- bugfix: Use CONFIG_TFTP_LOG_LEVEL to set log level.
- api: upon successful receipt of the file set `client.user_buf_size`
to the size of the file received.
- Restructure the code, comments.
- Limit usage of global variables.
- Limit usage of `goto`.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
UART CR_SIN interrupt enable/disable are invoked when CONFIG_PM enable.
This removes the guard for UART CR_SIN interrupt enable/disable to fix
the build issue.
Fixed#36520
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
bits property indicates the number of in-use slots of available slots
for GPIOS. We have a similar property ngpios in gpio-controller.yaml,
we will use ngpios to calculate port_pin_mask. Let's remove bits and
only use ngpios.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Enable Instruction Cache
Warning: no flash driver yet available for STM32l5
But cache coherency management (cache invalidate)
will be rerquired when implementing flash driver.
ICAHE must be disabled for any flash write opeartion.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Enable Instruction cache accelerator for Cortex M4
first 1MB of Flash.
As per Reference Manual: no need for cache coherency management
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART cache before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Similar to #32218 and #34032
Flush ART caches before erase operation
(preparing ART activation)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Not enough time to review changes in these subsystems.
Propose to have VenkatKotakonda as KSCAN subsystem owner instead.
Adding SoC-specific driver owners.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This implement the same flush cache functionality already present in the
other stm32 series flash drivers, used to avoid bus errors when writing
big chunks of data to the flash.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
